When implementing spice vdagent protocol in qemu we only need the
spice-protocol package for that, spice-server is not needed. So
go split those two build dependencies.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210519053940.1888907-1-kraxel@redhat.com
Message-Id: <20210519053940.1888907-2-kraxel@redhat.com>
Otherwise you run into hilarity like trying when cross compiling a 32
bit ARM build on a 64 bit system trying to use host_cc to build 32 bit
test cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-32-alex.bennee@linaro.org>
this is needed by the tricore-tcg-tests as tricore-gcc is not easily
available. Thus we rely on the HOST_CC to do the preprocessing of the
tricore assembly files.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-6-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-16-alex.bennee@linaro.org>
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCblEEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObnQgAj10pRDODY9hIiUiYj2sTcEQTly3p
DC+ZWDaup67z3WV2C/vAS/x31RGIus+7bzji3fgtUcnGOr7sbuOCcs7CPY8mam5Y
GMPNrsUk2sZ5z9SVTq2vjEa61tjxtMpYXx9pnhgJzJAO4NJzNuX74ZdpA+oV5aTC
CvZDk8lC7BLU16MfeLcbw44xE4Oy05wWwaoP2pvhdOg47y85t/S9Il1yBCYi3y8C
pTOBBCYmHGPj/r7i4MhUGrAjIyGQu1w7av8nZXouRegoeVl28RKR8+pl7TfFpt+E
cp95yE8dPuNFJnCiZ3Kv01eBcSUcyp4gVb5H2Oa/nkkYRLpnONbUzYFtIA==
=zR5U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
coverity-scan: list components, move model to scripts/coverity-scan
configure: fix detection of gdbus-codegen
qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
main-loop: remove dead code
target/i386: use mmu_translate for NPT walk
target/i386: allow customizing the next phase of the translation
target/i386: extend pg_mode to more CR0 and CR4 bits
target/i386: pass cr3 to mmu_translate
target/i386: extract mmu_translate
target/i386: move paging mode constants from SVM to cpu.h
target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
accel: add init_accel_cpu for adapting accel behavior to CPU type
accel: move call to accel_init_interfaces
i386: make cpu_load_efer sysemu-only
target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
target/i386: gdbstub: introduce aux functions to read/write CS64 regs
i386: split off sysemu part of cpu.c
i386: split seg_helper into user-only and sysemu parts
i386: split svm_helper into sysemu and stub-only user
i386: separate fpu_helper sysemu-only parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"pkg-config --variable=gdbus_codegen gio-2.0" returns "gdbus-codegen",
and it does not pass test -x (which does not walk the path).
Meson 0.58.0 notices that something is iffy, as the dbus_vmstate1
assignment in tests/qtest/meson.build uses an empty string as the
command, and fails very eloquently:
../tests/qtest/meson.build:92:2: ERROR: No program name specified.
Use the "has" function instead of test -x, and fix the generation
of config-host.mak since meson.build expects that GDBUS_CODEGEN
is absent, rather than empty, if the tool is unavailable.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: #178
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix ECKD booting with null block numbers in the chain
-----BEGIN PGP SIGNATURE-----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=Gg+4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10' into staging
* Make the s390-ccw bios compilable with Clang
* Fix ECKD booting with null block numbers in the chain
# gpg: Signature made Mon 10 May 2021 08:27:34 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10:
pc-bios/s390: Update the s390-ccw bios binaries with the Clang and other fixes
pc-bios/s390-ccw: Allow building with Clang, too
pc-bios/s390-ccw: Silence GCC 11 stringop-overflow warning
pc-bios/s390-ccw: Fix the cc-option macro in the Makefile
pc-bios/s390-ccw: Silence warning from Clang by marking panic() as noreturn
pc-bios/s390-ccw/netboot: Use "-Wl," prefix to pass parameter to the linker
pc-bios/s390-ccw: Use reset_psw pointer instead of hard-coded null pointer
pc-bios/s390-ccw/bootmap: Silence compiler warning from Clang
pc-bios/s390-ccw: don't try to read the next block if end of chunk is reached
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Usually Meson uses pre-serialized information in meson-private to
speed up re-runs. This is not possible for version changes, where
Meson instead rebuilds the serialized information using cmd_line.txt.
In some cases cmd_line.txt can contain stale information, since it
is not rebuild except when "meson setup" is invoked. Update it in
the configure script to allow upgrading our Meson version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
Commit "c87ea11631 configure: add --without-default-features" use
default_feature to set default values for configure option. This value
is used for EXESUF too.
However, EXESUF is not option to be tested, it is just append to any
binary name so using --without-default-features set EXESUF to "n"o and
all binaries using it has form <name>no (e.g. qemu-imgno).
This is not expected behavior as disabling features should not cause
generating different binary names.
Reverting back to setting EXESUF to empty value unless needed otherwise.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210331081845.105089-1-mrezanin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test for 128-bit atomics is causing trouble with FreeBSD 12.2 and
--enable-werror:
cc -Werror -fPIE -DPIE -std=gnu99 -Wall -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wno-initializer-overrides -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-string-plus-int -Wno-typedef-redefinition -Wno-tautological-type-limit-compare -fstack-protector-strong -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -pie -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong
config-temp/qemu-conf.c:4:7: error: implicit declaration of function '__atomic_load_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:5:3: error: implicit declaration of function '__atomic_store_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_store_16(&x, y, 0);
^
config-temp/qemu-conf.c:5:3: note: did you mean '__atomic_load_16'?
config-temp/qemu-conf.c:4:7: note: '__atomic_load_16' declared here
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:6:3: error: implicit declaration of function '__atomic_compare_exchange_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
^
3 errors generated.
Looking for they way we are using atomic functions in QEMU, we are not
using these functions with the _16 suffix anyway. Switch to the same
functions that we use in the include/qemu/atomic.h header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210317110512.583747-2-thuth@redhat.com>
Message-Id: <20210323165308.15244-12-alex.bennee@linaro.org>
In bbc17caf81, we used an alias attribute to allow target_page
to be declared const, and yet be initialized late.
This fails when using LTO with several versions of gcc.
The compiler looks through the alias and decides that the const
variable is statically initialized to zero, then propagates that
zero to many uses of the variable.
This can be avoided by compiling one object file with -fno-lto.
In this way, any initializer cannot be seen, and the constant
propagation does not occur.
Since we are certain to have this separate compilation unit, we
can drop the alias attribute as well. We simply have differing
declarations for target_page in different compilation units.
Drop the use of init_target_page, and drop the configure detection
for CONFIG_ATTRIBUTE_ALIAS.
In order to change the compilation flags for a file with meson,
we must use a static_library. This runs into specific_ss, where
we would need to create many static_library instances.
Fix this by splitting page-vary.c: the page-vary-common.c part is
compiled once as a static_library, while the page-vary.c part is
left in specific_ss in order to handle the target-specific value
of TARGET_PAGE_BITS_MIN.
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210321211534.2101231-1-richard.henderson@linaro.org>
[PMD: Fix typo in subject, split original patch in 3]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20210322112427.4045204-4-f4bug@amsat.org>
[rth: Update MAINTAINERS]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
local directive make the configure fails on these systems.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqy95D8X-QvBcEfL=a-Rkgy6aJtheskkqZwQkreru+T_Wg@mail.gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now, compilation of util/dbus is implicit and depends
on libgio presence on the building host.
The patch adds options to manage libgio dependencies explicitly.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210312151440.405776-1-den-plotnikov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This has the following visible changes:
- GBM is required only for OpenGL dma-buf.
- X11 is explicitly required by gtk-egl.
- EGL is now mandatory for the OpenGL displays.
The last one needs some detailed description. Before this change,
EGL was tested only for OpenGL dma-buf with the check of
EGL_MESA_image_dma_buf_export. However, all of the OpenGL
displays depend on EGL and EGL_MESA_image_dma_buf_export is always
defined by epoxy's EGL interface.
Therefore, it makes more sense to always check the presence of EGL
and say the OpenGL displays are available along with OpenGL dma-buf
if it is present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210223060307.87736-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With --enable-fuzzing, QEMU_CFLAGS include -fsanitize=fuzzer-no-link.
This should allow us to build non-fuzzer binaries using objects
instrumented for fuzzing. However, to do that, we also need to link with
-fsanitize=fuzzer-no-link. We were not doing that.
Reported-by: Li Qiang <liq3ea@163.com>,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210221174510.22542-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add configuration options to enable or disable multiprocess QEMU code
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cc37253e35418ebd7b675a31a3df6e3c7a12dc1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Users might want to enable all features, without realizing some
features have negative effect. Mention the TCI feature is slow
and experimental, hoping it will be selected knowingly.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210125144530.2837481-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SVE, currently the bulk of the GDB TCG tests, we need at least GDB
9.1 to support the "ieee_half" data type we report. This only affects
when GDB tests are run; users can still use lower versions of gdb as
long as they aren't talking to an SVE enabled model. The work around
is to either get a newer gdb or disable SVE for their CPU model.
Reported-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210202134001.25738-9-alex.bennee@linaro.org>
When checking GDB versions we have to tolerate all sorts of random
distro extensions to the version string. While we already attempt to
do some of that before we call version_ge is makes sense to try and
regularise the first input by stripping extraneous -'s. While we at it
convert the old-style shell quoting into a cleaner form t shut up my
editors linter lest it confuse me by underlining the whole line.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210202134001.25738-8-alex.bennee@linaro.org>
The configure option was backward, and we failed to
pass the value on to meson.
Fixes: 23a77b2d18 ("build-system: clean up TCG/TCI configury")
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A workaround added in early days of 64-bit OSX forced x86_64 if the
host machine had 64-bit support. This creates issues when cross-
compiling for ARM64. Additionally, the user can always use --cpu=* to
manually set the host CPU and therefore this workaround should be
removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-12-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On iOS there is no CoreAudio, so we should not assume Darwin always
has it.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-11-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-9-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add objc to the Meson cross file as well as detection of Darwin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-8-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Meson will find CoreFoundation, IOKit, and Cocoa as needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-7-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The iOS toolchain does not use the host prefix naming convention. So we
need to enable cross-compile options while allowing the PREFIX to be
blank.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-3-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the preadv availability check to meson.build. This is what we
want to be doing for host-OS-feature-checks anyway, but it also fixes
a problem with building for macOS with the most recent XCode SDK on a
Catalina host.
On that configuration, 'preadv()' is provided as a weak symbol, so
that programs can be built with optional support for it and make a
runtime availability check to see whether the preadv() they have is a
working one or one which they must not call because it will
runtime-assert. QEMU's configure test passes (unless you're building
with --enable-werror) because the test program using preadv()
compiles, but then QEMU crashes at runtime when preadv() is called,
with errors like:
dyld: lazy symbol binding failed: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
dyld: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
Meson's own function availability check has a special case for macOS
which adds '-Wl,-no_weak_imports' to the compiler flags, which forces
the test to require the real function, not the macOS-version-too-old
stub.
So this commit fixes the bug where macOS builds on Catalina currently
require --disable-werror.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210126155846.17109-1-peter.maydell@linaro.org
Since meson switch and commit feabc71dfa ("configure: do not include
dependency flags in QEMU_CFLAGS and LIBS"), LIBS is unused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210114125605.1227742-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make CONFIG_TCG_INTERPRETER a Meson option, and enable TCI (though with
a warning) if the host CPU is unsupported, making it more similar to
other --enable-* options.
Remove TCG-specific include paths from !CONFIG_TCG builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two cases that need to be accounted for when compiling QEMU
for MinGW32:
1) A standalone distribution, where QEMU is self contained and
extracted by the user, such as a user would download from the QEMU
website. In this case, all the QEMU executable files should be
rooted in $prefix to ensure they can be easily found by the user
2) QEMU integrated into a distribution image/sysroot/SDK and
distributed with other programs. In this case, the provided
arguments for bindir/datadir/etc. should be respected as they for a
Linux build.
Restructures the MinGW path configuration so that all of the paths
except bindir use the same rules as when building for other platforms.
This satisfies #2 and #1 since these files do not need to be directly in
$prefix anyway.
The handling for --bindir is changed so that it defaults to $prefix on
MinGW (maintaining the compatibility with #1), but if the user specifies
a specific path when configuring it can also satisfy #2.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Message-Id: <20210112210239.28836-1-JPEWhacker@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is not a part of standard time.h. Glibc put it under
time.h however musl treat it as a sys timex extension.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210118063808.12471-2-jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The support of socket based debugging which we need for linux-user
testing is only really stable as of 8.3.1 so lets gate our use of GDB
on having a relatively modern version.
For direct testing you can just point to a locally compiled version of
gdb via configure, e.g.:
../../configure --gdb=$HOME/src/binutils-gdb.git/builds/all/install/bin/gdb
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108224256.2321-4-alex.bennee@linaro.org>
Make config.status generation a bit more robust. (The quote_sh
function will also be reused to parse configure's command line
arguments in an external script driven by Meson build option
introspection).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cocoa UI code currently assumes it is always the active UI
and does not interact well with other UI frontend code. Move
the relevant checks to Meson now that all other frontends
have become Meson options. This way, SDL/GTK+/Cocoa can be
parsed entirely by scripts/configure-parse-buildoptions.pl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also allows removing CONFIG_NEED_X11, all the ingredients
can be computed easily in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now move the logic verbatim. GTK+ actually has a hard requirement
on X11 if gtk+x11 is present, but we will sort that out later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_GTK_GL is defined if OpenGL is present and GTK+
is 3.16 or newer. Since GTK+ 3.22 is the minimum supported
version, just use CONFIG_OPENGL instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the automagic connection between --enable-cocoa
and enabling coreaudio in audio_drv_list. It can be
overridden anyway just by placing --enable-cocoa before
--audio-drv-list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cURL 7.16.0 was released in October 2006. Just remove code that is
in all likelihood not being used anywhere, and require the oldest version
found in currently supported distros, which is 7.29.0 from CentOS 7.
pkg-config is enough for QEMU, since it does not need extra information
such as the path for certicate authorities. All supported platforms
today will all have pkg-config for curl, so we can drop curl-config.
Suggested-by: Daniel Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
version.rc can just use existing preprocessor symbols.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson understands -Dslirp=enabled, so there is no reason not to
accept the configure option as well.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The condition can be tested also from $targetos, clean up.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson.build is already doing the same check, so remove it from
configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a flag to enable/disable control flow integrity checks
on indirect function calls.
This feature only allows indirect function calls at runtime to functions
with compatible signatures.
This feature is only provided by LLVM/Clang, and depends on link-time
optimization which is currently supported only with LLVM/Clang >= 6.0
We also add an option to enable a debugging version of cfi, with verbose
output in case of a CFI violation.
CFI on indirect function calls does not support calls to functions in
shared libraries (since they were not known at compile time), and such
calls are forbidden. QEMU relies on dlopen/dlsym when using modules,
so we make modules incompatible with CFI.
All the checks are performed in meson.build. configure is only used to
forward the flags to meson
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-5-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows to compile QEMU with link-time optimization (LTO).
Compilation with LTO is handled directly by meson. This patch only
adds the option in configure and forwards the request to meson
Tested with all major versions of clang from 6 to 12
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-2-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default QEMU enables a lot of features if it can probe and find the
support libraries. It also enables a bunch of features by default.
This patch adds the ability to build --without-default-features which
can be paired with a --without-default-devices for a barely functional
build.
The main use case for this is testing our build assumptions and for
minimising the amount of stuff you build if you just want to test a
particular feature on your relatively slow emulated test system. On
it's own I go from:
$ ls -lh qemu-system-aarch64
-rwxr-xr-x 1 alex alex 120M Dec 10 12:45 qemu-system-aarch64*
$ ldd qemu-system-aarch64 | wc -l
170
to:
$ ls -lh qemu-aarch64
-rwxr-xr-x 1 alex alex 43M Dec 10 12:41 qemu-aarch64*
$ ldd qemu-system-aarch64 | wc -l
57
which is still able to run my default Debian ARM64 machine with a lot
less fat involved.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201210190417.31673-5-alex.bennee@linaro.org>
This will allow meson to honour -Dauto_features=disabled later.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201210190417.31673-4-alex.bennee@linaro.org>
Coverity always complains about switch-case statements that fall through
the next one when there is no comment in between - which could indicate
a forgotten "break" statement. Instead of handling these issues after
they have been committed, it would be better to avoid them in the build
process already. Thus let's enable the -Wimplicit-fallthrough warning now.
The "=2" level seems to be a good compromise between being too strict and
too generic about the possible comments, so we'll start with "=2" for now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201211152426.350966-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Recent binutils changes dropping unsupported options [1] caused a build
issue in regard to the optionroms.
ld -m elf_i386 -T /<<PKGBUILDDIR>>/pc-bios/optionrom//flat.lds -no-pie \
-s -o multiboot.img multiboot.o
ld.bfd: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
This isn't really a regression in ld.bfd, filing the bug upstream
revealed that this never worked as a ld flag [2] - in fact it seems we
were by accident setting --nmagic).
Since it never had the wanted effect this usage of LDFLAGS_NOPIE, should be
droppable without any effect. This also is the only use-case of LDFLAGS_NOPIE
in .mak, therefore we can also remove it from being added there.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=983d925d
[2]: https://sourceware.org/bugzilla/show_bug.cgi?id=27050#c5
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20201214150938.1297512-1-christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_BTRFS_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-7-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_SYS_KCOV_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-6-thuth@redhat.com>
[lv: s/signal/kcov/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The code that used HAVE_IFADDRS_H has been removed in commit
0a27af918b ("io: use bind() to check for IPv4/6 availability"),
so we don't need this check in the configure script anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
configure doesn't detect if $make is installed on the build host.
This is also helpful for hosts where an alias for make is used, i.e.
configure would fail if gmake is not present on macOS.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200825202755.50626-5-r.bolshakov@yadro.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a relatively new feature in libfuse (available since 3.8.0,
which was released in November 2019), so we have to add a dedicated
check whether it is available before making use of it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since meson.git#0240d760c7699a059cc89e584363c6431cdd2b61 setuptools is not required anymore.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201124211925.4194-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU binaries no longer launch successfully with recent SystemTap
releases. This is because modular QEMU builds link the sdt semaphores
into the main binary instead of into the shared objects where they are
used. The symbol visibility of semaphores is 'hidden' and the dynamic
linker prints an error during module loading:
$ ./configure --enable-trace-backends=dtrace --enable-modules ...
...
Failed to open module: /builddir/build/BUILD/qemu-4.2.0/s390x-softmmu/../block-curl.so: undefined symbol: qemu_curl_close_semaphore
The long-term solution is to generate per-module dtrace .o files and
link them into the module instead of the main binary.
In the short term we can define STAP_SDT_V2 so dtrace(1) produces a .o
file with 'default' symbol visibility instead of 'hidden'. This
workaround is small and easier to merge for QEMU 5.2 and downstream
backports.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1898700
Cc: wcohen@redhat.com
Cc: fche@redhat.com
Cc: kraxel@redhat.com
Cc: rjones@redhat.com
Cc: ddepaula@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20201119141457.844452-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
-----BEGIN PGP SIGNATURE-----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=A3/B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging
* Fixes for compiling on Haiku, and add Haiku VM for compile-testing
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
# gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-17:
max111x: put it into the 'misc' category
nand: put it into the 'storage' category
ads7846: put it into the 'input' category
ssd0323: put it into the 'display' category
gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com
target/microblaze: Fix possible array out of bounds in mmu_write()
tests/vm: update NetBSD to 9.1
tests/vm: Add Haiku test based on their vagrant images
configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h
configure: Do not build pc-bios/optionrom on Haiku
configure: Fix the _BSD_SOURCE define for the Haiku build
qemu/bswap: Remove unused qemu_bswap_len()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 76346b6264 we tried to add a configure check that
the libgio pkg-config data was correct, which builds an executable
linked against it. Unfortunately this doesn't catch the problem
(missing static library dependency info), because a "do nothing" test
source file doesn't have any symbol references that cause the linker
to pull in .o files from libgio.a, and so we don't see the "missing
symbols from libmount" error that a full QEMU link triggers.
(The ineffective test went unnoticed because of a typo that
effectively disabled libgio unconditionally, but after commit
3569a5dfc1 fixed that, a static link of the system emulator on
Ubuntu stopped working again.)
Improve the gio test by having the test source fragment reference a
g_dbus function (which is what is indirectly causing us to end up
wanting functions from libmount).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201116104617.18333-1-peter.maydell@linaro.org
Compilation of pc-bios/optionrom fails on Haiku with:
BUILD pvh.img
ld: pvh_main.o: in function `pvh_load_kernel':
pc-bios/optionrom/pvh_main.c:73: undefined reference to `GLOBAL_OFFSET_TABLE_'
Makefile:57: recipe for target 'pvh.img' failed
make[1]: *** [pvh.img] Error 1
Let's simply disable it, like it is already done on macOS and Solaris.
Message-Id: <20201114165137.15379-3-thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Haiku VM that we are going to add is using _BSD_SOURCE instead
of BSD_SOURCE (without initial underscore)... according to David
Carlier, the BSD_SOURCE without underscore was likely a typo, so
let's simply add the underscore there now.
This fixes the build failure with the bswapXX() macros not being
defined after including <endian.h>.
Message-Id: <20201114165137.15379-2-thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com
Signed-off-by: Thomas Huth <thuth@redhat.com>
The vhost-user protocol uses the Linux eventfd feature and is typically
connected to Linux kvm.ko ioeventfd and irqfd file descriptors. The
protocol specification in docs/interop/vhost-user.rst does not describe
how platforms without eventfd support work.
The QEMU vhost-user devices compile on other POSIX host operating
systems because eventfd usage is abstracted in QEMU. The libvhost-user
programs in contrib/ do not compile but we failed to notice since they
are not built by default.
Make it clear that vhost-user is only supported on Linux for the time
being. If someone wishes to support it on other platforms then the
details can be added to vhost-user.rst and CI jobs can test the feature
to prevent bitrot.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The --enable/disable-vhost-user-blk-server options were implemented in
./configure. There has been confusion about them and part of the problem
is that the shell syntax used for setting the default value is not easy
to read. Move the option over to meson where the conditions are easier
to understand:
have_vhost_user_blk_server = (targetos == 'linux')
if get_option('vhost_user_blk_server').enabled()
if targetos != 'linux'
error('vhost_user_blk_server requires linux')
endif
elif get_option('vhost_user_blk_server').disabled() or not have_system
have_vhost_user_blk_server = false
endif
This patch does not change behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Show the targets but keep them separate from the main list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201029201449.6926-1-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+i9YMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpySQH/Ru/sxB9PncR1HsqSf0HC0tt/EMKgyZTXEwQ
FITcjkCvBDS98a1VUvvZbjzTEDEZNnoUv94MjdLeBoptJ7GtK6nPoI6Ke0p1Zqbe
mlY2BCb0FpN8FE+mthjAI03mhw6o8Qo/OPtyISQzUxCVVqUHL5TRAVAQdeidoK8n
RBQ4WogwM/h7wI0d9GGgSxAON8IRQnBYImtzJieBb6zeScwKVFTWI1tqBdOyFN0/
AhzQiNZuhZ7a1XGJIsxmWB1NK2kcXNJuOF0ANh4coIHR0JzmH3xRy+Jnf5e3dYsw
LI23DUZPSTJJXAwKPucyTG7RTX8F55N9DVHC9KDRD6Ntq1oreJ4=
=pcbN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make it possible to compile out the vhost-user-blk server. It is enabled
by default on Linux.
Note that vhost-user-server.c depends on libvhost-user, which requires
CONFIG_LINUX. The CONFIG_VHOST_USER dependency was erroneous since that
option controls vhost-user frontends (previously known as "master") and
not device backends (previously known as "slave").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The gio library detection code no longer works, due to a missing $ in
front of the gio_libs reference. Make the string be $gio_libs.
Fixes: 76346b6264 ("configure: Test that gio libs from pkg-config
work")
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20201103145121.668865-1-brogers@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson 0.56.0 correctly builds non-PIC static libraries with -fPIE if
b_pie=true. We do not have to pass b_staticpic=true if PIE is requested
if Meson is new-enough, which improves performance.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On some hosts (eg Ubuntu Bionic) pkg-config returns a set of
libraries for gio-2.0 which don't actually work when compiling
statically. (Specifically, the returned library string includes
-lmount, but not -lblkid which -lmount depends upon, so linking
fails due to missing symbols.)
Check that the libraries work, and don't enable gio if they don't,
in the same way we do for gnutls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200928160402.7961-1-peter.maydell@linaro.org
Currently it is unknown whether virtiofsd will be built at
configuration time. It will be automatically built when dependency
is met. Also, required libraries are not clear.
To make this clear, add configure option --{enable,disable}-virtiofsd.
The default is the same as current (enabled if available) like many
other options. When --enable-virtiofsd is given and dependency is not
met, we get:
ERROR: Problem encountered: virtiofsd requires libcap-ng-devel and seccomp-devel
or
ERROR: Problem encountered: virtiofsd needs tools and vhost-user support
In addition, configuration summary now includes virtiofsd entry:
build virtiofs daemon: YES/NO
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Message-Id: <20201008103133.2722903-1-misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson has a localedir option, so passing the path through that option
is the cleanest way when we move directories out of config-host.mak.
In preparation for doing that without changing semantics and without
special-casing localedir code, add a configure option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no references in only file which includes xenguest.h
to any xen definitions. And there's no references to -lxenguest
in qemu, either. Drop it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200727140048.19779-1-mjt@msgid.tls.msk.ru>
[perard: rebased]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201015220626.418-4-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit ca8c0909f0 changed qemu_docdir to be docdir, then later uses the
qemu_docdir name in the final assignment. Unfortunately, one instance of
qemu_docdir was missed: the one which comes from the --docdir parameter.
This patch restores the proper handling of the --docdir parameter.
Fixes: ca8c0909f0 ("configure: build docdir like other suffixed
directories")
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201015190742.270629-1-brogers@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initially, libudev detection was bundled with --enable-mpath because
qemu-pr-helper was the only user of libudev. Recently however the USB
U2F emulation has also started using libudev, so add a separate
option. This also allows 1) disabling libudev if desired for static
builds and 2) for non-static builds, requiring libudev even if
multipath support is undesirable.
The multipath test is adjusted, because it is now possible to enter it
with configurations that should fail, such as --static --enable-mpath
--disable-libudev.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Confusingly, QEMU_INCLUDES is not used by configure tests. Moving
it to meson.build ensures that Windows paths are specified instead of
the msys paths like /c/Users/...
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This thread from a little over a year ago:
http://lists.wpkg.org/pipermail/sheepdog/2019-March/thread.html
states that sheepdog is no longer actively developed. The only mentioned
users are some companies who are said to have it for legacy reasons with
plans to replace it by Ceph. There is talk about cutting out existing
features to turn it into a simple demo of how to write a distributed
block service. There is no evidence of anyone working on that idea:
https://github.com/sheepdog/sheepdog/commits/master
No real commits to git since Jan 2018, and before then just some minor
technical debt cleanup.
There is essentially no activity on the mailing list aside from
patches to QEMU that get CC'd due to our MAINTAINERS entry.
Fedora packages for sheepdog failed to build from upstream source
because of the more strict linker that no longer merges duplicate
global symbols. Fedora patches it to add the missing "extern"
annotations and presumably other distros do to, but upstream source
remains broken.
There is only basic compile testing, no functional testing of the
driver.
Since there are no build pre-requisites the sheepdog driver is currently
enabled unconditionally. This would result in configure issuing a
deprecation warning by default for all users. Thus the configure default
is changed to disable it, requiring users to pass --enable-sheepdog to
build the driver.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201002113243.2347710-3-berrange@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We remove the CONFIG_LOCALTIME_R detection option in configure, and move the check
existence of gmtime_r from configure into C header and source directly by using macro
`_POSIX_THREAD_SAFE_FUNCTIONS`.
Before this patch, the configure script are always assume the compiler doesn't define
_POSIX_C_SOURCE macro at all, but that's not true, because thirdparty library such
as ncursesw may define -D_POSIX_C_SOURCE in it's pkg-config file. And that C Flags will
added -D_POSIX_C_SOURCE into each QEMU_CFLAGS. And that's causing the following compiling error:
n file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_gpio_zaurus.c.obj
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_dma_xilinx_axidma.c.obj
After this patch, whenever ncursesw or other thirdparty libraries tried to define or not
define _POSIX_C_SOURCE, the source will building properly. Because now, we don't make any
assumption if _POSIX_C_SOURCE are defined. We solely relied on if the macro `_POSIX_THREAD_SAFE_FUNCTIONS`
are defined in msys2/mingw header.
The _POSIX_THREAD_SAFE_FUNCTIONS are defined in mingw header like this:
```
#if defined(_POSIX_C_SOURCE) && !defined(_POSIX_THREAD_SAFE_FUNCTIONS)
#define _POSIX_THREAD_SAFE_FUNCTIONS 200112L
#endif
#ifdef _POSIX_THREAD_SAFE_FUNCTIONS
__forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
return localtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
return gmtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline char *__CRTDECL ctime_r(const time_t *_Time, char *_Str) {
return ctime_s(_Str, 0x7fffffff, _Time) ? NULL : _Str;
}
__forceinline char *__CRTDECL asctime_r(const struct tm *_Tm, char * _Str) {
return asctime_s(_Str, 0x7fffffff, _Tm) ? NULL : _Str;
}
#endif
```
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201012234348.1427-5-luoyonggang@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
convert these line from tab to space
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201012234348.1427-2-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because most files in QEMU are grouped into static libraries, Meson conservatively
compiles them with -fPIC. This is overkill and produces slowdowns up to 20% on
some TCG tests.
As a stopgap measure, use the b_staticpic option to limit the slowdown to
--enable-pie. https://github.com/mesonbuild/meson/pull/7760 will allow
us to use b_staticpic=false and let Meson do the right thing.
Reported-by: Ahmed Karaman <ahmedkrmn@outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200924092314.1722645-57-pbonzini@redhat.com>
Message-Id: <20201007160038.26953-2-alex.bennee@linaro.org>
Unlike other OSs it is not possible for gdb to temporarily disable ASLR when
debugging executables on Windows which causes gdb to fail with memory access
errors when trying to debug QEMU.
Keep ASLR enabled by default on Windows via the --dynamicbase compiler flag
except for --enable-debug builds when there is a clear expectation that a
functioning gdb is expected at the cost of slightly less security.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201005133434.12614-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Environment variables like CFLAGS are easy to accidentally change. Meson
warns if that happens, but in a project with a lot of configuration that
is easy to lose. It is also surprising behavior since meson caches -D
options and remembers those on reconfiguration (which we rely on,
since configure options become -D options).
By placing the user-provided CFLAGS, CXXFLAGS and LDFLAGS in the
cross file, we at least get consistent behavior. These environment
variables are still ugly and not really recommended, but there are
distros that rely on them. For the gory details, refer to
https://github.com/mesonbuild/meson/issues/4664.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923092617.1593722-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the CFLAGS, CXXFLAGS or LDFLAGS variables are present in the environment,
any modification made within the configure script is passed down to Meson.
This is particularly undesirable for the "-pie" option, since it overrides
"-shared" and thus messes up the linker flags for shared modules.
Using a separate variable therefore fixes the bug, while clarifying that
the scope of these CFLAGS is just the configure script.
We also do not need to pass those variables in config-host.mak; they
were only used for printing the summary now that all submodules are
built with handwritten Meson rules). For now synthesize CFLAGS in the
configuration summary, the next patch will also pass them in a cleaner
way using the cross file.
Reported-by: Frederic Bezies
Analyzed-by: Toolybird
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923092617.1593722-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the path to the program to scripts/check_sparse.py, which
previously was not included in config-host.mak. Change
scripts/check_sparse.py to work with cgcc, which seems to
work better with sparse 0.6.x.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We no longer need dummy files to detect targets, since
default-configs/targets/ exists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The config-target.mak files are small constant, we can therefore just
write them down explicitly.
This removes a pretty large part of the configure script, including the
whole logic to detect which accelerators are supported by each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Omit symbols that are not needed by softmmu or bsd-user targets,
in preparation for moving the generated config-target.mak files
into the source tree.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several CONFIG_* symbols in config-target.mak are easily computed from just
the target name. We do not need them in config-target.mak, and can instead
place them in the config_target dictionary only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move to meson the code to detect the presence of accelerators, and
to define accelerator-specific config-target.h symbols.
The logic for now is duplicated in configure because it is still
in use to build the list of targets (which is in turn used to
create the config-target.mak files). The next patches remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare to process "auto" in meson rather than configure: standardize the
shape of the code that changes "auto" to enabled/disabled, to ease the review
when it will be moved to meson.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving the tests to meson. For now they only have
enabled/disabled as the possible values when meson is invoked,
but "auto" will be a possibility later, when configure will only
parse the command line options.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make room for target files in default-configs/targets/
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All our supported build platforms have Python 3.6 or newer nowadays, and
there are some useful features in Python 3.6 which are not available in
3.5 yet (e.g. the type hint annotations which will allow us to statically
type the QAPI parser), so let's bump the minimum Python version to 3.6 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200923162908.95372-1-thuth@redhat.com>
Message-Id: <20200925154027.12672-16-alex.bennee@linaro.org>
Now that the installation is relocatable, there is no need to compile a
Windows-format prefix into Win32 binaries. Instead, the prefix will
only be used to compute installation-relative paths, and it can be
any string.
Drop the "Program Files" path completely: it is only usable on English
versions of Windows; therefore, using the NSIS installer to get the
"correct" path to the Program Files folder is recommended, and NSIS
works just as well with any prefix.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because the target/i386/hvf/meson.build rule culls hvf support
on non-Darwin systems, a --enable-hvf build is succeeding.
To fix this, just try the compilation test every time someone
passes --enable-hvf.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While detection of the framework was already there, moving
the option allows for better error reporting.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gerd Hoffmann
Alex Bennée
Bastian Koppelmann
Thomas Huth
Peter Maydell
Markus Armbruster
Paolo Bonzini
Joelle van Dyne
Reinoud Zandijk
Miroslav Rezanina
Richard Henderson
David CARLIER
Denis Plotnikov
Akihiko Odaki
Alexander Bulekov
Jagannathan Raman
Philippe Mathieu-Daudé
Dan Streetman
Marc-André Lureau
Joshua Watt
Jiaxun Yang
Daniele Buono
Christian Ehrhardt
Roman Bolshakov
Max Reitz
Olaf Hering
Stefan Hajnoczi
Bruce Rogers
Misono Tomohiro
Michael Tokarev
Yonggang Luo
Daniel P. Berrangé
Mark Cave-Ayland