Commit Graph

379 Commits

Author SHA1 Message Date
Markus Armbruster a8b991b52d Clean up ill-advised or unusual header guards
Leading underscores are ill-advised because such identifiers are
reserved.  Trailing underscores are merely ugly.  Strip both.

Our header guards commonly end in _H.  Normalize the exceptions.

Done with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
2019-05-13 08:58:55 +02:00
Cao Jiaxi 8ac6557892 qga: Fix mingw compilation warnings on enum conversion
The win2qemu[] is supposed to be the conversion table to convert between
STORAGE_BUS_TYPE in Windows SDK and GuestDiskBusType in qga.

But it was incorrectly written that it forces to set a GuestDiskBusType
value to STORAGE_BUS_TYPE, which generates an enum conversion warning in clang.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003650.10137-1-driver1998@foxmail.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:03 +01:00
Marc-André Lureau 781f2b3d1e qga: process_event() simplification
Simplify the code around qmp_dispatch():
- rely on qmp_dispatch/check_obj() for message checking
- have a single send_response() point
- constify send_response() argument

It changes a couple of error messages:

* When @req isn't a dictionary, from
    Invalid JSON syntax
  to
    QMP input must be a JSON object

* When @req lacks member "execute", from
    this feature or command is not currently supported
  to
    QMP input lacks member 'execute'

CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-03-18 10:48:06 -05:00
Matt Hines 996b9cdc2f qga: Fix guest-get-fsinfo PCI address collection in Windows
The Windows QEMU guest agent erroneously tries to collect PCI information
directly from the physical drive. However, windows stores SCSI/IDE information
with the drive and PCI information with the underlying storage controller
This changes get_pci_info to use the physical drive's underlying storage
controller to get PCI information.

* Additionally Fixes incorrect size being passed to DeviceIoControl
  when getting volume extents. Can occasionally crash the guest agent

Signed-off-by: Matt Hines <mhines@scalecomputing.com>
*fix up some checkpatch warnings
*fix domain reporting and add some sanity checks for debug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 10:48:07 -05:00
Michael Roth 40cebc5811 qga-win: fix VSS build breakage due to unintended gnu99 C++ flag
Commit 7be41675f7 set -std=gnu99 for C code via QEMU_CFLAGS. Currently
we generate a "custom" QEMU_CXXFLAGS for VSS DLL C++ build by
filtering out some options from QEMU_CFLAGS and adding some others.
Since we don't filter out -std=gnu99 currently this breaks builds when
VSS support is enabled.

We could keep the existing approach, filter out -std=gnu99 from
QEMU_CFLAGS, and add -std=gnu++98, like configure currently does for
QEMU_CXXFLAGS, but as it turns out our resulting QEMU_CXXFLAGS would
be exactly what configure already generates, just with these filtered
out:

  -fstack-protector-all -fstack-protector-strong

and these added:

  -Wno-unknown-pragmas -Wno-delete-non-virtual-dtor

So fix the issue by re-using configure-generated QEMU_CXXFLAGS and
just handling these specific changes.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-18 10:24:20 -05:00
Michael Roth 82a58d270c qga-win: include glib when building VSS DLL
Commit 3ebee3b191 defined assert() as g_assert(), but when we build
the VSS DLL component of QGA (to handle fsfreeze) we do not include
glib, which results in breakage when building with VSS support enabled.

Fix this by including glib (along with the -lintl and -lws2_32
dependencies it brings).

Since the VSS DLL is built statically, this introduces an additional
dependency on static glib and supporting libs for the mingw environment
(possibly why we didn't include glib originally), but VSS support
already has very specific prerequisites so it shouldn't affect too many
build environments.

Since the VSS DLL code does use qemu/osdep.h, this should also help
avoid future breakages and possibly allow for some clean ups in current
VSS code.

Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 10:24:20 -05:00
Bishara AbuHattoum bd586a9133 qga-win: Adding support for Windows Server 2019 get-osinfo command
Since Windows Server 2016, Microsoft stopped upgrading the major and minor
versions of their new Windows Server product, so, the current functionality
of checking major and minor version numbers to determine the Windows Server
version wont work as expected.
The implemented solution here is to use the build number in addition to the
major and minor version numbers of the product to determine the Windows
Server product version.
The final build number of Windows Server 2016 is 14939, and
the final build number of Windows Server 2019 is 17764, so any Windows
Server product that has the major version of 10 and minor version of 0
with a build number lower or equal to 14939 will resemble 2016 and if the
build number is lower or equal to 17763 will resemble 2019.

Reference:
https://techcommunity.microsoft.com/t5/Windows-Server-Insiders/Windows-Server-2019-version-info/m-p/293112/highlight/true#M859

Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 10:24:20 -05:00
Daniel Henrique Barboza bb6c8d407e qga: update docs with systemd suspend support info
Commit 067927d62e ("qga: systemd hibernate/suspend/hybrid-sleep
support") failed to update qapi-schema.json after adding systemd
hibernate/suspend/hybrid-sleep capabilities to guest-suspend-* QGA
commands.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 10:24:20 -05:00
Paolo Bonzini eae3eb3e18 qemu/queue.h: simplify reverse access to QTAILQ
The new definition of QTAILQ does not require passing the headname,
remove it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Marc-André Lureau 4ac8086647 qga: drop < Vista compatibility
Building QGA for XP seems possible so far: the dependency on
libqemuutil.a implies building qemu-thread-win32.c, which requires
Vista API since commit 12f8def0 (v2.9). But qemu-thread isn't being
used in QGA, the resulting binary may still work on XP.  XP is no
longer supported for the past 4.5y, it's time to drop support for it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 13:57:25 +01:00
Marc-André Lureau 56cdca1d7a build-sys: build with Vista API by default
Both qemu & qga build with Vista API by default already, by defining
_WIN32_WINNT 0x0600. Set it globally in osdep.h instead.

This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem
to be really useful these days.
(see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 13:57:25 +01:00
Peter Maydell b72566a4ff Trivial patches (2018-12-18)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcGQQZAAoJEPMMOL0/L7480Q8QAJq1KW6pywJ8vKMDbDaDOgZw
 GwF8iKVtHCPClmDk3W7HHMRr1Ef9rwRrt/mdjzOehBSCep0J2PmPnqul/EXra0ot
 efyq6q20n1epordI3HuOTKqqvBkt7EUg2sqCWnHzT3qFe7FaZLnrJqChsm8B6psU
 IWTlaVNAo50J17TYo88UhIuME5WRZ9mdoiPEZ9pyvFaVrDKCnKZz1QPsqcjEJL1S
 sfLUhGrk8C03ZR7DG4ruULhF+tqYYT+vKTVNkL+1IvWHl3IIVJadC2yxPduH1JT4
 TLPAfRqpw4yjL/E6X3HMrDBeMd2H2bMRgTMapFFegaA9XPrvo5wJJoxix2WZ7Yw3
 efasQtRfZnh69GK2M81//G+61TnO0iDWDJmSjuo9IXrmJ29x2IqmZyqr8DlZ+bPd
 2+qRN4WrSfcTSJMqpMcP4tILAG53XvQ0xY4jJkQQZk4QHxWhlcmIQ+hLw0rE+NQj
 sTBLGvnIZ6nzWC5MVa1cAVXr52hyZhhElEVWEgxJ5vwDop5K3XZnEd0w7DMTEJpr
 lBLpWC0g8zn2xSy47KzrVVV5bJ/khm2M2X9y6XXHg1sft3DwUdgeBVwRGkDxir8P
 92UoIaur+xeYPj4eSvz8Bcx2lLktSOOFgNMsWCnMhxxVCkrCbT0Nt8UEFyn594xL
 gPPcBtYh3ryoGFLk7WRK
 =xjtK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging

Trivial patches (2018-12-18)

# gpg: Signature made Tue 18 Dec 2018 14:28:41 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-patches-pull-request:
  error: Remove NULL checks on error_propagate() calls
  vl: Use error_fatal to simplify obvious fatal errors (again)
  i386: hvf: drop debug printf in decode_sldtgroup
  docs/devel/build-system: fix 'softmu' typo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-19 15:31:02 +00:00
Markus Armbruster b2322003b6 error: Remove NULL checks on error_propagate() calls
Patch created mechanically by rerunning:

  $  spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \
            --macro-file scripts/cocci-macro-file.h \
            --dir . --in-place

Whitespace tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181213173113.11211-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-12-18 14:57:48 +01:00
Daniel Henrique Barboza f8a5777738 qga: update guest-suspend-ram and guest-suspend-hybrid descriptions
This patch updates the descriptions of 'guest-suspend-ram' and
'guest-suspend-hybrid' to mention that both commands relies now
on the proper support for wake up from suspend, retrieved by the
'wakeup-suspend-support' attribute of the 'query-current-machine'
QMP command.

Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20181205194701.17836-3-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-18 07:55:47 +01:00
Peter Maydell 61baac2fdb qga: Add multiple include guard to guest-agent-core.h
The guest-agent-core.h header was missing the usual guards
against multiple inclusion; add them.

(Spotted by lgtm.com's static analyzer.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-11-09 07:55:13 -06:00
Marc-André Lureau f898ee0f99 qga-win: fix leaks of build_guest_disk_info()
Introduced in commit b1ba8890e6, vol_h
handle should be closed, and "out" cleanup should be done after
DeviceIoControl() fails.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-11-09 07:50:02 -06:00
Bishara AbuHattoum b70d6afe4d qga-win: changing --retry-path option behavior
Currently whenever the qemu-ga's service doesn't find the virtio-serial
the run_agent() loops in a QGA_RETRY_INTERVAL (default 5 seconds)
intervals and try to restart the qemu-ga which causes a synchronous loop.
Changed to wait and listen for the serial events by registering for
notifications a proper serial event handler that deals with events:
  DBT_DEVICEARRIVAL        indicates that the device has been inserted and
                           is available
  DBT_DEVICEREMOVECOMPLETE indicates that the devive has been removed
Which allow us to determine when the channel path is available for the
qemu-ga to restart.

Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Michael Roth a2c1ac4e22 qga-win: report specific error when failing to open channel
Useful in general, but especially now that errors might occur more
frequently with --retry-path set.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Michael Roth ebc88c0ecf qga-win: install service with --retry-path set by default
It's nicer from a management perspective that the agent can survive
hotplug/unplug of the channel device, or be started prior to the
installation of the channel device's driver without and still be able
to resume normal function afterward. On linux there are alternatives
like systemd to support this, but on w32 --retry-path is the only
option so it makes sense to set it by default when installed as a
w32 service.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Michael Roth d951fadad6 qga: add --retry-path option for re-initializing channel on failure
This adds an option to instruct the agent to periodically attempt
re-opening the communication channel after a channel error has
occurred. The main use-case for this is providing an OS-independent
way of allowing the agent to survive situations like hotplug/unplug of
the communication channel, or initial guest set up where the agent may
be installed/started prior to the installation of the channel device's
driver.

There are nicer ways of implementing this functionality via things
like systemd services, but this option is useful for platforms like
*BSD/w32.

Currently a channel error will result in the GSource for that channel
being removed from the GMainLoop, but the main loop continuing to run.
That behavior results in a dead loop when --retry-path isn't set, and
prevents us from knowing when to attempt re-opening the channel when
it is set, so we also force the loop to exit as part of this patch.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Michael Roth d88495a864 qga: move w32 service handling out of run_agent()
Eventually we want a w32 service to be able to restart the qga main
loop from within service_main(). To allow for this we move service
handling out of run_agent() such that service_main() calls
run_agent() instead of the reverse.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Michael Roth 0f4d3a4912 qga: hang GAConfig/socket_activation off of GAState global
For w32 services we rely on the global GAState to access resources
associated with the agent within service_main(). Currently this is
sufficient for starting the agent since we open the channel once prior
to calling service_main(), and simply start the GMainLoop to start the
agent from within service_main().

Eventually we want to be able to also [re-]open the communication
channel from within service_main(), which requires access to
config/socket_activation variables, so we hang them off GAState in
preparation for that.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
*dont move GAConfig struct, just the typedef
*fix build bisect for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Michael Roth 50d5b3c465 qga: group agent init/cleanup init separate routines
This patch better separates the init/cleanup routines out into
separate functions to make the start-up procedure a bit easier to
follow. This will be useful when we eventually break out the actual
start/stop of the agent's main loop into separates routines that
can be called multiple times after the init phase.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Li Qiang d9c85b6cc5 qga: fix an off-by-one issue
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský 7fae518479 qga-win: demystify namespace stripping
It was not obvious what exactly the cryptic string copying does to the
GUID. This change makes the intent clearer.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský 4550dee80f qga-win: return disk device in guest-get-fsinfo
Report device UNC of the disk. It is reported as "\\.\PhysicalDriveX".

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský b1ba8890e6 qga-win: handle multi-disk volumes
Probe the volume for disk extents and return list of all disks.
Originally only first disk of composite volume was returned.

Note that the patch changes get_pci_info() from one state of brokenness
into a different state of brokenness. In other words it still does not do
what it's supposed to do (see comment in code). If anyone knows how to
fix it, please step in.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský 9e65fd659e qga-win: refactor disk info
Refactor building of disk info into a function that builds the list and
a function that returns infor for single disk. This will be used in
future commit that will handle multi-disk volumes.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský fb08aa703f qga-win: report disk serial number
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
*coding style fix-ups (declarations at beginning of block)
*improve readability for user-visible errors
*cover additional edge-cases with debug statements
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský c76d70f498 qga-win: refactor disk properties (bus)
Refactor code that queries bus type to be more generic. The function
get_disk_bus_type() has been renamed to build_guest_disk_info().
Following commit(s) will extend this function.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský 222682abb3 qga-win: add debugging information
The windows code generaly lacks debug information (compared to posix
code). This patch adds some related to HW info in guest-get-fsinfo
command.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Sameeh Jubran 6880b94f8a qga-win: fsinfo: pci-info: allow partial info
The call to SetupDiGetDeviceRegistryProperty might fail because the
value doesn't exist in the registry, in this case we shouldn't exit from
the loop but instead continue to look for other available values in the
registry and set this value as unavailable (-1).

Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
*squash in fix for when get_pci_info() returns NULL pci_controller field
*fix handling for error_set() cases in get_pci_info(), not just NULL return
*force all -1 PCI addr fields if any single one of them isn't found
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Sameeh Jubran 0d7f937e2a qga-win: prevent crash when executing fsinfo command
The fsinfo command is currently implemented for Windows only and it's disk
parameter can be enabled by adding the define "CONFIG_QGA_NTDDSCSI" to the qga
code. When enabled and executed the qemu-ga crashed with the following message:

------------------------------------------------
File qapi/qapi-visit-core.c, Line 49

Expression: !(v->type & VISITOR_OUTPUT) || *obj)
------------------------------------------------

After some digging, turns out that the GuestPCIAddress is null and the
qapi visitor doesn't like that, so we can always allocate it instead and
initiate all it's members to -1.

Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský 6589ce3573 qga: linux: return disk device in guest-get-fsinfo
Report device node of the disk on Linux (e.g. "/dev/sda2").
Requirs libudev.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Tomáš Golembiovský b616105a90 qga: linux: report disk serial number
Add reporting of disk serial number on Linux guests. The feature depends
on libudev.

Example:

    {
      "name": "dm-2",
      "mountpoint": "/",
      ...
      "disk": [
        {
          "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
          ...
        }
      ],
    }

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31 09:04:20 -05:00
Igor Mammedov b4bf912a6c qga: ignore non present cpus when handling qmp_guest_get_vcpus()
If VM has VCPUs plugged sparselly (for example a VM started with
3 VCPUs (cpu0, cpu1 and cpu2) and then cpu1 was hotunplugged so
only cpu0 and cpu2 are present), QGA will rise a error
  error: internal error: unable to execute QEMU agent command 'guest-get-vcpus':
  open("/sys/devices/system/cpu/cpu1/"): No such file or directory
when
  virsh vcpucount FOO --guest
is executed.
Fix it by ignoring non present CPUs when fetching CPUs status from sysfs.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30 16:48:49 -05:00
Chen Hanxiao 0692b03ee1 qga-win: add support for qmp_guest_fsfreeze_freeze_list
This patch add support for freeze specified fs.

The valid mountpoints list member are [1]:

  The path of a mounted folder, for example, Y:\MountX\
  A drive letter, for example, D:\
  A volume GUID path of the form \\?\Volume{GUID}\,
      where GUID identifies the volume
  A UNC path that specifies a remote file share,
      for example, \\Clusterx\Share1\

[1] https://docs.microsoft.com/en-us/windows/desktop/api/vsbackup/nf-vsbackup-ivssbackupcomponents-addtosnapshotset

Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30 16:48:49 -05:00
Jonathon Reinhart bad0227d3a qga: Support Unicode paths in guest-file-open on win32
Currently, the win32 port of QEMU Guest Agent does not properly handle Unicode
paths. The JSON decoder produces a valid UTF-8 path string, but this is passed
directly to CreateFileA, which is expecting an ANSI string and not UTF-8. This
leads to mangled filenames.

This patch follows the example of qmp_guest_set_user_password() and uses
g_utf8_to_utf16() to convert the string to UTF-16 and calls CreateFileW()
explicitly.

Signed-off-by: Jonathon Reinhart <jreinhart@cc-sw.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30 16:48:49 -05:00
Marc-André Lureau 9e6bdef224 util: add qemu_write_pidfile()
There are variants of qemu_create_pidfile() in qemu-pr-helper and
qemu-ga. Let's have a common implementation in libqemuutil.

The code is initially based from pr-helper write_pidfile(), with
various improvements and suggestions from Daniel Berrangé:

  QEMU will leave the pidfile existing on disk when it exits which
  initially made me think it avoids the deletion race. The app
  managing QEMU, however, may well delete the pidfile after it has
  seen QEMU exit, and even if the app locks the pidfile before
  deleting it, there is still a race.

  eg consider the following sequence

        QEMU 1        libvirtd        QEMU 2

  1.    lock(pidfile)

  2.    exit()

  3.                 open(pidfile)

  4.                 lock(pidfile)

  5.                                  open(pidfile)

  6.                 unlink(pidfile)

  7.                 close(pidfile)

  8.                                  lock(pidfile)

  IOW, at step 8 the new QEMU has successfully acquired the lock, but
  the pidfile no longer exists on disk because it was deleted after
  the original QEMU exited.

  While we could just say no external app should ever delete the
  pidfile, I don't think that is satisfactory as people don't read
  docs, and admins don't like stale pidfiles being left around on
  disk.

  To make this robust, I think we might want to copy libvirt's
  approach to pidfile acquisition which runs in a loop and checks that
  the file on disk /after/ acquiring the lock matches the file that
  was locked. Then we could in fact safely let QEMU delete its own
  pidfiles on clean exit..

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180831145314.14736-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 18:47:55 +02:00
Markus Armbruster 86cdf9ec8d json: Clean up headers
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h.  They all contain stuff that is of no interest
outside qobject/json-*.c.

Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
2018-08-24 20:26:37 +02:00
Markus Armbruster 84a56f38b2 json: Pass lexical errors and limit violations to callback
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself.  This sucks.

qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing.  I consider that a bug.

The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation.  Fix
it to pass a proper Error object then.  Update the callbacks:

* monitor.c's handle_qmp_command(): the code to make up an error is
  now dead, drop it.

* qga/main.c's process_event(): lumps the "both null" case together
  with the "not a JSON object" case.  The former is now gone.  The
  error message "Invalid JSON syntax" is misleading for the latter.
  Improve it to "Input must be a JSON object".

* qobject/qjson.c's consume_json(): no update; check-qjson
  demonstrates qobject_from_json() now sets an error on lexical
  errors, but still doesn't on some other errors.

* tests/libqtest.c's qmp_response(): the Error object is now reliable,
  so use it to improve the error message.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
2018-08-24 20:26:37 +02:00
Markus Armbruster 62815d85ae json: Redesign the callback to consume JSON values
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.

Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client.  This way is more easily integrated into an event loop that
dispatches input characters as they arrive.

Our JSON parser is kind of between the two.  The lexer feeds tokens to
a "streamer" instead of a real parser.  The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide).  It
feeds those token sequences to a callback provided by the client.  The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.

I figure it was done that way to make a straightforward recursive
descent parser possible.  "Get next token" becomes "pop the first
token off the token sequence".  Drawback: we need to store a complete
token sequence.  Each token eats 13 + input characters + malloc
overhead bytes.

Observations:

1. This is not the only way to use recursive descent.  If we replaced
   "get next token" by a coroutine yield, we could do without a
   streamer.

2. The lexer reports errors by passing a JSON_ERROR token to the
   streamer.  This communicates the offending input characters and
   their location, but no more.

3. The streamer reports errors by passing a null token sequence to the
   callback.  The (already poor) lexical error information is thrown
   away.

4. Having the callback receive a token sequence duplicates the code to
   convert token sequence to abstract syntax tree in every callback.

5. Known bug: the streamer silently drops incomplete token sequences.

This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer.  Later commits will address 3. and 5.

The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.

json_parser_parse() is now unused.  It's a stupid wrapper around
json_parser_parse_err().  Drop it, and rename json_parser_parse_err()
to json_parser_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
2018-08-24 20:26:37 +02:00
Marc-André Lureau ae7da1e5f6 qga: process_event() simplification and leak fix
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.

When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.

CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 18:54:26 -05:00
Sameeh Jubran c5840b905e qga-win: Handle fstrim for OSes lower than Win8
The defrag.exe tool which is used for executing the fstrim command
on Windows doesn't support retrim for OSes lower than Win8. This
commit handles this case and returns a suitable error.

Output of fstrim before this commit:
{"execute":"guest-fstrim"}
{"return": {"paths": [{"path": "C:\\", "error": "An invalid command line option
was specified. (0x89000008)"}, {"path": "F:\\", "error": "An invalid command
line option was specified. (0x89000008)"}, {"path": "S:\\", "error": "An
invalid command line option was specified. (0x89000008)"}]}}

Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1594113

Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
* use alternative version query code proposed by Sameeh
* fix up version check logic
* avoid CamelCase variable names when possible
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 18:45:21 -05:00
Paolo Bonzini d9c745c176 qga: fix file descriptor leak
The file descriptor for /sys/power/state was never closed.  Reported
by Coverity.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-16 15:05:58 -05:00
Marc-André Lureau bb23a7362a qga: fix 'driver' leak in guest-get-fsinfo
'driver' is leaked when the loop is not broken.

Leak introduced by commit 743c71d03c,
spotted by ASAN.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-16 12:51:32 -05:00
Peter Maydell 4fd1cbaf14 Monitor patches for 2018-07-03
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbO+iNAAoJEDhwtADrkYZTX9gQAJFT0DPtUYQsqbYAhrUIJo/a
 lT5OAnMnMou6Qu0XHjSYrqdZu7Ega00rvyeYgtB54lmLcOVrjAxF0SwcPcoOuz7K
 O9o00ZmwuFPUugJuYBLDRqJryejbZTCGSOg3cp+YlV6naW6Omck97iu7G/MZWLvB
 FJvIIUaPIAGklRhSodhC+yePp1PNbfGVcpDjAxn4e1UQ/2M6gwSFx9iPbNl2WotN
 CXjRHmkB4ZcxwcDtzzFLwkXTDkryZE27sOgFjDG5xFWO/oCS+Px7a0vME8YM+j2r
 eNa93g16ZohNqHb9t6GarlqrqNqbQF2t6JAPpmlIX5qb3Dtb87MQ/ExdN+FJ4btD
 IfBkTnXbs7qkZpConRlrhdd2J01ChnCdcmddUeenlq+8mIMjQJXH2RCwRVKyoZYs
 4Z74XWy2A+xMJgjqY9WO7E4jy4QVDSckKIm6je/O8fXzXWxthi4H1/2EN5nAv1hY
 zNxP/SW0vpqiR/cVQAr2N6VGz2/m9cWQIf0NwFc765gypPBbCL5HLrb+/xC86Bi3
 ylg9YlTw84oXtpSauTYu3oE989iDndu/s9BEUe5fW5g+8azs+h5SHVTwq0Y8dzSZ
 n2FsGxr76BlOIu5i1oIYNUUhAoU3txddueT4SNHE5Iaz1x6fAKnMP2hxoo5DWDzn
 1Rzgq4ATB8H+V6Og942n
 =/2SW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-07-03-v2' into staging

Monitor patches for 2018-07-03

# gpg: Signature made Tue 03 Jul 2018 22:20:13 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-07-03-v2: (32 commits)
  qapi: Polish command flags documentation in qapi-code-gen.txt
  monitor: Improve some comments
  qmp: Clean up capability negotiation after commit 02130314d8
  qobject: Let qobject_from_jsonf() fail instead of abort
  qmp: Switch timestamp_put() to qdict_from_jsonf_nofail()
  qmp: Add some comments around null responses
  qmp: Simplify monitor_qmp_respond()
  qmp: Replace get_qmp_greeting() by qmp_greeting()
  qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response()
  qmp: Use QDict * instead of QObject * for response objects
  qmp: De-duplicate error response building
  qobject: New qdict_from_jsonf_nofail()
  monitor: Peel off @mon_global wrapper
  monitor: Rename use_io_thr to use_io_thread
  qmp: Don't let JSON errors jump the queue
  qmp: Don't let malformed in-band commands jump the queue
  tests/qmp-test: Demonstrate QMP errors jumping the queue
  qmp: Simplify code around monitor_qmp_dispatch_one()
  qmp: Always free QMPRequest with qmp_request_free()
  qmp: Revert change to handle_qmp_command tracepoint
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-05 11:25:14 +01:00
Markus Armbruster d43b16945a qmp: Use QDict * instead of QObject * for response objects
By using the more specific type, we get fewer downcasts.  The
downcasts are safe, but not obviously so, at least not locally.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
2018-07-03 23:18:56 +02:00
Markus Armbruster cee32796ca qmp: De-duplicate error response building
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object.  Replace it by qmp_error_response() that
captures the duplicated code, including error_free().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
2018-07-03 23:18:56 +02:00
Markus Armbruster 674ed7228f qmp qemu-ga: Fix qemu-ga not to accept "control"
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control".  Fix that.

Out-of-band execution in a monitor that doesn't support it now fails
with

    {"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}

instead of

    {"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}

The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.

The new description is a bit unspecific, but it'll do.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
2018-07-03 23:18:56 +02:00