We just need to forward it to quorum's children (except in case of a
rewrite because of corruption), but for that we first have to support
flags in child requests at all.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-6-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-5-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This flag signifies that a write request will not change the visible
disk content. With this flag set, it is sufficient to have the
BLK_PERM_WRITE_UNCHANGED permission instead of BLK_PERM_WRITE.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-4-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently we never actually check whether the WRITE_UNCHANGED
permission has been taken for unchanging writes. But the one check that
is commented out checks both WRITE and WRITE_UNCHANGED; and considering
that WRITE_UNCHANGED is already documented as being weaker than WRITE,
we should probably explicitly document WRITE to include WRITE_UNCHANGED.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-3-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a simple copy-on-read filter driver. It relies on the already
existing COR functionality in the central block layer code, which may be
moved here once we no longer need it there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
userfaultfd support depends on the host kernel, so it may not be
available. If so, 181 and 201 should be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406151731.4285-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, common.qemu only allows to match for results indicating
success. The only way to fail is by provoking a timeout. However,
sometimes we do have a defined failure output and can match for that,
which saves us from having to wait for the timeout in case of failure.
Because failure can sometimes just result in a _notrun in the test, it
is actually important to care about being able to fail quickly.
Also, sometimes we simply do not get any specific output in case of
success. The only way to handle this currently would be to define an
error message as the string to look for, which means that actual success
results in a timeout. This is really bad because it unnecessarily slows
down a succeeding test.
Therefore, this patch adds a new parameter $success_or_failure to
_timed_wait_for and _send_qemu_cmd. Setting this to a non-empty string
makes both commands expect two match parameters: If the first matches,
the function succeeds. If the second matches, the function fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406151731.4285-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have just reduced the refcount cache size to the minimum unless
the user explicitly requests a larger one, so we have to update the
documentation to reflect this change.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: c5f0bde23558dd9d33b21fffc76ac9953cc19c56.1523968389.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The L2 and refcount caches have default sizes that can be overridden
using the l2-cache-size and refcount-cache-size (an additional
parameter named cache-size sets the combined size of both caches).
Unless forced by one of the aforementioned parameters, QEMU will set
the unspecified sizes so that the L2 cache is 4 times larger than the
refcount cache.
This is based on the premise that the refcount metadata needs to be
only a fourth of the L2 metadata to cover the same amount of disk
space. This is incorrect for two reasons:
a) The amount of disk covered by an L2 table depends solely on the
cluster size, but in the case of a refcount block it depends on
the cluster size *and* the width of each refcount entry.
The 4/1 ratio is only valid with 16-bit entries (the default).
b) When we talk about disk space and L2 tables we are talking about
guest space (L2 tables map guest clusters to host clusters),
whereas refcount blocks are used for host clusters (including
L1/L2 tables and the refcount blocks themselves). On a fully
populated (and uncompressed) qcow2 file, image size > virtual size
so there are more refcount entries than L2 entries.
Problem (a) could be fixed by adjusting the algorithm to take into
account the refcount entry width. Problem (b) could be fixed by
increasing a bit the refcount cache size to account for the clusters
used for qcow2 metadata.
However this patch takes a completely different approach and instead
of keeping a ratio between both cache sizes it assigns as much as
possible to the L2 cache and the remainder to the refcount cache.
The reason is that L2 tables are used for every single I/O request
from the guest and the effect of increasing the cache is significant
and clearly measurable. Refcount blocks are however only used for
cluster allocation and internal snapshots and in practice are accessed
sequentially in most cases, so the effect of increasing the cache is
negligible (even when doing random writes from the guest).
So, make the refcount cache as small as possible unless the user
explicitly asks for a larger one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 9695182c2eb11b77cb319689a1ebaa4e7c9d6591.1523968389.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Compressed clusters are not supposed to have the COPIED bit set, but
this is not made explicit in the specs, so let's document it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 74552e1d6e858d3159cb0c0e188e80bc9248e337.1523376013.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Compressed clusters are not supposed to have the COPIED bit set.
"qemu-img check" detects that and prints an error message reporting
the number of the affected host cluster. This doesn't make much sense
because compressed clusters are not aligned to host clusters, so it
would be better to report the offset instead. Plus, the calculation is
wrong and it uses the raw L2 entry as if it was simply an offset.
This patch fixes the error message and reports the offset of the
compressed cluster.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 0f687957feb72e80c740403191a47e607c2463fe.1523376013.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit abd3622cc0 added a case to 122
regarding how the qcow2 driver handles an incorrect compressed data
length value. This does not really fit into 122, as that file is
supposed to contain qemu-img convert test cases, which this case is not.
So this patch splits it off into its own file; maybe we will even get
more qcow2-only compression tests in the future.
Also, that test case does not work with refcount_bits=1, so mark that
option as unsupported.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406164108.26118-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The backup block job directly accesses the driver field in BlockJob. Add
a wrapper for getting it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This gets us rid of more direct accesses to BlockJob fields from the
job drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
All block job drivers support .set_speed and all of them duplicate the
same code to implement it. Move that code to blockjob.c and remove the
now useless callback.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Every block job has a RateLimit, and they all do the exact same thing
with it, so it should be common infrastructure. Move the struct field
for a start.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Block job drivers are not expected to mess with the internals of the
BlockJob object, so provide wrapper functions for one of the cases where
they still do it: Updating the progress counter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Every job gets a non-NULL job->txn on creation, but it doesn't
necessarily keep it until it is decommissioned: Finalising a job removes
it from its transaction. Therefore, calling 'blockdev-job-finalize' a
second time on an already concluded job causes an assertion failure.
Remove job->txn from the assertion in block_job_finalize() to fix this.
block_job_do_finalize() still has the same assertion, but if a job is
already removed from its transaction, block_job_apply_verb() will
already error out before we run into that assertion.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
When we've reached the concluded state, we need to expose the error
state if applicable. Add the new field.
This should be sufficient for determining if a job completed
successfully or not after concluding; if we want to discriminate
based on how it failed more mechanically, we can always add an
explicit return code enumeration later.
I didn't bother to make it only show up if we are in the concluded
state; I don't think it's necessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QMP version of this command can take a qdev ID since 7a9877a026,
but the HMP version is still using the deprecated block device name so
there's no way to refer to a block device added like this:
-blockdev node-name=disk0,driver=qcow2,file.driver=file,file.filename=hd.qcow2
-device virtio-blk-pci,id=virtio-blk-pci0,drive=disk0
This patch works around this problem by using the specified name as a
qdev ID if the block device name is not found.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too many driver callback interfaces; simplify the mess
somewhat by merging the flags parameter of .bdrv_co_writev_flags()
into .bdrv_co_writev(). Note that as long as a driver doesn't set
.supported_write_flags, the flags argument will be 0 and behavior is
identical. Also note that the public function bdrv_co_writev() still
lacks a flags argument; so the driver signature is thus intentionally
slightly different. But that's not the end of the world, nor the first
time that the driver interface differs slightly from the public
interface.
Ideally, we should be rewriting all of these drivers to use modern
byte-based interfaces. But that's a more invasive patch to write
and audit, compared to the simplification done here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all drivers with aio callbacks are using the
byte-based interfaces, we can remove the sector-based versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the vxhs driver.
Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, as I don't know if VxHS is tolerant of
non-sector AIO operations, I went with the conservative approach
of adding .bdrv_refresh_limits to override the block layer
defaults back to the pre-patch value of 512.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the rbd driver.
Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, as I don't know if RBD is tolerant of
non-sector AIO operations, I went with the conservate approach
of adding .bdrv_refresh_limits to override the block layer
defaults back to the pre-patch value of 512.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the null-co and null-aio drivers.
Note that since the null driver does nothing on writes, it trivially
supports the BDRV_REQ_FUA flag (all writes have already landed to
the same bit-bucket without needing an extra flush call). Also, since
the null driver does just as well with byte-based requests, we can
now avoid cycles wasted on read-modify-write by taking advantage of
the block layer now defaulting the alignment to 1 instead of 512.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the file-win32 driver.
Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, as I don't know if Windows is tolerant of
non-sector AIO operations, I went with the conservative approach
of modifying .bdrv_refresh_limits to override the block layer
defaults back to the pre-patch value of 512.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Add new sector-based aio callbacks for read and write,
to match the fact that bdrv_aio_pdiscard is already byte-based.
Ideally, drivers should be converted to use coroutine callbacks
rather than aio; but that is not quite as trivial (and if we were
to do that conversion, the null-aio driver would disappear), so for
the short term, converting the signature but keeping things with
aio is easier. However, we CAN declare that a driver that uses
the byte-based aio interfaces now defaults to byte-based
operations, and must explicitly provide a refresh_limits override
to stick with larger alignments (making the alignment issues more
obvious directly in the drivers touched in the next few patches).
Once all drivers are converted, the sector-based aio callbacks will
be removed; in the meantime, a FIXME comment is added due to a
slight inefficiency that will be touched up as part of that later
cleanup.
Simplify some instances of 'bs->drv' into 'drv' while touching this,
since the local variable already exists to reduce typing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_get_aio_context verifies if BlockDriverState bs is not NULL,
return bdrv_get_aio_context(bs) if true or qemu_get_aio_context()
otherwise. However, bdrv_get_aio_context from block.c already does
this verification itself, also returning qemu_get_aio_context()
if bs is NULL:
AioContext *bdrv_get_aio_context(BlockDriverState *bs)
{
return bs ? bs->aio_context : qemu_get_aio_context();
}
This patch simplifies blk_get_aio_context to simply call
bdrv_get_aio_context instead of replicating the same logic.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes an issue by adding bounds checking to multi-byte packets
where the PS/2 mouse data stream may become corrupted due to data being
discarded when the PS/2 ringbuffer is full.
Interrupts for Multi-byte responses are postponed until the final byte
has been queued.
These changes fix a bug where windows guests drop the mouse device
entirely requring the guest to be restarted.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150310.2FEA0381924@moya.office.hostfission.com>
[ kraxel: codestyle fixes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows guest's to correctly reinitialize and identify the mouse
should the guest decide to re-scan or reset during mouse input events.
When the guest sends the "Identify" command, due to the PC's hardware
architecutre it is impossible to reliably determine the response from
the command amongst other streaming data, such as mouse or keyboard
events. Standard practice is for the guest to disable the device and
then issue the identify command, so this must be obeyed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150303.7486B381924@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The F10 key is used in various applications, disable it unconditionally
(do not limit it to grab mode). Note that this property is deprecated
and might be removed in the future (GTK+ commit b082fb598d).
Fixes: https://bugs.launchpad.net/qemu/+bug/1726910
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180510230739.28459-2-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add comments to the cases not (yet) switched
over to parse_display_qapi().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-5-kraxel@redhat.com
Drop the gtk option parser from parse_display(), so parse_display_qapi()
will handle it instead.
With this change the parser will accept gl=core and gl=es too, gtk
must catch the unsupported gles variant now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-4-kraxel@redhat.com
Drop the option-less display types (egl-headless, curses, none) from
parse_display(), so they'll be handled by parse_display_qapi().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180507095539.19584-3-kraxel@redhat.com
Add parse_display_qapi() function which parses the -display command line
using a qapi visitor for DisplayOptions. Wire up as default catch in
parse_display().
Improves the error message for unknown display types.
Also enables json as -display argument, i.e. -display "{ 'type': 'gtk' }"
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180507095539.19584-2-kraxel@redhat.com
Set magic cookie on initialization. Clear on cleanup. Sprinkle a bunch
of assert()s checking the cookie, to verify the pointer is valid.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507102254.12107-1-kraxel@redhat.com
The commit referenced below changed the logic by causing the gtk-egl
backend to be initialized regardless of whether GtkGlArea initialization
succeeded. This causes eglInitialize to crash in Wayland systems without
XWayland.
This patch restores the previous logic.
Fixes: 4c70280592 ("ui/gtk: use GtkGlArea on wayland only")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Message-id: 20180507134237.14996-1-tomeu.vizoso@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Saves some space and disables the F10 button as side-effect.
Fixes: https://bugs.launchpad.net/qemu/+bug/1726910
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-Id: <20180510230739.28459-1-peter@lekensteyn.nl>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Max Reitz
Alberto Garcia
Kevin Wolf
John Snow
Eric Blake
Daniel Henrique Barboza
Peter Maydell
Geoffrey McRae
Peter Wu
Gerd Hoffmann
Tomeu Vizoso
Richard Henderson