Commit Graph

9 Commits

Author SHA1 Message Date
Stafford Horne
f4d1414a93 target/openrisc: Support non-busy idle state using PMR SPR
The OpenRISC architecture has the Power Management Register (PMR)
special purpose register to manage cpu power states.  The interesting
modes are:

 * Doze Mode (DME) - Stop cpu except timer & pic - wake on interrupt
 * Sleep Mode (SME) - Stop cpu and all units - wake on interrupt
 * Suspend Model (SUME) - Stop cpu and all units - wake on reset

The linux kernel will set DME when idle.

This patch implements the PMR SPR and halts the qemu cpu when there is a
change to DME or SME.  This means that openrisc qemu in no longer peggs
a host cpu at 100%.

In order for this to work we need to kick the CPU when timers are
expired.  Update the cpu timer to kick the cpu upon each timer event.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-05-04 09:39:14 +09:00
Tim 'mithro' Ansell
3fee028d1e target/openrisc: Implement EPH bit
Exception Prefix High (EPH) control bit of the Supervision Register
(SR).

The significant bits (31-12) of the vector offset address for each
exception depend on the setting of the Supervision Register (SR)'s EPH
bit and the Exception Vector Base Address Register (EVBAR).

If SR[EPH] is set, the vector offset is logically ORed with the offset
0xF0000000.

This means if EPH is;
 * 0 - Exceptions vectors start at EVBAR
 * 1 - Exception vectors start at EVBAR | 0xF0000000

Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-04-21 23:56:00 +09:00
Tim 'mithro' Ansell
356a2db3c6 target/openrisc: Implement EVBAR register
Exception Vector Base Address Register (EVBAR) - This optional register
can be used to apply an offset to the exception vector addresses.

The significant bits (31-12) of the vector offset address for each
exception depend on the setting of the Supervision Register (SR)'s EPH
bit and the Exception Vector Base Address Register (EVBAR).

Its presence is indicated by the EVBARP bit in the CPU Configuration
Register (CPUCFGR).

Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-04-21 23:55:48 +09:00
Richard Henderson
a01deb36a6 target/openrisc: Tidy handling of delayed branches
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14 08:15:00 +11:00
Richard Henderson
84775c43f3 target/openrisc: Keep SR_F in a separate variable
This avoids having to keep merging and extracting the flag from SR.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14 08:14:59 +11:00
Richard Henderson
930c3d0074 target/openrisc: Implement lwa, swa
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14 08:14:59 +11:00
Stafford Horne
c56e3b8670 target/openrisc: Fix exception handling status registers
I am working on testing instruction emulation patches for the linux
kernel. During testing I found these 2 issues:

 - sets DSX (delay slot exception) but never clears it
 - EEAR for illegal insns should point to the bad exception (as per
   openrisc spec) but its not

This patch fixes these two issues by clearing the DSX flag when not in a
delay slot and by setting EEAR to exception PC when handling illegal
instruction exceptions.

After this patch the openrisc kernel with latest patches boots great on
qemu and instruction emulation works.

Cc: qemu-trivial@nongnu.org
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Message-Id: <20170113220028.29687-1-shorne@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14 08:14:59 +11:00
Alex Bennée
d10eb08f5d cputlb: drop flush_global flag from tlb_flush
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:37 +00:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00