These files obviously belong to the nios2 target, so they should
be listed in the nios2 section in the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/ppc/ppc440_uc.c implements the TYPE_PPC460EX_PCIE_HOST
device, which is used by the aCube Sam460ex board.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Apparently l2sram_update_mappings() bit-rotted over time,
when defining MAP_L2SRAM we get:
hw/ppc/ppc440_uc.c:83:17: error: no member named 'isarc' in 'struct ppc4xx_l2sram_t'
if (l2sram->isarc != isarc ||
~~~~~~ ^
hw/ppc/ppc440_uc.c:84:18: error: no member named 'isacntl' in 'struct ppc4xx_l2sram_t'
(l2sram->isacntl & 0x80000000) != (isacntl & 0x80000000)) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:85:21: error: no member named 'isacntl' in 'struct ppc4xx_l2sram_t'
if (l2sram->isacntl & 0x80000000) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:88:50: error: no member named 'isarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->isarc_ram);
~~~~~~ ^
hw/ppc/ppc440_uc.c:93:50: error: no member named 'isarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->isarc_ram);
~~~~~~ ^
hw/ppc/ppc440_uc.c:96:17: error: no member named 'dsarc' in 'struct ppc4xx_l2sram_t'
if (l2sram->dsarc != dsarc ||
~~~~~~ ^
hw/ppc/ppc440_uc.c:97:18: error: no member named 'dsacntl' in 'struct ppc4xx_l2sram_t'
(l2sram->dsacntl & 0x80000000) != (dsacntl & 0x80000000)) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:98:21: error: no member named 'dsacntl' in 'struct ppc4xx_l2sram_t'
if (l2sram->dsacntl & 0x80000000) {
~~~~~~ ^
hw/ppc/ppc440_uc.c💯52: error: no member named 'dsarc' in 'struct ppc4xx_l2sram_t'
if (!(isacntl & 0x80000000) || l2sram->dsarc != isarc) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:103:54: error: no member named 'dsarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->dsarc_ram);
~~~~~~ ^
hw/ppc/ppc440_uc.c:111:54: error: no member named 'dsarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->dsarc_ram);
~~~~~~ ^
Remove that dead code.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In query_port() we pass the address of a local pvrdma_port_attr
struct to the rdma_query_backend_port() function. Unfortunately,
rdma_backend_query_port() wants a pointer to a struct ibv_port_attr,
and the two are not the same length.
Coverity spotted this (CID 1507146): pvrdma_port_attr is 48 bytes
long, and ibv_port_attr is 52 bytes, because it has a few extra
fields at the end.
Fortunately, all we do with the attrs struct after the call is to
read a few specific fields out of it which are all at the same
offsets in both structs, so we can simply make the local variable the
correct type. This also lets us drop the cast (which should have
been a bit of a warning flag that we were doing something wrong
here).
We do however need to add extra casts for the fields of the
struct that are enums: clang will complain about the implicit
cast to a different enum type otherwise.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
=Esj+
-----END PGP SIGNATURE-----
Merge tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Add emulation of a C3700 HP-PARISC workstation
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
# X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
# jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
# =Esj+
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 15:51:57 PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Add new HP C3700 machine
hw/hppa: Split out machine creation
hw/hppa: Provide RTC and DebugOutputPort on CPU #0
hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
MAINTAINERS: Update HP-PARISC entries
pci-host: Wire up new Astro/Elroy PCI bridge
hw/pci-host: Add Astro system bus adapter found on PA-RISC machines
lasips2: LASI PS/2 devices are not user-createable
pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip
hw/hppa: Require at least SeaBIOS-hppa version 10
target/hppa: Update to SeaBIOS-hppa version 10
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
-----BEGIN PGP SIGNATURE-----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=9dZy
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20231019' of https://github.com/philmd/qemu into staging
Misc hardware patch queue
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmUxnKAACgkQ4+MsLN6t
# wN6UPw//abFZgckpxDYow4UfMu7esvkhICBvXjqDEdX2U/PBYmef049T5RVW8oDm
# NWnxRA9XydzTeToH56tU2tjXbjWKF5LcJVwrCNl6XFRdLYaR3hzejm96hX99C89J
# PB/2ineeAwidBoFfgjkvz0FLRr1ePaN74YXedPSHzywG+0dAOvpNUubbsggn3i5k
# 1wTlgfDvL6iz8NMEOSBp6cv5D4Ix0WshkqlCac0gQ74lYSM1tk/EeRiSy2IHWQQB
# 4FHd9Wo9brzLQCbhbb4FapTK0POScy0LebzRWOWfLtyWS+FRBC3kxO126I67CwMb
# XRS4YgBqC3U7IGsbzV+fWP01pVeJRzZ1vrv4vdiIYvqTdgNlmFbGjJUwEmPmrokt
# q5UreAjMUNLMEXiY6QHFq3N5I+UMY1jslcf7K/ZwDqSlqaquAe+gbnQOAMXDYgb6
# GWsBrLM2WA5E9ObbxsHdxgZqW1NxcWJpSBvjNiOV9t/jqoqpxYwHr5HAvR1xUwm+
# qRKRayRpLlX/Yad4NlvJaH5jvsMrI4bnxTYWVevLvYzc07Xo3dVxW1c+P+WCdjfM
# O3bLAvwO7Mw7GRiSNpU8zTbRJu/dS4NWDWZ24u606Cy7qD/qouz89JjkKVYYSFkX
# vNp7YOenPf4K6pak/lC3NOLIPlYmnnCLv3RCiaO6wHi4bk1yEBU=
# =9dZy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 14:16:16 PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20231019' of https://github.com/philmd/qemu: (46 commits)
ui/input: Constify QemuInputHandler structure
hw/net: Declare link using static DEFINE_PROP_LINK() macro
hw/dma: Declare link using static DEFINE_PROP_LINK() macro
hw/scsi/virtio-scsi: Use VIRTIO_SCSI_COMMON() macro
hw/display/virtio-gpu: Use VIRTIO_DEVICE() macro
hw/block/vhost-user-blk: Use DEVICE() / VIRTIO_DEVICE() macros
hw/virtio/virtio-pmem: Replace impossible check by assertion
hw/s390x/css-bridge: Realize sysbus device before accessing it
hw/isa: Realize ISA bridge device before accessing it
hw/arm/virt: Realize ARM_GICV2M sysbus device before accessing it
hw/acpi: Realize ACPI_GED sysbus device before accessing it
hw/pci-host/bonito: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Move sysbus_mmio_map call from init -> realize
hw/i386/intel_iommu: Do not use SysBus API to map local MMIO region
hw/i386/amd_iommu: Do not use SysBus API to map local MMIO region
hw/audio/pcspk: Inline pcspk_init()
hw/intc/spapr_xive: Do not use SysBus API to map local MMIO region
hw/intc/spapr_xive: Move sysbus_init_mmio() calls around
hw/ppc/pnv: Do not use SysBus API to map local MMIO region
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder
* hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot'
* xlnx devices: remove deprecated device reset
* xlnx-bbram: hw/nvram: Use dot in device type name
* elf2dmp: fix coverity issues
* elf2dmp: convert to g_malloc, g_new and g_free
* target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0
* hw/arm: refactor virt PPI logic
* arm/kvm: convert to kvm_set_one_reg, kvm_get_one_reg
* target/arm: Permit T32 LDM with single register
* smmuv3: Advertise SMMUv3.1-XNX
* target/arm: Implement FEAT_HPMN0
* Remove some unnecessary include lines
* target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL
* hw/timer/npcm7xx_timer: Prevent timer from counting down past zero
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmUxMF4ZHHBldGVyLm1h
eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oJND/4p64q0Wxq8x8yXCDUZAHME
lZe2liBPBkqZusGfK0O4CpClwGbM5+8tMeLaRgSOUgJ/WGFiLCGAKEKB0S7EiCa5
1bNvVn+a7cdDj7FdYf+Dvp5fNZZIus4w+CUlUaiRyDhIfYquz53J1RD1wN5+SQ/I
g6JQRp2gONeqGM5hT+0v2J/wGMmhuI5XO+PtQ1QNGoUnAA4QNof1thYjqdTJxzfz
V2CUSOKnAT/PDcUWoy8BVPDDE+wYTnjTO1j/ZsQvnNQm7r18OiMUn85teLq1JtB+
T3vyVZ2f2gc8lAgkKy5n3NH5fmLVgbO0WXgpWLHNkcp+shZMM6J5J/u/P6B/wk95
DMzQy4slu/UfWMvsaxq+OjejhAtbdiIOeNfF6dAMy2NAyZplEAjlP8dsFrqAdACL
9m/DA4ODAV6OJ3E0zQ0dI4o6kr+/wbPVseLklqn3Ss0dndjU1K9XR0qpC8OruUJq
4h6kl5q6V3BHAoELvBtAqb0yHYdqhLqznpO8HsrUEmU5eTjDaOyyI4HW+AY5GG1R
dtvrCLSiPe0EMartMMtezaB2GxQb9O7e+OI3XL2zVxb1F+QQ+vRZE3zVIdXm+Ev4
oBztF1peZC3c8zurjr7/MxnDSnzynpkSR1zOY8+WJnAqpQ+C1YvdF6/Llwn7IMHw
ZHh6sGzQsaAu7u/DW9yY5w==
=WreO
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20231019' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder
* hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot'
* xlnx devices: remove deprecated device reset
* xlnx-bbram: hw/nvram: Use dot in device type name
* elf2dmp: fix coverity issues
* elf2dmp: convert to g_malloc, g_new and g_free
* target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0
* hw/arm: refactor virt PPI logic
* arm/kvm: convert to kvm_set_one_reg, kvm_get_one_reg
* target/arm: Permit T32 LDM with single register
* smmuv3: Advertise SMMUv3.1-XNX
* target/arm: Implement FEAT_HPMN0
* Remove some unnecessary include lines
* target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL
* hw/timer/npcm7xx_timer: Prevent timer from counting down past zero
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmUxMF4ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oJND/4p64q0Wxq8x8yXCDUZAHME
# lZe2liBPBkqZusGfK0O4CpClwGbM5+8tMeLaRgSOUgJ/WGFiLCGAKEKB0S7EiCa5
# 1bNvVn+a7cdDj7FdYf+Dvp5fNZZIus4w+CUlUaiRyDhIfYquz53J1RD1wN5+SQ/I
# g6JQRp2gONeqGM5hT+0v2J/wGMmhuI5XO+PtQ1QNGoUnAA4QNof1thYjqdTJxzfz
# V2CUSOKnAT/PDcUWoy8BVPDDE+wYTnjTO1j/ZsQvnNQm7r18OiMUn85teLq1JtB+
# T3vyVZ2f2gc8lAgkKy5n3NH5fmLVgbO0WXgpWLHNkcp+shZMM6J5J/u/P6B/wk95
# DMzQy4slu/UfWMvsaxq+OjejhAtbdiIOeNfF6dAMy2NAyZplEAjlP8dsFrqAdACL
# 9m/DA4ODAV6OJ3E0zQ0dI4o6kr+/wbPVseLklqn3Ss0dndjU1K9XR0qpC8OruUJq
# 4h6kl5q6V3BHAoELvBtAqb0yHYdqhLqznpO8HsrUEmU5eTjDaOyyI4HW+AY5GG1R
# dtvrCLSiPe0EMartMMtezaB2GxQb9O7e+OI3XL2zVxb1F+QQ+vRZE3zVIdXm+Ev4
# oBztF1peZC3c8zurjr7/MxnDSnzynpkSR1zOY8+WJnAqpQ+C1YvdF6/Llwn7IMHw
# ZHh6sGzQsaAu7u/DW9yY5w==
# =WreO
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 06:34:22 PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20231019' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits)
contrib/elf2dmp: Use g_malloc(), g_new() and g_free()
hw/timer/npcm7xx_timer: Prevent timer from counting down past zero
target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL
target/arm/common-semi-target.h: Remove unnecessary boot.h include
target/arm/kvm64.c: Remove unused include
target/arm: Implement FEAT_HPMN0
hw/arm/smmuv3: Advertise SMMUv3.1-XNX feature
hw/arm/smmuv3: Sort ID register setting into field order
hw/arm/smmuv3: Update ID register bit field definitions
target/arm: Permit T32 LDM with single register
arm/kvm: convert to kvm_get_one_reg
arm/kvm: convert to kvm_set_one_reg
hw/arm/sbsa-ref: use bsa.h for PPI definitions
include/hw/arm: move BSA definitions to bsa.h
{include/}hw/arm: refactor virt PPI logic
target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0
elf2dmp: check array bounds in pdb_get_file_size
elf2dmp: limit print length for sign_rsds
xlnx-bbram: hw/nvram: Use dot in device type name
xlnx-versal-efuse: hw/nvram: Remove deprecated device reset
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that we can query more than one binary, the "starting QEMU..."
message can get a little noisy. Mute those messages unless we're
running with --verbose.
Only affects qtest_init() calls from within libqtest. The tests
continue to output as usual.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231018192741.25885-13-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Accept the QTEST_QEMU_MACHINE_TYPE environment variable to take a
machine type to use in the tests.
The full machine type is recognized (e.g. pc-q35-8.2). Aliases
(e.g. pc) are also allowed and resolve to the latest machine version
for that alias, or, if using two QEMU binaries, to the latest common
machine version between the two.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-12-farosas@suse.de>
We have strict rules around migration compatibility between different
QEMU versions but no test to validate the migration state between
different binaries.
Add infrastructure to allow running the migration tests with two
different QEMU binaries as migration source and destination.
The code now recognizes two new environment variables
QTEST_QEMU_BINARY_SRC and QTEST_QEMU_BINARY_DST. In the absence of
either of them, the test will use the QTEST_QEMU_BINARY variable. If
both are missing then the tests are run with single binary as
previously.
The machine type is selected automatically as the latest machine type
version that works with both binaries.
Usage (only one of SRC|DST is allowed):
QTEST_QEMU_BINARY_SRC=../build-8.2.0/qemu-system-x86_64 \
QTEST_QEMU_BINARY=../build-8.1.0/qemu-system-x86_64 \
./tests/qtest/migration-test
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-11-farosas@suse.de>
Change the x86_64 to use the q35 machines in tests from now on. Keep
testing the pc macine on 32bit.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-10-farosas@suse.de>
We're about to enable the x86_64 tests to run with the q35 machine,
but that machine does not work with the program we use to dirty the
memory for the tests.
The issue is that QEMU needs to guess the geometry of the "disk" we
give to it and the guessed geometry doesn't pass the sanity checks
done by SeaBIOS. This causes SeaBIOS to interpret the geometry as if
needing a translation from LBA to CHS and SeaBIOS ends up miscomputing
the number of cylinders and aborting due to that.
The reason things work with the "pc" machine is that is uses ATA
instead of AHCI like q35 and SeaBIOS has an exception for ATA that
ends up skipping the sanity checks and ignoring translation
altogether.
Workaround this situation by specifying a geometry in the command
line.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-9-farosas@suse.de>
Stop relying on defaults and select a machine explicitly for every
architecture.
This is a prerequisite for being able to select machine types for
migration using different QEMU binaries for source and destination.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-8-farosas@suse.de>
When using two different QEMU binaries for migration testing, we'll
need to find what is the machine version that will work with both
binaries. Add a helper for that.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-7-farosas@suse.de>
The migration tests are being enhanced to test migration between
different QEMU versions. A requirement of migration is that the
machine type between source and destination matches, including the
version.
We cannot hardcode machine types in the tests because those change
with each release. QEMU provides a machine type alias that has a fixed
name, but points to the latest machine type at each release.
Add a helper to resolve the alias into the exact machine
type. E.g. "-machine pc" resolves to "pc-i440fx-8.2"
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-6-farosas@suse.de>
Add a variant of qtest_has_machine() that receives an environment
variable containing an alternate QEMU binary path.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-5-farosas@suse.de>
We're adding support for using more than one QEMU binary in
tests. Modify qtest_get_machines() to take an environment variable
that contains the QEMU binary path.
Since the function keeps a cache of the machines list in the form of a
static variable, refresh it any time the environment variable changes.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-4-farosas@suse.de>
Add a version of qtest_init() that takes an environment variable
containing the path of the QEMU binary. This allows tests to use more
than one QEMU binary.
If no variable is provided or the environment variable does not exist,
that is not an error. Fallback to using QTEST_QEMU_BINARY.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-3-farosas@suse.de>
We're adding support for testing migration using two different QEMU
binaries. We'll provide the second binary in a new environment
variable.
Allow qtest_qemu_binary() to receive the name of the new variable. If
the new environment variable is not set, that's not an error, we use
QTEST_QEMU_BINARY as a fallback.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-2-farosas@suse.de>
We don't need to check p->quit in the multifd_send_thread() because it
is shadowed by the 'exiting' flag. Ever since that flag was added
p->quit became obsolete as a way to stop the thread.
Since p->quit is set at multifd_send_terminate_threads() under the
p->mutex lock, the thread will only see it once it loops, so 'exiting'
will always be seen first.
Note that setting p->quit at multifd_send_terminate_threads() still
makes sense because we need a way to inform multifd_send_pages() that
the channel has stopped.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012140651.13122-3-farosas@suse.de>
Pass the callback function to add_migration_state_change_notifier so
that migration can initialize the notifier on add and clear it on
delete, which simplifies the call sites. Shorten the function names
so the extra arg can be added more legibly. Hide the global notifier
list in a new function migration_call_notifiers, and make it externally
visible so future live update code can call it.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1686148954-250144-1-git-send-email-steven.sistare@oracle.com>
It's possible that some errors can be overwritten with success retval later
on, and then ignored. Always capture all errors and report.
Reported by Coverity 1522861, but actually I spot one more in the same
function.
Fixes: CID 1522861
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231017203855.298260-1-peterx@redhat.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
The analyze-migration.py script fails on s390x hosts:
Traceback (most recent call last):
File "scripts/analyze-migration.py", line 662, in <module>
dump.read(dump_memory = args.memory)
File "scripts/analyze-migration.py", line 596, in read
classdesc = self.section_classes[section_key]
KeyError: ('s390-storage_attributes', 0)
It obviously never has been adapted to s390x yet, so until this
has been done, disable this test on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018091239.164452-1-thuth@redhat.com>
The analyze-migration.py script fails on s390x hosts:
Traceback (most recent call last):
File "scripts/analyze-migration.py", line 662, in <module>
dump.read(dump_memory = args.memory)
File "scripts/analyze-migration.py", line 596, in read
classdesc = self.section_classes[section_key]
KeyError: ('s390-storage_attributes', 0)
It obviously never has been adapted to s390x yet, so until this
has been done, disable this test on s390x.
Message-ID: <20231018091239.164452-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
KVM_SYNC_GPRS, KVM_SYNC_ACRS, KVM_SYNC_CRS and KVM_SYNC_PREFIX are
available since kernel 3.10. Since we already require at least kernel
3.15 in the s390x KVM code, we can also assume that the KVM_CAP_SYNC_REGS
sync code is always possible for these registers, and remove the
related checks and fallbacks via KVM_SET_REGS and KVM_GET_REGS.
Message-ID: <20231011080538.796999-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we already require at least kernel 3.15 in the s390x KVM code,
we can assume that the KVM_CAP_SYNC_REGS capability is always there.
Thus turn this into a hard requirement now.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20231011080538.796999-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test verifies that QEMU refuses to move a CPU to an
nonexistent location.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-22-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's test that QEMU refuses to setup a dedicated CPU with
low or medium entitlement.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-21-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test verifies that QMP set-cpu-topology does not accept
to overload a socket.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-20-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A dedicated CPU in vertical polarization can only have
a high entitlement.
Let's check this from both host and guest point of view.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-19-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test changes in the entitlement from both a guest and a host point of
view, depending on the polarization.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-18-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Polarization is changed on a request from the guest.
Let's verify the polarization is accordingly set by QEMU.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-17-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduction of the s390x cpu topology core functions and
basic tests.
We test the correlation between the command line and
the QMP results in query-cpus-fast for various CPU topology.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-16-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add some basic examples for the definition of cpu topology
in s390x.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-15-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The query-s390x-cpu-polarization qmp command returns the current
CPU polarization of the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-14-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the guest asks to change the polarization this change
is forwarded to the upper layer using QAPI.
The upper layer is supposed to take according decisions concerning
CPU provisioning.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-13-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
S390 topology adds books and drawers topology containers.
Let's add these to the HMP information for hotpluggable cpus.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-12-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
S390x provides two more topology attributes, entitlement and dedication.
Let's add these CPU attributes to the QAPI command query-cpu-fast.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-11-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The modification of the CPU attributes are done through a monitor
command.
It allows to move the core inside the topology tree to optimize
the cache usage in the case the host's hypervisor previously
moved the CPU.
The same command allows to modify the CPU attributes modifiers
like polarization entitlement and the dedicated attribute to notify
the guest if the host admin modified scheduling or dedication of a vCPU.
With this knowledge the guest has the possibility to optimize the
usage of the vCPUs.
The command has a feature unstable for the moment.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231016183925.2384704-10-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The KVM capability KVM_CAP_S390_CPU_TOPOLOGY is used to
activate the S390_FEAT_CONFIGURATION_TOPOLOGY feature and
the topology facility in the host CPU model for the guest
in the case the topology is available in QEMU and in KVM.
The feature is disabled by default and fenced for SE
(secure execution).
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-9-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the host supports the CPU topology facility, the PTF
instruction with function code 2 is interpreted by the SIE,
provided that the userland hypervisor activates the interpretation
by using the KVM_CAP_S390_CPU_TOPOLOGY KVM extension.
The PTF instructions with function code 0 and 1 are intercepted
and must be emulated by the userland hypervisor.
During RESET all CPU of the configuration are placed in
horizontal polarity.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-8-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
During a subsystem reset the Topology-Change-Report is cleared
by the machine.
Let's ask KVM to clear the Modified Topology Change Report (MTCR)
bit of the SCA in the case of a subsystem reset.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-7-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The maximum nested topology entries is used by the guest to
know how many nested topology are available on the machine.
Let change the MNEST value from 2 to 4 in the SCLP READ INFO
structure now that we support books and drawers.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-6-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On interception of STSI(15.1.x) the System Information Block
(SYSIB) is built from the list of pre-ordered topology entries.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-5-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The topology information are attributes of the CPU and are
specified during the CPU device creation.
On hot plug we:
- calculate the default values for the topology for drawers,
books and sockets in the case they are not specified.
- verify the CPU attributes
- check that we have still room on the desired socket
The possibility to insert a CPU in a mask is dependent on the
number of cores allowed in a socket, a book or a drawer, the
checking is done during the hot plug of the CPU to have an
immediate answer.
If the complete topology is not specified, the core is added
in the physical topology based on its core ID and it gets
defaults values for the modifier attributes.
This way, starting QEMU without specifying the topology can
still get some advantage of the CPU topology.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-4-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
S390 adds two new SMP levels, drawers and books to the CPU
topology.
S390 CPUs have specific topology features like dedication and
entitlement. These indicate to the guest information on host
vCPU scheduling and help the guest make better scheduling decisions.
Add the new levels to the relevant QAPI structs.
Add all the supported topology levels, dedication and entitlement
as properties to S390 CPUs.
Create machine-common.json so we can later include it in
machine-target.json also.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-3-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
