Using log_pc produces the pc at the beginning of TB,
not the actual pc installed by cpu_restore_state_from_tb,
which could be any of the guest instructions within TB.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid CPUArchState local variable when cpu_env() is used once.
Mechanical patch using the following Coccinelle spatch script:
@@
type CPUArchState;
identifier env;
expression cs;
@@
{
- CPUArchState *env = cpu_env(cs);
... when != env
- env
+ cpu_env(cs)
... when != env
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extends API with three new functions:
qemu_plugin_register_vcpu_{tb, insn, mem}_exec_inline_per_vcpu().
Those functions takes a qemu_plugin_u64 as input.
This allows to have a thread-safe and type-safe version of inline
operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-18-alex.bennee@linaro.org>
Instead of working on a fixed memory location, allow to address it based
on cpu_index, an element size and a given offset.
Result address: ptr + offset + cpu_index * element_size.
With this, we can target a member in a struct array from a base pointer.
Current semantic is not modified, thus inline operation still targets
always the same memory location.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-17-alex.bennee@linaro.org>
This creates a per-page method for checking of alignment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the target to set tlb flags to apply to all of the
comparators. Remove MemTxAttrs.byte_swap, as the bit is
not relevant to memory transactions, only the page mapping.
Adjust target/sparc to set TLB_BSWAP directly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move qemu_host_page_{size,mask} and HOST_PAGE_ALIGN into bsd-user.
It should be removed from bsd-user as well, but defer that cleanup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-28-richard.henderson@linaro.org>
Use qemu_real_host_page_size instead. Except for the final mprotect
within page_protect, we already handled host < target page size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-2-richard.henderson@linaro.org>
On i386, after fixing the page walking code to work with pages in
MMIO memory (specifically CXL emulated interleaved memory),
a crash was seen in an interrupt handling path.
Useful part of backtrace
7 0x0000555555ab1929 in bql_lock_impl (file=0x555556049122 "../../accel/tcg/cputlb.c", line=2033) at ../../system/cpus.c:524
8 bql_lock_impl (file=file@entry=0x555556049122 "../../accel/tcg/cputlb.c", line=line@entry=2033) at ../../system/cpus.c:520
9 0x0000555555c9f7d6 in do_ld_mmio_beN (cpu=0x5555578e0cb0, full=0x7ffe88012950, ret_be=ret_be@entry=0, addr=19595792376, size=size@entry=8, mmu_idx=4, type=MMU_DATA_LOAD, ra=0) at ../../accel/tcg/cputlb.c:2033
10 0x0000555555ca0fbd in do_ld_8 (cpu=cpu@entry=0x5555578e0cb0, p=p@entry=0x7ffff4efd1d0, mmu_idx=<optimized out>, type=type@entry=MMU_DATA_LOAD, memop=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:2356
11 0x0000555555ca341f in do_ld8_mmu (cpu=cpu@entry=0x5555578e0cb0, addr=addr@entry=19595792376, oi=oi@entry=52, ra=0, ra@entry=52, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2439
12 0x0000555555ca5f59 in cpu_ldq_mmu (ra=52, oi=52, addr=19595792376, env=0x5555578e3470) at ../../accel/tcg/ldst_common.c.inc:169
13 cpu_ldq_le_mmuidx_ra (env=0x5555578e3470, addr=19595792376, mmu_idx=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/ldst_common.c.inc:301
14 0x0000555555b4b5fc in ptw_ldq (ra=0, in=0x7ffff4efd320) at ../../target/i386/tcg/sysemu/excp_helper.c:98
15 ptw_ldq (ra=0, in=0x7ffff4efd320) at ../../target/i386/tcg/sysemu/excp_helper.c:93
16 mmu_translate (env=env@entry=0x5555578e3470, in=0x7ffff4efd3e0, out=0x7ffff4efd3b0, err=err@entry=0x7ffff4efd3c0, ra=ra@entry=0) at ../../target/i386/tcg/sysemu/excp_helper.c:174
17 0x0000555555b4c4b3 in get_physical_address (ra=0, err=0x7ffff4efd3c0, out=0x7ffff4efd3b0, mmu_idx=0, access_type=MMU_DATA_LOAD, addr=18446741874686299840, env=0x5555578e3470) at ../../target/i386/tcg/sysemu/excp_helper.c:580
18 x86_cpu_tlb_fill (cs=0x5555578e0cb0, addr=18446741874686299840, size=<optimized out>, access_type=MMU_DATA_LOAD, mmu_idx=0, probe=<optimized out>, retaddr=0) at ../../target/i386/tcg/sysemu/excp_helper.c:606
19 0x0000555555ca0ee9 in tlb_fill (retaddr=0, mmu_idx=0, access_type=MMU_DATA_LOAD, size=<optimized out>, addr=18446741874686299840, cpu=0x7ffff4efd540) at ../../accel/tcg/cputlb.c:1315
20 mmu_lookup1 (cpu=cpu@entry=0x5555578e0cb0, data=data@entry=0x7ffff4efd540, mmu_idx=0, access_type=access_type@entry=MMU_DATA_LOAD, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:1713
21 0x0000555555ca2c61 in mmu_lookup (cpu=cpu@entry=0x5555578e0cb0, addr=addr@entry=18446741874686299840, oi=oi@entry=32, ra=ra@entry=0, type=type@entry=MMU_DATA_LOAD, l=l@entry=0x7ffff4efd540) at ../../accel/tcg/cputlb.c:1803
22 0x0000555555ca3165 in do_ld4_mmu (cpu=cpu@entry=0x5555578e0cb0, addr=addr@entry=18446741874686299840, oi=oi@entry=32, ra=ra@entry=0, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2416
23 0x0000555555ca5ef9 in cpu_ldl_mmu (ra=0, oi=32, addr=18446741874686299840, env=0x5555578e3470) at ../../accel/tcg/ldst_common.c.inc:158
24 cpu_ldl_le_mmuidx_ra (env=env@entry=0x5555578e3470, addr=addr@entry=18446741874686299840, mmu_idx=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/ldst_common.c.inc:294
25 0x0000555555bb6cdd in do_interrupt64 (is_hw=1, next_eip=18446744072399775809, error_code=0, is_int=0, intno=236, env=0x5555578e3470) at ../../target/i386/tcg/seg_helper.c:889
26 do_interrupt_all (cpu=cpu@entry=0x5555578e0cb0, intno=236, is_int=is_int@entry=0, error_code=error_code@entry=0, next_eip=next_eip@entry=0, is_hw=is_hw@entry=1) at ../../target/i386/tcg/seg_helper.c:1130
27 0x0000555555bb87da in do_interrupt_x86_hardirq (env=env@entry=0x5555578e3470, intno=<optimized out>, is_hw=is_hw@entry=1) at ../../target/i386/tcg/seg_helper.c:1162
28 0x0000555555b5039c in x86_cpu_exec_interrupt (cs=0x5555578e0cb0, interrupt_request=<optimized out>) at ../../target/i386/tcg/sysemu/seg_helper.c:197
29 0x0000555555c94480 in cpu_handle_interrupt (last_tb=<synthetic pointer>, cpu=0x5555578e0cb0) at ../../accel/tcg/cpu-exec.c:844
Peter identified this as being due to the BQL already being
held when the page table walker encounters MMIO memory and attempts
to take the lock again. There are other examples of similar paths
TCG, so this follows the approach taken in those of simply checking
if the lock is already held and if it is, don't take it again.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240219173153.12114-4-Jonathan.Cameron@huawei.com>
[rth: Use BQL_LOCK_GUARD]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a page table is in IO memory and lookup_tb_ptr probes
the TLB it can result in a page table walk for the instruction
fetch. If this hits IO memory and io_prepare falsely assumes
it needs to do a TLB recompile.
Avoid that by setting can_do_io at the start of lookup_tb_ptr.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA_a_AyQ=Epz3_+CheAT8Crsk9mOu894wbNW_FywamkZiw@mail.gmail.com/#t
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240219173153.12114-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As we expand the per-vCPU data for plugins we don't want to pollute
CPUState. For now this just moves the plugin_mask (renamed to
event_mask) as the memory callbacks are accessed directly by TCG
generated code.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-23-alex.bennee@linaro.org>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move this x86-specific code out of the generic accel/tcg/.
Reported-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to make accel/tcg/ target agnostic,
introduce the cpu_exec_halt() handler.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is now trivial, and with inlining we can
re-use the calling function's tcg_ops variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move this x86-specific code out of the generic accel/tcg/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to make accel/tcg/ target agnostic,
introduce the need_replay_interrupt() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20240124101639.30056-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert packed logic to dumb icount_exit_request() helper.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240124101639.30056-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg_cpus_exec() operates on a single vCPU, rename it
as 'tcg_cpu_exec'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240124101639.30056-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg_cpus_destroy() operates on a single vCPU, rename it
as 'tcg_cpu_destroy'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240124101639.30056-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg_ss[] source set contains target-specific units.
Rename it as 'tcg_specific_ss[]' for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240124101639.30056-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg/ should not depend on accel/tcg/, but perf and debuginfo
support provided by the latter are being used by tcg/tcg.c.
Since that's the only user, move both to tcg/.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-5-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for moving perf.c to tcg/.
This affects only profiling guest code, which has code in a non-0 based
segment, e.g., 16-bit code, which is not particularly important.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-4-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop using TARGET_PAGE_MASK in order to make perf.c more
target-agnostic.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231212003837.64090-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240125054631.78867-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the manual rcu_read_(un)lock calls in cpu_exec().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124074201.8239-2-philmd@linaro.org>
[rth: Use RCU_READ_LOCK_GUARD not WITH_RCU_READ_LOCK_GUARD]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unless I'm missing something egregious, the jmp cache is only every
populated with a valid entry by the same thread that reads the cache.
Therefore, the contents of any valid entry are always consistent and
there is no need for any acquire/release magic.
Indeed ->tb has to be accessed with atomics, because concurrent
invalidations would otherwise cause data races. But ->pc is only ever
accessed by one thread, and accesses to ->tb and ->pc within tb_lookup
can never race with another tb_lookup. While the TranslationBlock
(especially the flags) could be modified by a concurrent invalidation,
store-release and load-acquire operations on the cache entry would
not add any additional ordering beyond what you get from performing
the accesses within a single thread.
Because of this, there is really nothing to win in splitting the CF_PCREL
and !CF_PCREL paths. It is easier to just always use the ->pc field in
the jump cache.
I noticed this while working on splitting commit 8ed558ec0c
("accel/tcg: Introduce TARGET_TB_PCREL", 2022-10-04) into multiple
pieces, for the sake of finding a more fine-grained bisection
result for https://gitlab.com/qemu-project/qemu/-/issues/2092.
It does not (and does not intend to) fix that issue; therefore
it may make sense to not commit it until the root cause
of issue #2092 is found.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240122153409.351959-1-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Keep system/watchpoint.c accelerator-agnostic by moving
TCG specific code to accel/tcg/watchpoint.c. Update meson.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240111162032.43378-1-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-6-philmd@linaro.org>
Rather than having to lookup for what the 0, 1, 2, ...
icount values are, use a enum definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231208113529.74067-4-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have icount_configure()
return a boolean indicating whether an error is set or not.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-2-philmd@linaro.org>
Since previous commit, tb_invalidate_phys_page() is not used
anymore in system emulation. Make it static for user emulation
and remove its public declaration in "exec/translate-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231130205600.35727-1-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The term "iothread lock" is obsolete. The APIs use Big QEMU Lock (BQL)
in their names. Update the code comments to use "BQL" instead of
"iothread lock".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A lot of the hang I see are when we end up spinning in
rr_wait_io_event for an event that will never come in playback. As a
new check functions which can see if we are in PLAY mode and kick us
us the wait function so the event can be processed.
This fixes most of the failures in replay_kernel.py
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2013
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-12-alex.bennee@linaro.org>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without this, we just dirty a single byte, and so if the caller writes
more than one byte to the host memory then we won't have invalidated any
translation blocks that start after the first byte and overlap those
writes. In particular, AArch64's DC ZVA implementation uses probe_access
(via probe_write), and so we don't invalidate the entire block, only the
TB overlapping the first byte (and, in the unusual case an unaligned VA
is given to the instruction, we also probe that specific address in
order to get the right VA reported on an exception, so will invalidate a
TB overlapping that address too). Since our IC IVAU implementation is a
no-op for system emulation that relies on the softmmu already having
detected self-modifying code via this mechanism, this means we have
observably wrong behaviour when jumping to code that has been DC ZVA'ed.
In practice this is an unusual thing for software to do, as in reality
the OS will DC ZVA the page and the application will go and write actual
instructions to it that aren't UDF #0, but you can write a test that
clearly shows the faulty behaviour.
For functions other than probe_access it's not clear what size to use
when 0 is passed in. Arguably a size of 0 shouldn't dirty at all, since
if you want to actually write then you should pass in a real size, but I
have conservatively kept the implementation as dirtying the first byte
in that case so as to avoid breaking any assumptions about that
behaviour.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20231104031232.3246614-1-jrtc27@jrtc27.com>
[rth: Move the dirtysize computation next to notdirty_write.]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In cpu_exec_step_atomic, we did not set CF_LAST_IO, which lead
to a loop with cpu_io_recompile.
But since 18a536f1f8 ("Always require can_do_io") we no longer
need a flag to indicate when the last insn should have can_do_io set,
so remove the flag entirely.
Reported-by: Clément Chigot <chigot@adacore.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1961
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor the TCG specific code from cpu_common_reset_hold() to
tcg_cpu_reset_hold() within tcg-accel-ops.c. Since this file
is sysemu specific, we can inline tcg_flush_softmmu_tlb(),
removing its declaration in "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-4-philmd@linaro.org>
Introduce cpu_exec_reset_hold() which call an accelerator
specific AccelOpsClass::cpu_reset_hold() handler.
Define a stub on TCG user emulation, because CPU reset is
irrelevant there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-3-philmd@linaro.org>
"exec/cpu-common.h" is meant to contain the declarations
related to CPU usable with any accelerator / target
combination.
tcg_flush_jmp_cache() is specific to TCG, so restrict its
declaration by moving it to "exec/tb-flush.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-2-philmd@linaro.org>
Store bytes under a mask is fundamentally a cmpxchg, not a straight store.
Use HAVE_CMPXCHG128 instead of HAVE_ATOMIC128_RW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-8-richard.henderson@linaro.org>
We handled the HAVE_ATOMIC128_RW case with atomic16_set at the top of
the function; the only thing left for a host without that support is
to fall through to cpu_loop_exit_atomic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-7-richard.henderson@linaro.org>
