The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The command complete callback has a SCSIRequest as the first argument,
and the status field of that structure is identical to the 'status'
argument. So drop the argument from the callback.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116184041.60465-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The category of the u2f-passthru device is not set, put it into the 'misc'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20201130083630.2520597-10-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Without that wireshark complains about invalid control setup data
for non-control transfers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210216144939.841873-1-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In order to keep track of the alternate setting that should be used for
a given interface, the USBDevice struct keeps an array of alternate
setting values, which is indexed by the interface number. In
usb_host_set_interface, when this array is updated, usb_host_ep_update
is called as a result. However, when usb_host_ep_update accesses the
active libusb_config_descriptor, it indexes udev->altsetting with the
loop variable, rather than the interface number.
With the simple trace backend enable, this behavior can be seen:
[...]
usb_xhci_xfer_start 0.440 pid=1215 xfer=0x5596a4b85930 slotid=0x1 epid=0x1 streamid=0x0
usb_packet_state_change 1.703 pid=1215 bus=0x1 port=b'1' ep=0x0 p=0x5596a4b85938 o=b'undef' n=b'setup'
usb_host_req_control 2.269 pid=1215 bus=0x1 addr=0x5 p=0x5596a4b85938 req=0x10b value=0x1 index=0xd
usb_host_set_interface 0.449 pid=1215 bus=0x1 addr=0x5 interface=0xd alt=0x1
usb_host_parse_config 2542.648 pid=1215 bus=0x1 addr=0x5 value=0x2 active=0x1
usb_host_parse_interface 1.804 pid=1215 bus=0x1 addr=0x5 num=0xc alt=0x0 active=0x1
usb_host_parse_endpoint 2.012 pid=1215 bus=0x1 addr=0x5 ep=0x2 dir=b'in' type=b'int' active=0x1
usb_host_parse_interface 1.598 pid=1215 bus=0x1 addr=0x5 num=0xd alt=0x0 active=0x1
usb_host_req_emulated 3.593 pid=1215 bus=0x1 addr=0x5 p=0x5596a4b85938 status=0x0
usb_packet_state_change 2.550 pid=1215 bus=0x1 port=b'1' ep=0x0 p=0x5596a4b85938 o=b'setup' n=b'complete'
usb_xhci_xfer_success 4.298 pid=1215 xfer=0x5596a4b85930 bytes=0x0
[...]
In particular, it is seen that although usb_host_set_interface sets the
alternate setting of interface 0xd to 0x1, usb_host_ep_update uses 0x0
as the alternate setting due to using the incorrect index to
udev->altsetting.
Fix this problem by getting the interface number from the active
libusb_config_descriptor, and then using that as the index to
udev->altsetting.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Message-Id: <20210201213021.500277-1-rosbrookn@ainfosec.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, blk_is_read_only() tells whether a given BlockBackend can
only be used in read-only mode because its root node is read-only. Some
callers actually try to answer a slightly different question: Is the
BlockBackend configured to be writable, by taking write permissions on
the root node?
This can differ, for example, for CD-ROM devices which don't take write
permissions, but may be backed by a writable image file. scsi-cd allows
write requests to the drive if blk_is_read_only() returns false.
However, the write request will immediately run into an assertion
failure because the write permission is missing.
This patch introduces separate functions for both questions.
blk_supports_write_perm() answers the question whether the block
node/image file can support writable devices, whereas blk_is_writable()
tells whether the BlockBackend is currently configured to be writable.
All calls of blk_is_read_only() are converted to one of the two new
functions.
Fixes: https://bugs.launchpad.net/bugs/1906693
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Handle host superspeedplus (usb 3.1+) devices like superspeed (usb 3.0)
devices. That is enough to get them handled properly by xhci. They show
up as superspeed devices inside the guest, but should be able to actually
run at higher speeds.
Reported-by: Angel Pagan <Angel.Pagan@stratus.com>
Tested-by: Angel Pagan <Angel.Pagan@stratus.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210121150832.3564097-1-kraxel@redhat.com>
Log all traffic of a specific usb device to a pcap file for later
inspection. File format is compatible with linux usb monitor.
Usage:
qemu -device usb-${somedevice},pcap=file.pcap
wireshark file.pcap
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210119194452.2148048-1-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We are not ready to handle additional CDB data.
If a guest sends a packet with such additional data,
report the command parameter as not supported.
Specify a size (of 1 byte) for the add_cdb member we
are not using, to fix the following warning:
usb/dev-uas.c:157:31: error: field 'status' with variable sized type 'uas_iu' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
uas_iu status;
^
Reported-by: Ed Maste <emaste@FreeBSD.org>
Reported-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Reported-by: Han Han <hhan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210120153522.1173897-4-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For some reason the assert() added in commit ccb799313a
("hw/usb: avoid format truncation warning when formatting
port name") does not fix when building with GCC 10.
KISS and expand the buffer by 4 bytes to silent the following
error when using GCC 10.2.1 on Fedora 33:
hw/usb/hcd-xhci.c: In function 'usb_xhci_realize':
hw/usb/hcd-xhci.c:3309:54: error: '%d' directive output may be truncated writing between 1 and 8 bytes into a region of size 5 [-Werror=format-truncation=]
3309 | snprintf(port->name, sizeof(port->name), "usb2 port #%d", i+1);
| ^~~~~~~~~~~~~~~
hw/usb/hcd-xhci.c:3309:54: note: directive argument in the range [1, 89478486]
In file included from /usr/include/stdio.h:866,
from include/qemu/osdep.h:85,
from hw/usb/hcd-xhci.c:22:
/usr/include/bits/stdio2.h:70:10: note: '__builtin___snprintf_chk' output between 13 and 20 bytes into a destination of size 16
70 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
71 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/usb/hcd-xhci.c:3323:54: error: '%d' directive output may be truncated writing between 1 and 8 bytes into a region of size 5 [-Werror=format-truncation=]
3323 | snprintf(port->name, sizeof(port->name), "usb3 port #%d", i+1);
| ^~~~~~~~~~~~~~~
hw/usb/hcd-xhci.c:3323:54: note: directive argument in the range [1, 89478486]
In file included from /usr/include/stdio.h:866,
from include/qemu/osdep.h:85,
from hw/usb/hcd-xhci.c:22:
/usr/include/bits/stdio2.h:70:10: note: '__builtin___snprintf_chk' output between 13 and 20 bytes into a destination of size 16
70 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
71 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210118181115.313742-1-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Device code shouldn't mess with QOM property "realized" since we have
proper interfaces (merge commit 6675a653). Commit 8ddab8dd3d
"usb/hcd-xhci: Split pci wrapper for xhci base model" and commit
f00ff136ee "usb: hcd-xhci-sysbus: Attach xhci to sysbus device"
reintroduced two instances. Clean them up. Note that s->xhci is
a (bus-less) TYPE_XHCI device.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210119120151.53757-1-armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201119025751.45750-1-alex.chen@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USBDEVFS_GET_SPEED is used since version 5.2.0 and
202d69a715
resulting in the following build failure with kernel < 5.0:
../hw/usb/host-libusb.c: In function 'usb_host_open':
../hw/usb/host-libusb.c:953:32: error: 'USBDEVFS_GET_SPEED' undeclared (first use in this function); did you mean 'USBDEVFS_GETDRIVER'?
int rc = ioctl(hostfd, USBDEVFS_GET_SPEED, NULL);
^~~~~~~~~~~~~~~~~~
USBDEVFS_GETDRIVER
A tentative was made to fix this build failure with
4969e697c1
However, the assumption that distros with old kernels also have old
libusb is just wrong so also add a check for defined(USBDEVFS_GET_SPEED)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-id: 20201213213016.457350-1-fontaine.fabrice@gmail.com
[ kraxel: codestyle whitespace fixup ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Generalize the qdev_hotplug variable to the different phases of
machine initialization. We would like to allow different
monitor commands depending on the phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This model is a top level integration wrapper for hcd-dwc3 and
versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and
future xilinx usb subsystems would also be part of it.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds skeleton model of dwc3 usb controller attached to
xhci-sysbus device. It defines global register space of DWC3 controller,
global registers control the AXI/AHB interfaces properties, external FIFO
support and event count support. All of which are unimplemented at
present,we are only supporting core reset and read of ID register.
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1607023357-5096-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This module emulates control registers of versal usb2 controller, this is added
just to make guest happy. In general this module would control the phy-reset
signal from usb controller, data coherency of the transactions, signals
the host system errors received from controller.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-2-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the "default y" for USB_XHCI_SYSBUS because
sysbus devices are not user creatable; boards that use them will
specify them manually with "imply" or "select" clauses.
It would be nice to keep the ability to remove PCIe and USB from microvm,
since thos can be disabled on the command line and therefore should not
be included if QEMU is configured --without-default-devices. However
it's too late for 5.2 to figure out a place for the DSDT creation code.
Reported-by: Bruce Rogers <brogers@suse.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GI5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-15' into staging
Fix Lesser GPL license versions (should be "2.1" and not "2")
# gpg: Signature made Sun 15 Nov 2020 16:20:10 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-15: (26 commits)
nomaintainer: Fix Lesser GPL version number
test: Fix LGPL information in the file headers
tests/acceptance: Fix LGPL information in the file headers
tests/migration: Fix LGPL information in the file headers
sparc tcg cpus: Fix Lesser GPL version number
e1000e: Fix Lesser GPL version number
x86 hvf cpus: Fix Lesser GPL version number
nvdimm: Fix Lesser GPL version number
w32: Fix Lesser GPL version number
tpm: Fix Lesser GPL version number
overall/alpha tcg cpus|hppa: Fix Lesser GPL version number
overall usermode...: Fix Lesser GPL version number
migration: Fix Lesser GPL version number
parallel nor flash: Fix Lesser GPL version number
arm tcg cpus: Fix Lesser GPL version number
x86 tcg cpus: Fix Lesser GPL version number
linux user: Fix Lesser GPL version number
usb: Fix Lesser GPL version number
tricore tcg cpus: Fix Lesser GPL version number
xtensa tcg cpus: Fix Lesser GPL version number
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v variable goes negative for reg < 0x20. Reorder the code
to first sanity check then calculate v and assign intr to make
sanity checkers happy.
Buglink: https://bugs.launchpad.net/qemu/+bug/1902112
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201105134112.25119-7-kraxel@redhat.com
Add property so scsi command logging can be switched
at runtime instead of compile time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201105134112.25119-3-kraxel@redhat.com
Replace most DPRINTF macros with trace events.
Drop some DPRINTF macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201105134112.25119-2-kraxel@redhat.com
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122332.19369-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Storing properties directly in XHCIPciState.xhci doesn't work,
the object_initialize_child() call in xhci_instance_init() will
overwrite them.
This changes the defaults for some properties, which in turn breaks
live migration and possibly other things as well.
So add XHCINecState, store properties there, copy them over on
instance init.
Fixes: 8ddab8dd3d ("usb/hcd-xhci: Split pci wrapper for xhci base model")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201112103741.2335-1-kraxel@redhat.com
Since commit 755fba11fb and 8ddab8dd3d we can not build
USB_XHCI_NEC without USB_XHCI_PCI. Correct the Kconfig
dependency.
Fixes: 755fba11fb ("usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c")
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201109135300.2592982-2-philmd@redhat.com
[ kraxel: restore "default y if PCI_DEVICES" because
"qemu-system-ppc64 -M pseries,usb=on" needs USB_XHCI_NEC=y ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that whilst the device does not do anything with these values, they are
logged with trace events and stored to allow future implementation.
The default flow control is set to none at reset as documented in the Linux
ftdi_sio.h header file.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-9-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also implement the behaviour reported in Linux's ftdi_sio.c whereby if an invalid
data_bits value is provided then the hardware defaults to using 8.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-8-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some operating systems will generate a new device ID when a USB device is unplugged
and then replugged into the USB. If this is done whilst switching between multiple
applications over a virtual serial port, the change of device ID requires going
back into the OS/application to locate the new device accordingly.
Add a new always-plugged property that if specified will ensure that the device
always remains attached to the USB regardless of the state of the backend
chardev.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-7-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DeviceOutVendor and DeviceInVendor macros can be replaced with their
equivalent VendorDeviceOutRequest and VendorDeviceRequest macros from usb.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-6-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.
Testing notes:
* With -device usb-kbd, qemu will automatically insert a full-speed
hub, and the keyboard becomes controlled by the OHCI controller.
* With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
attached to the port without any hubs, and the device becomes
controlled by the EHCI controller since it's high speed capable.
* With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
keyboard is directly attached to the port, but it only advertises
itself as full-speed capable, so it becomes controlled by the OHCI
controller.
In all cases, the keyboard device enumerates correctly.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
USB_XHCI does not depend on PCI any more.
USB_XHCI_SYSBUS must select USB_XHCI not USB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-5-kraxel@redhat.com
The helper generates an acpi dsdt device entry
for the xhci sysbus device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-4-kraxel@redhat.com
Move a bunch of defines which might be needed outside core xhci
code to that place. Add XHCI_ prefixes to avoid name clashes.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-3-kraxel@redhat.com
Check the value of mps to avoid potential divide-by-zero later in the function.
Since HCCHAR_MPS is guest controllable, this prevents a malicious/buggy guest
from crashing the QEMU process on the host.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Reported-by: Gaoning Pan <gaoning.pgn@antgroup.com>
Reported-by: Xingwei Lin <linyi.lxw@antfin.com>
Message-id: 20201015075957.268823-1-mcascell@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The EHCI Host Controller emulation attempt to locate the device
associated with a periodic isochronous transfer description (iTD) and
when this fail the host controller is reset.
But according the EHCI spec 1.0 section 5.15.2.4 Host System
Error, the host controller is supposed to reset itself only when it
failed to communicate with the Host (Operating System), like when
there's an error on the PCI bus. If a transaction fails, there's
nothing in the spec that say to reset the host controller.
This patch rework the error path so that the host controller can keep
working when the OS setup a bogus transaction, it also revert to the
behavior of the EHCI emulation to before commits:
e94682f1fe ("ehci: check device is not NULL before calling usb_ep_get()")
7011baece2 ("usb: remove unnecessary NULL device check from usb_ep_get()")
The issue has been found while trying to passthrough a USB device to a
Windows Server 2012 Xen guest via "usb-ehci", which prevent the USB
device from working in Windows. ("usb-ehci" alone works, windows only
setup this weird periodic iTD to device 127 endpoint 15 when the USB
device is passthrough.)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 20201014104106.2962640-1-anthony.perard@citrix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change several assert()s to qemu_log_mask(LOG_GUEST_ERROR...),
to prevent the guest from causing Qemu to assert. Also fix up
several existing qemu_log_mask()s to include the function name in
the message.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200920021449.830-1-pauldzim@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
