There have some code style problems be found when read the block driver code.
So I fixes some problems of this error, ERROR: "foo* bar" should be "foo *bar".
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Message-Id: <3211f389-6d22-46c1-4a16-e6a2ba66f070@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The QCowL2Meta structure is used to store information about a part of
a write request that touches clusters that need changes in their L2
entries. This happens with newly-allocated clusters or subclusters.
This structure has changed a bit since it was first created and its
current documentation is not quite up-to-date.
A write request can span a region consisting of a combination of
clusters of different types, and qcow2_alloc_host_offset() can
repeatedly call handle_copied() and handle_alloc() to add more
clusters to the mix as long as they all are contiguous on the image
file.
Because of this a write request has a list of QCowL2Meta structures,
one for each part of the request that needs changes in the L2
metadata.
Each one of them spans nb_clusters and has two copy-on-write regions
located immediately before and after the middle region touched by that
part of the write request. Even when those regions themselves are
empty their offsets must be correct because they are used to know the
location of the middle region.
This was not always the case but it is not a problem anymore
because the only two places where QCowL2Meta structures are created
(calculate_l2_meta() and qcow2_co_truncate()) ensure that the
copy-on-write regions are correctly defined, and so do assertions like
the ones in perform_cow().
The conditional initialization of the 'written_to' variable is
therefore unnecessary and is removed by this patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201007161323.4667-1-berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch introduces the icount field for saving within the snapshot.
It is required for navigation between the snapshots in record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v7 changes:
- also fix the test which checks qcow2 snapshot extra data
Message-Id: <160174518284.12451.2301137308458777398.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qcow2_alloc_cluster_offset() takes an (unaligned) guest offset and
returns the (aligned) offset of the corresponding cluster in the qcow2
image.
In practice none of the callers need to know where the cluster starts
so this patch makes the function calculate and return the final host
offset directly. The function is also renamed accordingly.
See 388e581615 for a similar change to qcow2_get_cluster_offset().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <9bfef50ec9200d752413be4fc2aeb22a28378817.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function takes an L2 entry and a number of clusters to free.
Although in principle it can free any type of cluster (using the L2
entry to determine its type) in practice the API is broken because
compressed clusters have a variable size and there is no way to free
more than one without having the L2 entry of each one of them.
The good news all callers are passing nb_clusters=1 so we can simply
get rid of that parameter.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <77cea0f4616f921d37e971b3c5b18a2faa24b173.1599573989.git.berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch replaces instances of sizeof(uint64_t) in the qcow2 driver
with macros that indicate what those sizes are actually referring to.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200828110828.13833-1-berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that the implementation of subclusters is complete we can finally
add the necessary options to create and read images with this feature,
which we call "extended L2 entries".
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6476caaa73216bd05b7bb2d504a20415e1665176.1594396418.git.berto@igalia.com>
[mreitz: %s/5\.1/5.2/; fixed 302's and 303's reference output]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This field allows us to indicate that the L2 metadata update does not
come from a write request with actual data but from a preallocation
request.
For traditional images this does not make any difference, but for
images with extended L2 entries this means that the clusters are
allocated normally in the L2 table but individual subclusters are
marked as unallocated.
This will allow preallocating images that have a backing file.
There is one special case: when we resize an existing image we can
also request that the new clusters are preallocated. If the image
already had a backing file then we have to hide any possible stale
data and zero out the new clusters (see commit 955c7d6687 for more
details).
In this case the subclusters cannot be left as unallocated so the L2
bitmap must be updated.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <960d4c444a4f5a870e2b47e5da322a73cd9a2f5a.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This works now at the subcluster level and pwrite_zeroes_alignment is
updated accordingly.
qcow2_cluster_zeroize() is turned into qcow2_subcluster_zeroize() with
the following changes:
- The request can now be subcluster-aligned.
- The cluster-aligned body of the request is still zeroized using
zero_in_l2_slice() as before.
- The subcluster-aligned head and tail of the request are zeroized
with the new zero_l2_subclusters() function.
There is just one thing to take into account for a possible future
improvement: compressed clusters cannot be partially zeroized so
zero_l2_subclusters() on the head or the tail can return -ENOTSUP.
This makes the caller repeat the *complete* request and write actual
zeroes to disk. This is sub-optimal because
1) if the head area was compressed we would still be able to use
the fast path for the body and possibly the tail.
2) if the tail area was compressed we are writing zeroes to the
head and the body areas, which are already zeroized.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <17e05e2ee7e12f10dcf012da81e83ebe27eb3bef.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The logic of this function remains pretty much the same, except that
it uses count_contiguous_subclusters(), which combines the logic of
count_contiguous_clusters() / count_contiguous_clusters_unallocated()
and checks individual subclusters.
qcow2_cluster_to_subcluster_type() is not necessary as a separate
function anymore so it's inlined into its caller.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <d2193fd48653a350d80f0eca1c67b1d9053fb2f3.1594396418.git.berto@igalia.com>
[mreitz: Initialize expected_type to anything]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to support extended L2 entries some functions of the qcow2
driver need to start dealing with subclusters instead of clusters.
qcow2_get_host_offset() is modified to return the subcluster type
instead of the cluster type, and all callers are updated to replace
all values of QCow2ClusterType with their QCow2SubclusterType
equivalents.
This patch only changes the data types, there are no semantic changes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <f6c29737c295f32cbee74c903c30b01820363b34.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function returns an integer that can be either an error code or a
cluster type (a value from the QCow2ClusterType enum).
We are going to start using subcluster types instead of cluster types
in some functions so it's better to use the exact data types instead
of integers for clarity and in order to detect errors more easily.
This patch makes qcow2_get_host_offset() return 0 on success and
puts the returned cluster type in a separate parameter. There are no
semantic changes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <396b6eab1859a271551dcd7dcba77f8934aa3c3f.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This helper function tells us if a cluster is allocated (that is,
there is an associated host offset for it).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6d8771c5c79cbdc6c519875a5078e1cc85856d63.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds QCow2SubclusterType, which is the subcluster-level
version of QCow2ClusterType. All QCOW2_SUBCLUSTER_* values have the
the same meaning as their QCOW2_CLUSTER_* equivalents (when they
exist). See below for details and caveats.
In images without extended L2 entries clusters are treated as having
exactly one subcluster so it is possible to replace one data type with
the other while keeping the exact same semantics.
With extended L2 entries there are new possible values, and every
subcluster in the same cluster can obviously have a different
QCow2SubclusterType so functions need to be adapted to work on the
subcluster level.
There are several things that have to be taken into account:
a) QCOW2_SUBCLUSTER_COMPRESSED means that the whole cluster is
compressed. We do not support compression at the subcluster
level.
b) There are two different values for unallocated subclusters:
QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN which means that the whole
cluster is unallocated, and QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC
which means that the cluster is allocated but the subcluster is
not. The latter can only happen in images with extended L2
entries.
c) QCOW2_SUBCLUSTER_INVALID is used to detect the cases where an L2
entry has a value that violates the specification. The caller is
responsible for handling these situations.
To prevent compatibility problems with images that have invalid
values but are currently being read by QEMU without causing side
effects, QCOW2_SUBCLUSTER_INVALID is only returned for images
with extended L2 entries.
qcow2_cluster_to_subcluster_type() is added as a separate function
from qcow2_get_subcluster_type(), but this is only temporary and both
will be merged in a subsequent patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <26ef38e270f25851c98b51278852b4c4a7f97e69.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Extended L2 entries are 128-bit wide: 64 bits for the entry itself and
64 bits for the subcluster allocation bitmap.
In order to support them correctly get/set_l2_entry() need to be
updated so they take the entry width into account in order to
calculate the correct offset.
This patch also adds the get/set_l2_bitmap() functions that are
used to access the bitmaps. For convenience we allow calling
get_l2_bitmap() on images without subclusters. In this case the
returned value is always 0 and has no meaning.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6ee0f81ae3329c991de125618b3675e1e46acdbb.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2 images with subclusters have 128-bit L2 entries. The first 64
bits contain the same information as traditional images and the last
64 bits form a bitmap with the status of each individual subcluster.
Because of that we cannot assume that L2 entries are sizeof(uint64_t)
anymore. This function returns the proper value for the image.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <d34d578bd0380e739e2dde3e8dd6187d3d249fa9.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Like offset_into_cluster() and size_to_clusters(), but for
subclusters.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <3cc2390dcdef3d234d47c741b708bd8734490862.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For a given offset, return the subcluster number within its cluster
(i.e. with 32 subclusters per cluster it returns a number between 0
and 31).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <56e3e4ac0d827c6a2f5f259106c5ddb7c4ca2653.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds the following new fields to BDRVQcow2State:
- subclusters_per_cluster: Number of subclusters in a cluster
- subcluster_size: The size of each subcluster, in bytes
- subcluster_bits: No. of bits so 1 << subcluster_bits = subcluster_size
Images without subclusters are treated as if they had exactly one
subcluster per cluster (i.e. subcluster_size = cluster_size).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <55bfeac86b092fa2c9d182a95cbeb479ff7eca4f.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function will be used by the qcow2 code to check if an image has
subclusters or not.
At the moment this simply returns false. Once all patches needed for
subcluster support are ready then QEMU will be able to create and
read images with subclusters and this function will return the actual
value.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <905526221083581a1b7057bca1585487661c5c13.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The size of an L2 entry is 64 bits, but if we want to have subclusters
we need extended L2 entries. This means that we have to access L2
tables and slices differently depending on whether an image has
extended L2 entries or not.
This patch replaces all l2_slice[] accesses with calls to
get_l2_entry() and set_l2_entry().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <9586363531fec125ba1386e561762d3e4224e9fc.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_get_cluster_offset() takes an (unaligned) guest offset and
returns the (aligned) offset of the corresponding cluster in the qcow2
image.
In practice none of the callers need to know where the cluster starts
so this patch makes the function calculate and return the final host
offset directly. The function is also renamed accordingly.
There is a pre-existing exception with compressed clusters: in this
case the function returns the complete cluster descriptor (containing
the offset and size of the compressed data). This does not change with
this patch but it is now documented.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <ffae6cdc5ca8950e8280ac0f696dcc376cb07095.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Upcoming patches will enhance bitmap support in qemu-img, but in doing
so, it turns out to be nice to suppress output when persistent bitmaps
make no sense (such as on a qcow2 v2 image). Add a hook to make this
easier to query.
This patch adds a new callback .bdrv_supports_persistent_dirty_bitmap,
rather than trying to shoehorn the answer in via existing callbacks.
In particular, while it might have been possible to overload
.bdrv_co_can_store_new_dirty_bitmap to special-case a NULL input to
answer whether any persistent bitmaps are supported, that is at odds
with whether a particular bitmap can be stored (for example, even on
an image that supports persistent bitmaps but has currently filled up
the maximum number of bitmaps, attempts to store another one should
fail); and the new functionality doesn't require coroutine safety.
Similarly, we could have added one more piece of information to
.bdrv_get_info, but then again, most callers to that function tend to
already discard extraneous information, and making it a catch-all
rather than a series of dedicated scalar queries hasn't really
simplified life.
In the future, when we improve the ability to look up bitmaps through
a filter, we will probably also want to teach the block layer to
automatically let filters pass this request on through.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513011648.166876-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These fields were already removed in commit c3c10f72, but then commit
b58deb34 revived them probably due to bad merge conflict resolution.
They are still unused, so remove them again.
Fixes: b58deb344d
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326170757.12344-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_check_read_snapshot_table() can perform consistency checks, but it
cannot fix everything. Specifically, it cannot allocate new clusters,
because that should wait until the refcount structures are known to be
consistent (i.e., after qcow2_check_refcounts()). Thus, it cannot call
qcow2_write_snapshots().
Do that in qcow2_check_fix_snapshot_table(), which is called after
qcow2_check_refcounts().
Currently, there is nothing that would set result->corruptions, so this
is a no-op. A follow-up patch will change that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reading the snapshot table can fail. That is a problem when we want to
repair the image.
Therefore, stop reading the snapshot table in qcow2_do_open() in check
mode. Instead, add a new function qcow2_check_read_snapshot_table()
that reads the snapshot table at a later point. In the future, we want
to handle errors here and fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Updating the snapshot list will be useful when upgrading a v2 image to
v3, so we will need to call this function in qcow2.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qcow2 specification says to ignore unknown extra data fields in
snapshot table entries. Currently, we discard it whenever we update the
image, which is a bit different from "ignore".
This patch makes the qcow2 driver keep all unknown extra data fields
when updating an image's snapshot table.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-5-mreitz@redhat.com
[mreitz: Adjusted comments as proposed by Eric]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_reopen_bitmaps_ro wants to store bitmaps and then mark them all
readonly. But the latter don't work, as
qcow2_store_persistent_dirty_bitmaps removes bitmaps after storing.
It's OK for inactivation but bad idea for reopen-ro. And this leads to
the following bug:
Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses
writes (*)
Incremental backup
it will be inconsistent
So, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not
work after this patch and we can't enable corresponding test cases in
260 iotests still. Reopening bitmaps rw will be fixed in the following
patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-7-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The function is unused, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-6-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
qmp_block_dirty_bitmap_add and do_block_dirty_bitmap_remove do acquire
aio context since 0a6c86d024. But this is not enough: we also must
lock qcow2 mutex when access in-image metadata. Especially it concerns
freeing qcow2 clusters.
To achieve this, move qcow2_can_store_new_dirty_bitmap and
qcow2_remove_persistent_dirty_bitmap to coroutine context.
Since we work in coroutines in correct aio context, we don't need
context acquiring in blockdev.c anymore, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's more comfortable to not deal with local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
It improves performance for fragmented qcow2 images.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
* Change the qcow2_co_{encrypt|decrypt} to just receive full host and
guest offsets and use this function directly instead of calling
do_perform_cow_encrypt (which is removed by that patch).
* Adjust qcow2_co_encdec to take full host and guest offsets as well.
* Document the qcow2_co_{encrypt|decrypt} arguments
to prevent the bug fixed in former commit from hopefully
happening again.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190915203655.21638-3-mlevitsk@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[mreitz: Let perform_cow() return the error value returned by
qcow2_co_encrypt(), as proposed by Vladimir]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-13-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6eb.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If COW areas of the newly allocated clusters are zeroes on the backing
image, efficient bdrv_write_zeroes(flags=BDRV_REQ_NO_FALLBACK) can be
used on the whole cluster instead of writing explicit zero buffers later
in perform_cow().
iotest 060:
write to the discarded cluster does not trigger COW anymore.
Use a backing image instead.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190516142749.81019-2-anton.nefedov@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Do encryption/decryption in threads, like it is already done for
compression. This improves asynchronous encrypted io.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move generic part out of qcow2_co_do_compress, to reuse it for
encryption and rename things that would be shared with encryption path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move compression-on-threads to separate file. Encryption will be in it
too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2.h depends on block_int.h. Compilation isn't broken currently only
due to block_int.h always included before qcow2.h. Though, it seems
better to directly include block_int.h in qcow2.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When an L2 table entry points to a compressed cluster the space used
by the data is specified in 512-byte sectors. This size is independent
from BDRV_SECTOR_SIZE and is specific to the qcow2 file format.
The QCOW2_COMPRESSED_SECTOR_SIZE constant defined in this patch makes
this explicit.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The last user of this field disappeared when we replace the
sector-based bdrv_write() with the byte-based bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we now load all bitmaps into memory anyway, we can just truncate
them in-memory and then flush them back to disk. Just in case, we will
still check and enforce that this shortcut is valid -- i.e. that any
bitmap described on-disk is indeed in-memory and can be modified.
If there are any inconsistent bitmaps, we refuse to allow the truncate
as we do not actually load these bitmaps into memory, and it isn't safe
or reasonable to attempt to truncate corrupted data.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190311185147.52309-4-vsementsov@virtuozzo.com
[vsementsov: drop bitmap flushing, fix block comments style]
Signed-off-by: John Snow <jsnow@redhat.com>
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than requiring that the external data file node is passed
explicitly when creating the qcow2 node, store the filename in the
designated header extension during .bdrv_create and read it from there
as a default during .bdrv_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
