qemu-e2k/hw/gpio/max7310.c

219 lines
5.1 KiB
C
Raw Normal View History

/*
* MAX7310 8-port GPIO expansion chip.
*
* Copyright (c) 2006 Openedhand Ltd.
* Written by Andrzej Zaborowski <balrog@zabor.org>
*
* This file is licensed under GNU GPL.
*/
#include "qemu/osdep.h"
#include "hw/i2c/i2c.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qom/object.h"
#define TYPE_MAX7310 "max7310"
OBJECT_DECLARE_SIMPLE_TYPE(MAX7310State, MAX7310)
struct MAX7310State {
I2CSlave parent_obj;
int i2c_command_byte;
int len;
uint8_t level;
uint8_t direction;
uint8_t polarity;
uint8_t status;
uint8_t command;
qemu_irq handler[8];
qemu_irq *gpio_in;
};
static void max7310_reset(DeviceState *dev)
{
MAX7310State *s = MAX7310(dev);
s->level &= s->direction;
s->direction = 0xff;
s->polarity = 0xf0;
s->status = 0x01;
s->command = 0x00;
}
static uint8_t max7310_rx(I2CSlave *i2c)
{
MAX7310State *s = MAX7310(i2c);
switch (s->command) {
case 0x00: /* Input port */
return s->level ^ s->polarity;
case 0x01: /* Output port */
return s->level & ~s->direction;
case 0x02: /* Polarity inversion */
return s->polarity;
case 0x03: /* Configuration */
return s->direction;
case 0x04: /* Timeout */
return s->status;
case 0xff: /* Reserved */
return 0xff;
default:
qemu_log_mask(LOG_UNIMP, "%s: Unsupported register 0x02%" PRIx8 "\n",
__func__, s->command);
break;
}
return 0xff;
}
static int max7310_tx(I2CSlave *i2c, uint8_t data)
{
MAX7310State *s = MAX7310(i2c);
uint8_t diff;
int line;
if (s->len ++ > 1) {
#ifdef VERBOSE
printf("%s: message too long (%i bytes)\n", __func__, s->len);
#endif
return 1;
}
if (s->i2c_command_byte) {
s->command = data;
s->i2c_command_byte = 0;
return 0;
}
switch (s->command) {
case 0x01: /* Output port */
for (diff = (data ^ s->level) & ~s->direction; diff;
diff &= ~(1 << line)) {
line = ctz32(diff);
if (s->handler[line])
qemu_set_irq(s->handler[line], (data >> line) & 1);
}
s->level = (s->level & s->direction) | (data & ~s->direction);
break;
case 0x02: /* Polarity inversion */
s->polarity = data;
break;
case 0x03: /* Configuration */
s->level &= ~(s->direction ^ data);
s->direction = data;
break;
case 0x04: /* Timeout */
s->status = data;
break;
case 0x00: /* Input port - ignore writes */
avoid TABs in files that only contain a few Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-13 23:37:37 +01:00
break;
default:
qemu_log_mask(LOG_UNIMP, "%s: Unsupported register 0x02%" PRIx8 "\n",
__func__, s->command);
return 1;
}
return 0;
}
static int max7310_event(I2CSlave *i2c, enum i2c_event event)
{
MAX7310State *s = MAX7310(i2c);
s->len = 0;
switch (event) {
case I2C_START_SEND:
s->i2c_command_byte = 1;
break;
case I2C_FINISH:
#ifdef VERBOSE
if (s->len == 1)
printf("%s: message too short (%i bytes)\n", __func__, s->len);
#endif
break;
default:
break;
}
return 0;
}
static const VMStateDescription vmstate_max7310 = {
.name = "max7310",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_INT32(i2c_command_byte, MAX7310State),
VMSTATE_INT32(len, MAX7310State),
VMSTATE_UINT8(level, MAX7310State),
VMSTATE_UINT8(direction, MAX7310State),
VMSTATE_UINT8(polarity, MAX7310State),
VMSTATE_UINT8(status, MAX7310State),
VMSTATE_UINT8(command, MAX7310State),
VMSTATE_I2C_SLAVE(parent_obj, MAX7310State),
VMSTATE_END_OF_LIST()
}
};
static void max7310_gpio_set(void *opaque, int line, int level)
{
MAX7310State *s = (MAX7310State *) opaque;
assert(line >= 0 && line < ARRAY_SIZE(s->handler));
if (level)
s->level |= s->direction & (1 << line);
else
s->level &= ~(s->direction & (1 << line));
}
/* MAX7310 is SMBus-compatible (can be used with only SMBus protocols),
* but also accepts sequences that are not SMBus so return an I2C device. */
static void max7310_realize(DeviceState *dev, Error **errp)
{
I2CSlave *i2c = I2C_SLAVE(dev);
MAX7310State *s = MAX7310(dev);
qdev_init_gpio_in(&i2c->qdev, max7310_gpio_set, 8);
qdev_init_gpio_out(&i2c->qdev, s->handler, 8);
}
static void max7310_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
dc->realize = max7310_realize;
k->event = max7310_event;
k->recv = max7310_rx;
k->send = max7310_tx;
dc->reset = max7310_reset;
dc->vmsd = &vmstate_max7310;
}
static const TypeInfo max7310_info = {
.name = TYPE_MAX7310,
.parent = TYPE_I2C_SLAVE,
.instance_size = sizeof(MAX7310State),
.class_init = max7310_class_init,
};
static void max7310_register_types(void)
{
type_register_static(&max7310_info);
}
type_init(max7310_register_types)