Commit Graph

621 Commits

Author SHA1 Message Date
Juan Quintela
f20e286516 ram: Use ramblock and page offset instead of absolute offset
This removes the needto pass also the absolute offset.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:40 +02:00
Juan Quintela
a935e30fbb ram: Change offset field in PageSearchStatus to page
We are moving everything to work on pages, not addresses.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
269ace2951 ram: Remember last_page instead of last_offset
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

--

Improve comment
Fix typo
2017-04-21 12:25:39 +02:00
Juan Quintela
06b106889a ram: Use page number instead of an address for the bitmap operations
We use an unsigned long for the page number.  Notice that our bitmaps
already got that for the index, so we have that limit.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

--

rename page to page_abs everywhere.
fix trace types for pages
2017-04-21 12:25:39 +02:00
Juan Quintela
2479569466 ram: reorganize last_sent_block
We were setting it far away of when we changed it.  Now everything is
done inside save_page_header.  Once there, reorganize code to pass
RAMState.  We also set CONTINUE flag in a single place.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
aaa2064c2a ram: ram_discard_range() don't use the mis parameter
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
15440dd5a0 ram: Pass RAMBlock to bitmap_sync
We change the meaning of start to be the offset from the beggining of
the block.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:39 +02:00
Chao Fan
030ce1f861 ram: Add page-size to output in 'info migrate'
The number of dirty pages is output in 'pages' in the command
'info migrate', so add page-size to calculate the number of dirty
pages in bytes.

Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
20afaed98b ram: Rename qemu_target_page_bits() to qemu_target_page_size()
It was used as a size in all cases except one.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
a0a8aa147a ram: We don't need MigrationState parameter anymore
Remove it from callers and callees.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
5727309d25 migration: Remove MigrationState from migration_in_postcopy
We need to call for the migrate_get_current() in more that half of the
uses, so call that inside.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
6d358d9494 ram: Remove compression_switch and inline its logic
We can calculate its value, so we don't create a variable for it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

--

After Peter and Dave review, I dropped the variable and just inlined
the condition.

Fix typo
2017-04-21 12:25:39 +02:00
Juan Quintela
ce25d33781 ram: Move QEMUFile into RAMState
We receive the file from save_live operations and we don't use it
until 3 or 4 levels of calls down.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:39 +02:00
Juan Quintela
204b88b869 ram: Add QEMUFile to RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:38 +02:00
Juan Quintela
96506894a3 ram: Move postcopy_requests into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:38 +02:00
Juan Quintela
47ad861976 ram: Move dirty_pages_rate to RAMState
Treat it like the rest of ram stats counters.  Export its value the
same way.  As an added bonus, no more MigrationState used in
migration_bitmap_sync();

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Again, dave was the one reviewing it
2017-04-21 12:25:38 +02:00
Juan Quintela
abbf1d7f9b ram: Remove dirty_bytes_rate
It can be recalculated from dirty_pages_rate.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Dave was the one that reviewed it O:-)
2017-04-21 12:25:38 +02:00
Juan Quintela
42d219d3b0 ram: Create ram_dirty_sync_count()
This is a ram field that was inside MigrationState.  Move it to
RAMState and make it the same that the other ram stats.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
ec481c6c57 ram: Move src_page_req* to RAMState
This are the last postcopy fields still at MigrationState.  Once there
Move MigrationSrcPageRequest to ram.c and remove MigrationState
parameters where appropiate.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
68a098f386 ram: Move last_req_rb to RAMState
It was on MigrationState when it is only used inside ram.c for
postcopy.  Problem is that we need to access it without being able to
pass it RAMState directly.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
9edabd4de6 ram: Remove ram_save_remaining
Just unfold it.  Move ram_bytes_remaining() with the rest of exported
functions.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
072c251157 ram: Use the RAMState bytes_transferred parameter
Somewhere it was passed by reference, just use it from RAMState.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
2f4fde9352 ram: Move bytes_transferred into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
eb859c53dd ram: Move migration_bitmap_rcu into RAMState
Once there, rename the type to be shorter.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
108cfae019 ram: Move migration_bitmap_mutex into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
ceb4d16898 ram: Everything was init to zero, so use memset
And then init only things that are not zero by default.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
0d8ec885ed ram: Move migration_dirty_pages to RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
180f61f75a ram: Move xbzrle_overflows into RAMState
Once there, remove the now unused AccountingInfo struct and var.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
b07016b674 ram: Move xbzrle_cache_miss_rate into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
544c36f188 ram: Move xbzrle_cache_miss into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:37 +02:00
Juan Quintela
f36ada95de ram: Move xbzrle_pages into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Comment why we need bytes and pages
2017-04-21 12:25:37 +02:00
Juan Quintela
07ed50a2bb ram: Move xbzrle_bytes into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
23b28c3c62 ram: Move iterations into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
29cc3d8a9b ram: Remove norm_mig_bytes_transferred
Its value can be calculated by other exported.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
b4d1c6e722 ram: Move norm_pages to RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
bedf53c14c ram: Remove unused pages_skipped variable
For compatibility, we need to still send a value, but just specify it
and comment the fact.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
5bb1272c38 ram: Remove unused dup_mig_bytes_transferred()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
f7ccd61b4c ram: Move dup_pages into RAMState
Once there rename it to its actual meaning, zero_pages.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
36040d9cb2 ram: Move iterations_prev into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-04-21 12:25:36 +02:00
Juan Quintela
b5833fde40 ram: Move xbzrle_cache_miss_prev into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-04-21 12:25:36 +02:00
Juan Quintela
68908ed665 ram: Change num_dirty_pages_period type to uint64_t
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
a66cd90c74 ram: Move num_dirty_pages_period into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
c4bdf0cf4b ram: Change byte_xfer_{prev,now} type to uint64_t
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
eac7415958 ram: Move bytes_xfer_prev into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:36 +02:00
Juan Quintela
f664da80fc ram: Move start time into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Renamed start_time to time_last_bitmap_sync(peterx suggestion)
2017-04-21 12:25:35 +02:00
Juan Quintela
5a98773896 ram: Move bitmap_sync_count into RAMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:35 +02:00
Juan Quintela
8d820d6f67 ram: Add dirty_rate_high_cnt to RAMState
We need to add a parameter to several functions to make this work.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:35 +02:00
Juan Quintela
6f37bb8bf3 ram: Create RAMState
We create a struct where to put all the ram state

Start with the following fields:

last_seen_block, last_sent_block, last_offset, last_version and
ram_bulk_stage are globals that are really related together.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Fix typo and warnings
2017-04-21 12:25:35 +02:00
Juan Quintela
3644915726 ram: Rename block_name to rbname
So all places are consistent on the naming of a block name parameter.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-21 12:25:35 +02:00
Juan Quintela
5e58f968f4 ram: Rename flush_page_queue() to migration_page_queue_free()
It reflects better what it does.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-21 12:25:35 +02:00
Juan Quintela
3d0684b2ad ram: Update all functions comments
Added doc comments for existing functions comment and rewrite them in
a common style.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Fix Peter Xu comments
Improve postcopy comments as per reviews.
2017-04-21 12:25:35 +02:00
Lidong Chen
3928d50bf1 migration/block: use blk_pwrite_zeroes for each zero cluster
BLOCK_SIZE is (1 << 20), qcow2 cluster size is 65536 by default,
this may cause the qcow2 file size to be bigger after migration.
This patch checks each cluster, using blk_pwrite_zeroes for each
zero cluster.

[Initialize cluster_size to BLOCK_SIZE to prevent a gcc uninitialized
variable compiler warning.  In reality we always initialize cluster_size
in a conditional but gcc doesn't know that.
--Stefan]

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-id: 1492050868-16200-1-git-send-email-lidongchen@tencent.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-21 10:36:12 +01:00
Kevin Wolf
d35ff5e6b3 block: Ignore guest dev permissions during incoming migration
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.

This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.

Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
2017-04-07 14:44:05 +02:00
Dr. David Alan Gilbert
8679638b0e postcopy: Check for shared memory
Postcopy doesn't support migration of RAM shared with another process
yet (we've got a bunch of things to understand).
Check for the case and don't allow postcopy to be enabled.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-16 09:02:26 +01:00
QingFeng Hao
e1e686c1fa vmstate: fix failed iotests case 68 and 91
This problem affects s390x only if we are running without KVM.
Basically, S390CPU.irqstate is unused if we do not use KVM,
and thus no buffer is allocated.
This causes size=0, first_elem=NULL and n_elems=1 in
vmstate_load_state and vmstate_save_state. And the assert fails.
With this fix we can go back to the old behavior and support
VMS_VBUFFER with size 0 and nullptr.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-16 08:59:52 +01:00
Lidong Chen
1cf6aa74b3 migration/block: Avoid invoking blk_drain too frequently
Increase bmds->cur_dirty after submit io, so reduce the frequency
involve into blk_drain, and improve the performance obviously
when block migration.

The performance test result of this patch:

During the block dirty save phase, this patch improve guest os IOPS
from 4.0K to 9.5K. and improve the migration speed from
505856 rsec/s to 855756 rsec/s.

Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-16 08:58:27 +01:00
Daniel P. Berrange
4af245dc3e migration: use "" as the default for tls-creds/hostname
The tls-creds parameter has a default value of NULL indicating
that TLS should not be used. Setting it to non-NULL enables
use of TLS. Once tls-creds are set to a non-NULL value via the
monitor, it isn't possible to set them back to NULL again, due
to current implementation limitations. The empty string is not
a valid QObject identifier, so this switches to use "" as the
default, indicating that TLS will not be used

The tls-hostname parameter has a default value of NULL indicating
the the hostname from the migrate connection URI should be used.
Again, once tls-hostname is set non-NULL, to override the default
hostname for x509 cert validation, it isn't possible to reset it
back to NULL via the monitor. The empty string is not a valid
hostname, so this switches to use "" as the default, indicating
that the migrate URI hostname should be used.

Using "" as the default for both, also means that the monitor
commands "info migrate_parameters" / "query-migrate-parameters"
will report existance of tls-creds/tls-parameters even when set
to their default values.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-16 08:57:08 +01:00
Chao Fan
1ffb5dfd35 Change the method to calculate dirty-pages-rate
In function cpu_physical_memory_sync_dirty_bitmap, file
include/exec/ram_addr.h:

if (src[idx][offset]) {
    unsigned long bits = atomic_xchg(&src[idx][offset], 0);
    unsigned long new_dirty;
    new_dirty = ~dest[k];
    dest[k] |= bits;
    new_dirty &= bits;
    num_dirty += ctpopl(new_dirty);
}

After these codes executed, only the pages not dirtied in bitmap(dest),
but dirtied in dirty_memory[DIRTY_MEMORY_MIGRATION] will be calculated.
For example:
When ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] = 0b00001111,
and atomic_rcu_read(&migration_bitmap_rcu)->bmap = 0b00000011,
the new_dirty will be 0b00001100, and this function will return 2 but not
4 which is expected.
the dirty pages in dirty_memory[DIRTY_MEMORY_MIGRATION] are all new,
so these should be calculated also.

Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-16 08:55:56 +01:00
Eric Blake
7d66b1fbd2 migration: Document handling of bdrv_is_allocated() errors
Migration is the only code left in the tree that does not react
to bdrv_is_allocated() failures.  But as there is no useful way
to react to the failure, and we are merely skipping unallocated
sectors on success, just document that our choice of handling
is intended.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-03-13 12:49:33 +01:00
Peter Maydell
251501a371 Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
 Paolo's header update and will disappear if applied after it.
 
 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYtW9KAAoJEAUWMx68W/3nF/MQAIaMjoCkeVnCZsGCJ2VbJZcZ
 Fb5gMNjnHUKwOeDhGuSBP7FGRMalYM2JNRufSiBZnUowCQMXi3Emjad6pGUiPTr0
 B+L1czjw0FDdskQpE1U/StdruLiYBJ98oktnjlla00f+E9rylY0cMmrHpmqfRwDn
 IXTa4qm77aw47Y2MYku1nce27gjA3JEko6Lg2fB7gTtwYzTi/uRrKa+ilbnTPoEZ
 /ZzK8hcUYiV8oDAOtEmKSG3Azo+6ylzDG4r/ldwEecJPhZxeUk39AhDOoU0mx98N
 OE8oOk2t/0Bo+mS7iOw9gZ8sr9p5L2myQkmoxxLuAXAcD9sHVlcp0eKi5lLYNmUa
 oWnnYo3QeCvqrcZzhvSX0b4rLXoY4GP+qKpQo21eKIPEyq3v6EDhrk10UCTXaiBO
 zxHblLgXSrX6VqYcEJGj2oUR/RjH9ouw3hjI5cDy/d/hRmNLCl8lwvPmVmv3tRer
 6X1gcZSUs6hY/drs2/v6maJ0CqK/bx6/OBfkiUJUEN4Dg1ldgO2r1v8pBLukvM6c
 De2aNRezl821HK487EvRlluUq0nO6L3LkqDTBql4/4Rf4HoTRXxoJ68sB0LBqym5
 PwD/C3mQuvlWg8tKJtaHVtS0ESuSCSroaSk1FB648mSs8nJYYFjstc/XovuePqTl
 6UT2OQbUdWITILoWSlI5
 =PCYv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging

Migration pull

Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
  postcopy: Add extra check for COPY function
  postcopy: Add doc about hugepages and postcopy
  postcopy: Check for userfault+hugepage feature
  postcopy: Update userfaultfd.h header
  postcopy: Allow hugepages
  postcopy: Send whole huge pages
  postcopy: Mask fault addresses to huge page boundary
  postcopy: Load huge pages in one go
  postcopy: Use temporary for placing zero huge pages
  postcopy: Plumb pagesize down into place helpers
  postcopy: Record largest page size
  postcopy: enhance ram_block_discard_range for hugepages
  exec: ram_block_discard_range
  postcopy: Chunk discards for hugepages
  postcopy: Transmit and compare individual page sizes
  postcopy: Transmit ram size summary word
  migration: fix use-after-free of to_dst_file
  migration: Update docs to discourage version bumps
  migration: fix id leak regression
  migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-02 17:39:12 +00:00
Peter Maydell
b9fe31392b Block layer patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJYtd8UAAoJEH8JsnLIjy/WuK0P/i3yi29JOZTEeUIUc+QXHm4b
 iXRj/3uLwLD5IJqfjLeDmOPUfI+w0SAkGTidSlKrS5maypW366ke/+CY8QZtbxiH
 qTazKrXNumhvJuJVXQ0L8bAwDC/r8pPlrvLJ3bfBOK6t6fu//M/nUZP/N92UMX87
 w1xA+PNq1TNZEKC6VwdY50fsrhOxIR1ZoS2rEKseEBuYqTm2q5Q0Y8EXhbReO0LE
 Pb0vAOEmZg6K2Awv4Cg2L8BZlz+tGgUd+3eWV8zzCshHkAc2J/OaxjLCG/KUgXb4
 MbdACnIHOUOGqhLfM9wjrVYJAhM/4F1sR0hDm8uUngFWlWsGwTdhH5bRlfat3QQs
 E4oNt6ORHiEis0l7pXfwHTDC3ChockArxdJlOvmpRm6EUSBs132IJS3TrlKBCr+R
 CBdoC3k1eXC6uHF4KCrsnW2u26D4Ju9V6Yb5h/RqYPJCc+o16BsD31/WOLhH4WTq
 M7A9ZbH4jBDHTO3A5zho0x7AGbVGDVMzKssU9MUOkUuPB+yM2KMg/Kr0kUDhrl0k
 aOdRfCF+OcsiXzM97U3msv0udbHr0/tUtE+/3tL3kcXjEHoaFECUdV8mU9F3KleZ
 5MQP2vNcAZA96zuV1qMhPlDwWBoEwBebDnvM3LuTvkHdbBQZv+6A6XiCw/hXdh6o
 zyUn+/2KKGoPiNv/B6PD
 =g3ew
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Tue 28 Feb 2017 20:35:32 GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (46 commits)
  block: Add Error parameter to bdrv_append()
  block: Add Error parameter to bdrv_set_backing_hd()
  block: Assertions for resize permission
  block: Assertions for write permissions
  block: Pass BdrvChild to bdrv_aligned_preadv/pwritev and copy-on-read
  tests: Remove FIXME comments
  nbd/server: Use real permissions for NBD exports
  migration/block: Use real permissions
  hmp: Request permissions in qemu-io
  commit: Add filter-node-name to block-commit
  mirror: Add filter-node-name to blockdev-mirror
  stream: Use real permissions in streaming block job
  mirror: Use real permissions in mirror/active commit block job
  blockjob: Factor out block_job_remove_all_bdrv()
  block: Allow backing file links in change_parent_backing_link()
  block: BdrvChildRole.attach/detach() callbacks
  block: Fix pending requests check in bdrv_append()
  backup: Use real permissions in backup block job
  commit: Use real permissions for HMP 'commit'
  commit: Use real permissions in commit block job
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-01 23:09:46 +00:00
Kevin Wolf
6f5ef23a3f migration/block: Use real permissions
Request BLK_PERM_CONSISTENT_READ for the source of block migration, and
handle potential permission errors as good as we can in this place
(which is not very good, but it matches the other failure cases).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:47:50 +01:00
Kevin Wolf
d7086422b1 block: Add error parameter to blk_insert_bs()
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:40:36 +01:00
Kevin Wolf
6d0eb64d5c block: Add permissions to blk_new()
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.

The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().

This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:40:36 +01:00
Zhang Chen
daa33c5215 Add a new qmp command to do checkpoint, query xen replication status
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-02-28 11:02:12 -08:00
Zhang Chen
2c9639ecab Add a new qmp command to start/stop replication
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-02-28 11:01:56 -08:00
Dr. David Alan Gilbert
665414ad06 postcopy: Add extra check for COPY function
As an extra sanity check, make sure the region we're registering
can perform UFFDIO_COPY;  the COPY will fail later but this
gives a cleaner failure.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-17-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:24 +00:00
Dr. David Alan Gilbert
7e8cafb713 postcopy: Check for userfault+hugepage feature
We need extra Linux kernel support (~4.11) to support userfaults
on hugetlbfs; check for them.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-15-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:24 +00:00
Dr. David Alan Gilbert
433bd0223c postcopy: Allow hugepages
Allow huge pages in postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-13-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:24 +00:00
Dr. David Alan Gilbert
4c011c37ec postcopy: Send whole huge pages
The RAM save code uses ram_save_host_page to send whole
host pages at a time;  change this to use the host page size associated
with the RAM Block which may be a huge page.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-12-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:24 +00:00
Dr. David Alan Gilbert
332847f075 postcopy: Mask fault addresses to huge page boundary
Currently the fault address received by userfault is rounded to
the host page boundary and a host page is requested from the source.
Use the current RAMBlock page size instead of the general host page
size so that for RAMBlocks backed by huge pages we request the whole
huge page.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-11-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:24 +00:00
Dr. David Alan Gilbert
28abd20014 postcopy: Load huge pages in one go
The existing postcopy RAM load loop already ensures that it
glues together whole host-pages from the target page size chunks sent
over the wire.  Modify the definition of host page that it uses
to be the RAM block page size and thus be huge pages where appropriate.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-10-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
41d84210d4 postcopy: Use temporary for placing zero huge pages
The kernel can't do UFFDIO_ZEROPAGE for huge pages, so we have
to allocate a temporary (always zero) page and use UFFDIO_COPYPAGE
on it.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-9-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
df9ff5e1e3 postcopy: Plumb pagesize down into place helpers
Now we deal with normal size pages and huge pages we need
to tell the place handlers the size we're dealing with
and make sure the temporary page is large enough.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-8-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
67f11b5c23 postcopy: Record largest page size
Record the largest page size in use; we'll need it soon for allocating
temporary buffers.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
d3a5038c46 exec: ram_block_discard_range
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.

Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
29c5917201 postcopy: Chunk discards for hugepages
At the start of the postcopy phase, partially sent huge pages
must be discarded.  The code for dealing with host page sizes larger
than the target page size can be reused for this case.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
ef08fb389f postcopy: Transmit and compare individual page sizes
When using postcopy with hugepages, we require the source
and destination page sizes for any RAMBlock to match; note
that different RAMBlocks in the same VM can have different
page sizes.

Transmit them as part of the RAM information header and
fail if there's a difference.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Dr. David Alan Gilbert
e8ca1db29b postcopy: Transmit ram size summary word
Replace the host page-size in the 'advise' command by a pagesize
summary bitmap; if the VM is just using normal RAM then
this will be exactly the same as before, however if they're using
huge pages they'll be different, and thus:
   a) Migration from/to old qemu's that don't understand huge pages
      will fail early.
   b) Migrations with different size RAMBlocks will also fail early.

This catches it very early; earlier than the detailed per-block
check in the next patch.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Vladimir Sementsov-Ogievskiy
f9c8caa04f migration: fix use-after-free of to_dst_file
hmp_savevm calls qemu_savevm_state(f), which sets to_dst_file=f in
global migration state. Then hmp_savevm closes f (g_free called).

Next access to to_dst_file in migration state (for example,
qmp_migrate_set_speed) will use it after it was freed.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170225193155.447462-5-vsementsov@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:23 +00:00
Marc-André Lureau
128e4e1089 migration: fix id leak regression
This leak was introduced in commit
581f08bac2.

(it stands out quickly with ASAN once the rest of the leaks are also
removed from make check with this series)

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170221141451.28305-31-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:22 +00:00
Ashijeet Acharya
7562f90707 migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.

NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.

Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:22 +00:00
Halil Pasic
07d4e69147 migration/vmstate: fix array of ptr with nullptrs
Make VMS_ARRAY_OF_POINTER cope with null pointers. Previously the
reward for trying to migrate an array with some null pointers in it was
an illegal memory access, that is a swift and painless death of the
process.  Let's make vmstate cope with this scenario.

The general approach is, when we encounter a null pointer (element),
instead of following the pointer to save/load the data behind it, we
save/load a placeholder. This way we can detect if we expected a null
pointer at the load side but not null data was saved instead.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:29:00 +00:00
Halil Pasic
cbfda0e6cf migration/vmstate: split up vmstate_base_addr
Currently vmstate_base_addr does several things: it pinpoints the field
within the struct, possibly allocates memory and possibly does the first
pointer dereference. Obviously allocation is needed only for load.

Let us split up the functionality in vmstate_base_addr and move the
address manipulations (that is everything but the allocation logic) to
load and save so it becomes more obvious what is actually going on. Like
this all the address calculations (and the handling of the flags
controlling these) is in one place and the sequence is more obvious.

The newly introduced function vmstate_handle_alloc also fixes the
allocation for the unused VMS_VBUFFER|VMS_MULTIPLY|VMS_ALLOC scenario
and is substantially simpler than the original vmstate_base_addr.

In load and save some asserts are added so it's easier to debug
situations where we would end up with a null pointer dereference.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:29:00 +00:00
Halil Pasic
e84641f73d migration/vmstate: renames in (load|save)_state
The vmstate_(load|save)_state start out with an a void *opaque pointing
to some struct, and manipulate one or more elements of one field within
that struct.

First the field within the struct is pinpointed as opaque + offset, then
if this is a pointer the pointer is dereferenced to obtain a pointer to
the first element of the vmstate field. Pointers to further elements if
any are calculated as first_element + i * element_size (where i is the
zero based index of the element in question).

Currently base_addr and addr is used as a variable name for the pointer
to the first element and the pointer to the current element being
processed. This is suboptimal because base_addr is somewhat
counter-intuitive (because obtained as base + offset) and both base_addr
and addr not very descriptive (that we have a pointer should be clear
from the fact that it is declared as a pointer).

Let make things easier to understand by renaming base_addr to first_elem
and addr to curr_elem. This has the additional benefit of harmonizing
with other names within the scope (n_elems, vmstate_n_elems).

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:29:00 +00:00
Daniel Henrique Barboza
87c9cc1c30 Changing error message of QMP 'migrate_set_downtime' to seconds
Using QMP, the error message of 'migrate_set_downtime' was displaying
the values in milliseconds, being misleading with the command that
accepts the value in seconds:

{ "execute": "migrate_set_downtime", "arguments": {"value": 3000}}
{"error": {"class": "GenericError", "desc": "Parameter 'downtime_limit'
expects an integer in the range of 0 to 2000000 milliseconds"}}

This message is also seen in HMP when trying to set the same
parameter:

(qemu) migrate_set_parameter downtime-limit 3000000
Parameter 'downtime_limit' expects an integer in the range of 0 to
2000000 milliseconds

To allow for a proper error message when using QMP, a validation
of the user input was added in 'qmp_migrate_set_downtime'.

Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-Id: <20170222151729.5812-1-danielhb@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:29:00 +00:00
Dr. David Alan Gilbert
bcf4513129 migration: Add VMSTATE_WITH_TMP
VMSTATE_WITH_TMP is for handling structures where some calculation
or rearrangement of the data needs to be performed before the data
hits the wire.
For example,  where the value on the wire is an offset from a
non-migrated base, but the data in the structure is the actual pointer.

To use it, a temporary type is created and a vmsd used on that type.
The first element of the type must be 'parent' a pointer back to the
type of the main structure.  VMSTATE_WITH_TMP takes care of allocating
and freeing the temporary before running the child vmsd.

The post_load/pre_save on the child vmsd can copy things from the parent
to the temporary using the parent pointer and do any other calculations
needed; it can then use normal VMSD entries to do the actual data
storage without having to fiddle around with qemu_get_*/qemu_put_*

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170203160651.19917-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:14 +00:00
zhanghailiang
a8664ba510 COLO: Don't process failover request while loading VM's state
We should not do failover work while the main thread is loading
VM's state. Otherwise the consistent of VM's memory and
device state will be broken.

We will restart the loading process after jump over the stage,
The new failover status 'RELAUNCH' will help to record if we
need to restart the process.

Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
   Added a missing '(Since 2.9)'
2017-02-13 17:27:13 +00:00
zhanghailiang
c937b9a6db COLO: Shutdown related socket fd while do failover
If the net connection between primary host and secondary host breaks
while COLO/COLO incoming threads are doing read() or write().
It will block until connection is timeout, and the failover process
will be blocked because of it.

So it is necessary to shutdown all the socket fds used by COLO
to avoid this situation. Besides, we should close the corresponding
file descriptors after failvoer BH shutdown them,
Or there will be an error.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
zhanghailiang
479125d53e COLO: fix setting checkpoint-delay not working properly
If we set checkpoint-delay through command 'migrate-set-parameters',
It will not take effect until we finish last sleep chekpoint-delay,
That's will be offensive espeically when we want to change its value
from an extreme big one to a proper value.

Fix it by using timer to realize checkpoint-delay.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1484657864-21708-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
Halil Pasic
59046ec29a migration: consolidate VMStateField.start
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.

The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.

Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
Ashijeet Acharya
0827b9e97d migrate: Introduce zero RAM checks to skip RAM migration
Migration of a "none" machine with no RAM crashes abruptly as
bitmap_new() fails and thus aborts. Instead place zero RAM checks at
appropriate places to skip migration of RAM in this case and complete
migration successfully for devices only.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1486564125-31366-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
Pavel Butsykin
ced1c6166e migration: discard non-dirty ram pages after the start of postcopy
After the start of postcopy migration there are some non-dirty pages which have
already been migrated. These pages are no longer needed on the source vm so that
we can free them and it doen't hurt to complete the migration.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-4-pbutsykin@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
Pavel Butsykin
53f09a1076 add 'release-ram' migrate capability
This feature frees the migrated memory on the source during postcopy-ram
migration. In the second step of postcopy-ram migration when the source vm
is put on pause we can free unnecessary memory. It will allow, in particular,
to start relaxing the memory stress on the source host in a load-balancing
scenario.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-3-pbutsykin@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
   Manually merged in Pavel's 'migration: madvise error_report fixup!'
2017-02-13 17:27:13 +00:00
Pavel Butsykin
9eb1476610 migration: add MigrationState arg for ram_save_/compressed_/page()
Cosmetic patch. The use of ms variable instead of migrate_get_current()
looks nicer, especially when there reuse.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-2-pbutsykin@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
Dr. David Alan Gilbert
ef8d6488d2 postcopy: Recover block devices on early failure
An early postcopy failure can be recovered from as long as we know
we haven't sent the command to run the destination.
We have to undo the bdrv_inactivate_all by calling
bdrv_invalidate_cache_all

Note that I'm not using ms->block_inactive because once we've
sent the postcopy package we dont want anything else to try
and recover the block storage on the source; the destination
might have started writing to it.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06 13:36:49 +01:00
Dr. David Alan Gilbert
328d4d8528 Postcopy: Reset state to avoid cleanup assert
On a destination host with no userfault support an incoming
postcopy would cause the state to enter ADVISE before
it realised there was no support, and because it was in ADVISE
state it would perform a cleanup at the end.  Since there
was no support the cleanup function should be unreachable,
but ends up being called and asserting.

Reset the state when we realise we have no support, thus the
cleanup doesn't happen.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06 13:36:49 +01:00
Dr. David Alan Gilbert
581f08bac2 migration: Check for ID length
The qdev id of a device can be huge if it's on the end of a chain
of bridges; in reality such chains shouldn't occur but they can
be made to by chaining PCIe bridges together.

The migration format has a number of 256 character long format
limits; check we don't hit them (we already use pstrcat/cpy but
that just protects us from buffer overruns, we fairly quickly
hit an assert).

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06 13:36:49 +01:00
Dr. David Alan Gilbert
bc5c4f2196 vmstate_register_with_alias_id: Take an Error **
I'll be adding an error to it in a subsequent patch.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06 13:36:49 +01:00
Juan Quintela
b4b076daf3 migration: create Migration Incoming State at init time
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1485207141-1941-3-git-send-email-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06 13:36:49 +01:00
Stefan Hajnoczi
7f4076c1bb trace: clean up trace-events files
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds.  The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31 17:12:15 +00:00
Pavel Dovgalyuk
ac8c19ba74 savevm: add public save_vmstate function
This patch introduces save_vmstate function to allow saving and loading
vmstates from the replay module.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071741.4572.13714.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:30 +01:00
Dr. David Alan Gilbert
46a02a7451 migration/tracing: Add tracing on save
Add some tracing to vmstate_subsection_save and vmstate_save_state
to help in debugging when you're not sure if a conditional piece
of data is being saved.

In vmstate_subsection_save I renamed the inner vmsd to avoid the aliasing
and be able to print both names.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161212125838.14425-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 18:00:32 +00:00
Juan Quintela
55c4446b8b migration: transform remaining DPRINTF into trace_
So we can remove DPRINTF() macro

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1485207141-1941-2-git-send-email-quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed up 'remained/remaining' as requested by Eric
2017-01-24 18:00:31 +00:00
Pankaj Gupta
009fad7f4c migration: Change name of live migration thread
Change the name of live migration thread from 'migration'
to 'live_migration' to identify it clearly. 'migration'
is a generic word and kernel also has  tasks for process
migration with the name 'migration/cpu#'.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <1485178976-15225-1-git-send-email-pagupta@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 18:00:31 +00:00
zhanghailiang
1d2acc3162 migration: re-active images while migration been canceled after inactive them
commit fe904ea824 fixed a case
which migration aborted QEMU because it didn't regain the control
of images while some errors happened.

Actually, there are another two cases can trigger the same error reports:
" bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed",

Case 1, codes path:
migration_thread()
    migration_completion()
        bdrv_inactivate_all() ----------------> inactivate images
        qemu_savevm_state_complete_precopy()
            socket_writev_buffer() --------> error because destination fails
                qemu_fflush() ----------------> set error on migration stream
-> qmp_migrate_cancel() ----------------> user cancelled migration concurrently
    -> migrate_set_state() ------------------> set migrate CANCELLIN
    migration_completion() -----------------> go on to fail_invalidate
	if (s->state == MIGRATION_STATUS_ACTIVE) -> Jump this branch

Case 2, codes path:
migration_thread()
    migration_completion()
        bdrv_inactivate_all() ----------------> inactivate images
    migreation_completion() finished
-> qmp_migrate_cancel() ---------------> user cancelled migration concurrently
    qemu_mutex_lock_iothread();
    qemu_bh_schedule (s->cleanup_bh);

As we can see from above, qmp_migrate_cancel can slip in whenever
migration_thread does not hold the global lock. If this happens after
bdrv_inactive_all() been called, the above error reports will appear.

To prevent this, we can call bdrv_invalidate_cache_all() in qmp_migrate_cancel()
directly if we find images become inactive.

Besides, bdrv_invalidate_cache_all() in migration_completion() doesn't have the
protection of big lock, fix it by add the missing qemu_mutex_lock_iothread();

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1485244792-11248-1-git-send-email-zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 18:00:31 +00:00
Ashijeet Acharya
b67b8c3a9d migration: Fail migration blocker for --only-migratable
migrate_add_blocker should rightly fail if the '--only-migratable'
option was specified and the device in use should not be able to
perform the action which results in an unmigratable VM.

Make migrate_add_blocker return -EACCES in this case.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-6-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 18:00:31 +00:00
Ashijeet Acharya
fe44dc9180 migration: disallow migrate_add_blocker during migration
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.

Add an errp parameter and a retcode return value to migrate_add_blocker.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Merged with recent 'Allow invtsc migration' change
2017-01-24 18:00:30 +00:00
Jianjun Duan
cde7ee5974 migration: add error_report
Added error_report where version_ids do not match in vmstate_load_state.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-5-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Jianjun Duan
94869d5c52 migration: migrate QTAILQ
Currently we cannot directly transfer a QTAILQ instance because of the
limitation in the migration code. Here we introduce an approach to
transfer such structures. We created VMStateInfo vmstate_info_qtailq
for QTAILQ. Similar VMStateInfo can be created for other data structures
such as list.

When a QTAILQ is migrated from source to target, it is appended to the
corresponding QTAILQ structure, which is assumed to have been properly
initialized.

This approach will be used to transfer pending_events and ccs_list in spapr
state.

We also create some macros in qemu/queue.h to access a QTAILQ using pointer
arithmetic. This ensures that we do not depend on the implementation
details about QTAILQ in the migration code.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-3-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Jianjun Duan
2c21ee769e migration: extend VMStateInfo
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Daniel P. Berrange
60e705c51c io: change the QIOTask callback signature
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23 15:32:18 +00:00
Paolo Bonzini
a15215f3e1 build: remove --enable-colo/--disable-colo
No need to provide this knob, so remove it and stubs/migration-colo.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Peter Xu
f37bc03623 migration: allow to prioritize save state entries
During migration, save state entries are saved/loaded without a specific
order - we just traverse the savevm_state.handlers list and do it one by
one. This might not be enough.

There are requirements that we need to load specific device's vmstate
first before others. For example, VT-d IOMMU contains DMA address
remapping information, which is required by all the PCI devices to do
address translations. We need to make sure IOMMU's device state is
loaded before the rest of the PCI devices, so that DMA address
translation can work properly.

This patch provide a VMStateDescription.priority value to allow specify
the priority of the saved states. The loadvm operation will be done with
those devices with higher vmsd priority.

Before this patch, we are possibly achieving the ordering requirement by
an assumption that the ordering will be the same with the ordering that
objects are created. A better way is to mark it out explicitly in the
VMStateDescription table, like what this patch does.

Current ordering logic is still naive and slow, but after all that's not
a critical path so IMO it's a workable solution for now.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-10 05:56:57 +02:00
Thomas Huth
5c90308f07 migration: Fix return code of ram_save_iterate()
qemu_savevm_state_iterate() expects the iterators to return 1
when they are done, and 0 if there is still something left to do.
However, ram_save_iterate() does not obey this rule and returns
the number of saved pages instead. This causes a fatal hang with
ppc64 guests when you run QEMU like this (also works with TCG):

 qemu-img create -f qcow2  /tmp/test.qcow2 1M
 qemu-system-ppc64 -nographic -nodefaults -m 256 \
                   -hda /tmp/test.qcow2 -serial mon:stdio

... then switch to the monitor by pressing CTRL-a c and try to
save a snapshot with "savevm test1" for example.

After the first iteration, ram_save_iterate() always returns 0 here,
so that qemu_savevm_state_iterate() hangs in an endless loop and you
can only "kill -9" the QEMU process.
Fix it by using proper return values in ram_save_iterate().

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-11-14 19:35:41 +01:00
zhanghailiang
fe39a4d440 migration: fix missing assignment for has_x_checkpoint_delay
We forgot to assign true to params->has_x_checkpoint_delay parameter
in qmp_query_migrate_parameters.

Without this, qmp command 'query-migrate-parameters' doesn't show the
default value for x-checkpoint-delay option.

This also fixes the fact that HMP was relying on unspecified behavior by
reading x_checkpoint_delay without checking has_x_checkpoint_delay.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-11-14 14:50:56 +01:00
Jeff Cody
02ba9265e8 migration: fix compiler warning on uninitialized variable
Some older GCC versions (e.g. 4.4.7) report a warning on an
uninitialized variable for 'request', even though all possible code
paths that reference 'request' will be initialized.   To appease
these versions, initialize the variable to 0.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 259818682e41b95ae60f1423b87954a3fe377639.1477950393.git.jcody@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-11-01 09:31:53 +00:00
Peter Maydell
eab9e9629c Migration bits from the COLO project
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQItBAABCAAXBQJYFc37EBxhbWl0QGtlcm5lbC5vcmcACgkQ6wtN/GV+9nDdqQ/9
 H+di+q/zF6aOEuXRCN0ud9R81fZ7nLve3e9EbKCNZXnxN3M3+zQj0At+e/SBEoTc
 rRwqJmNlRX3TWViWsAYmddgtopZ9R9DWwW/VsKjS2Ng230YShrA/o20hu2dJkwl3
 CN4vAObzc/gxM59NWUlMnTXOG+Z9fI1NlEf0vZ2484a59KPVIE7W1zZccT1F8MNq
 sfa3RlOGBchNO2Rfzrr6cFGGH7UTfWiftPs7EDOfN/YBcpld6V4DfPWdPP8r2DSX
 gG7D3DJuuqPxZCjl0Nm1OjaIunYfVrRpMPMeNyo1+kTVbvvhDPFjah/MSWu8XJ2c
 N5lSqikIAWfMbQVW9gDpQ0495eRQTWA7VIlCbwN6mqNxyBvQMA+licFq6UFFrCMp
 quC3gO+daz3fKvUhi23TpebbqKLHA5OZA5ZvkjGDgkKPMCJyQRBZHLb81t5xsulZ
 cXuzAOeRcXK9aEJvcrDgWwxzi3PN8zg74RF1ZV8gxM4DkHKohlsnbgshWqGkFh3M
 +S5tEPqVlOlDO9juf6rlwNnVbWhFDFEGMKjI9XMTWwVWTREbqyP86fP66h2C4qc6
 34yAHi5G2i43dxzHgpHC0MpU0XenO0EYdu+8Tcx35LSBSfkOeD7pU1DeZQgbI51m
 ZQSnLDJqv2HVdoZT7vaIjwuhtEl84xqelFdVg+cY7Gw=
 =sur7
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' into staging

Migration bits from the COLO project

# gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit-migration/tags/migration-for-2.8:
  MAINTAINERS: Add maintainer for COLO framework related files
  configure: Support enable/disable COLO feature
  docs: Add documentation for COLO feature
  COLO: Implement failover work for secondary VM
  COLO: Implement the process of failover for primary VM
  COLO: Introduce state to record failover process
  COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
  COLO: Synchronize PVM's state to SVM periodically
  COLO: Add checkpoint-delay parameter for migrate-set-parameters
  COLO: Load VMState into QIOChannelBuffer before restore it
  COLO: Send PVM state to secondary side when do checkpoint
  COLO: Add a new RunState RUN_STATE_COLO
  COLO: Introduce checkpointing protocol
  COLO: Establish a new communicating path for COLO
  migration: Switch to COLO process after finishing loadvm
  migration: Enter into COLO mode after migration if COLO is enabled
  COLO: migrate COLO related info to secondary node
  migration: Introduce capability 'x-colo' to migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31 13:06:38 +00:00
Peter Maydell
277d44f5a6 trivial patches for 2016-10-28
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJYE2wfAAoJEHAbT2saaT5ZGYUH/3QWJ4OFWbqGo1YYN5AIAheF
 v1bQGTh1HGbLk46ajhUvzB0bMHb1FC1KoOruU2wFYuKK/J5zQ+4X9EmaC/fD7hyx
 nGTcPWAyxKOlqOq3In9ro+xWQNzEhfoypKCQQVC4Y3quzub48wAro8fuFSNXLyBq
 ERvAsjgj0TrLEHoWtJl2bPYiqSd6KAHZAKPFW3Jw8MmsBcTLmnF2PVW3LBfdcHe7
 6vlhqX7lPzVlHRaUsaxRkFxYd2YGisbe3bPRDw2fTxrtOYyEkopQq7xi2Q6Yq5N0
 z0yM2oJ7o1QtUOXYa7KBf03WZ7e119HimaUkGLg+0LVhQNbeG3hd3gNwApXa5og=
 =tYml
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2016-10-28

# gpg: Signature made Fri 28 Oct 2016 16:17:51 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (23 commits)
  Fix build for less common build directories names
  clean-up: removed duplicate #includes
  scripts/clean-includes: added duplicate #include check
  monitor: deprecate 'default' option
  qemu-ga: Remove stray 'q' in documentation
  Makefile: Fix help text for target 'installer'
  s390: avoid always-true comparison in s390_pci_generate_fid()
  migration: Remove unneeded NULL check from migrate_fd_error()
  scripts/hxtool: fix undefined behavour of echo
  qemu-options.hx: set: fix copy-paste error
  usb: Change *_exitfn return type from int to void
  MAINTAINERS: qemu-trivial information
  colo-compare: remove unused struct CompareChardevProps and 'props' variable
  milkymist-pfpu: fix potential integer overflow
  hw/block/nvme: Simplify if-statements a little bit
  target-lm32: rewrite gen_compare()
  lm32: milkymist-tmu2: fix integer overflow
  target-lm32: disable asm logging via LOG_DIS()
  target-lm32: swap operand of wcsr in LOG_DIS()
  target-lm32: fix LOG_DIS operand order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31 11:58:30 +00:00
zhanghailiang
180fb75000 configure: Support enable/disable COLO feature
configure --enable-colo/--disable-colo to switch COLO
support on/off.

COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
9d2db3760b COLO: Implement failover work for secondary VM
If users require SVM to takeover work, COLO incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
b3f7f0c5e6 COLO: Implement the process of failover for primary VM
For primary side, if COLO gets failover request from users.
To be exact, gets 'x_colo_lost_heartbeat' command.
COLO thread will exit the loop while the failover BH does the
cleanup work and resumes VM.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
aef060850b COLO: Introduce state to record failover process
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.

We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
d89e666e06 COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.

For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
18cc23d72c COLO: Synchronize PVM's state to SVM periodically
Do checkpoint periodically, the default interval is 200ms.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
68b5359187 COLO: Add checkpoint-delay parameter for migrate-set-parameters
Add checkpoint-delay parameter for migrate-set-parameters, so that
we can control the checkpoint frequency when COLO is in periodic mode.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
4291d372e2 COLO: Load VMState into QIOChannelBuffer before restore it
We should not destroy the state of SVM (Secondary VM) until we receive
the complete data of PVM's state, in case the primary fails in the process
of sending the state, so we cache the VM's state in secondary side before
load it into SVM.

Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
a91246c95f COLO: Send PVM state to secondary side when do checkpoint
VM checkpointing is to synchronize the state of PVM to SVM, just
like migration does, we re-use save helpers to achieve migrating
PVM's state to Secondary side.

COLO need to cache the data of VM's state in the secondary side before
synchronize it to SVM. COLO need the size of the data to determine
how much data should be read in the secondary side.
So here, we can get the size of the data by saving it into I/O channel
before send it to the secondary side.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
4f97558e10 COLO: Introduce checkpointing protocol
We need communications protocol of user-defined to control
the checkpointing process.

The new checkpointing request is started by Primary VM,
and the interactive process like below:

Checkpoint synchronizing points:

                   Primary               Secondary
                                            initial work
'checkpoint-ready'    <-------------------- @

'checkpoint-request'  @ -------------------->
                                            Suspend (Only in hybrid mode)
'checkpoint-reply'    <-------------------- @
                      Suspend&Save state
'vmstate-send'        @ -------------------->
                      Send state            Receive state
'vmstate-received'    <-------------------- @
                      Release packets       Load state
'vmstate-load'        <-------------------- @
                      Resume                Resume (Only in hybrid mode)

                      Start Comparing (Only in hybrid mode)
NOTE:
 1) '@' who sends the message
 2) Every sync-point is synchronized by two sides with only
    one handshake(single direction) for low-latency.
    If more strict synchronization is required, a opposite direction
    sync-point should be added.
 3) Since sync-points are single direction, the remote side may
    go forward a lot when this side just receives the sync-point.
 4) For now, we only support 'periodic' checkpoint, for which
   the Secondary VM is not running, later we will support 'hybrid' mode.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
56ba83d2a8 COLO: Establish a new communicating path for COLO
This new communication path will be used for returning messages
from Secondary side to Primary side.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
25d0c16f62 migration: Switch to COLO process after finishing loadvm
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.

We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
0b827d5e72 migration: Enter into COLO mode after migration if COLO is enabled
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.

We reuse migration thread, so the process of checkpointing will be handled
in migration thread.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
5821ebf93b COLO: migrate COLO related info to secondary node
We can determine whether or not VM in destination should go into COLO mode
by referring to the info that was migrated.

We skip this section if COLO is not enabled (i.e.
migrate_set_capability colo off), so that, It doesn't break compatibility
with migration no matter whether users configure the --enable-colo/disable-colo
on the source/destination side or not;

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang
35a6ed4f71 migration: Introduce capability 'x-colo' to migration
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.

The default value for COLO (COarse-Grain LOck Stepping) is disabled.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
Peter Maydell
25174055f4 migration: Remove unneeded NULL check from migrate_fd_error()
All the callers of migrate_fd_error() pass a non-NULL
error parameter, and if any did pass NULL then we would
segfault in error_copy(), so remove the unnecessary
NULL check earlier in the function.
(Spotted by Coverity.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28 18:17:23 +03:00
Peter Maydell
01b601f061 Merge qio 2016/10/27 v1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYEfjrAAoJEL6G67QVEE/fdU4P/i7yBJo436OpkdgeWS8AWuFr
 ptZ+Fj/weGka5GU9E3KQu36kbSgrtfcgwTHphCMXnZ0YCeKQDuM57f7LNiN6qheB
 nqgJvJioLbUvLTQvCHOISM7bWOnYvASBmYtLJFtUcP/jhdOy61KaADnJ+7MbliNv
 yJSW2RN+s/y9nUb+dxEpIXXUVMRa6BX+wHW3O44c1oLn6/Pe20aJeHTyDx3qiBhD
 8RYXUgRZopH2bouBSzXgMQTbn/QMD/dC81WQlHKlt4swffyei2D/1pciOcuc0SXz
 +SZdkTre5JB5Kd6DU8zQ6PrrIt1nPmLSptSyhQvNxm+uWNWHnFcW1s2aYmf/ikjl
 4boW37ayJx09mns8yv7TerzEPbL5qJvVX8Dsnb6telkvrS9hy9S1xuIB5xHbt6/h
 vwFmCdwaZoGpDDaoXRL+9k9TOI9BbEMKX33nAPDqvEXLMIf+og4fmweTKcY4XTRL
 /Fdg1H71v8Ayv+r5TJOKwFg3PNNjnvqkbk1psS+aaW7dup43iaYGIKWy+VFaCufk
 hPXLOtR5lUsYC2qm+nkjPIgoP7D8oZx4AGkCHbYsqzi+l1lynZH3rBIs8ggLr72o
 FFk4g0sNYe1ccAa89jFEgWIQbS0N6ckUXCv12g3eyF/UIC1F35/mGGugSRnTXuc2
 a/WsvgU7pGBrtqXcg7lF
 =gsxL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging

Merge qio 2016/10/27 v1

# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/pull-qio-2016-10-27-1:
  main: set names for main loop sources created
  vnc: set name for all I/O channels created
  migration: set name for all I/O channels created
  char: set name for all I/O channels created
  nbd: set name for all I/O channels created
  io: add ability to set a name for IO channels
  io: Add a QIOChannelSocket cleanup test
  io: set LISTEN flag explicitly for listen sockets
  io: Introduce a qio_channel_set_feature() helper
  io: Use qio_channel_has_feature() where applicable
  io: Fix double shift usages on QIOChannel features

Conflicts:
	qemu-char.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28 15:30:55 +01:00
Daniel P. Berrange
6f01f136af migration: set name for all I/O channels created
Ensure that all I/O channels created for migration are given names
to distinguish their respective roles.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-27 09:13:10 +02:00
Peter Maydell
59811a320d migration/savevm.c: migrate non-default page size
Add a subsection to vmstate_configuration which is present
only if the guest is using a target page size which is
different from the default. This allows us to helpfully
diagnose attempts to migrate between machines which
are using different target page sizes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-24 16:26:50 +01:00
Vijaya Kumar K
adb65dec4b migration: Remove static allocation of xzblre cache buffer
Allocate xzblre zero page cache buffer dynamically.
Remove dependency on TARGET_PAGE_SIZE to make run-time
page size detection for arm platforms.

Signed-off-by: Vijaya Kumar K <vijayak@cavium.com>
Message-id: 1465808915-4887-2-git-send-email-vijayak@caviumnetworks.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24 16:26:49 +01:00
Ashijeet Acharya
2ff3025797 migrate: move max-bandwidth and downtime-limit to migrate_set_parameter
Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as
deprecated.
Move max-bandwidth and downtime-limit into migrate-set-parameters for
setting maximum migration speed and expected downtime limit parameters
respectively.
Change downtime units to milliseconds (only for new-command) and set
its upper bound limit to 2000 seconds.
Update the query part in both hmp and qmp qemu control interfaces.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Dr. David Alan Gilbert
9308ae5485 migration: Fix seg with missing port
The command :
   migrate tcp:localhost:

   currently segs; fix it so it now says:

   error parsing address 'localhost:'

and the same for -incoming.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Dr. David Alan Gilbert
5cf0f48d2a migration/postcopy: Explicitly disallow huge pages
At the moment postcopy will fail as soon as qemu tries to register
userfault on the RAMBlock pages that are backed by hugepages.
However, the kernel is going to get userfault support for hugepage
at some point, and we've not got the rest of the QEMU code to support
it yet, so fail neatly with an error like:

Postcopy doesn't support hugetlbfs yet (/objects/mem1)

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Dr. David Alan Gilbert
2ebeaec012 Postcopy vs xbzrle: Don't send xbzrle pages once in postcopy [for 2.8]
xbzrle relies on reading pages that have already been sent
to the destination and then applying the modifications; we can't
do that in postcopy because the destination may well have
modified the page already or the page has been discarded.

I already didn't allow reception of xbzrle pages, but I
forgot to add the test to stop them being sent.

Enabling both xbzrle and postcopy can make some sense;
if you think that your migration might finish if you
have xbzrle, then when it doesn't complete you flick
over to postcopy and stop xbzrle'ing.

This corresponds to RH bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1368422

Symptom is:

Unknown combination of migration flags: 0x60 (postcopy mode)
(either 0x60 or 0x40)

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Ashijeet Acharya
091ecc8b69 migrate: Fix bounds check for migration parameters in migration.c
This patch fixes the out-of-bounds check of migration parameters in
qmp_migrate_set_parameters() for cpu-throttle-initial and
cpu-throttle-increment by adding a return statement for both as they
were broken since their introduction in 2.5 via commit 1626fee.
Due to the missing return statements, parameters were getting set to
out-of-bounds values despite the error.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Eric Blake
7f375e0446 migrate: Use boxed qapi for migrate-set-parameters
Now that QAPI makes it easy to pass a struct around, we don't
have to declare as many parameters or local variables.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Eric Blake
de63ab6124 migrate: Share common MigrationParameters struct
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional.  We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands.  The next patch can then reduce the amount of
code needed on input.

Also, we made a mistake in qemu 2.7 of returning an empty
string during 'query-migrate-parameters' when there is no
TLS, rather than omitting TLS details entirely.  Technically,
this change risks breaking any 2.7 client that is hard-coded
to expect the parameter's existence; on the other hand, clients
that are portable to 2.6 already must be prepared for those
members to not be present.

And this gets rid of yet one more place where the QMP output
visitor is silently converting a NULL string into "" (which
is a hack I ultimately want to kill off).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:23:53 +02:00
Dr. David Alan Gilbert
cd5ea07064 migration/rdma: Don't flag an error when we've been told about one
If the other side tells us there's been an error and we fail
the migration, we don't need to signal that failure to the other
side because it already knew.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <michael@hinespot.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:22:38 +02:00
Dr. David Alan Gilbert
ccb783c312 migration: Make failed migration load set file error
If an error occurs in a section load, set the file error flag
so that the transport can get notified to do a cleanup.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <michael@hinespot.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:22:38 +02:00
Dr. David Alan Gilbert
12c67ffb1f migration/rdma: Pass qemu_file errors across link
If we fail for some reason (e.g. a mismatched RAMBlock)
and it's set the qemu_file error flag, pass that error back to the
peer so it can clean up rather than waiting for some higher level
progress.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <michael@hinespot.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:22:38 +02:00
Dr. David Alan Gilbert
49228e17ed migration: Report values for comparisons
Report the values when a comparison fails; together with
the previous patch that prints the device and field names
this should give a good idea of why loading the migration failed.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:22:38 +02:00
Dr. David Alan Gilbert
a1771070e7 migration: report an error giving the failed field
When a field fails to load (typically due to a limit
check, or a call to a get/put) report the device and field
to give an indication of the cause.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13 17:22:38 +02:00
Paolo Bonzini
9c1f8f4493 migration: sync all address spaces
Migrating a VM during reboot sometimes results in differences
between the source and destination in the SMRAM area.

This is because migration_bitmap_sync() only fetches from KVM
the dirty log of address_space_memory.  SMRAM memory slots
are ignored and the modifications to SMRAM are not sent to the
destination.

Reported-by: He Rongguang <herongguang.he@huawei.com>
Reviewed-by: He Rongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27 11:57:29 +02:00
Richard Henderson
a1febc4950 cutils: Export only buffer_is_zero
Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:45 +02:00
Laurent Vivier
e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Cao jin
474c624ddf migration/socket: fix typo in file header
Code of inet socket & unix socket is merged together.
Also add some newlines, make code block well separated.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>

Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469696074-12744-4-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11 17:03:51 +05:30
Liang Li
787d134fb1 migration: fix live migration failure with compression
Because of commit 11808bb0c4, which remove some condition checks
of 'f->ops->writev_buffer', 'qemu_put_qemu_file' should be enhanced
to clear the 'f_src->iovcnt', or 'f_src->iovcnt' may exceed the
MAX_IOV_SIZE which will break live migration. This should be fixed.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Jinshi Zhang <jinshi.c.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1470702146-24399-1-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11 16:59:53 +05:30
Evgeny Yakovlev
0e8b3cdfbc migration: mmap error check fix
mmap man page:
"On success, mmap() returns a pointer to the mapped area. On error, the
value MAP_FAILED (that is, (void *) -1) is returned, and errno  is  set
to indicate the cause of the error."

The check in postcopy_get_tmp_page is definitely wrong and should be
fixed.

Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1469785705-16670-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11 16:59:38 +05:30
Cao jin
e110aa919a migration/ram: fix typo
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469776231-23820-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-08-11 16:59:33 +05:30
Marc-André Lureau
df37dd6ffe qjson: free str
Release the qstring allocated in qjson_new().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-08-08 00:00:24 +04:00
Dr. David Alan Gilbert
42da5550d6 migration: set state to post-migrate on failure
If a migration fails/is cancelled during the postcopy stage we currently
end up with the runstate as finish-migrate, where it should be post-migrate.
There's a small window in precopy where I think the same thing can
happen, but I've never seen it.

It rarely matters; the only postcopy case is if you restart a migration, which
again is a case that rarely matters in postcopy because it's only
safe to restart the migration if you know the destination hasn't
been running (which you might if you started the destination with -S
and hadn't got around to 'c' ing it before the postcopy failed).
Even then it's a small window but potentially you could hit if
there's a problem loading the devices on the destination.

This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1355683

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1468601086-32117-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-22 13:23:09 +05:30
Lin Ma
0c204cc810 hmp: show all of snapshot info on every block dev in output of 'info snapshots'
Currently, the output of 'info snapshots' shows fully available snapshots.
It's opaque, hides some snapshot information to users. It's not convenient
if users want to know more about all of snapshot information on every block
device via monitor.

Follow Kevin's and Max's proposals, The patch makes the output more detailed:
(qemu) info snapshots
List of snapshots present on all disks:
 ID        TAG                 VM SIZE                DATE       VM CLOCK
 --        checkpoint-1           165M 2016-05-22 16:58:07   00:02:06.813

List of partial (non-loadable) snapshots on 'drive_image1':
 ID        TAG                 VM SIZE                DATE       VM CLOCK
 1         snap1                     0 2016-05-22 16:57:31   00:01:30.567

Signed-off-by: Lin Ma <lma@suse.com>
Message-id: 1467869164-26688-3-git-send-email-lma@suse.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13 13:41:39 +02:00
Lin Ma
3a1ee71190 hmp: use snapshot name to determine whether a snapshot is 'fully available'
Currently qemu uses snapshot id to determine whether a snapshot is fully
available, It causes incorrect output in some scenario.

For instance:
(qemu) info block
drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2
(qcow2)
    Cache mode:       writeback

drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2
(qcow2)
    Cache mode:       writeback
(qemu)
(qemu) info snapshots
There is no snapshot available.
(qemu)
(qemu) snapshot_blkdev_internal drive_image1 snap1
(qemu)
(qemu) info snapshots
There is no suitable snapshot available
(qemu)
(qemu) savevm checkpoint-1
(qemu)
(qemu) info snapshots
ID        TAG                 VM SIZE                DATE       VM CLOCK
1         snap1                     0 2016-05-22 16:57:31   00:01:30.567
(qemu)

$ qemu-img snapshot -l disk0.qcow2
Snapshot list:
ID        TAG                 VM SIZE                DATE       VM CLOCK
1         snap1                     0 2016-05-22 16:57:31   00:01:30.567
2         checkpoint-1           165M 2016-05-22 16:58:07   00:02:06.813

$ qemu-img snapshot -l disk1.qcow2
Snapshot list:
ID        TAG                 VM SIZE                DATE       VM CLOCK
1         checkpoint-1              0 2016-05-22 16:58:07   00:02:06.813

The patch uses snapshot name instead of snapshot id to determine whether a
snapshot is fully available and uses '--' instead of snapshot id in output
because the snapshot id is not guaranteed to be the same on all images.
For instance:
(qemu) info snapshots
List of snapshots present on all disks:
 ID        TAG                 VM SIZE                DATE       VM CLOCK
 --        checkpoint-1           165M 2016-05-22 16:58:07   00:02:06.813

Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1467869164-26688-2-git-send-email-lma@suse.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13 13:41:39 +02:00
Paolo Bonzini
0b8b8753e4 coroutine: move entry argument to qemu_coroutine_create
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c).  So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.

Mostly done with the following semantic patch:

@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
  ...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);

@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
  ...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);

@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));

@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);

except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13 13:26:02 +02:00
Daniel P. Berrange
521d47c6dc trace: split out trace events for migration/ directory
Move all trace-events for files in the migration/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-6-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:14 +01:00
Liang Li
0d9f9a5c52 migration: code clean up
Use 'QemuMutex comp_done_lock' and 'QemuCond comp_done_cond' instead
of 'QemuMutex *comp_done_lock' and 'QemuCond comp_done_cond'. To keep
consistent with 'QemuMutex decomp_done_lock' and
'QemuCond comp_done_cond'.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-10-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:31 +05:30
Liang Li
33d151f418 migration: refine the decompression code
The current code for multi-thread decompression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-9-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:28 +05:30
Liang Li
a7a9a88f9d migration: refine the compression code
The current code for multi-thread compression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-8-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:26 +05:30
Liang Li
90e56fb46d migration: protect the quit flag by lock
quit_comp_thread and quit_decomp_thread are accessed by several
thread, it's better to protect them with locks. We use a per
thread flag to replace the global one, and the new flag is protected
by a lock.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-7-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:23 +05:30
Liang Li
fc50438ed0 migration: refine ram_save_compressed_page
Use qemu_put_compression_data to do the compression directly
instead of using do_compress_ram_page, avoid some data copy.
very small improvement, at the same time, add code to check
if the compression is successful.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-6-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:21 +05:30
Liang Li
b3be28969b qemu-file: Fix qemu_put_compression_data flaw
Current qemu_put_compression_data can only work with no writable
QEMUFile, and can't work with the writable QEMUFile. But it does
not provide any measure to prevent users from using it with a
writable QEMUFile.

We should fix this flaw to make it works with writable QEMUFile.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-5-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:18 +05:30
Liang Li
e7bb92e21a migration: remove useless code
page_buffer is set twice repeatedly, remove the previous set.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-4-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:14 +05:30
Liang Li
5533b2e9bc migration: Fix a potential issue
At the end of live migration and before vm_start() on the destination
side, we should make sure all the decompression tasks are finished, if
this can not be guaranteed, the VM may get the incorrect memory data,
or the updated memory may be overwritten by the decompression thread.
Add the code to fix this potential issue.

Suggested-by: David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:09 +05:30
Liang Li
73a8912b8a migration: Fix multi-thread compression bug
Recently, a bug related to multiple thread compression feature for
live migration is reported. The destination side will be blocked
during live migration if there are heavy workload in host and
memory intensive workload in guest, this is most likely to happen
when there is one decompression thread.

Some parts of the decompression code are incorrect:
1. The main thread receives data from source side will enter a busy
loop to wait for a free decompression thread.
2. A lock is needed to protect the decomp_param[idx]->start, because
it is checked in the main thread and is updated in the decompression
thread.

Fix these two issues by following the code pattern for compression.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:24:01 +05:30
Denis V. Lunev
6dcf66681a migration: fix inability to save VM after snapshot
The following sequence of operations fails:
    virsh start vm
    virsh snapshot-create vm
    virshh save vm --file file
with the following error
    error: Failed to save domain vm to file
    error: internal error: unable to execute QEMU command 'migrate':
    There's a migration process in progress

The problem is that qemu_savevm_state() calls migrate_init() which sets
migration state to MIGRATION_STATUS_SETUP and never cleaned it up.
This patch do the job.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1466003203-26263-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:23:57 +05:30
Dr. David Alan Gilbert
023ad1a6e9 migration: Trace improvements
A couple of improvements to tracing that have come out of helping
people with migration problems:
  * vmstate_n_elems trace the count/name - for when you have problems
    getting array counts right
  * vmstate_subsection_load_bad - add the idstr, for when you receive a
    subsection you weren't expecting.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465896986-16132-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:23:53 +05:30
Peter Maydell
4d88513157 migration: Don't use *_to_cpup() and cpu_to_*w()
The *_to_cpup() and cpu_to_*w() functions just compose a pointer
dereference with a byteswap. Instead use ld*_p() and st*_p(),
which handle potential pointer misalignment and avoid the need
to cast the pointer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1465574962-2710-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-17 18:23:49 +05:30
Paolo Bonzini
02d0e09503 os-posix: include sys/mman.h
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h.  Include it in
sysemu/os-posix.h and remove it from everywhere else.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 18:39:03 +02:00
Daniel P. Berrange
22724f4921 migration: rename functions to starting migrations
Apply the following renames for starting incoming migration:

 process_incoming_migration -> migration_fd_process_incoming
 migration_set_incoming_channel -> migration_channel_process_incoming
 migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming

and for starting outgoing migration:

 migration_set_outgoing_channel -> migration_channel_connect
 migration_tls_set_outgoing_channel -> migration_tls_channel_connect

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com
Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16 09:51:37 +05:30
Dr. David Alan Gilbert
096631bd95 Postcopy: Check for support when setting the capability
Knowing whether the destination host supports migration with
postcopy can be tricky.
The destination doesn't need the capability set, however
if we set it then use the opportunity to do the test and
tell the user/management layer early.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16 09:50:07 +05:30
Dr. David Alan Gilbert
d3bf5418e2 Postcopy: Add stats on page requests
On the source, add a count of page requests received from the
destination.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16 09:50:07 +05:30
Dr. David Alan Gilbert
a22463a5dc Migration: Split out ram part of qmp_query_migrate
The RAM section of qmp_query_migrate is reasonably complex
and repeated 3 times.  Split it out into a helper.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com
Reviwed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16 09:50:07 +05:30
Dr. David Alan Gilbert
d688c62d09 Postcopy: Avoid 0 length discards
The discard code in migration/ram.c would send request for
zero length discards in the case where no discards were needed.
It doesn't appear to have had any bad effect.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16 09:50:07 +05:30
Wen Congyang
88c16567d2 Introduce "xen-load-devices-state"
Introduce a "xen-load-devices-state" QAPI command that can be used to
load the state of all devices, but not the RAM or the block devices of
the VM.

We only have hmp commands savevm/loadvm, and qmp commands
xen-save-devices-state.

We use this new command for COLO:
1. suspend both primary vm and secondary vm
2. sync the state
3. resume both primary vm and secondary vm

In such case, we need to update all devices' state in any time.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-06-13 11:50:53 +01:00
Kevin Wolf
ebd2f9e7db migration/block: Convert saving to BlockBackend
This creates a new BlockBackend for copying data from an images to the
migration stream on the source host. All I/O for block migration goes
through BlockBackend now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08 10:21:08 +02:00
Kevin Wolf
ad2964b4ff migration/block: Convert load to BlockBackend
This converts the loading part of block migration to use BlockBackend
interfaces rather than accessing the BlockDriverState directly.

Note that this takes a lazy shortcut. We should really use a separate
BlockBackend that is configured for the migration rather than for the
guest (e.g. writethrough caching is unnecessary) and holds its own
reference to the BlockDriverState, but the impact isn't that big and we
didn't have a separate migration reference before either, so it must be
good enough, I guess...

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08 10:21:08 +02:00
Eric Blake
74021bc497 block: Switch bdrv_write_zeroes() to byte interface
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics.  Do the same for bdrv_co_write_zeroes().

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-08 10:21:08 +02:00
Peter Maydell
030c98aff1 all: Remove unnecessary glib.h includes
Remove glib.h includes, as it is provided by osdep.h.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:24 +03:00
Paolo Bonzini
f615f39616 exec: remove ram_addr argument from qemu_ram_block_from_host
Of the two callers, one does not use it, and the other can compute
it itself based on the other output argument (offset) and the RAMBlock.

Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:12 +02:00
Peter Maydell
aef11b8d33 migration: add TLS support to the migration data channel
This is a big refactoring of the migration backend code - moving away from
 QEMUFile to the new QIOChannel framework introduced here.  This brings a
 good level of abstraction and reduction of many lines of code.
 
 This series also adds the ability for many backends (all except RDMA) to
 use TLS for encrypting the migration data between the endpoints.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXRpKMAAoJEOsLTfxlfvZw2FMQAJmrp8ijvJNtdBa51bNY+xVx
 zvrHDpWco/HxxqyBIGxG7g8Iq+wpNsdgoRxoQkfgIz9RkZiNrzb1kGRiqNFFBKFX
 ziK1QQQ12ETUXwQ6VguBuwLDvCCenyUti0HfKkceG+Zu5263fyp+VzL+PuEtteT3
 M0pZRrifj/TQqCBXR8yhBAo2dCiFETLVoruE+iNg2ipI3JDizxy8bdOU2gfnTayf
 na7lE53pI+Wy8KE+qrhtsEgjHFp48uJ0HwQIIumvVndXFpIhRzCcN/aeVCjNYRjo
 GeI18OJxcimRDwsnfuOwuZKhRcjWfa8WEIKsi8LdRTZFpFL6y9R57XNTBIFfbjOF
 0lkmFTqJTBi3OTPjj0hMjpjOfXhyKUnwdqCAYlAxeuWHhqPDDhtEcnNtGdmQzx4Z
 KvYzc3t31o1gPin024UUfA528PNREszaXhTM90/Dj0dhVSMoG1VQsQjxzkPXxdM1
 wemfic+77Bk4oUrSplhdvvk4nySDWeseEjfdyVU2ixqldy8Ib1+6H+PCjWNotpQ0
 YiDOHBy3rrUh6NhIqb0C2PWvd/9Aqs0nHQHJ8QKYK574MDbVo8mKTACFdoSYoZ1u
 wuif7NL6qkyS55szf0dm8zPBCJ5nIR5SQE98E7+ptXNa8AipfFsTkZrr3aOjcdey
 98AWF9KaZOWRfwgIm3Ft
 =AYEK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' into staging

migration: add TLS support to the migration data channel

This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here.  This brings a
good level of abstraction and reduction of many lines of code.

This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.

# gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"

* remotes/amit-migration/tags/migration-2.7-2: (28 commits)
  migration: remove qemu_get_fd method from QEMUFile
  migration: remove support for non-iovec based write handlers
  migration: add support for encrypting data with TLS
  migration: define 'tls-creds' and 'tls-hostname' migration parameters
  migration: don't use an array for storing migrate parameters
  migration: move definition of struct QEMUFile back into qemu-file.c
  migration: delete QEMUFile stdio implementation
  migration: delete QEMUFile sockets implementation
  migration: delete QEMUSizedBuffer struct
  migration: delete QEMUFile buffer implementation
  migration: convert savevm to use QIOChannel for writing to files
  migration: convert RDMA to use QIOChannel interface
  migration: convert exec socket protocol to use QIOChannel
  migration: convert fd socket protocol to use QIOChannel
  migration: convert tcp socket protocol to use QIOChannel
  migration: rename unix.c to socket.c
  migration: convert unix socket protocol to use QIOChannel
  migration: convert post-copy to use QIOChannelBuffer
  migration: add reporting of errors for outgoing migration
  migration: add helpers for creating QEMUFile from a QIOChannel
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-26 16:09:27 +01:00
Daniel P. Berrange
12992c16d9 migration: remove qemu_get_fd method from QEMUFile
Now that there is a set_blocking callback in QEMUFileOps,
and all users needing non-blocking support have been
converted to QIOChannel, there is no longer any codepath
requiring the qemu_get_fd() method for QEMUFile. Remove it
to avoid further code being introduced with an expectation
of direct file handle access.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-29-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:21 +05:30
Daniel P. Berrange
11808bb0c4 migration: remove support for non-iovec based write handlers
All the remaining QEMUFile implementations provide an iovec
based write handler, so the put_buffer callback can be removed
to simplify the code.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-28-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:18 +05:30
Daniel P. Berrange
e122636562 migration: add support for encrypting data with TLS
This extends the migration_set_incoming_channel and
migration_set_outgoing_channel methods so that they
will automatically wrap the QIOChannel in a
QIOChannelTLS instance if TLS credentials are configured
in the migration parameters.

This allows TLS to work for tcp, unix, fd and exec
migration protocols. It does not (currently) work for
RDMA since it does not use these APIs, but it is
unlikely that TLS would be desired with RDMA anyway
since it would degrade the performance to that seen
with TCP defeating the purpose of using RDMA.

On the target host, QEMU would be launched with a set
of TLS credentials for a server endpoint

 $ qemu-system-x86_64 -monitor stdio -incoming defer \
    -object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=server,id=tls0 \
    ...other args...

To enable incoming TLS migration 2 monitor commands are
then used

  (qemu) migrate_set_str_parameter tls-creds tls0
  (qemu) migrate_incoming tcp:myhostname:9000

On the source host, QEMU is launched in a similar
manner but using client endpoint credentials

 $ qemu-system-x86_64 -monitor stdio \
    -object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=client,id=tls0 \
    ...other args...

To enable outgoing TLS migration 2 monitor commands are
then used

  (qemu) migrate_set_str_parameter tls-creds tls0
  (qemu) migrate tcp:otherhostname:9000

Thanks to earlier improvements to error reporting,
TLS errors can be seen 'info migrate' when doing a
detached migration. For example:

  (qemu) info migrate
  capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
  Migration status: failed
  total time: 0 milliseconds
  error description: TLS handshake failed: The TLS connection was non-properly terminated.

Or

  (qemu) info migrate
  capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
  Migration status: failed
  total time: 0 milliseconds
  error description: Certificate does not match the hostname localhost

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-27-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:13 +05:30
Daniel P. Berrange
69ef1f36b0 migration: define 'tls-creds' and 'tls-hostname' migration parameters
Define two new migration parameters to be used with TLS encryption.
The 'tls-creds' parameter provides the ID of an instance of the
'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'.
Providing these credentials will enable use of TLS on the migration
data stream.

If using x509 certificates, together with a migration URI that does
not include a hostname, the 'tls-hostname' parameter provides the
hostname to use when verifying the server's x509 certificate. This
allows TLS to be used in combination with fd: and exec: protocols
where a TCP connection is established by a 3rd party outside of
QEMU.

NB, this requires changing the migrate_set_parameter method in the
HMP to accept a 's' (string) value instead of 'i' (integer). This
is backwards compatible, because the parsing of strings allows the
quotes to be optional, thus any integer is also a valid string.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:10 +05:30
Daniel P. Berrange
2594f56d4c migration: don't use an array for storing migrate parameters
The MigrateState struct uses an array for storing migration
parameters. This presumes that all future parameters will
be integers too, which is not going to be the case. There
is no functional reason why an array is used, if anything
it makes the code less clear. The QAPI schema already
defines a struct - MigrationParameters - capable of storing
all the individual parameters, so just use that instead of
an array.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-25-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:07 +05:30
Daniel P. Berrange
a24939f279 migration: move definition of struct QEMUFile back into qemu-file.c
Now that the memory buffer based QEMUFile impl is gone, there
is no need for any backend to be accessing internals of the
QEMUFile struct, so it can be moved back into qemu-file.c

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-24-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:05 +05:30
Daniel P. Berrange
7fdc61c75d migration: delete QEMUFile stdio implementation
Now that the exec migration backend and savevm have converted
to use the QIOChannel based QEMUFile, there is no user remaining
for the stdio based QEMUFile impl and it can be deleted.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-23-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:03 +05:30
Daniel P. Berrange
40946ae40b migration: delete QEMUFile sockets implementation
Now that the tcp, unix and fd migration backends have converted
to use the QIOChannel based QEMUFile, there is no user remaining
for the sockets based QEMUFile impl and it can be deleted.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-22-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:00 +05:30
Daniel P. Berrange
2a22b4f370 migration: delete QEMUSizedBuffer struct
Now that we don't have have a buffer based QemuFile
implementation, the QEMUSizedBuffer code is also
unused and can be deleted. A simpler buffer class
also exists in util/buffer.c which other code can
used as needed.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-21-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:31:58 +05:30
Daniel P. Berrange
8b7c5c0f52 migration: delete QEMUFile buffer implementation
The qemu_bufopen() method is no longer used, so the memory
buffer based QEMUFile backend can be deleted entirely.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-20-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:31:55 +05:30
Daniel P. Berrange
8925839f00 migration: convert savevm to use QIOChannel for writing to files
Convert the exec savevm code to use QIOChannel and QEMUFileChannel,
instead of the stdio APIs.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-19-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:31:53 +05:30