This stuff doesn't belong to block layer, and was put there only
because a better home didn't exist then. Now it does.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New limits straight from ATA4 6.2 Register delivered data transfer
command sector addressing.
I figure the old sector limit 63 was blindly copied from the BIOS
int 13 limit. Doesn't apply to the hardware. No idea where the old
cylinder limit comes from.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, it is split between hd_geometry_guess() and
pc_cmos_init_late(). Confusing. info qtree shows the result of the
former. Also confusing.
Fold the part done in pc_cmos_init_late() into hd_geometry_guess().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In particular, don't set disk type and geometry when a CD-ROM on bus
ide.0 has media during CMOS initialization.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This isn't quite orthodox. CHS translation is firmware configuration,
communicated via the RTC's CMOS RAM, not a property of the disk. But
it's best to treat it just like geometry anyway.
Maintain backward compatibility exactly like for geometry: fall back
to DriveInfo's translation, set with -drive trans=...
Bonus: info qtree now shows the translation. Except when it shows
"auto": that's resolved by pc_cmos_init_late(). To be addressed
shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Do this only for ide-hd. ide-drive is legacy. ide-cd doesn't have a
geometry.
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Best to use the same type, to avoid unwanted truncation or sign
extension.
BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
PC BIOS setup needs IDE geometry information. Get it directly from
the device model rather than through the block layer. In preparation
of purging geometry from the block layer, which will happen later in
this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hd_geometry_guess() picks geometry and translation. Callers can get
the geometry directly, via parameters, but for translation they need
to go through the block layer.
Add a parameter for translation, so it can optionally be gotten just
like geometry. In preparation of purging translation from the block
layer, which will happen later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not a single driver has any possibility of failure on their
exit function, let's keep it that way.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This command is not necessary for CD-ROM and DVD-ROM, but some versions of
udev trip on its absence.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AHCI device can provide both PCI and SysBus AHCI device
emulations. For this reason, it wasn't previously converted to use
the pci_dma_*() helper functions. Now that we have universal DMA
helper functions, this converts AHCI to use them.
The DMAContext is obtained from pci_dma_context() in the PCI case and
set to NULL in the SysBus case (i.e. we assume for now that a SysBus
AHCI has no IOMMU translation).
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
dma-helpers.c contains a number of helper functions for doing
scatter/gather DMA, and various block device related DMA. Currently,
these directly access guest memory using cpu_physical_memory_*(),
assuming no IOMMU translation.
This patch updates this code to use the new universal DMA helper
functions. qemu_sglist_init() now takes a DMAContext * to describe
the DMA address space in which the scatter/gather will take place.
We minimally update the callers qemu_sglist_init() to pass NULL
(i.e. no translation, same as current behaviour). Some of those
callers should pass something else in some cases to allow proper IOMMU
translation in future, but that will be fixed in later patches.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: Crístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* afaerber-or/qom-next-2: (22 commits)
qom: Push error reporting to object_property_find()
qdev: Remove qdev_prop_exists()
qbus: Initialize in standard way
qbus: Make child devices links
qdev: Connect busses with their parent devices
qdev: Convert busses to QEMU Object Model
qdev: Move SysBus initialization to sysbus.c
qdev: Use wrapper for qdev_get_path
qdev: Remove qdev_prop_set_defaults
qdev: Clean up global properties
qdev: Move bus properties to abstract superclasses
qdev: Move bus properties to a separate global
qdev: Push "type" property up to Object
arm_l2x0: Rename "type" property to "cache-type"
m48t59: Rename "type" property to "model"
qom: Assert that public types have a non-NULL parent field
qom: Drop type_register_static_alias() macro
qom: Make Object a type
qom: Add class_base_init
qom: Add object_child_foreach()
...
* kwolf/for-anthony: (39 commits)
qemu-iotests: add 036 autoclear feature bit test
qemu-iotests: add qcow2.py set-feature-bit command
fdc-test: introduced qtest read_without_media
fdc: fix implied seek while there is no media in drive
qcow2: fix autoclear image header update
xen: Don't peek behind the BlockDriverState abstraction
xen: Don't change -drive if=xen device name during machine init
block: Replace bdrv_get_format() by bdrv_get_format_name()
qemu-img: document qed format on qemu-img man page
qemu-iotests: COW with many AIO requests on the same cluster
qemu-iotests: Some backing file COW tests
qcow2: Fix avail_sectors in cluster allocation code
qcow2: Simplify calculation for COW area at the end
qcow2: always operate caches in writeback mode
ide: support enable/disable write cache
block: always open drivers in writeback mode
block: add bdrv_set_enable_write_cache
block: copy enable_write_cache in bdrv_append
savevm: flush after saving vm state
block: flush in writethrough mode after writes
...
* mst/tags/for_anthony:
pci_bridge_dev: fix error path in pci_bridge_dev_initfn()
qdev: release parent properties on dc->init failure
msi: Use msi/msix_present more consistently
msi: Invoke msi/msix_write_config from PCI core
msi: Guard msi/msix_write_config with msi_present
msi: Invoke msi/msix_reset from PCI core
msi: Guard msi_reset with msi_present
ahci: Clean up reset functions
intel-hda: Fix reset of MSI function
ahci: Fix reset of MSI function
rtl8139: honor RxOverflow flag in can_receive method
shpc: unparent device before free
This is far less interesting than it sounds. We simply add an Object to each
BusState and then register the types appropriately. Most of the interesting
refactoring will follow in the next patches.
Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once. Fortunately, not a lot of code is affected.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden. In QOM, instead, these abstract classes are
explicit so we can move bus properties there.
All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.
We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.
The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.
This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types. So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.
Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Simple code movement in order to simplify future refactoring.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Enabling or disabling the write cache is done with the SET FEATURES
command. The command can be issued with sg_sat_set_features from
sg3-utils.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also this functions is better invoked by the core than by each and every
device. This allows to drop the config_write callbacks from ich and
intel-hda.
CC: Alexander Graf <agraf@suse.de>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no point in pushing this burden to the devices, they tend to
forget to call them (like intel-hda, ahci, xhci did). Instead, reset
functions are now called from pci_device_reset. They do nothing if
MSI/MSI-X is not in use.
CC: Alexander Graf <agraf@suse.de>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Properly register reset functions via the device class.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Call msi_reset on device reset as still required by the core.
CC: Alexander Graf <agraf@suse.de>
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After this patch, the libhw* directories will have a hierarchy
that mimics the source tree. This is useful because we do have
a couple of files there that are in the top source directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As in the SATA and AHCI specifications, a FIS is 5 Dwords of 4 bytes
each, which comes to 20 bytes (decimal), not 0x20.
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using Windows 8 with an AHCI disk drive, it issues a blue screen.
The reason is that WIN_SECURITY_FREEZE_LOCK / CFA_WEAR_LEVEL is not
supported by our ATA implementation, but Windows expects it to be there.
Since without security stuff implemented, the lock would be a nop anyway
and CFA_WEAR_LEVEL already is treated as a nop, let's just allow the cmd
for HD drives as well. That way Windows is happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The IDE PIO write sector code path uses bdrv_write() and hence can make
the guest unresponsive while the I/O request is in progress. This patch
converts ide_sector_write() to use bdrv_aio_writev() by using the
BUSY_STAT bit to tell the guest that the request is in progress.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Tested-by: Richard Davies <richard@arachsys.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The IDE PIO interface currently uses bdrv_read() to perform reads
synchronously. Synchronous I/O in the vcpu thread is bad because it
prevents the guest from executing code - it makes the guest
unresponsive.
This patch converts IDE PIO to use bdrv_aio_readv(). We simply need to
use the BUSY_STAT status so the guest knows to wait while we are busy.
The only external user of ide_sector_read() is restart behavior on I/O
errors and it is not affected by this change. We still need to restart
I/O in the same way.
Migration is also unaffected if I understand the code correctly. We
continue to use the same transfer function and the BUSY_STAT status
should never be migrated since we flush I/O before migrating device
state.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Tested-by: Richard Davies <richard@arachsys.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to
determine the direction of DMA it is emulating. We already have a
DMADirection enum designed specifically to encode DMA directions.
This patch uses it for dma_bdrv_io() as well. This involves removing
the DMADirection definition from the #ifdef it was inside, but since that
only existed to protect the definition of dma_addr_t from places where
config.h is not included, there wasn't any reason for it to be there in
the first place.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow the user to specify a disk's World Wide Name.
Linux guests can address disks by their unique World Wide Name number
(e.g. /dev/disk/by-id/wwn-0x5001517959123522). This patch adds support
for assigning a World Wide Name number to a virtual IDE disk.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
strncpy may not null-terminate the destination string.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow the user to override the default disk model name "QEMU HARDDISK".
Some Linux distributions use the /dev/disk/by-id/scsi-SATA_name-of-disk-
model_serial addressing scheme when refering to partitions in /etc/fstab
and elsewhere. This causes problems when starting a disk image taken from
an existing physical server under qemu, because when running under qemu
name-of-disk-model is always "QEMU HARDDISK".
This patch introduces a model=s option which in combination with the
existing serial=s option can be used to fake the disk the operating
system was previously on, allowing the OS to boot properly.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
And remove several block_int.h inclusions that should not be there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most MemoryRegionOps already had the const attribute.
This patch adds it to the remaining ones.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Requesting a read or a write operation on an empty disk can lead
to QEMU dumping core.
Also fix a few braces here and there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp/queue/qmp:
qmp: add DEVICE_TRAY_MOVED event
ide: drop ide_tray_state_post_load()
block: Don't call bdrv_eject() if the tray state didn't change
block: bdrv_eject(): Make eject_flag a real bool
block: Rename bdrv_mon_event() & BlockMonEventAction
This is used to sync the physical tray state after migration when
using CD-ROM passthrough. However, migrating when using passthrough
is broken anyway and shouldn't be supported...
So, drop this function as it causes a problem with the DEVICE_TRAY_MOVED
event, which is going to be introduced by the next commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
It's not needed. Besides we can then assume that bdrv_eject() is
only called when there's a tray state change, which is useful to
the DEVICE_TRAY_MOVED event (going to be added in a future
commit).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
They are QMP events, not monitor events. Rename them accordingly.
Also, move bdrv_emit_qmp_error_event() up in the file. A new event will
be added soon and it's good to have them next each other.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
* stefanha/trivial-patches:
linux-user: brk() debugging
virtio: Remove unneeded g_free() check in virtio_cleanup()
net: remove extra spaces in help messages
fmopl: Fix typo in function name
vl.c: Fix typo in variable name
ide: fix compilation errors when DEBUG_IDE is set
cpu-exec.c: Correct comment about this file and indentation cleanup
CODING_STYLE: Clarify style for enum and function type names
linux-user: fail execve() if env/args too big
* kwolf/for-anthony:
AHCI: Masking of IRQs actually masks them
sheepdog: fix co_recv coroutine context
AHCI: Fix port reset race
rewrite QEMU_BUILD_BUG_ON
qcow2: Keep unknown header extension when rewriting header
qcow2: Update whole header at once
vpc: Round up image size during fixed image creation
vpc: Add support for Fixed Disk type
iSCSI: add configuration variables for iSCSI
qemu-io: add write -z option for bdrv_co_write_zeroes
qed: add .bdrv_co_write_zeroes() support
qed: replace is_write with flags field
block: perform zero-detection during copy-on-read
block: add .bdrv_co_write_zeroes() interface
cutils: extract buffer_is_zero() from qemu-img.c
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When masking IRQ lines, we should actually mask them out and not declare
them active anymore. Once we mask them in again, they are allowed to trigger
again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_cancel() can trigger bdrv_aio_flush() which makes all aio
that is currently in flight finish. So what we do is:
port reset
detect ncq in flight
cancel ncq
delete ncq sg list
at which point we have double freed the sg list. Instead, with this
patch we do:
port reset
detect ncq in flight
cancel ncq
check if we are really still in flight
delete ncq sg list
which makes things work and gets rid of the race.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Limit them to the device_add functionality. Device aliases were a hack based
on the fact that virtio was modeled the wrong way. The mechanism for aliasing
is very limited in that only one alias can exist for any device.
We have to support it for the purposes of compatibility but we only need to
support it in device_add so restrict it to that piece of code.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Use a table for aliases (Paolo)
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Right now, DeviceInfo acts as the class for qdev. In order to switch to a
proper ObjectClass derivative, we need to ween all of the callers off of
interacting directly with the info pointer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for ahci on sysbus.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Back when I made patches introducing dma_addr_t and various PCI DMA
wrapper functions, I made a mistake. The bmdma_addr_{read,write} functions
need to take target_phys_addr_t not dma_addr_t, since they are assigned
to MemoryRegionOps callbacks.
This patch corrects my error.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
NULL is a valid bus/device, so there is no change in behaviour.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The argument is unused and even wrong when the function is called
by ide_handle_rw_error. Drop it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Initially attempted with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
dma_bdrv_io
| dma_bdrv_read
| dma_bdrv_write
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however did not match anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes some unnecessary casts in the PCI IDE device,
introduced by commit 552908fef5
'PCI IDE: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mode page 2A of emulated ATAPI DVD-ROM should have page length 0x14
like SCSI CD-ROM, rather than 0x12.
Mode page length is off by 8, as it should contain the length of the
payload after the first two bytes.
MODE SENSE(6) should be thrown out of ATAPI DVD-ROM emulation. It is
not specified in the ATAPI list of MMC-2, and MMC-5 prescribes to use
MODE SENSE(10). Anyway, its implementation is wrong.
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This updates the PCI IDE device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds to scsi-disk the missing mode page 0x01 for both disk
and CD-ROM drives, and mode page 0x0e for CD drives only.
A few offsets were wrong in atapi.c. Also change the 2Ah mode page to
expose DVD media read capabilities in the IDE cdrom. This lets you run
dvd+rw-mediainfo on the virtual DVD drives.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first two bytes (after the 8-byte ATAPI header) are the mode page
number and the number of bytes after the length field itself. Make
this clear in the code.
The AUDIO_CTL page was filled with wrong values. It is not anymore in
MMC, but at least keep the values sane.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a complement to the previous patch, move definitions for GET EVENT
STATUS NOTIFICATION from the two functions to scsi-defs.h.
The NCR_* constants are just bit values corresponding to the ENC_*
values, with no offsets even, so keep just one copy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The definitions in ide/internal.h are duplicates, since ATAPI commands
actually come from SCSI. Use the ones in scsi-defs.h and move the
missing ones there. Two exceptions:
- MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry"
page in scsi-disk.c. It is unused, so pick the latter.
- GPCMD_* is left in ide/internal.h, at least for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Implement an I/O space index-data register pair as defined by the AHCI
spec, including the corresponding SATA PCI capability and BAR.
This allows real-mode code to access the AHCI registers; real-mode
code cannot address the memory-mapped register space because it is
beyond the first megabyte.
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I've found that FreeBSD AHCI driver doesn't work with AHCI hardware
emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I
see, it clears port's Interrupt Enable register each time when reset of
any level happens. Is is reasonable for the global controller reset. It
is probably not good, but acceptable for FreeBSD driver for the port
hard reset. But it is IMO wrong for the device soft reset. None of real
hardware I know behaves that way.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Member variable is_read is written, but never read
(contrary to its name). Remove it.
Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
change fails while the tray is locked by the guest. eject -f forces
it open and removes any media. Unfortunately, the tray closes again
instantly. Since the lock remains as it is, there is no way to insert
another medium unless the guest voluntarily unlocks.
Fix by leaving the tray open after monitor eject.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To let device models distinguish between eject and load.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should be able to set it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Including it in device models is unclean, including it without a
reason adds insult to injury.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's convenience stuff for block device models, so block.h isn't the
ideal home either, but better than block_int.h.
Permits moving some #include "block_int.h" from device model .h into
.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Need to ask the device, so this requires new BlockDevOps member
is_tray_open().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's a confused mess (see previous commit). No users remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use a subsection, so that migration to older version still works,
provided the tray is closed and unlocked.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive
already has the requested state. cmd_start_stop_unit() fails when
asked to eject while the tray is open and locked. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requires new BlockDevOps member is_medium_locked(). Implement for IDE
and SCSI CD-ROMs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The device model knows best when to accept the guest's eject command.
No need to detour through the block layer.
bdrv_eject() can't fail anymore. Make it void.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We already track it in BlockDriverState. Just like tray open/close
state, we should track it in the device models instead, because it's
device state.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is
open. Unfortunately, there are two different kinds of users, with
conflicting needs.
1. Device models using bdrv_eject(), currently ide-cd and scsi-cd.
They expect bdrv_is_inserted() to reflect the tray status. Commit
4be9762a makes them happy.
2. Code that wants to know whether a BlockDriverState has media, such
as find_image_format(), bdrv_flush_all(). Commit 4be9762a makes them
unhappy. In particular, it breaks flush on VM stop for media ejected
by the guest.
Revert the change to bdrv_is_inserted(). Check the tray status in the
device models instead.
Note on IDE: Since only ATAPI devices have a tray, and they don't
accept ATA commands since the recent commit "ide: Reject ATA commands
specific to drive kinds", checking in atapi.c suffices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We already track it in BlockDriverState since commit 4be9762a. As
discussed in that commit's message, we should track it in the device
device models instead, because it's device state.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"eject" is misleading; it means "eject" when start is clear, but
"load" when start is set. Rename to loej, because that's how MMC-5
calls it, in section 6.40.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ACS-2 Table B.2 explicitly prohibits ATAPI devices from implementing
WIN_RECAL, WIN_READ_EXT, WIN_READDMA_EXT, WIN_READ_NATIVE_MAX,
WIN_MULTREAD_EXT, WIN_WRITE, WIN_WRITE_ONCE, WIN_WRITE_EXT,
WIN_WRITEDMA_EXT, WIN_MULTWRITE_EXT, WIN_WRITE_VERIFY, WIN_VERIFY,
WIN_VERIFY_ONCE, WIN_VERIFY_EXT, WIN_SPECIFY, WIN_MULTREAD,
WIN_MULTWRITE, WIN_SETMULT, WIN_READDMA, WIN_READDMA_ONCE,
WIN_WRITEDMA, WIN_WRITEDMA_ONCE, WIN_FLUSH_CACHE_EXT. Restrict them
to IDE_HD and IDE_CFATA.
Same for CFA_WRITE_SECT_WO_ERASE, CFA_WRITE_MULTI_WO_ERASE. Restrict
them to IDE_CFATA, like the other CFA_ commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No functional change.
It would be nice to have handler functions in the table, like commit
e1a064f9 did for ATAPI. Left for another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Must set the ATAPI device signature, see ATA4 8.27.5.2 Outputs for
PACKET Command feature set devices, and ACS-2 7.36.6 Outputs for
PACKET feature set devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
pci_piix3_xen_ide_unplug() unplugs only disks, not CD-ROMs. It peeks
into the DriveInfo's BlockDriverState to distinguish between the two.
Unclean; use DriveInfo member media_cd, like xen_config_dev_blk().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop WIN_SRST, it has the same value as WIN_DEVICE_RESET.
Drop unused WIN_RESTORE, it has the same value as WIN_RECAL.
Drop codes that are not implemented and long obsolete: WIN_READ_LONG,
WIN_READ_LONG_ONCE, WIN_WRITE_LONG, WIN_WRITE_LONG_ONCE, WIN_FORMAT
(all obsolete since ATA4), WIN_ACKMEDIACHANGE, WIN_POSTBOOT,
WIN_PREBOOT (obsolete since ATA3), WIN_WRITE_SAME (obsolete since
ATA3, code reused for something else in ACS2), WIN_IDENTIFY_DMA
(obsolete since ATA4).
Drop codes that are not implemented and vendor-specific:
EXABYTE_ENABLE_NEST, DISABLE_SEAGATE.
Drop WIN_INIT, it isn't implemented, its value used to be reserved,
and is used for something else since ATA8.
CFA_IDLEIMMEDIATE isn't specific to CFATA. ACS-2 shows it as a
defined command in ATA-1, -2 and -3. Rename to WIN_IDLEIMMEDIATE2.
Mark vendor specific, retired, and obsolete codes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.
This means:
- we do not count internal requests from image formats in addition
to guest originating I/O
- we do not double count I/O ops if the device model handles it
chunk wise
- we only account I/O once it actuall is done
- can extent I/O accounting to synchronous or coroutine I/O easily
- implement I/O latency tracking easily (see the next patch)
I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet. Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The unplug protocol is necessary to support PV drivers in the guest: the
drivers expect to be able to "unplug" emulated disks and nics before
initializing the Xen PV interfaces.
It is responsibility of the guest to make sure that the unplug is done
before the emulated devices or the PV interface start to be used.
We use pci_for_each_device to walk the PCI bus, identify the devices and
disks that we want to disable and dynamically unplug them.
Changes in v2:
- use PCI_CLASS constants;
- replace pci_unplug_device with qdev_unplug;
- do not import hw/ide/internal.h in xen_platform.c;
Changes in v3:
- introduce piix3-ide-xen, that support hot-unplug;
- move the unplug code to hw/ide/piix.c;
- just call qdev_unplug from xen_platform.c to unplug the IDE disks;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Just in case there's still a way how a guest can read out buffers when it's not
supposed to, let's zero the buffers during initialisation so that we don't leak
information to the guest.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This fixes https://bugs.launchpad.net/qemu/+bug/786209:
When the DRQ_STAT bit is set, the IDE core permits both data reads
and data writes, regardless of whether the current transfer was
initiated as a read or write.
This potentially leaks uninitialized host memory into the guest,
if, before doing anything else to an IDE device, the guest begins a
write transaction (e.g. WIN_WRITE), but then *reads* from the IO
port instead of writing to it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for TRIM sub function of the data set management command,
and wire it up to the qemu discard infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a failed PIO request caused the VM to stop, we still need to transfer the
PIO state even though DRQ=0 at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding the werror=stop mode, some flags were added to s->status
which are used to determine what kind of operation should be restarted
when the VM is continued.
Unfortunately, it turns out that s->status is in fact a device register
and as such is visible to the guest (some of the abused bits are even
writable for the guest).
For migration we keep on using the old VMState field (renamed to
migration_compat_status) if the status register doesn't use any of the
previously abused bits. If it does, we use a subsection with a clean copy of
the status register.
The error status is always sent in a subsection if there is any error. It can't
use the old field because errors happen even without PCI.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BM_STATUS_INT is automatically set during ide_set_irq(), there's no reason to
set it manually in addition.
There is even one case where the interrupt status bit was set, but no IRQ was
raised. This is when the PRD table was reached but there is more data to
transfer. The correct behaviour for this case is not to set BM_STATUS_INT.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AHCI provides two ways of reading/writing data:
1) NCQ
2) ATA commands with the LBA in the command FIS
In the second code path, we didn't handle any LBAs that were bigger than
16 bits, so whenever a guest that used high LBA numbers wanted to access
data, the LBA got truncated down to 16 bits, giving the guest garbage.
This patch adds support for LBAs higher than 16 bits. I've tested that it
works just fine with SeaBIOS and Linux guests. This patch also unbreaks
the often reported grub errors people have seen with AHCI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
