The initial reason to write this patch was to remove the last use of
CONFIG_DEBUG_TCG from the makefiles; the flags to use to build TCG
plugins are unrelated to --enable-debug-tcg, and instead they should
be the same as those used to build emulators (the plugins are not build
via meson for demonstration reasons only).
However, since contrib/plugins/Makefile is also the last case of doing
a compilation job using config-host.mak, go a step further and make it
use a completely separate configuration file, removing all references
to compilers from the toplevel config-host.mak. Clean up references to
empty variables, and use .SECONDARY so that intermediate object files
are not deleted.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Under Darwin, using -shared makes it impossible to have undefined symbols
and -bundle has to be used instead; so detect the OS and use
different options.
Based-on: <20230907101811.469236-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/lockstep.c:138:25: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, them->pc, g_slist_length(divergence_log),
^~~~~~
plugins/lockstep.c:138:33: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, them->pc, g_slist_length(divergence_log),
^~~~~~~~
plugins/lockstep.c:148:25: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, us->insn_count, them->pc, them->insn_count);
^~~~~~
plugins/lockstep.c:148:49: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, us->insn_count, them->pc, them->insn_count);
^~~~~~~~
plugins/lockstep.c:156:36: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
prev->block->pc, prev->block->insns,
^~~~~~~~~~~~~~~
plugins/lockstep.c:156:53: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
prev->block->pc, prev->block->insns,
^~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/howvec.c:186:40: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
class->count);
^~~~~~~~~~~~
plugins/howvec.c:213:36: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
rec->count,
^~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-4-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/drcov.c:52:13: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
start_code, end_code, entry, path);
^~~~~~~~~~
plugins/drcov.c:52:25: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
start_code, end_code, entry, path);
^~~~~~~~
plugins/drcov.c:52:35: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
start_code, end_code, entry, path);
^~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/cache.c:550:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_daccess,
^~~~~~~~~~
plugins/cache.c:551:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_dmisses,
^~~~~~~~~~
plugins/cache.c:553:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_iaccess,
^~~~~~~~~~
plugins/cache.c:554:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_imisses,
^~~~~~~~~~
plugins/cache.c:560:32: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l2_access,
^~~~~~~~~
plugins/cache.c:561:32: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l2_misses,
^~~~~~~~~
plugins/cache.c:665:52: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
g_string_append_printf(rep, ", %ld, %s\n", insn->l1_dmisses,
~~~ ^~~~~~~~~~~~~~~~
%llu
plugins/cache.c:678:52: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
g_string_append_printf(rep, ", %ld, %s\n", insn->l1_imisses,
~~~ ^~~~~~~~~~~~~~~~
%llu
plugins/cache.c:695:52: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
g_string_append_printf(rep, ", %ld, %s\n", insn->l2_misses,
~~~ ^~~~~~~~~~~~~~~
%llu
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-2-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-soname is not needed for runtime-loaded modules. For example, Meson says:
if not isinstance(target, build.SharedModule) or target.force_soname:
# Add -Wl,-soname arguments on Linux, -install_name on OS X
commands += linker.get_soname_args(
self.environment, target.prefix, target.name, target.suffix,
target.soversion, target.darwin_versions)
(force_soname is set is shared modules are linked into a build target, which is not
the case here.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prcb may be set to 0 for some CPUs if the dump was taken before they
start. The dump may still contain valuable information for started CPUs
so don't abandon conversion in such a case.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20230611033434.14659-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the virtio-gpu feature in contrib/vhost-user-gpu, which was
unsupported until now.
In this implementation, the feature is enabled inconditionally to avoid
creating another optional config argument.
Similarly to get_display_info, vhost-user-gpu sends a message back to
the frontend to have access to all the display information. In the
case of get_edid, it also needs to pass which scanout we should
retrieve the edid for.
The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is required if the
frontend sets the VIRTIO_GPU_F_EDID virtio-gpu feature. If the frontend
sets the virtio-gpu feature but does not support the protocol feature,
the backend will abort with an error.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-4-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The old g_memdup is deprecated, use the replacement.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-22-alex.bennee@linaro.org>
It was hard to track down this leak as it was an internal allocation
by glib and the backtraces did not give much away. The autofree was
freeing the allocation with g_free() but not taking care of the
individual strings. They should have been freed with g_strfreev()
instead.
Searching the glib source code for the correct string free function
led to:
G_DEFINE_AUTO_CLEANUP_FREE_FUNC(GStrv, g_strfreev, NULL)
and indeed if you read to the bottom of the documentation page you
will find:
typedef gchar** GStrv;
A typedef alias for gchar**. This is mostly useful when used together with g_auto().
So fix up all the g_autofree g_strsplit case that smugly thought they
had de-allocation covered.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-21-alex.bennee@linaro.org>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
Meson already knows to test with the positive form of the flag, which
simplifies the test. Warnings are now tested explicitly for the C++
compiler, instead of hardcoding those that are only available for
the C language.
At this point all compiler flags in QEMU_CFLAGS are global and only
depend on the OS. No feature tests are performed in configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU adds the path to glib.h to all compilation commands. This is simpler
due to the pervasive use of static_library, and was grandfathered in from
the previous Make-based build system. Until Meson 0.63 the only way to
do this was to detect glib in configure and use add_project_arguments,
but now it is possible to use add_project_dependencies instead.
gmodule is detected in a separate variable, with export enabled for
modules and disabled for plugin.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD recently acquired Xilinx and contributors have been transitioning
their emails across.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vikram Garhwal <vikram.garhwal@amd.com>
Cc: Stefano Stabellini <stefano.stabellini@amd.com>
Cc: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Cc: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-Id: <20230315174331.2959-33-alex.bennee@linaro.org>
I've only added the names explicitly acked.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-32-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anton Johansson <anjo@rev.ng>
Cc: Niccolò Izzo <nizzo@rev.ng>
Cc: Paolo Montesel <babush@rev.ng>
Reviewed-by: Alessandro Di Federico <ale@rev.ng>
Message-Id: <20230315174331.2959-31-alex.bennee@linaro.org>
This replaces the previous attempt to add c-sky.com. Group everything
under Alibaba now.
Added as requested by LIU Zhiwei.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230315174331.2959-30-alex.bennee@linaro.org>
We have multiple contributors from both .co.uk and .com versions of
the address. Also add .de for completeness sake.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Wooodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230315174331.2959-29-alex.bennee@linaro.org>
The company website lists QEMU amongst the things they work on so I
assume these are corporate contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230315174331.2959-28-alex.bennee@linaro.org>
We have a number of contributors from this domain which is a corporate
endeavour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Steven Lee <steven_lee@aspeedtech.com>
Cc: Troy Lee <troy_lee@aspeedtech.com>
Cc: Howard Chiu <howard_chiu@aspeedtech.com>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Troy Lee <troy_lee@aspeedtech.com>
Message-Id: <20230315174331.2959-27-alex.bennee@linaro.org>
Since its inception elf2dmp has checked MZ signatures within an
address space above IDT[0] interrupt vector and took first PE image
found as Windows Kernel.
But in Windows Server 2022 memory dump this address space range is
full of invalid PE fragments and the tool must check that PE image
is 'ntoskrnl.exe' actually.
So, introduce additional validation by checking image name from
Export Directory against 'ntoskrnl.exe'.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Tested-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-4-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move out PE directory search functionality to be reused not only
for Debug Directory processing but for arbitrary PE directory.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-3-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Originally elf2dmp were added with some code style issues,
especially in pe.h header, and some were introduced by
2d0fc797fa. Fix them now.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-2-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to LinkedIn Idan works at IBM. Please confirm if you want
these contributions counted under IBM or as personal contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Idan Horowitz <idan.horowitz@gmail.com>
Message-Id: <20221219121914.851488-11-alex.bennee@linaro.org>
A number of Facebook developers contribute to the project. Peter can
you confirm your want pjd.dev contributions counted here or as
an individual contributor?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Iris Chen <irischenlj@fb.com>
Cc: Daniel Müller <muellerd@fb.com>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Message-Id: <20221219121914.851488-9-alex.bennee@linaro.org>
I wasn't sure if you want to be added as an individual contributor or
an academic so please confirm.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Message-Id: <20221219121914.851488-7-alex.bennee@linaro.org>
We have a number of contributors from this domain which looks like it
is a corporate endeavour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Rahul Pathak <rpathak@ventanamicro.com>
Cc: Anup Patel <apatel@ventanamicro.com>
Message-Id: <20221219121914.851488-6-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Message-Id: <20221219121914.851488-4-alex.bennee@linaro.org>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
64bit off_t is already in use since build uses _FILE_OFFSET_BITS=64
already. Using lseek/off_t also makes it work with latest musl without
using _LARGEFILE64_SOURCE macro. This macro is implied with _GNU_SOURCE
when using glibc but not with musl.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
CC: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221218220740.315839-1-raj.khem@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
We originally naively treated expansion as safe because we expected
each new CPU/thread to appear in order. However the -M raspi2 model
triggered a case where a new high cpu_index thread started executing
just before a smaller one.
Clean this up by converting the GArray into the simpler GPtrArray and
then holding a lock for the expansion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-29-alex.bennee@linaro.org>
We used to rely on QEMU_CFLAGS to expose the debug flags but now this
is synthesised by meson and only available to the main build. Add our
own flags if we detect the build has been enabled with
CONFIG_DEBUG_TCG (which is the default for --enable-debug anyway).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221027183637.2772968-28-alex.bennee@linaro.org>
The 'kdgb' is allocating memory in get_kdbg(), but it is not freed in
error path. So fix that.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221007020128.760-1-luzhipeng@cestc.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
again to the academic group map.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220926134609.3301945-7-alex.bennee@linaro.org>
Please confirm this is the correct mapping for you.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Simon Safar <simon@simonsafar.com>
Message-Id: <20220926134609.3301945-2-alex.bennee@linaro.org>
The English website (http://english.is.cas.cn/) in on a slightly
different domain but has the same logo as http://www.iscas.ac.cn/.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20220929114231.583801-51-alex.bennee@linaro.org>
His blog confirms he is not affiliated with Loongson.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220929114231.583801-50-alex.bennee@linaro.org>
Also map his old codesourcery address to his canonical address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paul Brook <paul@nowt.org>
Message-Id: <20220929114231.583801-49-alex.bennee@linaro.org>
Please confirm you are happy with this mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220929114231.583801-48-alex.bennee@linaro.org>
The purpose of the matches was to only track the execution of
instructions we care about. Without resetting skip to the value at the
start of the block we end up dumping all instructions after the match
with the consequent load on the instrumentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-40-alex.bennee@linaro.org>
Sometimes the whole execlog is just two much so add the ability to
filter by instruction opcode or address.
[AJB: this shows for example
qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max \
-semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin -D plugin.out
the st1w SVE instruction is not instrumenting its stores.]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20220929114231.583801-36-alex.bennee@linaro.org>
We allocate VuVirtqElement with g_malloc() in
virtqueue_alloc_element(), but free it with free() in
vhost-user-blk.c. Harmless, but use g_free() anyway.
One of the calls is guarded by a "not null" condition. Useless,
because it cannot be null (it's dereferenced right before), and even
it it could be, free() and g_free() do the right thing. Drop the
conditional.
Fixes: Coverity CID 1490290
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220630085219.1305519-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We were not building the vhost-user-blk server due to 32 bit
compilation problems. The problem was due to format string types so
fix that and then enable the build. Tweak the rule to follow the same
rules as other vhost-user daemons.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-12-alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Add ELF header checking to prevent processing input file which is not
QEMU x86_64 guest memory dump or even not ELF.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1013
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220520084339.171684-1-viktor.prutyanov@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 747421e949 ("Implements Backend
Program conventions for vhost-user-scsi") introduced fd-passing support
as part of implementing the vhost-user backend program conventions.
When fd passing is used the UNIX domain socket path is NULL and we must
not call unlink(2).
The unlink(2) call is necessary when the listen socket, lsock, was
created successfully since that means the UNIX domain socket is visible
in the file system.
Fixes: Coverity CID 1488353
Fixes: 747421e949 ("Implements Backend Program conventions for vhost-user-scsi")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220516155701.1789638-1-stefanha@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Context structure in 64-bit Windows differs from 32-bit one and it
should be reflected in its name.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-2-viktor.prutyanov@redhat.com>
The GLib documentation says "a NULL-terminated array of GOptionEntrys"
so we'd better make sure there is a terminator that lets
g_option_context_add_main_entries() know when the end of the array has
been reached.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20220411150057.3009667-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sakshi Kaushik <sakshikaushik717@gmail.com>
Message-id: 20220406162410.8536-1-sakshikaushik717@gmail.com
[Name the iSCSI URL long option --iscsi-uri instead of --iscsi_uri for
consistency, fix --fd which was rejected due to an outdated
--socket-path check, and add missing entries[] terminator.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I was running some historical tags for the last 10 years and got the
following warnings:
git log --use-mailmap --numstat --since "June 2010" | ~/src/gitdm.git/gitdm -n -l 5
alarson@ddci.com is an author name, probably not what you want
bad utf-8 ('utf-8' codec can't decode byte 0xe4 in position 552: invalid continuation byte) in patchm skipping
bad utf-8 ('utf-8' codec can't decode byte 0xe4 in position 342: invalid continuation byte) in patchm skipping
michael@ozlabs.org is an author name, probably not what you want
Oops...funky email nicta.com.au
bad utf-8 ('utf-8' codec can't decode byte 0xe9 in position 232: invalid continuation byte) in patchm skipping
Oops...funky email andreas.faerber
Grabbing changesets...done
Processed 76422 csets from 1902 developers
The following fixes try and alleviate that although I still get a
warning for Aaron which I think is from 9743cd5736.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220315121251.2280317-6-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aaron Larson <alarson@ddci.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Färber <andreas.faerber@web.de>
Cc: Jason Wang <jasowang@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
The check should be performed even if !have_system, as long as there is some hope that
vhost-user-gpu will be built. Store into have_vhost_user_gpu whether vhost-user-gpu
will be built; we will also use the variable to decide whether to look for libepoxy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the ability to generate files in drcov format. Primary
goal this script is to have coverage logfiles thatwork in Lighthouse.
Signed-off-by: Ivanov Arkady <arkadiy.ivanov@ispras.ru>
Message-Id: <163491884553.304355.13246023070235438959.stgit@pc-System-Product-Name>
[AJB: use g_ptr_array instead of slist]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-23-alex.bennee@linaro.org>
This will be needed as soon as config-poison.h moves from configure to
a meson custom_target (which is built at "ninja" time).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default L2 is not enabled and is enabled by either using the
newly-introduced "l2" boolean argument, or by setting any of the L2
cache parameters using args. On specifying "l2=on", the default cache
configuration is used.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-5-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-17-alex.bennee@linaro.org>
This way of handling args is more lenient and sets a better framework to
parse boolean command line arguments.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-4-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-16-alex.bennee@linaro.org>
This adds an implementation of a simple L2 configuration, in which a
unified L2 cache (stores both blocks of instructions and data) is
maintained for each core separately, with no inter-core interaction
taken in account. The L2 cache is used as a backup for L1 and is only
accessed if the wanted block does not exist in L1.
In terms of multi-threaded user-space emulation, the same approximation
of L1 is done, a static number of caches is maintained, and each and
every memory access initiated by a thread will have to go through one of
the available caches.
An atomic increment is used to maintain the number of L2 misses per
instruction.
The default cache parameters of L2 caches is:
2MB cache size
16-way associativity
64-byte blocks
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-3-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-15-alex.bennee@linaro.org>
Coverity points out that if the PDB file we're trying to read
has a header specifying a block_size of zero then we will
end up trying to divide by zero in pdb_ds_read_file().
Check for this and fail cleanly instead.
Fixes: Coverity CID 1458869
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20210910170656.366592-3-philmd@redhat.com
Message-Id: <20210901143910.17112-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Coverity points out that we aren't checking the return value
from curl_easy_setopt().
Fixes: Coverity CID 1458895
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20210910170656.366592-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GBM library detection does not need to be in the configure script,
since it does not have any user-facing options (there are no
--enable-gbm or --disable-gbm switches). Let's move it to meson.build
instead, so we don't have to clutter config-host.mak with the related
switches.
Additionally, only check for GBM if it is really required, i.e. if we
either compile with OpenGL or with virglrenderer support.
Message-Id: <20210714085045.797168-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Correctly parsing plugin argument since they now must be provided as
full-form boolean parameters, e.g.:
-plugin ./contrib/plugins/libhowvec.so,verbose=on,inline=on
Also, introduced the argument "count" that accepts one opt to count
individually at a time.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-8-ma.mandourr@gmail.com>
Parsing boolean arguments correctly (e.g. pattern=on or source=false).
Introduced a new "track" argument that takes a [read|write] value. This
substitutes passing read or write to "arg=" that is deprecated.
Also, matches are now taken one by one through the "match" argument.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-7-ma.mandourr@gmail.com>
Since plugin arguments now expect boolean arguments, a plugin argument
name "sortby" now expects a value of "read", "write", or "address".
"io" arg is now expected to be passed as a full-form boolean parameter,
i.e. "io=on|true|yes|off|false|no"
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-4-ma.mandourr@gmail.com>
Multicore L1 cache modelling is introduced and is supported for both
full system emulation and linux-user.
For full-system emulation, L1 icache and dcache are maintained for each
available core, since this information is exposed to the plugin through
`qemu_plugin_n_vcpus()`.
For linux-user, a static number of cores is assumed (default 1 core, and
can be provided as a plugin argument `cores=N`). Every memory access
goes through one of these caches, this approach is taken as it's
somewhat akin to what happens on real setup, where a program that
dispatches more threads than the available cores, they'll thrash
each other
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210803151301.123581-2-ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's not necessary to lock the address translation portion of the
vcpu_mem_access callback.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210714172151.8494-3-ma.mandourr@gmail.com>
Message-Id: <20210720232703.10650-23-alex.bennee@linaro.org>
This manifests itself when associativity degree is greater than the
number of sets and FIFO is used, otherwise it's also a memory leak
whenever FIFO was used.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210714172151.8494-2-ma.mandourr@gmail.com>
Message-Id: <20210720232703.10650-22-alex.bennee@linaro.org>
It makes sense to put our various interns in a group so we can see the
overall impact of GSoC and Outreachy on the project.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Cc: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Cc: César Belley <cesar.belley@lse.epita.fr>
Message-Id: <20210720232703.10650-19-alex.bennee@linaro.org>
For some reason Alexander's contributions were not getting grouped
from the plain "edu" mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210720232703.10650-18-alex.bennee@linaro.org>
Warner confirmed he works for Netflix on IRC.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210720232703.10650-17-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20210720232703.10650-15-alex.bennee@linaro.org>
I think this mainly comes from kernel-doc stuff imported into the QEMU
tree.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Message-Id: <20210720232703.10650-14-alex.bennee@linaro.org>
As per discussion at:
http://patchwork.ozlabs.org/project/qemu-devel/patch/20201004180443.2035359-19-f4bug@amsat.org/
I've added Bin's personal email as an individual contributor.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Bin Meng <bin.meng@windriver.com>
Cc: Ruimei Yan <ruimei.yan@windriver.com>
Cc: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Message-Id: <20210720232703.10650-13-alex.bennee@linaro.org>
Luis acked on IRC:
#qemu@znc-oftc_2021-07-13.txt:[15:00:02] <lffpires> stsquad: "eldorado.org.br Eldorado" is fine
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <20210720232703.10650-12-alex.bennee@linaro.org>
Minwoo's work from their personal address are treated as personal
contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Message-Id: <20210720232703.10650-11-alex.bennee@linaro.org>
Implemented FIFO and LRU eviction policies. Now one of the three
eviction policies can be chosen as an argument. On not specifying an
argument, LRU is used by default.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210623125458.450462-4-ma.mandourr@gmail.com>
Message-Id: <20210709143005.1554-39-alex.bennee@linaro.org>
Added a cache modelling plugin that uses a static configuration used in
many of the commercial microprocessors and uses random eviction policy.
The purpose of the plugin is to identify the most cache-thrashing
instructions for both instruction cache and data cache.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210623125458.450462-2-ma.mandourr@gmail.com>
Message-Id: <20210709143005.1554-37-alex.bennee@linaro.org>
Log instruction execution and memory access to a file.
This plugin can be used for reverse engineering or for side-channel analysis
using QEMU.
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210702081307.1653644-2-erdnaxe@crans.org>
Message-Id: <20210709143005.1554-35-alex.bennee@linaro.org>
Lets spot the obvious errors.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210709143005.1554-34-alex.bennee@linaro.org>
While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do. Add them back or stop
using them if possible.
In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
