This will let us simplify the code that initializes CPU class
methods, when we move cpu_exec_*() to a separate struct.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201212155530.23098-11-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move invocation of CPUClass.cpu_exec_*() to separate helpers,
to make it easier to refactor that code later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201212155530.23098-10-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit efc6c070ac ("configure: Add a test for the
minimum compiler version") the minimum compiler version
required for GCC is 4.8.
We can safely remove the special case for GCC 4.6 introduced
in commit 0448f5f8b8 ("cpu-exec: Fix compiler warning
(-Werror=clobbered)").
No change for Clang as we don't know.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201210134752.780923-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kernel KVM_CLEAR_DIRTY_LOG interface has align requirement on both the
start and the size of the given range of pages. We have been careful to
handle the unaligned cases when performing CLEAR on one slot. But it seems
that we forget to take the unaligned *size* case into account when
preparing bitmap for the interface, and we may end up clearing dirty status
for pages outside of [start, start + size).
If the size is unaligned, let's go through the slow path to manipulate a
temp bitmap for the interface so that we won't bother with those unaligned
bits at the end of bitmap.
I don't think this can happen in practice since the upper layer would
provide us with the alignment guarantee. I'm not sure if kvm-all could rely
on it. And this patch is mainly intended to address correctness of the
specific algorithm used inside kvm_log_clear_one_slot().
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201208114013.875-1-yuzenghui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpu-exec tries to execute TB without caching when current
icount budget is over. But sometimes refilled budget is big
enough to try executing cached blocks.
This patch checks that instruction budget is big enough
for next block execution instead of just running cpu_exec_nocache.
It halves the number of calls of cpu_exec_nocache function
during tested OS boot scenario.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Message-Id: <160741865825.348476.7169239332367828943.stgit@pasha-ThinkPad-X280>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '-tb-size' option (replaced by '-accel tcg,tb-size') is
deprecated since 5.0 (commit fe17413247). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201202112714.1223783-1-philmd@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Machine options can be retrieved as properties of the machine object.
Encourage that by removing the "easy" accessor to machine options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
after the initial split into 3 tcg variants, we proceed to also
split tcg_start_vcpu_thread.
We actually split it in 2 this time, since the icount variant
just uses the round robin function.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201015143217.29337-3-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
split up the CpusAccel tcg_cpus into three TCG variants:
tcg_cpus_rr (single threaded, round robin cpus)
tcg_cpus_icount (same as rr, but with instruction counting enabled)
tcg_cpus_mttcg (multi-threaded cpus)
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201015143217.29337-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201110192316.26397-7-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Elena Afanasova <eafanasova@gmail.com>
Message-Id: <20201017210102.26036-1-eafanasova@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When using -icount, it's useful for the CPU_LOG_EXEC logging
to include information about when cpu_io_recompile() was
called, because it alerts the reader of the log that the
tracing of a previous TB execution may not actually
correspond to an actually executed instruction. For instance
if you're using -icount and also -singlestep then a guest
instruction that makes an IO access appears in two
"Trace" lines, once in a TB that triggers the cpu_io_recompile()
and then again in the TB that actually executes.
(This is a similar reason to why the "Stopped execution of
TB chain before..." logging in cpu_tb_exec() is helpful
when trying to track execution flow in the logs.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201013122658.4620-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we introduced CPU hot-unplug in sPAPR, we don't unrealize the
vCPU objects explicitly. Instead, we let QOM handle that for us under
object_property_del_all() when the CPU core object is finalized. The
only thing we do is calling cpu_remove_sync() to tear the vCPU thread
down.
This happens to work but it is ugly because:
- we call qdev_realize() but the corresponding qdev_unrealize() is
buried deep in the QOM code
- we call cpu_remove_sync() to undo qemu_init_vcpu() called by
ppc_cpu_realize() in target/ppc/translate_init.c.inc
- the CPU init and teardown paths aren't really symmetrical
The latter didn't bite us so far but a future patch that greatly
simplifies the CPU core realize path needs it to avoid a crash
in QOM.
For all these reasons, have ppc_cpu_unrealize() to undo the changes
of ppc_cpu_realize() by calling cpu_remove_sync() at the right place,
and have the sPAPR CPU core code to call qdev_unrealize().
This requires to add a missing stub because translate_init.c.inc is
also compiled for user mode.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160279671236.1808373.14732005038172874990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Xen was broken by commit 1583a38988 ("cpus: extract out qtest-specific
code to accel/qtest"). Xen relied on qemu_init_vcpu() calling
qemu_dummy_start_vcpu() in the default case, but that was replaced by
g_assert_not_reached().
Add a minimal "CpusAccel" for Xen using the dummy-cpus implementation
used by qtest.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-4-jandryuk@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move and rename accel/qtest/qtest-cpus.c files to accel/dummy-cpus.c so
it can be re-used by Xen.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-3-jandryuk@gmail.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
dummy-cpus.c is only compiled with CONFIG_POSIX, so the _WIN32 condition
will never evaluate true. Remove it.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-2-jandryuk@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On ARM, the Top Byte Ignore feature means that only 56 bits of
the address are significant in the virtual address. We are
required to give the entire 64-bit address to FAR_ELx on fault,
which means that we do not "clean" the top byte early in TCG.
This new interface allows us to flush all 256 possible aliases
for a given page, currently missed by tlb_flush_page*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201016210754.818257-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Detect all MIPS store instructions in cpu_signal_handler for all available
MIPS versions, and set is_write if encountering such store instructions.
This fixed the error while dealing with self-modified code for MIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Kele Huang <kele.hwang@gmail.com>
Signed-off-by: Xu Zou <iwatchnima@gmail.com>
Message-Id: <20201002081420.10814-1-kele.hwang@gmail.com>
[rth: Use uintptr_t for pc to fix n32 build error.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub.
Reverse step is intended to step one instruction in the backwards
direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of
the prior snapshots and proceed to the desired step. It is equivalent
to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of
the replay log.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
--
v4 changes:
- inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée)
Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt poll is not a real interrupt event. It is needed only for
thread safety. This interrupt is used for i386 and converted
to hardware interrupt by cpu_handle_interrupt function.
Therefore it is not needed to be recorded, because hardware
interrupt will be recorded after converting.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
--
v4 changes:
- Condition check refactoring (suggested by Alex Bennée)
Message-Id: <160174517124.12451.12983410242461131737.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
current_machine is always set before accelerators are initialized,
so use that instead of MACHINE(qdev_get_machine()).
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the error handling in kvm_init_vcpu so we can see what went
wrong more easily.
Make it take an Error ** and fill it out with what failed, including
the cpu id, so you can tell if it only fails at a given ID.
Replace the remaining DPRINTF by a trace.
This turns a:
kvm_init_vcpu failed: Invalid argument
into:
kvm_init_vcpu: kvm_get_vcpu failed (256): Invalid argument
and with the trace you then get to see:
19049@1595520414.310107:kvm_init_vcpu index: 169 id: 212
19050@1595520414.310635:kvm_init_vcpu index: 170 id: 256
qemu-system-x86_64: kvm_init_vcpu: kvm_get_vcpu failed (256): Invalid argument
which makes stuff a lot more obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200723160915.129069-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for KVM as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for qtest as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG is the first accelerator to register a "CpusAccel" interface
on initialization, providing functions for starting a vcpu,
kicking a vcpu, sychronizing state and getting virtual clock
and ticks.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of creating GStrings and passing them into log_disas,
just print the annotations directly in tb_gen_code.
Fix the annotations for the slow paths of the TB, after the
part implementing the final guest instruction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move hardware stubs unrelated from the accelerator to xen-hw-stub.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is only meanful to initialize a X86/PC machine,
rename it as xen_hvm_init_pc().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Last uses of memory_region_clear_global_locking() have been
removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked")
and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O
path to TLB path").
Remove memory_region_clear_global_locking() and the now unused
'global_locking' field in MemoryRegion.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200806150726.962-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This has no functional change.
The current function structure is:
inline QEMU_ALWAYSINLINE
store_memop() {
switch () {
...
default:
qemu_build_not_reached();
}
}
inline QEMU_ALWAYSINLINE
store_helper() {
...
if (span_two_pages_or_io) {
...
helper_ret_stb_mmu();
}
store_memop();
}
helper_ret_stb_mmu() {
store_helper();
}
Whereas GCC will generate an error at compile-time when an always_inline
function is not inlined, Clang does not. Nor does Clang prioritize the
inlining of always_inline functions. Both of these are arguably bugs.
Both `store_memop` and `store_helper` need to be inlined and allow
constant propogations to eliminate the `qemu_build_not_reached` call.
However, if the compiler instead chooses to inline helper_ret_stb_mmu
into store_helper, then store_helper is now self-recursive and the
compiler is no longer able to propagate the constant in the same way.
This does not produce at current QEMU head, but was reproducible
at v4.2.0 with `clang-10 -O2 -fexperimental-new-pass-manager`.
The inline recursion problem can be fixed solely by marking
helper_ret_stb_mmu as noinline, so the compiler does not make an
incorrect decision about which functions to inline.
In addition, extract store_helper_unaligned as a noinline subroutine
that can be shared by all of the helpers. This saves about 6k code
size in an optimized x86_64 build.
Reported-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Eduardo Habkost
Philippe Mathieu-Daudé
Zenghui Yu
Pavel Dovgalyuk
Paolo Bonzini
Claudio Fontana
Peter Maydell
Alex Bennée
Elena Afanasova
Greg Kurz
Jason Andryuk
Richard Henderson
Kele Huang
Pavel Dovgalyuk
Dr. David Alan Gilbert
Stefan Hajnoczi
zhaolichang
Daniel P. Berrangé