We had a test for a case where relative extent paths did not work, but
unfortunately we just fixed the underlying problem, so it works now.
This patch adds a new test case that still fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This makes iotest 033 pass with e.g. subformat=monolithicFlat. It also
turns a former error in 059 into success.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
fe646693ac changed qemu-img create's output so that it no longer prints
single quotes around parameter values. The subformat and adapter_type
filters in _filter_img_create() have never been adapted to that change.
Fixes: fe646693ac
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using block_resize we can test allocate_first_block() with file
descriptor opened with O_DIRECT, ensuring that it works for any size
larger than 4096 bytes.
Testing smaller sizes is tricky as the result depends on the filesystem
used for testing. For example on NFS any size will work since O_DIRECT
does not require any alignment.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190827010528.8818-3-nsoffer@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When creating an image with preallocation "off" or "falloc", the first
block of the image is typically not allocated. When using Gluster
storage backed by XFS filesystem, reading this block using direct I/O
succeeds regardless of request length, fooling alignment detection.
In this case we fallback to a safe value (4096) instead of the optimal
value (512), which may lead to unneeded data copying when aligning
requests. Allocating the first block avoids the fallback.
Since we allocate the first block even with preallocation=off, we no
longer create images with zero disk size:
$ ./qemu-img create -f raw test.raw 1g
Formatting 'test.raw', fmt=raw size=1073741824
$ ls -lhs test.raw
4.0K -rw-r--r--. 1 nsoffer nsoffer 1.0G Aug 16 23:48 test.raw
And converting the image requires additional cluster:
$ ./qemu-img measure -f raw -O qcow2 test.raw
required size: 458752
fully allocated size: 1074135040
When using format like vmdk with multiple files per image, we allocate
one block per file:
$ ./qemu-img create -f vmdk -o subformat=twoGbMaxExtentFlat test.vmdk 4g
Formatting 'test.vmdk', fmt=vmdk size=4294967296 compat6=off hwversion=undefined subformat=twoGbMaxExtentFlat
$ ls -lhs test*.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f001.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f002.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 353 Aug 27 03:23 test.vmdk
I did quick performance test for copying disks with qemu-img convert to
new raw target image to Gluster storage with sector size of 512 bytes:
for i in $(seq 10); do
rm -f dst.raw
sleep 10
time ./qemu-img convert -f raw -O raw -t none -T none src.raw dst.raw
done
Here is a table comparing the total time spent:
Type Before(s) After(s) Diff(%)
---------------------------------------
real 530.028 469.123 -11.4
user 17.204 10.768 -37.4
sys 17.881 7.011 -60.7
We can see very clear improvement in CPU usage.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827010528.8818-2-nsoffer@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's wrong to OR shared permissions. It may lead to crash on further
permission updates.
Also, no needs to consider previously calculated permissions, as at
this point we already bind all new parents and bdrv_get_cumulative_perm
result is enough. So fix the bug by just set permissions by
bdrv_get_cumulative_perm result.
Bug was introduced in long ago 234ac1a902, in 2.9.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190824100740.61635-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch allows to provide a pattern file for write
command. There was no similar ability before.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-id: 20190820164616.4072-1-dplotnikov@virtuozzo.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Keep optstring in alphabetical order]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This reverts commit 45db1ac157 ("modules-test: ui-spice-app is not
built as module") and fixes commit d8aec9d9f1 ("display: add -display
spice-app launching a Spice client").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190827140241.20818-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-13-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-12-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-12-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use buffer based io in encrypted case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-11-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-11-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce extended variants of bdrv_co_preadv and bdrv_co_pwritev
with qiov_offset parameter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-10-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-10-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use and support new API in bdrv_aligned_pwritev.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-9-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-9-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use and support new API in bdrv_co_do_copy_on_readv.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-8-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-8-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allocate bounce_buffer only if it is really needed. Also, sub-optimize
allocation size (why not?).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-7-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-7-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use and support new API in bdrv_co_do_copy_on_readv. Note that in case
of allocated-in-top we need to shrink read size to MIN(..) by hand, as
pre-patch this was actually done implicitly by qemu_iovec_concat (and
we used local_qiov.size).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-6-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-6-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add handlers supporting qiov_offset parameter:
bdrv_co_preadv_part
bdrv_co_pwritev_part
bdrv_co_pwritev_compressed_part
This is used to reduce need of defining local_qiovs and hd_qiovs in all
corners of block layer code. The following patches will increase usage
of this new API part by part.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-5-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-5-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have similar padding code in bdrv_co_pwritev,
bdrv_co_do_pwrite_zeroes and bdrv_co_preadv. Let's combine and unify
it.
[Squashed in Vladimir's qemu-iotests 077 fix
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-4-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-4-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We'll need to check a part of qiov soon, so implement it now.
Optimization with align down to 4 * sizeof(long) is dropped due to:
1. It is strange: it aligns length of the buffer, but where is a
guarantee that buffer pointer is aligned itself?
2. buffer_is_zero() is a better place for optimizations and it has
them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-3-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-3-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce new initialization API, to create requests with padding. Will
be used in the following patch. New API uses qemu_iovec_init_buf if
resulting io vector has only one element, to avoid extra allocations.
So, we need to update qemu_iovec_destroy to support destroying such
QIOVs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-2-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-2-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When QEMU receives a xenstore watch event suggesting that the "state"
of the frontend changed, it records this in its own state but it also
re-write the value back into xenstore even so there were no change.
This triggers an unnecessary xenstore watch event which QEMU will
process again (and maybe the frontend as well). Also QEMU could
potentially write an already old value.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190823101534.465-3-anthony.perard@citrix.com>
When a frontend wants to reset its state and the backend one, it
starts with setting "Closing", then waits for the backend (QEMU) to do
the same.
But when QEMU is setting "Closing" to its state, it triggers an event
(xenstore watch) that re-execute xen_device_backend_changed() and set
the backend state to "Closed". QEMU should wait for the frontend to
set "Closed" before doing the same.
Before setting "Closed" to the backend_state, we are also going to
check if there is a frontend. If that the case, when the backend state
is set to "Closing" the frontend should react and sets its state to
"Closing" then "Closed". The backend should wait for that to happen.
Fixes: b6af8926fb
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190823101534.465-2-anthony.perard@citrix.com>
Device model is supposed to destroy IOREQ server for itself.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <1564428563-1006-1-git-send-email-igor.druzhinin@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The xen_[rw]?mb() macros defined in ring.h can't be used and the fact
that there are gated behind __XEN_INTERFACE_VERSION__ means that it
needs to be defined somewhere. QEMU doesn't implement interfaces with
the Xen hypervisor so defining __XEN_INTERFACE_VERSION__ is pointless.
This leads to:
include/hw/xen/io/ring.h:47:5: error: "__XEN_INTERFACE_VERSION__"
is not defined, evaluates to 0 [-Werror=undef]
Cleanup ring.h. The xen_*mb() macros are already defined in xenctrl.h
which is included in xen_common.h.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190704153605.4140-1-anthony.perard@citrix.com>
[aperard: Adding the comment proposed upstream]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Commit e41c945297 ("target/alpha: Convert to CPUClass::tlb_fill")
slightly changed the way the trap_arg2 value is computed in case of TLB
fill. The type of the variable used in the ternary operator has been
changed from an int to an enum. This causes the -1 value to not be
sign-extended to 64-bit in case of an instruction fetch. The trap_arg2
ends up with 0xffffffff instead of 0xffffffffffffffff. Fix that by
changing the -1 into -1LL.
This fixes the execution of user space processes in qemu-system-alpha.
Fixes: e41c945297
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[rth: Test MMU_DATA_LOAD and MMU_DATA_STORE instead of implying them.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
$(call land, $(CONFIG_SPICE), $(CONFIG_GIO)) will never return "m" so
ui-spice-app is always linked into QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 1566495734-23297-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a missing cast; this fixes a build failure with --enable-modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 1566495734-23297-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
-----BEGIN PGP SIGNATURE-----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=adkl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/autofree-pull-request' into staging
require newer glib2 to enable autofree'ing of stack variables exiting scope
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
# gpg: Signature made Thu 22 Aug 2019 11:51:59 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/autofree-pull-request:
crypto: use auto cleanup for many stack variables
crypto: define cleanup functions for use with g_autoptr
glib: bump min required glib library version to 2.48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
The qemu commit e6cc11d64f
has already resolved the issue for vhost scsi devices but
the fix was never applied to vhost-user scsi devices.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com
Message-Id: <1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tests/test-bdrv-drain /bdrv-drain/iothread/drain test case does the
following:
1. The preadv coroutine calls aio_bh_schedule_oneshot() and then yields.
2. The one-shot BH executes in another AioContext. All it does is call
aio_co_wakeup(preadv_co).
3. The preadv coroutine is re-entered and returns.
There is a race condition in aio_co_wake() where the preadv coroutine
returns and the test case destroys the preadv IOThread. aio_co_wake()
can still be running in the other AioContext and it performs an access
to the freed IOThread AioContext.
Here is the race in aio_co_schedule():
QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
co, co_scheduled_next);
<-- race: co may execute before we invoke qemu_bh_schedule()!
qemu_bh_schedule(ctx->co_schedule_bh);
So if co causes ctx to be freed then we're in trouble. Fix this problem
by holding a reference to ctx.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190723190623.21537-1-stefanha@redhat.com
Message-Id: <20190723190623.21537-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Skip the tests if socket_check_protocol_support() failed, but do run
g_test_run() to keep TAP harness happy.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
getaddrinfo() may succeed with PF_UNSPEC, but fail when more specific.
(this allows to skip some tests that would fail under podman)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a --engine option to select either docker, podman or auto.
Among other advantages, podman allows to run rootless & daemonless
containers, fortunately sharing compatible CLI with docker.
With current podman, we have to use a uidmap trick in order to be able
to rw-share the ccache directory with the container user.
With a user 1000, the default mapping is: 1000 (host) -> 0 (container).
So write access to /var/tmp/ccache ends will end with permission
denied error.
With "--uidmap 1000:0:1 --uidmap 0:1:1000", the mapping is:
1000 (host) -> 0 (container, 1st namespace) -> 1000 (container, 2nd namespace).
(the rest is mumbo jumbo to avoid holes in the range of UIDs)
A future podman version may have an option such as --userns-keep-uid.
Thanks to Debarshi Ray <rishi@redhat.com> for the help!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(podman will need further tweaks)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Factor it out, add a comment how it all works, and also use it in the
REAL MMU.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Any access sets the reference bit. In case we have a read-fault, we
should not allow writes to the TLB entry if the change bit was not
already set.
This is a preparation for proper storage-key reference/change bit handling
in TCG and a fix for KVM whereby read accesses would set the change
bit (old KVM versions without the ioctl to carry out the translation).
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Whenever we modify a storage key, we should flush the TLBs of all CPUs,
so the MMU fault handling code can properly consider the changed storage
key (to e.g., properly set the reference and change bit on the next
accesses).
These functions are barely used in modern Linux guests, so the performance
implications are neglectable for now.
This is a preparation for better reference and change bit handling for
TCG, which will require more MMU changes.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-5-david@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Max Reitz
Nir Soffer
Vladimir Sementsov-Ogievskiy
Denis Plotnikov
Peter Maydell
Marc-André Lureau
Anthony PERARD
Igor Druzhinin
Aurelien Jarno
Paolo Bonzini
Raphael Norwitz
Stefan Hajnoczi
David Hildenbrand