When checking whether a stream ID is in range of the stream table, we
have so far been only checking it against our implementation limit
(SMMU_IDR1_SIDSIZE). However, the guest can program the
STRTAB_BASE_CFG.LOG2SIZE field to a size that is smaller than this
limit.
Check the stream ID against this limit as well to match the hardware
behavior of raising C_BAD_STREAMID events in case the limit is exceeded.
Also, ensure that we do not go one entry beyond the end of the table by
checking that its index is strictly smaller than the table size.
ref. ARM IHI 0070C, section 6.3.24.
Signed-off-by: Simon Veith <sveith@amazon.de>
Acked-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1576509312-13083-4-git-send-email-sveith@amazon.de
Cc: Eric Auger <eric.auger@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are two issues with the current value of SMMU_BASE_ADDR_MASK:
- At the lower end, we are clearing bits [4:0]. Per the SMMUv3 spec,
we should also be treating bit 5 as zero in the base address.
- At the upper end, we are clearing bits [63:48]. Per the SMMUv3 spec,
only bits [63:52] must be explicitly treated as zero.
Update the SMMU_BASE_ADDR_MASK value to mask out bits [63:52] and [5:0].
ref. ARM IHI 0070C, section 6.3.23.
Signed-off-by: Simon Veith <sveith@amazon.de>
Acked-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1576509312-13083-3-git-send-email-sveith@amazon.de
Cc: Eric Auger <eric.auger@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the SMMU_STRTAB_BASE register, the stream table base address only
occupies bits [51:6]. Other bits, such as RA (bit [62]), must be masked
out to obtain the base address.
The branch for 2-level stream tables correctly applies this mask by way
of SMMU_BASE_ADDR_MASK, but the one for linear stream tables does not.
Apply the missing mask in that case as well so that the correct stream
base address is used by guests which configure a linear stream table.
Linux guests are unaffected by this change because they choose a 2-level
stream table layout for the QEMU SMMUv3, based on the size of its stream
ID space.
ref. ARM IHI 0070C, section 6.3.23.
Signed-off-by: Simon Veith <sveith@amazon.de>
Acked-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1576509312-13083-2-git-send-email-sveith@amazon.de
Cc: Eric Auger <eric.auger@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Acked-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This matches the configuration set by u-boot on the AST2600.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 080ca1267a09381c43cf3c50d434fb6c186f2b6e.1576215453.git-series.andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ASPEED AST2600 clocks the generic timer at the rate of HPLL. On
recent firmwares this is at 1125MHz, which is considerably quicker than
the assumed 62.5MHz of the current generic timer implementation. The
delta between the value as read from CNTFRQ and the true rate of the
underlying QEMUTimer leads to sticky behaviour in AST2600 guests.
Add a feature-gated property exposing CNTFRQ for ARM CPUs providing the
generic timer. This allows platforms to configure CNTFRQ (and the
associated QEMUTimer) to the appropriate frequency prior to starting the
guest.
As the platform can now determine the rate of CNTFRQ we're exposed to
limitations of QEMUTimer that didn't previously materialise: In the
course of emulation we need to arbitrarily and accurately convert
between guest ticks and time, but we're constrained by QEMUTimer's use
of an integer scaling factor. The effect is QEMUTimer cannot exactly
capture the period of frequencies that do not cleanly divide
NANOSECONDS_PER_SECOND for scaling ticks to time. As such, provide an
equally inaccurate scaling factor for scaling time to ticks so at least
a self-consistent inverse relationship holds.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: a22db9325f96e39f76e3c2baddcb712149f46bf2.1576215453.git-series.andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prepare for SoCs such as the ASPEED AST2600 whose firmware configures
CNTFRQ to values significantly larger than the static 62.5MHz value
currently derived from GTIMER_SCALE. As the OS potentially derives its
timer periods from the CNTFRQ value the lack of support for running
QEMUTimers at the appropriate rate leads to sticky behaviour in the
guest.
Substitute the GTIMER_SCALE constant with use of a helper to derive the
period from gt_cntfrq_hz stored in struct ARMCPU. Initially set
gt_cntfrq_hz to the frequency associated with GTIMER_SCALE so current
behaviour is maintained.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 40bd8df043f66e1ccfb3e9482999d099ac72bb2e.1576215453.git-series.andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The corner-case codepath was adjusting nexttick such that overflow
wouldn't occur when timer_mod() scaled the value back up. Remove a use
of GTIMER_SCALE and avoid unnecessary operations by calling
timer_mod_ns() directly.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: f8c680720e3abe55476e6d9cb604ad27fdbeb2e0.1576215453.git-series.andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=sbbP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2019-12-17-v2' into staging
Error reporting patches for 2019-12-17
# gpg: Signature made Wed 18 Dec 2019 07:45:24 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2019-12-17-v2: (35 commits)
nbd: assert that Error** is not NULL in nbd_iter_channel_error
hw/vfio/ap: drop local_err from vfio_ap_realize
backends/cryptodev: drop local_err from cryptodev_backend_complete()
include/qom/object.h: rename Error ** parameter to more common errp
hw/usb: rename Error ** parameter to more common errp
hw/tpm: rename Error ** parameter to more common errp
hw/sd: drop extra whitespace in sdhci_sysbus_realize() header
hw/s390x: rename Error ** parameter to more common errp
monitor/qmp-cmds: rename Error ** parameter to more common errp
qga: rename Error ** parameter to more common errp
hw/i386/amd_iommu: rename Error ** parameter to more common errp
block/snapshot: rename Error ** parameter to more common errp
hw/core/qdev: cleanup Error ** variables
9pfs: make Error **errp const where it is appropriate
ppc: make Error **errp const where it is appropriate
Revert "ppc: well form kvmppc_hint_smt_possible error hint helper"
qdev-monitor: make Error **errp const where it is appropriate
vnc: drop Error pointer indirection in vnc_client_io_error
hmp: drop Error pointer indirection in hmp_handle_error
error: make Error **errp const where it is appropriate
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The node has been removed from the texi file some months ago, so we
should remove it from the menu section, too.
Fixes: 27a296fce9 ("qemu-ga: Convert invocation documentation to rST")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216132941.25729-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reverts commit bbd9e6985f.
In 20a1922032 we allowed reboot-timeout=-1 again, so update the doc
accordingly.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205024821.245435-1-hhan@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This file hasn't seen a real (non-trivial) update since 2008 anymore,
so we can assume that it is pretty much out of date and nobody cares
for it anymore. Let's simply remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20190930171044.25312-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
test_keyval_visit_size() should test for trailing crap after size with
and without suffix. It does test the latter: "sz2=16Gi" has size
"16G" followed by crap "i". It fails to test the former "sz1=16E" is
a syntactically valid size that overflows uint64_t. Replace by
"sz1=0Z".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191125133846.27790-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu_strtoi64() assumes int64_t is long long. This is marked FIXME.
Replace by a QEMU_BUILD_BUG_ON() to avoid surprises.
Same for qemu_strtou64().
Fix a typo in qemu_strtoul()'s contract while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191125133846.27790-2-armbru@redhat.com>
[lv: removed trailing whitespace]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove the definition of QMP_ACCEPT_UNKNOWNS as it is unused since
refactoring 5c678ee8d9
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191119110709.13827-1-yury-kotov@yandex-team.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hw/sd/ssi-sd.c file is orphean, add it to the SD section.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191012065426.10772-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All callers of nbd_iter_channel_error() pass the address of a
local_err variable, and only call this function if an error has
already occurred, using this function to propagate that error.
This is already implied by its name (local_err instead of the classic
errp), but it is worth additionally stressing this by adding an
assertion to make it part of the function contract.
The local_err parameter is not here to return information about
nbd_iter_channel_error failure. Instead it's assumed to be filled when
passed to the function. This is already stressed by its name
(local_err, instead of classic errp). Stress it additionally by
assertion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-22-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No reason for local_err here, use errp directly instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20191205174635.18758-21-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No reason for local_err here, use errp directly instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <20191205174635.18758-20-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191205174635.18758-19-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-18-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20191205174635.18758-17-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191205174635.18758-16-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-14-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-13-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-12-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@Redhat.com>
Message-Id: <20191205174635.18758-11-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename Error ** parameter in check_only_migratable to common errp.
In device_set_realized:
- Move "if (local_err != NULL)" closer to error setters.
- Drop 'Error **local_errp': it doesn't save any LoCs, but it's very
unusual.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-10-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However error_append_security_model_hint and
error_append_socket_sockfd_hint get already filled errp
parameter. They don't change the pointer itself, only change the
internal state of referenced Error object. So we can make it Error
*const * errp, to stress the behavior. It will also help coccinelle
script (in future) to distinguish such cases from common errp usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-Id: <20191205174635.18758-9-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message replaced]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However kvmppc_hint_smt_possible gets already filled
errp parameter. It doesn't change the pointer itself, only change the
internal state of referenced Error object. So we can make it Error
*const * errp, to stress the behavior. It will also help coccinelle
script (in future) to distinguish such cases from common errp usage.
While there, rename the function to
kvmppc_error_append_smt_possible_hint().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20191205174635.18758-8-vsementsov@virtuozzo.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message replaced]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit cdcca22aab.
Commit cdcca22aab is a superseded version of the next commit that
crept in by accident. Revert it, so the final version applies.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However qbus_list_bus and qbus_list_dev get already
filled errp parameter. They don't change the pointer itself, only
change the internal state of referenced Error object. So we can make
it Error *const * errp, to stress the behavior. It will also help
coccinelle script (in future) to distinguish such cases from common
errp usage.
While there, rename the functions to
qbus_error_append_bus_list_hint(), qbus_error_append_dev_list_hint().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-7-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message replaced]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call, or NULL. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-6-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-5-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However these three functions get already filled errp
parameter. They don't change the pointer itself, only change the
internal state of referenced Error object. So we can make it
Error *const * errp, to stress the behavior. It will also help
coccinelle script (in future) to distinguish such cases from common
errp usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-4-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Variable int err in inner scope shadows Error *err in outer scope.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191205174635.18758-3-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191204093625.14836-19-armbru@redhat.com>
Local Error * variables are conventionally named @err or @local_err,
and Error ** parameters @errp. Naming local variables like parameters
is confusing. Clean that up.
Naming parameters like local variables is also confusing. Left for
another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204093625.14836-17-armbru@redhat.com>
memory_device_get_free_addr() dereferences @errp when
memory_device_check_addable() fails. That's wrong; see the big
comment in error.h. Introduced in commit 1b6d6af21b "pc-dimm: factor
out capacity and slot checks into MemoryDevice".
No caller actually passes null.
Fix anyway: splice in a local Error *err, and error_propagate().
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191204093625.14836-11-armbru@redhat.com>
build_guest_fsinfo_for_virtual_device() dereferences @errp when
build_guest_fsinfo_for_device() fails. That's wrong; see the big
comment in error.h. Introduced in commit 46d4c5723e "qga: Add
guest-get-fsinfo command".
No caller actually passes null.
Fix anyway: splice in a local Error *err, and error_propagate().
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
isa_ipmi_bt_realize(), ipmi_isa_realize(), pci_ipmi_bt_realize(), and
pci_ipmi_kcs_realize() dereference @errp when IPMIInterfaceClass
method init() fails. That's wrong; see the big comment in error.h.
Introduced in commit 0719029c47 "ipmi: Add an ISA KCS low-level
interface", then imitated in commit a9b74079cb "ipmi: Add a BT
low-level interface" and commit 12f983c6aa "ipmi: Add PCI IPMI
interfaces".
No caller actually passes null.
Fix anyway: splice in a local Error *err, and error_propagate().
Cc: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-9-armbru@redhat.com>
fit_load_fdt() passes @errp to fit_image_addr(), then recovers from
ENOENT failures. Passing @errp is wrong, because it works only as
long as @errp is neither @error_fatal nor @error_abort. Error
recovery dereferences @errp. That's also wrong; see the big comment
in error.h. Error recovery can leave *errp pointing to a freed
Error object. Wrong, it must be null on success. Messed up in
commit 3eb99edb48 "loader-fit: Wean off error_printf()".
No caller actually passes such values, or uses *errp on success.
Fix anyway: splice in a local Error *err, and error_propagate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
legacy_acpi_cpu_plug_cb() dereferences @errp when
acpi_set_cpu_present_bit() fails. That's wrong; see the big comment
in error.h. Introduced in commit cc43364de7 "acpi/cpu-hotplug:
introduce helper function to keep bit setting in one place".
No caller actually passes null, and acpi_set_cpu_present_bit() can't
actually fail.
Fix anyway: drop acpi_set_cpu_present_bit()'s @errp parameter.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20191204093625.14836-7-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
When os_mem_prealloc() fails, file_ram_alloc() calls qemu_ram_munmap()
and returns null. Except it doesn't when its @errp argument is null,
because it checks for failure with (errp && *errp). Introduced in
commit 056b68af77 "fix qemu exit on memory hotplug when allocation
fails at prealloc time".
No caller actually passes null.
Fix anyway: splice in a local Error *err, and error_propagate().
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20191204093625.14836-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Declaring a local Error *err without initializer looks suspicious.
Fuse the declaration with the initialization to avoid that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-4-armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-3-armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
