qemu-e2k/hw/ppc/mac_oldworld.c

456 lines
15 KiB
C
Raw Normal View History

/*
* QEMU OldWorld PowerMac (currently ~G3 Beige) hardware System Emulator
*
* Copyright (c) 2004-2007 Fabrice Bellard
* Copyright (c) 2007 Jocelyn Mayer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/datadir.h"
#include "qemu/units.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "hw/ppc/ppc.h"
#include "hw/qdev-properties.h"
#include "mac.h"
#include "hw/input/adb.h"
#include "sysemu/sysemu.h"
#include "net/net.h"
#include "hw/isa/isa.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_host.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/char/escc.h"
#include "hw/misc/macio/macio.h"
#include "hw/loader.h"
#include "hw/fw-path-provider.h"
#include "elf.h"
#include "qemu/error-report.h"
#include "sysemu/kvm.h"
#include "sysemu/reset.h"
#include "kvm_ppc.h"
#define MAX_IDE_BUS 2
#define CFG_ADDR 0xf0000510
#define TBFREQ 16600000UL
#define CLOCKFREQ 266000000UL
#define BUSFREQ 66000000UL
#define NDRV_VGA_FILENAME "qemu_vga.ndrv"
#define GRACKLE_BASE 0xfec00000
#define PROM_BASE 0xffc00000
#define PROM_SIZE (4 * MiB)
static void fw_cfg_boot_set(void *opaque, const char *boot_device,
Error **errp)
{
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
}
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
{
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
}
static void ppc_heathrow_reset(void *opaque)
{
PowerPCCPU *cpu = opaque;
cpu_reset(CPU(cpu));
}
static void ppc_heathrow_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *bios_name = machine->firmware ?: PROM_FILENAME;
const char *boot_device = machine->boot_config.order;
PowerPCCPU *cpu = NULL;
CPUPPCState *env = NULL;
char *filename;
int i;
MemoryRegion *bios = g_new(MemoryRegion, 1);
uint32_t kernel_base, initrd_base, cmdline_base = 0;
int32_t kernel_size, initrd_size;
PCIBus *pci_bus;
PCIDevice *macio;
MACIOIDEState *macio_ide;
ESCCState *escc;
SysBusDevice *s;
DeviceState *dev, *pic_dev, *grackle_dev;
BusState *adb_bus;
uint64_t bios_addr;
int bios_size;
unsigned int smp_cpus = machine->smp.cpus;
uint16_t ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
uint64_t tbfreq;
/* init CPUs */
for (i = 0; i < smp_cpus; i++) {
cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
/* Set time-base frequency to 16.6 Mhz */
cpu_ppc_tb_init(env, TBFREQ);
qemu_register_reset(ppc_heathrow_reset, cpu);
}
/* allocate RAM */
if (ram_size > 2047 * MiB) {
error_report("Too much memory for this machine: %" PRId64 " MB, "
"maximum 2047 MB", ram_size / MiB);
exit(1);
}
memory_region_add_subregion(get_system_memory(), 0, machine->ram);
/* allocate and load firmware ROM */
memory_region_init_rom(bios, NULL, "ppc_heathrow.bios", PROM_SIZE,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 16:51:43 +02:00
&error_fatal);
memory_region_add_subregion(get_system_memory(), PROM_BASE, bios);
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
/* Load OpenBIOS (ELF) */
bios_size = load_elf(filename, NULL, NULL, NULL, NULL, &bios_addr,
NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
/* Unfortunately, load_elf sign-extends reading elf32 */
bios_addr = (uint32_t)bios_addr;
if (bios_size <= 0) {
/* or if could not load ELF try loading a binary ROM image */
bios_size = load_image_targphys(filename, PROM_BASE, PROM_SIZE);
bios_addr = PROM_BASE;
}
g_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_addr - PROM_BASE + bios_size > PROM_SIZE) {
error_report("could not load PowerPC bios '%s'", bios_name);
exit(1);
}
if (machine->kernel_filename) {
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_base = KERNEL_LOAD_ADDR;
kernel_size = load_elf(machine->kernel_filename, NULL,
translate_kernel_address, NULL, NULL, NULL,
NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
if (kernel_size < 0)
kernel_size = load_aout(machine->kernel_filename, kernel_base,
ram_size - kernel_base, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(machine->kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
error_report("could not load kernel '%s'",
machine->kernel_filename);
exit(1);
}
/* load initrd */
if (machine->initrd_filename) {
initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size +
KERNEL_GAP);
initrd_size = load_image_targphys(machine->initrd_filename,
initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
error_report("could not load initial ram disk '%s'",
machine->initrd_filename);
exit(1);
}
cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
} else {
initrd_base = 0;
initrd_size = 0;
cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
for (i = 0; boot_device[i] != '\0'; i++) {
/* TOFIX: for now, the second IDE channel is not properly
* used by OHW. The Mac floppy disk are not emulated.
* For now, OHW cannot boot from the network.
*/
#if 0
if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
#else
if (boot_device[i] >= 'c' && boot_device[i] <= 'd') {
ppc_boot_device = boot_device[i];
break;
}
#endif
}
if (ppc_boot_device == '\0') {
hw/ppc: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines were then manually tweaked to pass checkpatch and some curly braces were added to match QEMU style. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-ppc@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-10-armbru@redhat.com>
2018-02-03 09:43:10 +01:00
error_report("No valid boot device for G3 Beige machine");
exit(1);
}
}
/* Timebase Frequency */
if (kvm_enabled()) {
tbfreq = kvmppc_get_tbfreq();
} else {
tbfreq = TBFREQ;
}
/* Grackle PCI host bridge */
grackle_dev = qdev_new(TYPE_GRACKLE_PCI_HOST_BRIDGE);
qdev_prop_set_uint32(grackle_dev, "ofw-addr", 0x80000000);
s = SYS_BUS_DEVICE(grackle_dev);
sysbus_realize_and_unref(s, &error_fatal);
sysbus_mmio_map(s, 0, GRACKLE_BASE);
sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000);
/* PCI hole */
memory_region_add_subregion(get_system_memory(), 0x80000000ULL,
sysbus_mmio_get_region(s, 2));
/* Register 2 MB of ISA IO space */
memory_region_add_subregion(get_system_memory(), 0xfe000000,
sysbus_mmio_get_region(s, 3));
pci_bus = PCI_HOST_BRIDGE(grackle_dev)->bus;
/* MacIO */
macio = pci_new(PCI_DEVFN(16, 0), TYPE_OLDWORLD_MACIO);
dev = DEVICE(macio);
qdev_prop_set_uint64(dev, "frequency", tbfreq);
escc = ESCC(object_resolve_path_component(OBJECT(macio), "escc"));
qdev_prop_set_chr(DEVICE(escc), "chrA", serial_hd(0));
qdev_prop_set_chr(DEVICE(escc), "chrB", serial_hd(1));
pci_realize_and_unref(macio, pci_bus, &error_fatal);
pic_dev = DEVICE(object_resolve_path_component(OBJECT(macio), "pic"));
for (i = 0; i < 4; i++) {
qdev_connect_gpio_out(grackle_dev, i,
qdev_get_gpio_in(pic_dev, 0x15 + i));
}
/* Connect the heathrow PIC outputs to the 6xx bus */
for (i = 0; i < smp_cpus; i++) {
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
/* XXX: we register only 1 output pin for heathrow PIC */
qdev_connect_gpio_out(pic_dev, 0,
qdev_get_gpio_in(DEVICE(cpu), PPC6xx_INPUT_INT));
break;
default:
error_report("Bus model not supported on OldWorld Mac machine");
exit(1);
}
}
pci_vga_init(pci_bus);
for (i = 0; i < nb_nics; i++) {
pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
}
/* MacIO IDE */
ide_drive_get(hd, ARRAY_SIZE(hd));
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[0]"));
macio_ide_init_drives(macio_ide, hd);
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[1]"));
macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]);
/* MacIO CUDA/ADB */
dev = DEVICE(object_resolve_path_component(OBJECT(macio), "cuda"));
adb_bus = qdev_get_child_bus(dev, "adb.0");
qdev: Convert uses of qdev_create() with Coccinelle This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-10 07:31:58 +02:00
dev = qdev_new(TYPE_ADB_KEYBOARD);
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
dev = qdev_new(TYPE_ADB_MOUSE);
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
if (machine_usb(machine)) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
/* No PCI init: the BIOS will do it */
qdev: Convert uses of qdev_create() with Coccinelle This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-10 07:31:58 +02:00
dev = qdev_new(TYPE_FW_CFG_MEM);
fw_cfg = FW_CFG(dev);
qdev_prop_set_uint32(dev, "data_width", 1);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
OBJECT(fw_cfg));
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
sysbus_mmio_map(s, 0, CFG_ADDR);
sysbus_mmio_map(s, 1, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)machine->smp.max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
machine->kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
if (kvm_enabled()) {
uint8_t *hypercall;
hypercall = g_malloc(16);
kvmppc_get_hypercall(env, hypercall, 16);
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
}
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq);
/* Mac OS X requires a "known good" clock-frequency value; pass it one. */
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ);
/* MacOS NDRV VGA driver */
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME);
if (filename) {
gchar *ndrv_file;
gsize ndrv_size;
if (g_file_get_contents(filename, &ndrv_file, &ndrv_size, NULL)) {
fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size);
}
g_free(filename);
}
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
/*
* Implementation of an interface to adjust firmware path
* for the bootindex property handling.
*/
static char *heathrow_fw_dev_path(FWPathProvider *p, BusState *bus,
DeviceState *dev)
{
PCIDevice *pci;
MACIOIDEState *macio_ide;
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-oldworld")) {
pci = PCI_DEVICE(dev);
return g_strdup_printf("mac-io@%x", PCI_SLOT(pci->devfn));
}
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-ide")) {
macio_ide = MACIO_IDE(dev);
return g_strdup_printf("ata-3@%x", macio_ide->addr);
}
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-hd")) {
return g_strdup("disk");
}
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-cd")) {
return g_strdup("cdrom");
}
if (!strcmp(object_get_typename(OBJECT(dev)), "virtio-blk-device")) {
return g_strdup("disk");
}
return NULL;
}
static int heathrow_kvm_type(MachineState *machine, const char *arg)
{
/* Always force PR KVM */
return 2;
}
static void heathrow_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc);
mc->desc = "Heathrow based PowerMAC";
mc->init = ppc_heathrow_init;
mc->block_default_type = IF_IDE;
/* SMP is not supported currently */
mc->max_cpus = 1;
#ifndef TARGET_PPC64
mc->is_default = true;
#endif
/* TOFIX "cad" when Mac floppy is implemented */
mc->default_boot_order = "cd";
mc->kvm_type = heathrow_kvm_type;
mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("750_v3.1");
mc->default_display = "std";
mc->ignore_boot_device_suffixes = true;
mc->default_ram_id = "ppc_heathrow.ram";
fwc->get_dev_path = heathrow_fw_dev_path;
}
static const TypeInfo ppc_heathrow_machine_info = {
.name = MACHINE_TYPE_NAME("g3beige"),
.parent = TYPE_MACHINE,
.class_init = heathrow_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_FW_PATH_PROVIDER },
{ }
},
};
static void ppc_heathrow_register_types(void)
{
type_register_static(&ppc_heathrow_machine_info);
}
type_init(ppc_heathrow_register_types);