Commit Graph

24 Commits

Author SHA1 Message Date
Paolo Bonzini 890b126e6a hw: allow compiling out SCSI
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 15:14:31 +02:00
David Gibson 1fc125f567 Allow ISA bus to be configured out
Currently, the code to handle the legacy ISA bus is always included in
qemu.  However there are lots of platforms that don't include ISA legacy
devies, and quite a few that have never used ISA legacy devices at all.

This patch allows the ISA bus code to be disabled in the configuration for
platforms where it doesn't make sense.

For now, the default configs are adjusted to include ISA on all platforms
including PCI: anything with PCI can at least in principle add an i82378
PCI->ISA bridge.  Also, CONFIG_IDE_CORE which is already in pci.mak
requires ISA support.

We also explicitly enable ISA on some other non-PCI platforms which include
ISA devices: moxie, sparc and unicore32.  We may want to pare this down in
future.

The platforms that will lose ISA by default are: cris, lm32, microblazeel,
microblaze, openrisc, s390x, tricore, xtensaeb, xtensa.  As far as I can
tell none of these ever used ISA.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-06 12:33:21 +11:00
Mark Cave-Ayland 9eb08a435a sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27 10:01:41 +00:00
Paolo Bonzini e28bee8ee6 hw: move other devices to hw/misc/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:16 +02:00
Paolo Bonzini d2c0bd8458 hw: move DMA controllers to hw/dma/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 3bd884511f hw: move timer devices to hw/timer/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 9944d32001 hw: move char devices to hw/char/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini fc97bb5ba3 hw: move display devices to hw/display/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 34b8f63ea1 hw: move audio devices to hw/audio/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini d7e35d4a84 hw: move NICs to hw/net/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paul Brook a4c75a21f3 Split out common pcnet code
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device.  Split the common code frm the PCI code so
that that can be configures independantly.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 11:23:34 +00:00
Paul Brook 129cac5b5a Remove PCI from sparc32 target
None of the (current) sparc32 machines have a PCI bus, so remove the PCI
code from these configs.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 10:33:55 +00:00
Paul Brook f8f5cfbaa4 PCI config include
Split PCI config options into a separate file

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Artyom Tarasenko 676d9b9b88 sparc32 use empty_slot for missing RAM v1
use empty_slot device for the RAM which is not installed

Models without ECC don't trap when missing ram is accessed.

v0->v1 compile only once and fix indentation

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18 08:55:20 +00:00
Paul Brook 61d3cf93e2 OHCI qdev conversion
Convert remaining OHCI devices to QDEV interface.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-05 19:57:40 +01:00
Alexander Graf b305b9d7d6 target-s390: Don't compile in virtio-pci
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic
gets confused and tries to give us PCI devices instead of S390 virtio devices.

Since we don't have PCI on S390, we can safely not compile virtio-pci at all.

In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I
enabled for every platform except S390. Thanks to this the change should be a
complete nop for every other platform.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 23:41:10 +01:00
Blue Swirl 35da37e141 Compile fdc only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:06 +00:00
Juan Quintela 5f74377c3d Only compile ptimer when one target uses it
Patchworks-ID: 35207
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:13 -05:00
Juan Quintela 626b2a65d6 Only compile m48t59 when one target uses it
Patchworks-ID: 35204
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:12 -05:00
Juan Quintela 2f3c407d81 Only compile escc when one target uses it
Patchworks-ID: 35205
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:12 -05:00
Juan Quintela 9f376df1b2 Only compile esp when one target uses it
Patchworks-ID: 35206
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:12 -05:00
Juan Quintela 065c7a36df Only compile ecc when one target uses it
Patchworks-ID: 35203
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:12 -05:00
Juan Quintela 86e1d113da Only compile qdev_addr when one target uses it
Patchworks-ID: 35201
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:11 -05:00
Juan Quintela 1f3d3c8fd7 Add new config-devices.mak for each target
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.

Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:10 -05:00