With this change, when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS
protocol feature has been negotiated, Qemu no longer sends the backend
all the memory regions in a single message. Rather, when the memory
tables are set or updated, a series of VHOST_USER_ADD_MEM_REG and
VHOST_USER_REM_MEM_REG messages are sent to transmit the regions to map
and/or unmap instead of sending send all the regions in one fixed size
VHOST_USER_SET_MEM_TABLE message.
The vhost_user struct maintains a shadow state of the VM’s memory
regions. When the memory tables are modified, the
vhost_user_set_mem_table() function compares the new device memory state
to the shadow state and only sends regions which need to be unmapped or
mapped in. The regions which must be unmapped are sent first, followed
by the new regions to be mapped in. After all the messages have been
sent, the shadow state is set to the current virtual device state.
Existing backends which do not support
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com>
Suggested-by: Mike Cui <cui@nutanix.com>
Message-Id: <1588533678-23450-5-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This change introduces a new feature to the vhost-user protocol allowing
a backend device to specify the maximum number of ram slots it supports.
At this point, the value returned by the backend will be capped at the
maximum number of ram slots which can be supported by vhost-user, which
is currently set to 8 because of underlying protocol limitations.
The returned value will be stored inside the VhostUserState struct so
that on device reconnect we can verify that the ram slot limitation
has not decreased since the last time the device connected.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com>
Message-Id: <1588533678-23450-4-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Convert DPRINTF() to traces or qemu_logs
Use IEC binary prefix definitions
Use qemu_semihosting_log_out() in target/unicore32
Some code and doc cleanup
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl7g21QSHGxhdXJlbnRA
dml2aWVyLmV1AAoJEPMMOL0/L7484YgP/jxlYNoSz3574j//OWJQnaprEjpI0EWT
MWkLb2sKnVAUyoJYLFGRuYl/aAOQvHqGcBUAsUzGWWUdq2HhTI1WlP1pIcxOodsm
aM0X6UOhuRs7zQDqZHPLUYoNEb/hpxj7RP0pUgh1JXaWucPoCznyZImPLJKIwkDz
bCS+H1HPRWc9IIb2wkMSfRMGy1gz+bP6Z/uaWLdwwWo/q2uoZ8LZVFmJ5owe5HPG
eA6alLdG1ZDn8XvUZYUoRZENFRxAz/gDtX2S1e3huej582sBNxfwH65+Y9dMs1Bo
FoihF1nKRjHejCyyO76QxkEuzgDxnw2w87WrEYBLUsWP1XeZfpb73wMO+1Z++IDL
8oLYZv310wQv7LJtlmKFb4tlFWJ5DLqwV7J0L03zUQ6zgZRMzQiDlogvJiWMKvv9
JLKQzUZsoKr9BjVUjYGO1PFW90koKDROHKM+ifBml8L1aIYbyOkq93b64qogik0L
Vt7n5nPK8ATD0QzZSmwaQL7Fj2ATh6KRdA1CWya3i4YvP91p5o0n87+k0IMbOXgT
aqB+d6nr8+CQDe6tudvmg8I45CV9uN9x4dnrKS+NVJrK/cogpOXiYovJ275FJkTE
Cu77eOWFYgImVxScAI2qvmvNqEzaLS9pSRNfOqGVz0JiTb/rWIRSugz7cvHdgQ2U
4OdHx1J3tupw
=jkE3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
Trivial branch pull request 20200610
Convert DPRINTF() to traces or qemu_logs
Use IEC binary prefix definitions
Use qemu_semihosting_log_out() in target/unicore32
Some code and doc cleanup
# gpg: Signature made Wed 10 Jun 2020 14:08:36 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
semihosting: remove the pthread include which seems unused
hw/openrisc/openrisc_sim: Add assertion to silence GCC warning
target/unicore32: Prefer qemu_semihosting_log_out() over curses
target/unicore32: Replace DPRINTF() by qemu_log_mask(GUEST_ERROR)
target/unicore32: Remove unused headers
target/i386/cpu: Use the IEC binary prefix definitions
hw/i386/xen/xen-hvm: Use the IEC binary prefix definitions
hw/hppa/dino: Use the IEC binary prefix definitions
hw/arm/aspeed: Correct DRAM container region size
qemu-img: Fix doc typo for 'bitmap' subcommand
hw/misc/auxbus: Use qemu_log_mask(UNIMP) instead of debug printf
hw/isa/apm: Convert debug printf()s to trace events
hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()
.mailmap: Update Fred Konrad email address
net: Do not include a newline in the id of -nic devices
Fix parameter type in vhost migration log path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# .mailmap
The #ifdef CONFIG_VFIO_IGD in pci-quirks.c is not working since the
required header config-devices.h is not included, so that the legacy
IGD passthrough is currently broken. Let's include the right header
to fix this issue.
Buglink: https://bugs.launchpad.net/qemu/+bug/1882784
Fixes: 29d62771c8 ("hw/vfio: Move the IGD quirk code to a separate file")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The VMD endpoint provides a real PCIe domain to the guest, including
bridges and endpoints. Because the VMD domain is enumerated by the guest
kernel, the guest kernel will assign Guest Physical Addresses to the
downstream endpoint BARs and bridge windows.
When the guest kernel performs MMIO to VMD sub-devices, MMU will
translate from the guest address space to the physical address space.
Because the bridges have been programmed with guest addresses, the
bridges will reject the transaction containing physical addresses.
VMD device 28C0 natively assists passthrough by providing the Host
Physical Address in shadow registers accessible to the guest for bridge
window assignment. The shadow registers are valid if bit 1 is set in VMD
VMLOCK config register 0x70.
In order to support existing VMDs, this quirk provides the shadow
registers in a vendor-specific PCI capability to the vfio-passthrough
device for all VMD device ids which don't natively assist with
passthrough. The Linux VMD driver is updated to check for this new
vendor-specific capability.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- documenation fix
- various improvements to qcow2.py program used in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl7f9hsACgkQp6FrSiUn
Q2pLhAf+OrRJZFO5yY/r3UmNlWs9r3ZkE7nAOlRdDWmqeO0dwq+IOVa/TXoGf4vT
dqqEqnFZ6adwQD9HFHKtL50qEwcBiHlNp65WnqfQs8wlFoDo2pckd0UTAR04yM8R
d62Ip7l5Rv3cIT8R7/plwitypNvq8oUFKSwfnvlcHzP7/0Jspq784Nam7bNvj4L1
lurdsYUrbPc1DKlDL1UNaLA0v9+9QoSICBzKV6qgFtpPyRAT1Y83f3QmpiMGE4rQ
Djr3Hs8uGUskpv9yGFbakLscQO/Zws1VUnCsH97X1P1S5lXd2x/I//ydxGL+DkPY
cdgu7PmziBLuTdnaOyJ/xd3CTUpddQ==
=nhZT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-06-09' into staging
bitmaps patches for 2020-06-09
- documenation fix
- various improvements to qcow2.py program used in iotests
# gpg: Signature made Tue 09 Jun 2020 21:50:35 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-bitmaps-2020-06-09:
iotests: Fix 291 across more file systems
qcow2_format.py: dump bitmaps header extension
qcow2: QcowHeaderExtension print names for extension magics
qcow2_format: refactor QcowHeaderExtension as a subclass of Qcow2Struct
qcow2_format.py: QcowHeaderExtension: add dump method
qcow2_format.py: add field-formatting class
qcow2_format.py: separate generic functionality of structure classes
qcow2_format.py: use strings to specify c-type of struct fields
qcow2_format.py: use modern string formatting
qcow2_format.py: use tuples instead of lists for fields
qcow2_format.py: drop new line printing at end of dump()
qcow2.py: move qcow2 format classes to separate module
qcow2.py: add licensing blurb
qcow2.py: python style fixes
qemu-img: Fix doc typo for 'bitmap' subcommand
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl7ftzkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+N5Af9H2MaCN9Eka7VmHAd
duob3PBkGsQ8jOCOtOQMVukkptkOk2cMycXlW77DJsVrjX3nzpJ6yZ52MH4WO0vn
ddFeutkK4iaw+3mBQkEFaJC1H8GavuHz0dMK5NR3WtOvAnZ1eQyEbqFTkbMHJgFI
TVyNUz3jfsqCLBDxEx8JU3v5dycMET3WKlvFP6aO2FnQNKBSZXnxTcd7eCN67KOs
e+XmBvcsLuGp6fxrIrNFwakjy48jExytfMRdWVSDulC0ErUw9bV4fI9Z8kHV5ETd
bL+q5ADFKvogEQeGW74+44zebtmgosO1GWDMfbSTjIdnUQrdAff+Y7huHateaXWs
+FHszA==
=Z5Ta
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-dt-20200609' into staging
Add non-overlapping groups
# gpg: Signature made Tue 09 Jun 2020 17:22:17 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-dt-20200609:
target/arm: Use a non-overlapping group for misc control
decodetree: Drop check for less than 2 patterns in a group
tests/decode: Test non-overlapping groups
decodetree: Implement non-overlapping groups
decodetree: Move semantic propagation into classes
decodetree: Allow group covering the entire insn space
decodetree: Split out MultiPattern from IncMultiPattern
decodetree: Rename MultiPattern to IncMultiPattern
decodetree: Tidy error_with_file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 93676c88 relaxed our NBD client code to request export names up
to the NBD protocol maximum of 4096 bytes without NUL terminator, even
though the block layer can't store anything longer than 4096 bytes
including NUL terminator for display to the user. Since this means
there are some export names where we have to truncate things, we can
at least try to make the truncation a bit more obvious for the user.
Note that in spite of the truncated display name, we can still
communicate with an NBD server using such a long export name; this was
deemed nicer than refusing to even connect to such a server (since the
server may not be under our control, and since determining our actual
length limits gets tricky when nbd://host:port/export and
nbd+unix:///export?socket=/path are themselves variable-length
expansions beyond the export name but count towards the block layer
name length).
Reported-by: Xueqiang Wei <xuwei@redhat.com>
Fixes: https://bugzilla.redhat.com/1843684
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200610163741.3745251-3-eblake@redhat.com>
Ever since commit 36683283 (v2.8), the server code asserts that error
strings sent to the client are well-formed per the protocol by not
exceeding the maximum string length of 4096. At the time the server
first started sending error messages, the assertion could not be
triggered, because messages were completely under our control.
However, over the years, we have added latent scenarios where a client
could trigger the server to attempt an error message that would
include the client's information if it passed other checks first:
- requesting NBD_OPT_INFO/GO on an export name that is not present
(commit 0cfae925 in v2.12 echoes the name)
- requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is
not present (commit e7b1948d in v2.12 echoes the name)
At the time, those were still safe because we flagged names larger
than 256 bytes with a different message; but that changed in commit
93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD
string limit. (That commit also failed to change the magic number
4096 in nbd_negotiate_send_rep_err to the just-introduced named
constant.) So with that commit, long client names appended to server
text can now trigger the assertion, and thus be used as a denial of
service attack against a server. As a mitigating factor, if the
server requires TLS, the client cannot trigger the problematic paths
unless it first supplies TLS credentials, and such trusted clients are
less likely to try to intentionally crash the server.
We may later want to further sanitize the user-supplied strings we
place into our error messages, such as scrubbing out control
characters, but that is less important to the CVE fix, so it can be a
later patch to the new nbd_sanitize_name.
Consideration was given to changing the assertion in
nbd_negotiate_send_rep_verr to instead merely log a server error and
truncate the message, to avoid leaving a latent path that could
trigger a future CVE DoS on any new error message. However, this
merely complicates the code for something that is already (correctly)
flagging coding errors, and now that we are aware of the long message
pitfall, we are less likely to introduce such errors in the future,
which would make such error handling dead code.
Reported-by: Xueqiang Wei <xuwei@redhat.com>
CC: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761
Fixes: 93676c88d7
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200610163741.3745251-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Most x87 instruction implementations fail to raise the expected IEEE
floating-point exceptions because they do nothing to convert the
exception state from the softfloat machinery into the exception flags
in the x87 status word. There is special-case handling of division to
raise the divide-by-zero exception, but that handling is itself buggy:
it raises the exception in inappropriate cases (inf / 0 and nan / 0,
which should not raise any exceptions, and 0 / 0, which should raise
"invalid" instead).
Fix this by converting the floating-point exceptions raised during an
operation by the softfloat machinery into exceptions in the x87 status
word (passing through the existing fpu_set_exception function for
handling related to trapping exceptions). There are special cases
where some functions convert to integer internally but exceptions from
that conversion are not always correct exceptions for the instruction
to raise.
There might be scope for some simplification if the softfloat
exception state either could always be assumed to be in sync with the
state in the status word, or could always be ignored at the start of
each instruction and just set to 0 then; I haven't looked into that in
detail, and it might run into interactions with the various ways the
emulation does not yet handle trapping exceptions properly. I think
the approach taken here, of saving the softfloat state, setting
exceptions there to 0 and then merging the old exceptions back in
after carrying out the operation, is conservatively safe.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152120280.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When mapping physical memory into host's virtual address space,
'address_space_map' may return NULL if BounceBuffer is in_use.
Set and return '*plen = 0' to avoid later NULL pointer dereference.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: https://bugs.launchpad.net/qemu/+bug/1878259
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200526111743.428367-1-ppandit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not checking the value of malloc will cause a warning with GCC 10.1,
which may result in configuration failure, with the following line in
config.log:
config-temp/qemu-conf.c:2:18: error: ignoring return value of ‘malloc’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
2 | int main(void) { malloc(1); return 0; }
| ^~~~~~~~~
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Message-Id: <20200524221204.9791-1-lb.workbox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After upgrading to Ubuntu 20.04 LTS, GCC 9.3 complains:
util/qemu-thread-posix.c: In function ‘qemu_thread_exit’:
util/qemu-thread-posix.c:577:6: error: function might be candidate for attribute ‘noreturn’ [-Werror=suggest-attribute=noreturn]
577 | void qemu_thread_exit(void *retval)
| ^~~~~~~~~~~~~~~~
Fix by marking the qemu_thread_exit function with QEMU_NORETURN
to set the 'noreturn' attribute.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
getpid is good enough in a mono thread context, however thr_self/_lwp_self
reflects the real current thread identifier from a given process.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
The Perfmon and Debug Capability MSR named IA32_PERF_CAPABILITIES is
a feature-enumerating MSR, which only enumerates the feature full-width
write (via bit 13) by now which indicates the processor supports IA32_A_PMCx
interface for updating bits 32 and above of IA32_PMCx.
The existence of MSR IA32_PERF_CAPABILITIES is enumerated by CPUID.1:ECX[15].
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200529074347.124619-5-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit acb9f95a removed boundary checks for ID and VCPU ID. After that,
the max definitions of that boundaries are not required anymore. This
commit is only a code cleanup.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Message-Id: <20200323200538.202164-1-jcfaracco@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In record/replay icount mode main loop thread and vCPU thread
do not perform simultaneously. They take replay mutex to synchronize
the actions. Sometimes vCPU thread waits for locking the mutex for
very long time, because main loop releases the mutex and takes it
back again. Standard qemu mutex do not provide the ordering
capabilities.
This patch adds a "queue" for replay mutex. Therefore thread ordering
becomes more "fair". Threads are executed in the same order as
they are trying to take the mutex.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <158823802979.28101.9340462887738957616.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many reserved bits of amd_iommu commands are defined incorrectly in QEMU.
Because of it, QEMU incorrectly injects lots of illegal commands into guest
VM's IOMMU event log.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20200418042845.596457-1-wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable MicroBlaze testing.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200416193303.23674-2-edgar.iglesias@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In tcp_chr_sync_read function, there is a possibility of socket
disconnection during blocking read, then tcp_chr_hup function would clean up
the qio channel pointers(i.e ioc, sioc).
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-Id: <1587289900-29485-1-git-send-email-sai.pavan.boddu@xilinx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is majorly only for X86 because that's the only one that supports
split irqchip for now.
When the irqchip is split, we face a dilemma that KVM irqfd will be
enabled, however the slow irqchip is still running in the userspace.
It means that the resamplefd in the kernel irqfds won't take any
effect and it will miss to ack INTx interrupts on EOIs.
One example is split irqchip with VFIO INTx, which will break if we
use the VFIO INTx fast path.
This patch can potentially supports the VFIO fast path again for INTx,
that the IRQ delivery will still use the fast path, while we don't
need to trap MMIOs in QEMU for the device to emulate the EIOs (see the
callers of vfio_eoi() hook). However the EOI of the INTx will still
need to be done from the userspace by caching all the resamplefds in
QEMU and kick properly for IOAPIC EOI broadcast.
This is tricky because in this case the userspace ioapic irr &
remote-irr will be bypassed. However such a change will greatly boost
performance for assigned devices using INTx irqs (TCP_RR boosts 46%
after this patch applied).
When the userspace is responsible for the resamplefd kickup, don't
register it on the kvm_irqfd anymore, because on newer kernels (after
commit 654f1f13ea56, 5.2+) the KVM_IRQFD will fail if with both split
irqchip and resamplefd. This will make sure that the fast path will
work for all supported kernels.
https://patchwork.kernel.org/patch/10738541/#22609933
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So that kvm_irqchip_assign_irqfd() can have access to the
EventNotifiers, especially the resample event. It is needed in follow
up patch to cache and kick resamplefds from QEMU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VFIO is currently the only one left that is not using the generic
function (kvm_irqchip_add_irqfd_notifier_gsi()) to register irqfds.
Let VFIO use the common framework too.
Follow up patches will introduce extra features for kvm irqfd, so that
VFIO can easily leverage that after the switch.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX512_VP2INTERSECT compute vector pair intersection to a pair
of mask registers, which is introduced with intel Tiger Lake,
defining as CPUID.(EAX=7,ECX=0):EDX[bit 08].
Refer to the following release spec:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <1586760758-13638-1-git-send-email-cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trying libFuzzer on the vmport device, we get:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==29476==ERROR: AddressSanitizer: SEGV on unknown address 0x000000008840 (pc 0x56448bec4d79 bp 0x7ffeec9741b0 sp 0x7ffeec9740e0 T0)
==29476==The signal is caused by a READ memory access.
#0 0x56448bec4d78 in vmport_ioport_read (qemu-fuzz-i386+0x1260d78)
#1 0x56448bb5f175 in memory_region_read_accessor (qemu-fuzz-i386+0xefb175)
#2 0x56448bb30c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13)
#3 0x56448bb2ea27 in memory_region_dispatch_read1 (qemu-fuzz-i386+0xecaa27)
#4 0x56448bb2e443 in memory_region_dispatch_read (qemu-fuzz-i386+0xeca443)
#5 0x56448b961ab1 in flatview_read_continue (qemu-fuzz-i386+0xcfdab1)
#6 0x56448b96336d in flatview_read (qemu-fuzz-i386+0xcff36d)
#7 0x56448b962ec4 in address_space_read_full (qemu-fuzz-i386+0xcfeec4)
This is easily reproducible using:
$ echo inb 0x5658 | qemu-system-i386 -M isapc,accel=qtest -qtest stdio
[I 1589796572.009763] OPENED
[R +0.008069] inb 0x5658
Segmentation fault (core dumped)
$ coredumpctl gdb -q
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77
77 eax = env->regs[R_EAX];
(gdb) p cpu
$1 = (X86CPU *) 0x0
(gdb) bt
#0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77
#1 0x00005605b53db114 in memory_region_read_accessor (mr=0x5605b7531d80, addr=0, value=0x7ffc9d261a30, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:434
#2 0x00005605b53db5d4 in access_with_adjusted_size (addr=0, value=0x7ffc9d261a30, size=1, access_size_min=4, access_size_max=4, access_fn=
0x5605b53db0d2 <memory_region_read_accessor>, mr=0x5605b7531d80, attrs=...) at memory.c:544
#3 0x00005605b53de156 in memory_region_dispatch_read1 (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, size=1, attrs=...) at memory.c:1396
#4 0x00005605b53de228 in memory_region_dispatch_read (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, op=MO_8, attrs=...) at memory.c:1424
#5 0x00005605b537c80a in flatview_read_continue (fv=0x5605b7650290, addr=22104, attrs=..., ptr=0x7ffc9d261b4b, len=1, addr1=0, l=1, mr=0x5605b7531d80) at exec.c:3200
#6 0x00005605b537c95d in flatview_read (fv=0x5605b7650290, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3239
#7 0x00005605b537c9e6 in address_space_read_full (as=0x5605b5f74ac0 <address_space_io>, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3252
#8 0x00005605b53d5a5d in address_space_read (len=1, buf=0x7ffc9d261b4b, attrs=..., addr=22104, as=0x5605b5f74ac0 <address_space_io>) at include/exec/memory.h:2401
#9 0x00005605b53d5a5d in cpu_inb (addr=22104) at ioport.c:88
X86CPU is NULL because QTest accelerator does not use CPU.
Fix by returning default values when QTest accelerator is used.
Reported-by: Clang AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fist / fistt family of instructions should all store the most
negative integer in the destination format when the rounded /
truncated integer result is out of range or the input is an invalid
encoding, infinity or NaN. The fisttpl and fisttpll implementations
(32-bit and 64-bit results, truncate towards zero) failed to do this,
producing the most positive integer in some cases instead. Fix this
by copying the code used to handle this issue for fistpl and fistpll,
adjusted to use the _round_to_zero functions for the actual
conversion (but without any other changes to that code).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152119160.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation fails to check for out-of-range and invalid
values, instead just taking the result of conversion to int64_t and
storing its sign and low 18 decimal digits. Fix this by checking for
an out-of-range result (invalid conversions always result in INT64_MAX
or INT64_MIN from the softfloat code, which are large enough to be
considered as out-of-range by this code) and storing the packed BCD
indefinite encoding in that case.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132351110.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation stores +0 when the rounded result should be
-0 because it compares an integer value with 0 to determine the sign.
Fix this by checking the sign bit of the operand instead.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132350230.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam implementation does not check for invalid encodings, instead
treating them like NaN or normal numbers depending on the exponent.
Fix it to check that the high bit of the significand is set before
treating an encoding as NaN or normal, thus resulting in correct
handling (all of C0, C2 and C3 cleared) for invalid encodings.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132349311.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementations of the fldl2t, fldl2e, fldpi, fldlg2 and fldln2
instructions load fixed constants independent of the rounding mode.
Fix them to load a value correctly rounded for the current rounding
mode (but always rounded to 64-bit precision independent of the
precision control, and without setting "inexact") as specified.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2005132348310.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not ignore the MemTxResult error type returned by
address_space_write().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both cpu_memory_rw_debug() and address_space_read() return
an error on failed transaction. Check the returned value,
and return EIO in case of error.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not ignore the MemTxResult error type returned by
the address_space_rw() API.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both address_space_read_cached_slow() and
address_space_write_cached_slow() return a MemTxResult type.
Do not discard it, return it to the caller.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation uses floatx80_scalbn for the final scaling
operation. floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU. But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set. Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn. In round-to-nearest mode, and ignoring exceptions,
this works in many cases. But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes. Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero). Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fscale instruction returns a NaN exponent
unchanged. Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use unsigned type for the MegasasState fields which hold positive
numeric values.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200513192540.1583887-4-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While in megasas_handle_frame(), megasas_enqueue_frame() may
set a NULL frame into MegasasCmd object for a given 'frame_addr'
address. Add check to avoid a NULL pointer dereference issue.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: https://bugs.launchpad.net/qemu/+bug/1878259
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200513192540.1583887-3-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A guest user may set 'reply_queue_head' field of MegasasState to
a negative value. Later in 'megasas_lookup_frame' it is used to
index into s->frames[] array. Use unsigned type to avoid OOB
access issue.
Also check that 'index' value stays within s->frames[] bounds
through the while() loop in 'megasas_lookup_frame' to avoid OOB
access.
Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200513192540.1583887-2-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we hotplug vcpus, cpu_update_state is added to vm_change_state_head
in kvm_arch_init_vcpu(). But it forgot to delete in kvm_arch_destroy_vcpu() after
unplug. Then it will cause a use-after-free access. This patch delete it in
kvm_arch_destroy_vcpu() to fix that.
Reproducer:
virsh setvcpus vm1 4 --live
virsh setvcpus vm1 2 --live
virsh suspend vm1
virsh resume vm1
The UAF stack:
==qemu-system-x86_64==28233==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e00002e798 at pc 0x5573c6917d9e bp 0x7fff07139e50 sp 0x7fff07139e40
WRITE of size 1 at 0x62e00002e798 thread T0
#0 0x5573c6917d9d in cpu_update_state /mnt/sdb/qemu/target/i386/kvm.c:742
#1 0x5573c699121a in vm_state_notify /mnt/sdb/qemu/vl.c:1290
#2 0x5573c636287e in vm_prepare_start /mnt/sdb/qemu/cpus.c:2144
#3 0x5573c6362927 in vm_start /mnt/sdb/qemu/cpus.c:2150
#4 0x5573c71e8304 in qmp_cont /mnt/sdb/qemu/monitor/qmp-cmds.c:173
#5 0x5573c727cb1e in qmp_marshal_cont qapi/qapi-commands-misc.c:835
#6 0x5573c7694c7a in do_qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:132
#7 0x5573c7694c7a in qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:175
#8 0x5573c71d9110 in monitor_qmp_dispatch /mnt/sdb/qemu/monitor/qmp.c:145
#9 0x5573c71dad4f in monitor_qmp_bh_dispatcher /mnt/sdb/qemu/monitor/qmp.c:234
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513132630.13412-1-pannengyuan@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dynamic allocating vcpu state structure according to smp value to be
more precise and safe. Previously it will alloccate array of fixed size
HAX_MAX_VCPU.
This is achieved by using g_new0 to dynamic allocate the array. The
allocated size is obtained from smp.max_cpus in MachineState. Also, the
size is compared with HAX_MAX_VCPU when creating the vm. The reason for
choosing dynamic array over linked list is because the status is visited
by index all the time.
This will lead to QEMU checking whether the smp value is larger than the
HAX_MAX_VCPU when creating vm, if larger, the process will terminate,
otherwise it will allocate array of size smp to store the status.
V2: Check max_cpus before open vm. (Philippe)
Signed-off-by: WangBowen <bowen.wang@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <20200509035952.187615-1-colin.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before recent commit abc9bf69a6, configure_icount() returned early
when option "shift" was absent: succeed when option "align" was also
absent, else fail.
Since then, it still errors out when only "align" is present, but
continues when both are absent. Crashes when examining the value of
"shift" further. Reproducer: -icount "".
Revert this erroneous part of the commit.
Fixes: abc9bf69a6
Fixes: Coverity CID 1428754
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515042231.18201-1-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
You can omit .instance_size if it is the same as that of the parent.
.class_size = sizeof(ObjectClass)
... is omitted here, so removing .instance_size is more consistent.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20200513033600.2709646-1-masahiroy@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Raphael Norwitz