qemu-e2k/hw/ssi-sd.c

203 lines
6.6 KiB
C
Raw Normal View History

/*
* SSI to SD card adapter.
*
* Copyright (c) 2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licenced under the GPL.
*/
#include "hw.h"
#include "sd.h"
//#define DEBUG_SSI_SD 1
#ifdef DEBUG_SSI_SD
#define DPRINTF(fmt, args...) \
do { printf("ssi_sd: " fmt , ##args); } while (0)
#define BADF(fmt, args...) \
do { fprintf(stderr, "ssi_sd: error: " fmt , ##args); exit(1);} while (0)
#else
#define DPRINTF(fmt, args...) do {} while(0)
#define BADF(fmt, args...) \
do { fprintf(stderr, "ssi_sd: error: " fmt , ##args);} while (0)
#endif
typedef enum {
SSI_SD_CMD,
SSI_SD_CMDARG,
SSI_SD_RESPONSE,
SSI_SD_DATA_START,
SSI_SD_DATA_READ,
} ssi_sd_mode;
typedef struct {
ssi_sd_mode mode;
int cmd;
uint8_t cmdarg[4];
uint8_t response[5];
int arglen;
int response_pos;
int stopping;
SDState *sd;
} ssi_sd_state;
/* State word bits. */
#define SSI_SDR_LOCKED 0x0001
#define SSI_SDR_WP_ERASE 0x0002
#define SSI_SDR_ERROR 0x0004
#define SSI_SDR_CC_ERROR 0x0008
#define SSI_SDR_ECC_FAILED 0x0010
#define SSI_SDR_WP_VIOLATION 0x0020
#define SSI_SDR_ERASE_PARAM 0x0040
#define SSI_SDR_OUT_OF_RANGE 0x0080
#define SSI_SDR_IDLE 0x0100
#define SSI_SDR_ERASE_RESET 0x0200
#define SSI_SDR_ILLEGAL_COMMAND 0x0400
#define SSI_SDR_COM_CRC_ERROR 0x0800
#define SSI_SDR_ERASE_SEQ_ERROR 0x1000
#define SSI_SDR_ADDRESS_ERROR 0x2000
#define SSI_SDR_PARAMETER_ERROR 0x4000
int ssi_sd_xfer(void *opaque, int val)
{
ssi_sd_state *s = (ssi_sd_state *)opaque;
/* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */
if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
s->mode = SSI_SD_CMD;
/* There must be at least one byte delay before the card responds. */
s->stopping = 1;
}
switch (s->mode) {
case SSI_SD_CMD:
if (val == 0xff) {
DPRINTF("NULL command\n");
return 0xff;
}
s->cmd = val & 0x3f;
s->mode = SSI_SD_CMDARG;
s->arglen = 0;
return 0xff;
case SSI_SD_CMDARG:
if (s->arglen == 4) {
struct sd_request_s request;
uint8_t longresp[16];
/* FIXME: Check CRC. */
request.cmd = s->cmd;
request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16)
| (s->cmdarg[2] << 8) | s->cmdarg[3];
DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
s->arglen = sd_do_command(s->sd, &request, longresp);
if (s->arglen <= 0) {
s->arglen = 1;
s->response[0] = 4;
DPRINTF("SD command failed\n");
} else if (s->cmd == 58) {
/* CMD58 returns R3 response (OCR) */
DPRINTF("Returned OCR\n");
s->arglen = 5;
s->response[0] = 1;
memcpy(&s->response[1], longresp, 4);
} else if (s->arglen != 4) {
BADF("Unexpected response to cmd %d\n", s->cmd);
/* Illegal command is about as near as we can get. */
s->arglen = 1;
s->response[0] = 4;
} else {
/* All other commands return status. */
uint32_t cardstatus;
uint16_t status;
/* CMD13 returns a 2-byte statuse work. Other commands
only return the first byte. */
s->arglen = (s->cmd == 13) ? 2 : 1;
cardstatus = (longresp[0] << 24) | (longresp[1] << 16)
| (longresp[2] << 8) | longresp[3];
status = 0;
if (((cardstatus >> 9) & 0xf) < 4)
status |= SSI_SDR_IDLE;
if (cardstatus & ERASE_RESET)
status |= SSI_SDR_ERASE_RESET;
if (cardstatus & ILLEGAL_COMMAND)
status |= SSI_SDR_ILLEGAL_COMMAND;
if (cardstatus & COM_CRC_ERROR)
status |= SSI_SDR_COM_CRC_ERROR;
if (cardstatus & ERASE_SEQ_ERROR)
status |= SSI_SDR_ERASE_SEQ_ERROR;
if (cardstatus & ADDRESS_ERROR)
status |= SSI_SDR_ADDRESS_ERROR;
if (cardstatus & CARD_IS_LOCKED)
status |= SSI_SDR_LOCKED;
if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP))
status |= SSI_SDR_WP_ERASE;
if (cardstatus & SD_ERROR)
status |= SSI_SDR_ERROR;
if (cardstatus & CC_ERROR)
status |= SSI_SDR_CC_ERROR;
if (cardstatus & CARD_ECC_FAILED)
status |= SSI_SDR_ECC_FAILED;
if (cardstatus & WP_VIOLATION)
status |= SSI_SDR_WP_VIOLATION;
if (cardstatus & ERASE_PARAM)
status |= SSI_SDR_ERASE_PARAM;
if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE))
status |= SSI_SDR_OUT_OF_RANGE;
/* ??? Don't know what Parameter Error really means, so
assume it's set if the second byte is nonzero. */
if (status & 0xff)
status |= SSI_SDR_PARAMETER_ERROR;
s->response[0] = status >> 8;
s->response[1] = status;
DPRINTF("Card status 0x%02x\n", status);
}
s->mode = SSI_SD_RESPONSE;
s->response_pos = 0;
} else {
s->cmdarg[s->arglen++] = val;
}
return 0xff;
case SSI_SD_RESPONSE:
if (s->stopping) {
s->stopping = 0;
return 0xff;
}
if (s->response_pos < s->arglen) {
DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
return s->response[s->response_pos++];
}
if (sd_data_ready(s->sd)) {
DPRINTF("Data read\n");
s->mode = SSI_SD_DATA_START;
} else {
DPRINTF("End of command\n");
s->mode = SSI_SD_CMD;
}
return 0xff;
case SSI_SD_DATA_START:
DPRINTF("Start read block\n");
s->mode = SSI_SD_DATA_READ;
return 0xfe;
case SSI_SD_DATA_READ:
val = sd_read_data(s->sd);
if (!sd_data_ready(s->sd)) {
DPRINTF("Data read end\n");
s->mode = SSI_SD_CMD;
}
return val;
}
/* Should never happen. */
return 0xff;
}
void *ssi_sd_init(BlockDriverState *bs)
{
ssi_sd_state *s;
s = (ssi_sd_state *)qemu_mallocz(sizeof(ssi_sd_state));
s->mode = SSI_SD_CMD;
s->sd = sd_init(bs, 1);
return s;
}