qemu-e2k/osdep.h

150 lines
3.5 KiB
C
Raw Normal View History

#ifndef QEMU_OSDEP_H
#define QEMU_OSDEP_H
#include <stdarg.h>
#include <stddef.h>
#ifdef __OpenBSD__
#include <sys/types.h>
#include <sys/signal.h>
#endif
#include <sys/time.h>
#ifndef glue
#define xglue(x, y) x ## y
#define glue(x, y) xglue(x, y)
#define stringify(s) tostring(s)
#define tostring(s) #s
#endif
#ifndef likely
#if __GNUC__ < 3
#define __builtin_expect(x, n) (x)
#endif
#define likely(x) __builtin_expect(!!(x), 1)
#define unlikely(x) __builtin_expect(!!(x), 0)
#endif
#ifndef container_of
#define container_of(ptr, type, member) ({ \
const typeof(((type *) 0)->member) *__mptr = (ptr); \
(type *) ((char *) __mptr - offsetof(type, member));})
#endif
/* Convert from a base type to a parent type, with compile time checking. */
#ifdef __GNUC__
#define DO_UPCAST(type, field, dev) ( __extension__ ( { \
char __attribute__((unused)) offset_must_be_zero[ \
-offsetof(type, field)]; \
container_of(dev, type, field);}))
#else
#define DO_UPCAST(type, field, dev) container_of(dev, type, field)
#endif
#define typeof_field(type, field) typeof(((type *)0)->field)
#define type_check(t1,t2) ((t1*)0 - (t2*)0)
#ifndef MIN
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#endif
#ifndef MAX
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#endif
#ifndef DIV_ROUND_UP
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#endif
#ifndef ARRAY_SIZE
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif
#ifndef always_inline
#if !((__GNUC__ < 3) || defined(__APPLE__))
#ifdef __OPTIMIZE__
#define inline __attribute__ (( always_inline )) __inline__
#endif
#endif
#else
#define inline always_inline
#endif
#ifdef __i386__
#define REGPARM __attribute((regparm(3)))
#else
#define REGPARM
#endif
#define qemu_printf printf
int qemu_daemon(int nochdir, int noclose);
void *qemu_memalign(size_t alignment, size_t size);
void *qemu_vmalloc(size_t size);
void qemu_vfree(void *ptr);
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
#define QEMU_MADV_INVALID -1
#if defined(CONFIG_MADVISE)
#define QEMU_MADV_WILLNEED MADV_WILLNEED
#define QEMU_MADV_DONTNEED MADV_DONTNEED
#ifdef MADV_DONTFORK
#define QEMU_MADV_DONTFORK MADV_DONTFORK
#else
#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID
#endif
#ifdef MADV_MERGEABLE
#define QEMU_MADV_MERGEABLE MADV_MERGEABLE
#else
#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID
#endif
#elif defined(CONFIG_POSIX_MADVISE)
#define QEMU_MADV_WILLNEED POSIX_MADV_WILLNEED
#define QEMU_MADV_DONTNEED POSIX_MADV_DONTNEED
#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID
#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID
#else /* no-op */
#define QEMU_MADV_WILLNEED QEMU_MADV_INVALID
#define QEMU_MADV_DONTNEED QEMU_MADV_INVALID
#define QEMU_MADV_DONTFORK QEMU_MADV_INVALID
#define QEMU_MADV_MERGEABLE QEMU_MADV_INVALID
#endif
int qemu_madvise(void *addr, size_t len, int advice);
#if defined(__HAIKU__) && defined(__i386__)
#define FMT_pid "%ld"
#elif defined(WIN64)
#define FMT_pid "%" PRId64
#else
#define FMT_pid "%d"
#endif
int qemu_create_pidfile(const char *filename);
int qemu_get_thread_id(void);
#ifdef _WIN32
static inline void qemu_timersub(const struct timeval *val1,
const struct timeval *val2,
struct timeval *res)
{
res->tv_sec = val1->tv_sec - val2->tv_sec;
if (val1->tv_usec < val2->tv_usec) {
res->tv_sec--;
res->tv_usec = val1->tv_usec - val2->tv_usec + 1000 * 1000;
} else {
res->tv_usec = val1->tv_usec - val2->tv_usec;
}
}
#else
#define qemu_timersub timersub
#endif
#endif