*plow (lower 64 bits of the dividend) is passed into divs128() as
a signed 64-bit integer. When building an __int128_t from it, it
must be zero-extended, instead of sign-extended.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <20210910112624.72748-3-luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Each Nubus slot has an IRQ line that can be used to request service from the
CPU. Connect the IRQs to the Nubus bridge so that they can be wired up using qdev
gpios accordingly, and introduce a new nubus_set_irq() function that can be used
by Nubus devices to control the slot IRQ.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210924073808.1041-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since nubus-bridge is a container for NubusBus then it should be embedded
directly within the bridge device using qbus_create_inplace().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that Nubus has its own address space rather than mapping directly into the
system bus, move the Nubus reference from MacNubusBridge to NubusBridge.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This better reflects that the mac-nubus-bridge device is derived from the
nubus-bridge device, and that the structure represents the state of the bridge
device and not the Nubus itself. Also update the comment in the file header to
reflect that mac-nubus-bridge is specific to the Macintosh.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is to allow the Nubus bridge to store its own additional state. Also update
the comment in the file header to reflect that nubus-bridge is not specific to
the Macintosh.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to "Designing Cards and Drivers for the Macintosh Family" the Nubus
has its own 32-bit address space based upon physical slot addressing.
Move Nubus to its own 32-bit address space and then use memory region aliases
to map available slot and super slot ranges into the q800 system address
space via the Macintosh Nubus bridge.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The declaration ROM is located at the top-most address of the standard slot
space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since there is no need to generate a dummy declaration ROM, remove both
nubus_register_rom() and nubus_register_format_block(). These will shortly be
replaced with a mechanism to optionally load a declaration ROM from disk to
allow real images to be used within QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert nubus_device_realize() to use a bitmap to manage available slots to allow
for future Nubus devices to be plugged into arbitrary slots from the command line
using a new qdev "slot" parameter for nubus devices.
Update mac_nubus_bridge_init() to only allow slots 0x9 to 0xe on Macintosh machines
as documented in "Designing Cards and Drivers for the Macintosh Family".
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210924073808.1041-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to "Designing Cards and Drivers for the Macintosh Family" each physical
nubus slot can access 2 separate address ranges: a super slot memory region which
is 256MB and a standard slot memory region which is 16MB.
Currently a Nubus device uses the physical slot number to determine whether it is
using a standard slot memory region or a super slot memory region rather than
exposing both memory regions for use as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is in preparation for creating a qdev property of the same name.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The PC_ROM_* definitions are only used by the PC machine,
and are irrelevant to the other architectures / machines.
Reduce their scope by moving them to hw/i386/pc.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210917185949.2244956-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix is added to check for reserved value in select field for
namespace attachment
CC: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
While we may have had some thought of allowing system-mode
to return from this hook, we have no guests that require this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- ePMP CSR address updates
- Convert internal interrupts to use QEMU GPIO lines
- SiFive PWM support
- Support for RISC-V ACLINT
- SiFive PDMA fixes
- Update to u-boot instructions for sifive_u
- mstatus.SD bug fix for hypervisor extensions
- OpenTitan fix for USB dev address
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmFJgSoACgkQIeENKd+X
cFQTOwf8DC7rBqOWQS3v/r+H2hlfDqW+4G3pPPBcoyCEiqO+cL26ox+EmTHDbieh
+0yWyp7L6SU/zcJ86oBAFNGH46ltXuUKOYWhkfA1QwlGzAwjZ82hnZ3jJqXf1jin
Wq0ElzKk6rvcRkHTVhdjkGvoxskaXPQ/kFzyTHrxMDlkmHO3L4IaYe0xsamRI11D
E7UJC97YmpSAsCNUc5irpkeLyiFobyR8TEL3nBEPK/6Xj0ojRT4zoGe1EotC7+sN
zL8a9ZuU0bL3rQH8Ai7wnXBP8D2PQa0tZQV6wne/BzeEUSpKrC/rGW73vQCz0Pps
U8VNkIlbAqD1s6aXlqE24H535x10Mw==
=WYF5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20210921' into staging
Second RISC-V PR for QEMU 6.2
- ePMP CSR address updates
- Convert internal interrupts to use QEMU GPIO lines
- SiFive PWM support
- Support for RISC-V ACLINT
- SiFive PDMA fixes
- Update to u-boot instructions for sifive_u
- mstatus.SD bug fix for hypervisor extensions
- OpenTitan fix for USB dev address
# gpg: Signature made Mon 20 Sep 2021 11:52:26 PM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair23/tags/pull-riscv-to-apply-20210921: (21 commits)
hw/riscv: opentitan: Correct the USB Dev address
target/riscv: csr: Rename HCOUNTEREN_CY and friends
target/riscv: Backup/restore mstatus.SD bit when virtual register swapped
docs/system/riscv: sifive_u: Update U-Boot instructions
hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transfer
hw/dma: sifive_pdma: allow non-multiple transaction size transactions
hw/dma: sifive_pdma: claim bit must be set before DMA transactions
hw/dma: sifive_pdma: reset Next* registers when Control.claim is set
hw/riscv: virt: Add optional ACLINT support to virt machine
hw/riscv: virt: Re-factor FDT generation
hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINT
hw/intc: Rename sifive_clint sources to riscv_aclint sources
sifive_u: Connect the SiFive PWM device
hw/timer: Add SiFive PWM support
hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO lines
hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO lines
hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO lines
hw/intc: sifive_clint: Use RISC-V CPU GPIO lines
target/riscv: Expose interrupt pending bits as GPIO lines
target/riscv: Fix satp write
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken
up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and
pselect() is used to atomically unblock the signal and begin sleeping.
The signal is sent unconditionally so there's no need to worry about
races between actually sleeping and the "we think we're sleeping"
state. It may lead to an extra wakeup but that's better than missing
it entirely.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210916155404.86958-6-agraf@csgraf.de
[agraf: Remove unused 'set' variable, always advance PC on WFX trap,
support vm stop / continue operations and cntv offsets]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We extend virt machine to emulate ACLINT devices only when "aclint=on"
parameter is passed along with machine name in QEMU command-line.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-5-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V ACLINT is more modular and backward compatible with
original SiFive CLINT so instead of duplicating the original
SiFive CLINT implementation we upgrade the current SiFive CLINT
implementation to RISC-V ACLINT implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-3-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT
implementation so let's first rename the sources.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-2-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is the initial commit of the SiFive PWM timer. This is used by
guest software as a timer and is included in the SiFive FU540 SoC.
Signed-off-by: Justin Restivo <jrestivo@draper.com>
Signed-off-by: Alexandra Clifford <aclifford@draper.com>
Signed-off-by: Amanda Strnad <astrnad@draper.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 9f70a210acbfaf0e1ea6ad311ab892ac69134d8b.1631159656.git.alistair.francis@wdc.com
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the timer MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 84d5b1d5783d2e79eee69a2f7ac480cc0c070db3.1630301632.git.alistair.francis@wdc.com
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the external MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the external MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 0a76946981852f5bd15f0c37ab35b253371027a8.1630301632.git.alistair.francis@wdc.com
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the timer and soft MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-id: 946e1ef5e268b24084c7ddad84c146de62a56736.1630301632.git.alistair.francis@wdc.com
With Apple Silicon available to the masses, it's a good time to add support
for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs
working, including save/restore.
Known limitations:
- WFI handling is missing (follows in later patch)
- No watchpoint/breakpoint support
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-5-agraf@csgraf.de
[PMM: added missing #include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need to install a migration helper for the ARM hvf backend.
Let's introduce an arch callback for the overall hvf init chain to
do so.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-4-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When you run QEMU with an Aspeed machine and a single serial device
using stdio like this:
qemu -machine ast2600-evb -drive ... -serial stdio
The guest OS can read and write to the UART5 registers at 0x1E784000 and
it will receive from stdin and write to stdout. The Aspeed SoC's have a
lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on
the board design, may be using any of them as the serial console. (See
"stdout-path" in a DTS to check which one is chosen).
Most boards, including all of those currently defined in
hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds
some flexibility for different boards without requiring users to change
their command-line invocation of QEMU.
I tested this doesn't break existing code by booting an AST2500 OpenBMC
image and an AST2600 OpenBMC image, each using UART5 as the console.
Then I tested switching the default to UART1 and booting an AST2600
OpenBMC image that uses UART1, and that worked too.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210901153615.2746885-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the latest revision of the ASPEED 2600 SoC. As there is no
need to model multiple revisions of the same SoC for the moment,
update the SCU AST2600 to model the A3 revision instead of the A1 and
adapt the AST2600 SoC and machines.
Reset values are taken from v8 of the datasheet.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: - Introduced an Aspeed "ast2600-a3" SoC class
- Commit log update ]
Message-Id: <20210629142336.750058-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
While some of the critical fields remain the same, there is variation in
the definition of the control register across the SoC generations.
Reserved regions are adjusted, while in other cases the mutability or
behaviour of fields change.
Introduce a callback to sanitize the value on writes to ensure model
behaviour reflects the hardware.
Fixes: 854123bf8d ("wdt: Add Aspeed watchdog device model")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210709053107.1829304-2-andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
.bdrv_co_block_status() implementations are free to return a *pnum that
exceeds @bytes, because bdrv_co_block_status() in block/io.c will clamp
*pnum as necessary.
On the other hand, if drivers' implementations return values for *pnum
that are as large as possible, our recently introduced block-status
cache will become more effective.
So, make a note in block_int.h that @bytes is no upper limit for *pnum.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210812084148.14458-4-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
As we have attempted before
(https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg06451.html,
"file-posix: Cache lseek result for data regions";
https://lists.nongnu.org/archive/html/qemu-block/2021-02/msg00934.html,
"file-posix: Cache next hole"), this patch seeks to reduce the number of
SEEK_DATA/HOLE operations the file-posix driver has to perform. The
main difference is that this time it is implemented as part of the
general block layer code.
The problem we face is that on some filesystems or in some
circumstances, SEEK_DATA/HOLE is unreasonably slow. Given the
implementation is outside of qemu, there is little we can do about its
performance.
We have already introduced the want_zero parameter to
bdrv_co_block_status() to reduce the number of SEEK_DATA/HOLE calls
unless we really want zero information; but sometimes we do want that
information, because for files that consist largely of zero areas,
special-casing those areas can give large performance boosts. So the
real problem is with files that consist largely of data, so that
inquiring the block status does not gain us much performance, but where
such an inquiry itself takes a lot of time.
To address this, we want to cache data regions. Most of the time, when
bad performance is reported, it is in places where the image is iterated
over from start to end (qemu-img convert or the mirror job), so a simple
yet effective solution is to cache only the current data region.
(Note that only caching data regions but not zero regions means that
returning false information from the cache is not catastrophic: Treating
zeroes as data is fine. While we try to invalidate the cache on zero
writes and discards, such incongruences may still occur when there are
other processes writing to the image.)
We only use the cache for nodes without children (i.e. protocol nodes),
because that is where the problem is: Drivers that rely on block-status
implementations outside of qemu (e.g. SEEK_DATA/HOLE).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/307
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210812084148.14458-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[hreitz: Added `local_file == bs` assertion, as suggested by Vladimir]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a comment above the BDS definition stating care must be taken
to consider handling newly added fields in bdrv_append().
Actually, this comment should have said "bdrv_swap()" as of 4ddc07cac
(nine years ago), and in any case, bdrv_swap() was dropped in
8e419aefa (six years ago). So no such care is necessary anymore.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210812084148.14458-2-hreitz@redhat.com>
qdev_init_gpio_out() states it "creates an array of anonymous
output GPIO lines" but doesn't document how this array is
released. Add a note that it is automatically free'd in qdev
instance_finalize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210819142731.2827912-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead of immediately drawing and submitting, queue and wait
for the draw signal if the dmabuf submitted is a blob.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-5-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create sync objects and fences only for dmabufs that are blobs. Once a
fence is created (after glFlush) and is signalled,
graphic_hw_gl_flushed() will be called and virtio-gpu cmd processing
will be resumed.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These egl helpers would be used for creating and waiting on
a sync object.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-3-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the texture release mechanism is same for both gtk-egl
and gtk-glarea, move the helper from gtk-egl to common gtk
code so that it can be shared by both gtk backends.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-2-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All targets call TCGCPUOps::cpu_exec_interrupt() from sysemu code.
Move its declaration to restrict it to system emulation.
Extend the code guarded.
Restrict the static inlined need_replay_interrupt() method to
avoid a "defined but not used" warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-24-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_interrupt() is sysemu specific. However due to some X86
specific hack, it is also used in user-mode emulation, which
is why it couldn't be restricted to CONFIG_SOFTMMU (see the
comment around added in commit 78271684719: "cpu: tcg_ops:
move to tcg-cpu-ops.h, keep a pointer in CPUClass").
Keep the hack but rename the handler as fake_user_interrupt()
and restrict do_interrupt() to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 1c2adb958f ("tcg: Initialize cpu_env generically"),
these tcg_global_reg_new_ macros are not used anywhere.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210816143507.11200-1-bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
translate_insn() implementations fetch instruction bytes piecemeal,
which can cause qemu-user to generate inconsistent translations if
another thread modifies them concurrently [1].
Fix by making pages containing translated instruction non-writable
right before loading instruction bytes from them.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2021-08/msg00644.html
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210805204835.158918-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"chr_option_parsed" is only implemented by the "mux" chardev, we can
specialize the code there to avoid the needless generic class method.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
* mark MPS2/MPS3 board-internal i2c buses as 'full' so that command
line user-created devices are not plugged into them
* Take an exception if PSTATE.IL is set
* Support an emulated ITS in the virt board
* Add support for kudo-bmc board
* Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
* cadence_uart: Fix clock handling issues that prevented
u-boot from running
-----BEGIN PGP SIGNATURE-----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=7BH/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210913-3' into staging
target-arm queue:
* mark MPS2/MPS3 board-internal i2c buses as 'full' so that command
line user-created devices are not plugged into them
* Take an exception if PSTATE.IL is set
* Support an emulated ITS in the virt board
* Add support for kudo-bmc board
* Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
* cadence_uart: Fix clock handling issues that prevented
u-boot from running
# gpg: Signature made Mon 13 Sep 2021 21:04:52 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210913-3: (23 commits)
hw/arm/mps2.c: Mark internal-only I2C buses as 'full'
hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full'
hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
qdev: Support marking individual buses as 'full'
target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn
target/arm: Take an exception if PSTATE.IL is set
tests/data/acpi/virt: Update IORT files for ITS
hw/arm/virt: add ITS support in virt GIC
tests/data/acpi/virt: Add IORT files for ITS
hw/intc: GICv3 redistributor ITS processing
hw/intc: GICv3 ITS Feature enablement
hw/intc: GICv3 ITS Command processing
hw/intc: GICv3 ITS command queue framework
hw/intc: GICv3 ITS register definitions added
hw/intc: GICv3 ITS initial framework
hw/arm: Add support for kudo-bmc board.
hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
hw/char: cadence_uart: Log a guest error when device is unclocked or in reset
hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}()
hw/char: cadence_uart: Convert to memop_with_attrs() ops
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default, QEMU will allow devices to be plugged into a bus up to
the bus class's device count limit. If the user creates a device on
the command line or via the monitor and doesn't explicitly specify
the bus to plug it in, QEMU will plug it into the first non-full bus
that it finds.
This is fine in most cases, but some machines have multiple buses of
a given type, some of which are dedicated to on-board devices and
some of which have an externally exposed connector for user-pluggable
devices. One example is I2C buses.
Provide a new function qbus_mark_full() so that a machine model can
mark this kind of "internal only" bus as 'full' after it has created
all the devices that should be plugged into that bus. The "find a
non-full bus" algorithm will then skip the internal-only bus when
looking for a place to plug in user-created devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-2-peter.maydell@linaro.org
Included creation of ITS as part of virt platform GIC
initialization. This Emulated ITS model now co-exists with kvm
ITS and is enabled in absence of kvm irq kernel support in a
platform.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-9-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implemented lpi processing at redistributor to get lpi config info
from lpi configuration table,determine priority,set pending state in
lpi pending table and forward the lpi to cpuif.Added logic to invoke
redistributor lpi processing with translated LPI which set/clear LPI
from ITS device as part of ITS INT,CLEAR,DISCARD command and
GITS_TRANSLATER processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-7-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added properties to enable ITS feature and define qemu system
address space memory in gicv3 common,setup distributor and
redistributor registers to indicate LPI support.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-6-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added ITS command queue handling for MAPTI,MAPI commands,handled ITS
translation which triggers an LPI via INT command as well as write
to GITS_TRANSLATER register,defined enum to differentiate between ITS
command interrupt trigger and GITS_TRANSLATER based interrupt trigger.
Each of these commands make use of other functionalities implemented to
get device table entry,collection table entry or interrupt translation
table entry required for their processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-5-shashi.mallela@linaro.org
[PMM: use INTERRUPT for ItsCmdType enum name to avoid
conflict with INT type defined by Windows headers]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Defined descriptors for ITS device table,collection table and ITS
command queue entities.Implemented register read/write functions,
extract ITS table parameters and command queue parameters,extended
gicv3 common to capture qemu address space(which host the ITS table
platform memories required for subsequent ITS processing) and
initialize the same in ITS device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-3-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added register definitions relevant to ITS,implemented overall
ITS device framework with stubs for ITS control and translater
regions read/write,extended ITS common to handle mmio init between
existing kvm device and newer qemu device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-2-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Userland targers will otherwise use a poisoned CONFIG_NVMM
Signed-off-by: Reinoud Zandijk <Reinoud@NetBSD.org>
Message-Id: <20210718134650.1191-2-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These will soon be required to enable nubus devices to support interrupts.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210830102447.10806-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also improve the alignment of the shifted constants.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210830102447.10806-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove the mac_via device and wire up both q800 VIA1 and VIA2 directly for the
m68k q800 machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210830102447.10806-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The ADB is accessed using clock and data pins on q800 VIA1 port B and so can be
moved to MOS6522Q800VIA1State.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210830102447.10806-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The PRAM/RTC is accessed using clock and data pins on q800 VIA1 port B and so
can be moved to MOS6522Q800VIA1State.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210830102447.10806-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The PRAM contents are accessed using clock and data pins on q800 VIA1 port B
and so can be moved to MOS6522Q800VIA1State.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210830102447.10806-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now we have removed all the uses of gen_io_end() from target frontends,
the only callsite is inside gen_tb_start(). Inline the code there,
and remove the reference to it from the documentation.
While we are inlining the code, switch it to use tcg_constant_i32()
so we don't have to manually create and destroy a TCG temporary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210724134902.7785-3-peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* Storage key related fixes
* Test SIGILL and SIGSEGV handling in usermode emulation
* Fix SETPREFIX instruction
* Replace PAGE_SIZE, PAGE_SHIFT and PAGE_MASK to fix Alpine compilation
* Add more feature to gen16 default model
-----BEGIN PGP SIGNATURE-----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=dh2k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/s390x-pull-request-2021-09-07' into staging
* Some CSS related fixes
* Storage key related fixes
* Test SIGILL and SIGSEGV handling in usermode emulation
* Fix SETPREFIX instruction
* Replace PAGE_SIZE, PAGE_SHIFT and PAGE_MASK to fix Alpine compilation
* Add more feature to gen16 default model
# gpg: Signature made Tue 07 Sep 2021 14:07:38 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/s390x-pull-request-2021-09-07:
s390x/cpumodel: Add more feature to gen16 default model
s390x: Replace PAGE_SIZE, PAGE_SHIFT and PAGE_MASK
hw/s390x/s390-skeys: lazy storage key enablement under TCG
hw/s390x/s390-skeys: rename skeys_enabled to skeys_are_enabled
hw/s390x/s390-skeys: check if an address is valid before dumping the key
hw/s390x/s390-skeys: use memory mapping to detect which storage keys to dump
hw/s390x/s390-skeys: use memory mapping to detect which storage keys to migrate
s390x/mmu_helper: avoid setting the storage key if nothing changed
s390x/mmu_helper: move address validation into mmu_translate*()
s390x/mmu_helper: fixup mmu_translate() documentation
s390x/mmu_helper: no need to pass access type to mmu_translate_asce()
s390x/tcg: check for addressing exceptions for RRBE, SSKE and ISKE
s390x/tcg: convert real to absolute address for RRBE, SSKE and ISKE
s390x/tcg: fix ignoring bit 63 when setting the storage key in SSKE
s390x/tcg: wrap address for RRBE
s390x/ioinst: Fix wrong MSCH alignment check on little endian
s390x/tcg: fix and optimize SPX (SET PREFIX)
tests/tcg/s390x: Test SIGILL and SIGSEGV handling
css: fix actl handling for unit exceptions
vfio-ccw: forward halt/clear errors
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently qemu_vfio_dma_map() displays errors on stderr.
When using management interface, this information is simply
lost. Pass qemu_vfio_dma_map() an Error** handle so it can
propagate the error to callers.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The PAGE_SIZE macro is causing trouble on Alpine Linux since it
clashes with a macro from a system header there. We already have
the TARGET_PAGE_SIZE, TARGET_PAGE_MASK and TARGET_PAGE_BITS macros
in QEMU anyway, so let's simply replace the PAGE_SIZE, PAGE_MASK
and PAGE_SHIFT macro with their TARGET_* counterparts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/572
Message-Id: <20210901125800.611183-1-thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's enable storage keys lazily under TCG, just as we do under KVM.
Only fairly old Linux versions actually make use of storage keys, so it
can be kind of wasteful to allocate quite some memory and track
changes and references if nobody cares.
We have to make sure to flush the TLB when enabling storage keys after
the VM was already running: otherwise it might happen that we don't
catch references or modifications afterwards.
Add proper documentation to all callbacks.
The kvm-unit-tests skey tests keeps on working with this change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-14-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
... and make it return a bool instead.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-13-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a subchannel becomes pending with unit exception, start
pending (and for that matter, halt or clear pending) are not
removed in the actl. Device active and subchannel active,
however, are (due to the subchannel becoming status pending
with primary respectively secondary status).
The other conditions in the actl are only cleared when the
guest executes tsch on the subchannel.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20210705163952.736020-3-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmEz5lIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp0WMIAL/keMtzBfVNaDAER/gaaklluJ7XCFYJgKfX
Pg173ZAWd+KNryiKDEn9SVIDzjKmllvQu0P18St92hHCCRhzIqlGwZ6IpB1XgVLh
OmcRlccepb+84FNiCD6RIxE+iLQ3eTrFUrpF6CIHZlD+TUTm7u1gtZFidV3v5EZp
BaT+BFxFZgejfKnxEYjnxOgAYmyXI18fFtW/GX6VgVTiy10XRoNqNZ6DwO2sZBNu
2NI2RMVMNopwQyn/1vj3KtBvhaqPdhrPV0qGzi9isU7t5Z2JE/n14O9WHcA4K2ed
3HktAGlv+glSbNldfc+9jIIHlkwHAi/T4PAGYE3HbCP0atONl/M=
=DN6u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: fixes, cleanups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sat 04 Sep 2021 22:34:10 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (35 commits)
vhost-vdpa: remove the unncessary queue_index assignment
vhost-vdpa: fix the wrong assertion in vhost_vdpa_init()
vhost-vdpa: tweak the error label in vhost_vdpa_add()
vhost-vdpa: fix leaking of vhost_net in vhost_vdpa_add()
vhost-vdpa: don't cleanup twice in vhost_vdpa_add()
vhost-vdpa: remove the unnecessary check in vhost_vdpa_add()
vhost_net: do not assume nvqs is always 2
vhost: use unsigned int for nvqs
vhost_net: remove the meaningless assignment in vhost_net_start_one()
vhost-vdpa: correctly return err in vhost_vdpa_set_backend_cap()
vhost-vdpa: remove unused variable "acked_features"
tests/vhost-user-bridge.c: Fix typo in help message
tests/vhost-user-bridge.c: Sanity check socket path length
hw/virtio: Add flatview update in vhost_user_cleanup()
hw/virtio: Remove NULL check in virtio_free_region_cache()
hw/virtio: Document virtio_queue_packed_empty_rcu is called within RCU
MAINTAINERS: Added myself as a reviewer for acpi/smbios subsystem
hw/acpi: use existing references to pci device struct within functions
hw/pci: remove all references to find_i440fx function
hw/i386/acpi-build: Get NUMA information from struct NumaState
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch switches to initialize dev.nvqs from the VhostNetOptions
instead of assuming it was 2. This is useful for implementing control
virtqueue support which will be a single vhost_net structure with a
single cvq.
Note that nvqs is still set to 2 for all users and this patch does not
change functionality.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Switch to use unsigned int for nvqs since it's not expected to be
negative.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit c0e427d6eb ("hw/acpi/ich9: Enable ACPI PCI hot-plug") removed all
uses of find_i440fx() function. This has been replaced by the more generic call
acpi_get_i386_pci_host() which maybe able to find the root bus both for i440fx
machine type as well as for the q35 machine type. There seems to be no more any
need to maintain a i440fx specific version of the api call. Remove it.
Tested by building from a clean tree successfully.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210825031949.919376-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commits aa57020774 ("numa: move numa global variable
nb_numa_nodes into MachineState") and 7e721e7b10 ("numa: move
numa global variable numa_info into MachineState"), we can get
NUMA information completely from MachineState::numa_state.
Remove PCMachineState::numa_nodes and PCMachineState::node_mem,
since they are just copied from MachineState::numa_state.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20210823011254.28506-1-jingqi.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce a new method for the virtio-bus for the transport
to report whether or not the IOMMU is enabled for the device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210804034803.1644-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The macro never worked and never will, because the
AcpiGedX86State type never existed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210805193431.307761-2-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just a small refactor patch.
vhost_set_backend_type() gets called only in vhost.c, so we can move the
function there and make it static. We can then extern the visibility of
kernel_ops, to match the other VhostOps in vhost-backend.h.
The VhostOps constants now make more sense in vhost.h
Suggested-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Tiberiu Georgescu <tiberiu.georgescu@nutanix.com>
Message-Id: <20210809134015.67941-1-tiberiu.georgescu@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being
used for both q35 and i440fx machine types, it is better that we defined this
property string at a single place within a header file like other PIIX4
properties. We can then use this single definition at all the places that needs
it instead of duplicating the string everywhere. While at it, this change also
adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses
this definition at all places that were formally using the string value.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210816083214.105740-1-ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the introduction of the batch hinting, meaningless batches can be
created with no IOTLB updates if the memory region was skipped by
vhost_vdpa_listener_skipped_section. This is the case of host notifiers
memory regions, device un/realize, and others. This causes the vdpa
device to receive dma mapping settings with no changes, a possibly
expensive operation for nothing.
To avoid that, VHOST_IOTLB_BATCH_BEGIN hint is delayed until we have a
meaningful (not skipped section) mapping or unmapping operation, and
VHOST_IOTLB_BATCH_END is not written unless at least one of _UPDATE /
_INVALIDATE has been issued.
v3:
* Use a bool instead of a counter avoiding potential number wrapping
* Fix bad check on _commit
* Move VHOST_BACKEND_F_IOTLB_BATCH check to
vhost_vdpa_iotlb_batch_begin_once
v2 (from RFC):
* Rename misleading name
* Abstract start batching function for listener_add/del
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20210812140933.226288-1-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmEwqF4ACgkQ+9DbCVqe
KkTCcAf/fCHK1hhXJIaxpFyMGvCkhYzUgKlpL4b05ofXFyQJ4JWp+0OadQzBcVIN
PwsVVsXik/5ibKvQiud8wt3/kbr9gj5RZdwVITZMEpod6hy9Nt5oaUhxEZpiVs3f
XZG17zaK8huwTwU6EtHWOnvIWMCuvBXpw8cM/6jF6pEiq162VJbiRo9L/aQ+n0Io
TZTy9YqEbrZUTj+XrvgPV0TewjM6T/zTujXFJtyCzYJ3P3kx9z5a3/KzfyJI9qkk
TYw0MX9MY8J5/sXcP6OjOqXqppsRe+G5Uaz0BoW9SvOmR/0nNGy/N8mVCZTD6mqs
zMsWw5RyIZsZCyWEYj4TYWEORv5Kiw==
=CBs1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-020921-1' into staging
Testing and plugin updates:
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
# gpg: Signature made Thu 02 Sep 2021 11:33:02 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.2-020921-1: (22 commits)
docs/devel: be consistent about example plugin names
docs/deprecated: deprecate passing plugin args through `arg=`
tests/plugins/syscalls: adhere to new arg-passing scheme
tests/plugins/mem: introduce "track" arg and make args not positional
tests/plugins/insn: made arg inline not positional and parse it as bool
tests/plugins/bb: adapt to the new arg passing scheme
docs/tcg-plugins: new passing parameters scheme for cache docs
plugins/howvec: adapting to the new argument passing scheme
plugins/hwprofile: adapt to the new plugin arguments scheme
plugins/lockstep: make socket path not positional & parse bool arg
plugins/hotblocks: Added correct boolean argument parsing
plugins/hotpages: introduce sortby arg and parsed bool args correctly
plugins/api: added a boolean parsing plugin api
plugins: allow plugin arguments to be passed directly
docs/devel/tcg-plugins: added cores arg to cache plugin
plugins: sort exported symbol list
plugins/cache: supported multicore cache modelling
plugins: do not limit exported symbols if modules are active
gitlab-ci: Fix ..._RUNNER_AVAILABLE variables and document them
gitlab-ci: Remove superfluous "dnf install" statement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
-----BEGIN PGP SIGNATURE-----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=0tJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz/tags/pull-block-2021-09-01' into staging
Block patches:
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
# gpg: Signature made Wed 01 Sep 2021 16:01:54 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz/tags/pull-block-2021-09-01: (56 commits)
block/file-win32: add reopen handlers
block/export/fuse.c: fix fuse-lseek on uclibc or musl
block/block-copy: block_copy_state_new(): drop extra arguments
iotests/image-fleecing: add test-case for copy-before-write filter
iotests/image-fleecing: prepare for adding new test-case
iotests/image-fleecing: rename tgt_node
iotests/image-fleecing: proper source device
iotests.py: hmp_qemu_io: support qdev
iotests: move 222 to tests/image-fleecing
iotests/222: constantly use single quotes for strings
iotests/222: fix pylint and mypy complains
python:QEMUMachine: template typing for self returning methods
python/qemu/machine: QEMUMachine: improve qmp() method
python/qemu/machine.py: refactor _qemu_args()
qapi: publish copy-before-write filter
block/copy-before-write: make public block driver
block/block-copy: make setting progress optional
block/copy-before-write: initialize block-copy bitmap
block/copy-before-write: cbw_init(): use options
block/copy-before-write: bdrv_cbw_append(): drop unused compress arg
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This call will help boolean argument parsing since arguments are now
passed to plugins as a name and value.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-3-ma.mandourr@gmail.com>
[AJB: add to symbols]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The only caller pass copy_range and compress both false. Let's just
drop these arguments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-35-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The main consumer of cluster-size is block-copy. Let's calculate it
here instead of passing through backup-top.
We are going to publish copy-before-write filter soon, so it will be
created through options. But we don't want for now to make explicit
option for cluster-size, let's continue to calculate it automatically.
So, now is the time to get rid of cluster_size argument for
bdrv_cbw_append().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-10-vsementsov@virtuozzo.com>
[hreitz: Add qemu/error-report.h include to block/block-copy.c]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll need a possibility to set compress and use_copy_range options
after initialization of the state. So make corresponding part of
block_copy_state_new() separate and public.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-8-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want to simplify initialization interface of copy-before-write
filter as we are going to make it public. So, let's detect fleecing
scheme exactly in block-copy code, to not pass this information through
extra levels.
Why not just set BDRV_REQ_SERIALISING unconditionally: because we are
going to implement new more efficient fleecing scheme which will not
rely on backing feature.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824083856.17408-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add field, so property can declare support for setting the property
when device is realized. To be used in the following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to change bs inside blk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to transactionally replace bs inside BdrvChild.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all the code that sets it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210812093356.1946-26-peter.maydell@linaro.org
The stellaris-gptm timer currently uses system_clock_scale for one of
its timer modes where the timer runs at the CPU clock rate. Make it
use a Clock input instead.
We don't try to make the timer handle changes in the clock frequency
while the downcounter is running. This is not a change in behaviour
from the previous system_clock_scale implementation -- we will pick
up the new frequency only when the downcounter hits zero. Handling
dynamic clock changes when the counter is running would require state
that the current gptm implementation doesn't have.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20210812093356.1946-25-peter.maydell@linaro.org
The implementation of the Stellaris general purpose timer module
device stellaris-gptm is currently in the same source file as the
board model. Split it out into its own source file in hw/timer.
Apart from the new file comment headers and the Kconfig and
meson.build changes, this is just code movement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20210812093356.1946-24-peter.maydell@linaro.org
Luis Pires
Mark Cave-Ayland
Philippe Mathieu-Daudé
Richard Henderson
Naveen Nagar
Peter Maydell
Peter Collingbourne
Anup Patel
Alistair Francis
Alexander Graf
Peter Delevoryas
Joel Stanley
Andrew Jeffery
Hanna Reitz
Vivek Kasireddy
Philippe Mathieu-Daudé
Bin Meng
Ilya Leoshkevich
Marc-André Lureau
Shashi Mallela
Reinoud Zandijk
Thomas Huth
David Hildenbrand
Cornelia Huck
Jason Wang
Ani Sinha
Jingqi Liu
Eduardo Habkost
Tiberiu Georgescu
Eugenio Pérez
Mahmoud Mandour
Vladimir Sementsov-Ogievskiy