iostatus: move BlockdevOnError declaration to QAPI

This will let block-stream reuse the enum.  Places that used the enums
are renamed accordingly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block.c

@@ -4209,9 +4209,9 @@ void bdrv_iostatus_enable(BlockDriverState *bs)
 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
 {
     return (bs->iostatus_enabled &&
-           (bs->on_write_error == BLOCK_ERR_STOP_ENOSPC ||
+           (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
-            bs->on_write_error == BLOCK_ERR_STOP_ANY    ||
+            bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
-            bs->on_read_error == BLOCK_ERR_STOP_ANY));
+            bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
 }
 
 void bdrv_iostatus_disable(BlockDriverState *bs)

block.h

@@ -90,11 +90,6 @@ typedef struct BlockDevOps {
 #define BDRV_SECTOR_SIZE   (1ULL << BDRV_SECTOR_BITS)
 #define BDRV_SECTOR_MASK   ~(BDRV_SECTOR_SIZE - 1)
 
-typedef enum {
-    BLOCK_ERR_REPORT, BLOCK_ERR_IGNORE, BLOCK_ERR_STOP_ENOSPC,
-    BLOCK_ERR_STOP_ANY
-} BlockdevOnError;
-
 typedef enum {
     BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
 } BlockErrorAction;

block/commit.c

@@ -34,7 +34,7 @@ typedef struct CommitBlockJob {
     BlockDriverState *active;
     BlockDriverState *top;
     BlockDriverState *base;
-    BlockErrorAction on_error;
+    BlockdevOnError on_error;
     int base_flags;
     int orig_overlay_flags;
 } CommitBlockJob;
@@ -126,9 +126,9 @@ wait:
             bytes_written += n * BDRV_SECTOR_SIZE;
         }
         if (ret < 0) {
-            if (s->on_error == BLOCK_ERR_STOP_ANY    ||
+            if (s->on_error == BLOCKDEV_ON_ERROR_STOP ||
-                s->on_error == BLOCK_ERR_REPORT      ||
+                s->on_error == BLOCKDEV_ON_ERROR_REPORT||
-                (s->on_error == BLOCK_ERR_STOP_ENOSPC && ret == -ENOSPC)) {
+                (s->on_error == BLOCKDEV_ON_ERROR_ENOSPC && ret == -ENOSPC)) {
                 goto exit_free_buf;
             } else {
                 n = 0;
@@ -182,7 +182,7 @@ static BlockJobType commit_job_type = {
 
 void commit_start(BlockDriverState *bs, BlockDriverState *base,
                   BlockDriverState *top, int64_t speed,
-                  BlockErrorAction on_error, BlockDriverCompletionFunc *cb,
+                  BlockdevOnError on_error, BlockDriverCompletionFunc *cb,
                   void *opaque, Error **errp)
 {
     CommitBlockJob *s;
@@ -192,8 +192,8 @@ void commit_start(BlockDriverState *bs, BlockDriverState *base,
     BlockDriverState *overlay_bs;
     Error *local_err = NULL;
 
-    if ((on_error == BLOCK_ERR_STOP_ANY ||
+    if ((on_error == BLOCKDEV_ON_ERROR_STOP ||
-         on_error == BLOCK_ERR_STOP_ENOSPC) &&
+         on_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
         !bdrv_iostatus_is_enabled(bs)) {
         error_set(errp, QERR_INVALID_PARAMETER_COMBINATION);
         return;

block_int.h

@@ -323,7 +323,7 @@ void stream_start(BlockDriverState *bs, BlockDriverState *base,
  */
 void commit_start(BlockDriverState *bs, BlockDriverState *base,
                  BlockDriverState *top, int64_t speed,
-                 BlockErrorAction on_error, BlockDriverCompletionFunc *cb,
+                 BlockdevOnError on_error, BlockDriverCompletionFunc *cb,
                  void *opaque, Error **errp);
 
 #endif /* BLOCK_INT_H */

blockdev.c

@@ -241,13 +241,13 @@ static void drive_put_ref_bh_schedule(DriveInfo *dinfo)
 static int parse_block_error_action(const char *buf, int is_read)
 {
     if (!strcmp(buf, "ignore")) {
-        return BLOCK_ERR_IGNORE;
+        return BLOCKDEV_ON_ERROR_IGNORE;
     } else if (!is_read && !strcmp(buf, "enospc")) {
-        return BLOCK_ERR_STOP_ENOSPC;
+        return BLOCKDEV_ON_ERROR_ENOSPC;
     } else if (!strcmp(buf, "stop")) {
-        return BLOCK_ERR_STOP_ANY;
+        return BLOCKDEV_ON_ERROR_STOP;
     } else if (!strcmp(buf, "report")) {
-        return BLOCK_ERR_REPORT;
+        return BLOCKDEV_ON_ERROR_REPORT;
     } else {
         error_report("'%s' invalid %s error action",
                      buf, is_read ? "read" : "write");
@@ -433,7 +433,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
         return NULL;
     }
 
-    on_write_error = BLOCK_ERR_STOP_ENOSPC;
+    on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
     if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
         if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
             error_report("werror is not supported by this bus type");
@@ -446,7 +446,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
         }
     }
 
-    on_read_error = BLOCK_ERR_REPORT;
+    on_read_error = BLOCKDEV_ON_ERROR_REPORT;
     if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
         if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type != IF_NONE) {
             error_report("rerror is not supported by this bus type");
@@ -1143,7 +1143,7 @@ void qmp_block_commit(const char *device,
     /* This will be part of the QMP command, if/when the
      * BlockdevOnError change for blkmirror makes it in
      */
-    BlockErrorAction on_error = BLOCK_ERR_REPORT;
+    BlockdevOnError on_error = BLOCKDEV_ON_ERROR_REPORT;
 
     /* drain all i/o before commits */
     bdrv_drain_all();

hw/fdc.c

@@ -1994,11 +1994,11 @@ static int fdctrl_connect_drives(FDCtrl *fdctrl)
         drive->fdctrl = fdctrl;
 
         if (drive->bs) {
-            if (bdrv_get_on_error(drive->bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
+            if (bdrv_get_on_error(drive->bs, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
                 error_report("fdc doesn't support drive option werror");
                 return -1;
             }
-            if (bdrv_get_on_error(drive->bs, 1) != BLOCK_ERR_REPORT) {
+            if (bdrv_get_on_error(drive->bs, 1) != BLOCKDEV_ON_ERROR_REPORT) {
                 error_report("fdc doesn't support drive option rerror");
                 return -1;
             }

hw/ide/core.c

@@ -559,13 +559,13 @@ static int ide_handle_rw_error(IDEState *s, int error, int op)
     int is_read = (op & BM_STATUS_RETRY_READ);
     BlockdevOnError action = bdrv_get_on_error(s->bs, is_read);
 
-    if (action == BLOCK_ERR_IGNORE) {
+    if (action == BLOCKDEV_ON_ERROR_IGNORE) {
         bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_IGNORE, is_read);
         return 0;
     }
 
-    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
+    if ((error == ENOSPC && action == BLOCKDEV_ON_ERROR_ENOSPC)
-            || action == BLOCK_ERR_STOP_ANY) {
+            || action == BLOCKDEV_ON_ERROR_STOP) {
         s->bus->dma->ops->set_unit(s->bus->dma, s->unit);
         s->bus->error_status = op;
         bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_STOP, is_read);

hw/scsi-disk.c

@@ -390,13 +390,13 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
     BlockdevOnError action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
 
-    if (action == BLOCK_ERR_IGNORE) {
+    if (action == BLOCKDEV_ON_ERROR_IGNORE) {
         bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
         return 0;
     }
 
-    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
+    if ((error == ENOSPC && action == BLOCKDEV_ON_ERROR_ENOSPC)
-            || action == BLOCK_ERR_STOP_ANY) {
+            || action == BLOCKDEV_ON_ERROR_STOP) {
 
         bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
         vm_stop(RUN_STATE_IO_ERROR);

hw/scsi-generic.c

@@ -400,11 +400,11 @@ static int scsi_generic_initfn(SCSIDevice *s)
         return -1;
     }
 
-    if (bdrv_get_on_error(s->conf.bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
+    if (bdrv_get_on_error(s->conf.bs, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
         error_report("Device doesn't support drive option werror");
         return -1;
     }
-    if (bdrv_get_on_error(s->conf.bs, 1) != BLOCK_ERR_REPORT) {
+    if (bdrv_get_on_error(s->conf.bs, 1) != BLOCKDEV_ON_ERROR_REPORT) {
         error_report("Device doesn't support drive option rerror");
         return -1;
     }

hw/virtio-blk.c

@@ -69,13 +69,13 @@ static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
     BlockdevOnError action = bdrv_get_on_error(req->dev->bs, is_read);
     VirtIOBlock *s = req->dev;
 
-    if (action == BLOCK_ERR_IGNORE) {
+    if (action == BLOCKDEV_ON_ERROR_IGNORE) {
         bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_IGNORE, is_read);
         return 0;
     }
 
-    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
+    if ((error == ENOSPC && action == BLOCKDEV_ON_ERROR_ENOSPC)
-            || action == BLOCK_ERR_STOP_ANY) {
+            || action == BLOCKDEV_ON_ERROR_STOP) {
         req->next = s->rq;
         s->rq = req;
         bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_STOP, is_read);

qapi-schema.json

@@ -1087,6 +1087,29 @@
 ##
 { 'command': 'query-pci', 'returns': ['PciInfo'] }
 
+##
+# @BlockdevOnError:
+#
+# An enumeration of possible behaviors for errors on I/O operations.
+# The exact meaning depends on whether the I/O was initiated by a guest
+# or by a block job
+#
+# @report: for guest operations, report the error to the guest;
+#          for jobs, cancel the job
+#
+# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
+#          or BLOCK_JOB_ERROR)
+#
+# @enospc: same as @stop on ENOSPC, same as @report otherwise.
+#
+# @stop: for guest operations, stop the virtual machine;
+#        for jobs, pause the job
+#
+# Since: 1.3
+##
+{ 'enum': 'BlockdevOnError',
+  'data': ['report', 'ignore', 'enospc', 'stop'] }
+
 ##
 # @BlockJobInfo:
 #