Commit Graph

137 Commits

Author SHA1 Message Date
Frédéric Pétrot 2b5470843a target/riscv: array for the 64 upper bits of 128-bit registers
The upper 64-bit of the 128-bit registers have now a place inside
the cpu state structure, and are created as globals for future use.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-7-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot a1a3aac448 target/riscv: separation of bitwise logic and arithmetic helpers
Introduction of a gen_logic function for bitwise logic to implement
instructions in which no propagation of information occurs between bits and
use of this function on the bitwise instructions.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-6-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot 344b4a82fc target/riscv: additional macros to check instruction support
Given that the 128-bit version of the riscv spec adds new instructions, and
that some instructions that were previously only available in 64-bit mode
are now available for both 64-bit and 128-bit, we added new macros to check
for the processor mode during translation.
Although RV128 is a superset of RV64, we keep for now the RV64 only tests
for extensions other than RVI and RVM.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-5-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frank Chang cc13aa3614 target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing instructions
SEW has the limitation which cannot exceed ELEN.

Widening instructions have a destination group with EEW = 2*SEW
and narrowing instructions have a source operand with EEW = 2*SEW.
Both of the instructions have the limitation of: 2*SEW <= ELEN.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-78-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang f714361ed7 target/riscv: rvv-1.0: implement vstart CSR
* Update and check vstart value for vector instructions.
* Add whole register move instruction helper functions as we have to
  call helper function for case where vstart is not zero.
* Remove probe_pages() calls in vector load/store instructions
  (except fault-only-first loads) to raise the memory access exception
  at the exact processed vector element.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-67-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang 75804f7131 target/riscv: add "set round to odd" rounding mode helper function
helper_set_rounding_mode() is responsible for SIGILL, and "round to odd"
should be an interface private to translation, so add a new independent
helper_set_rod_rounding_mode().

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-64-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang 33f1beaf12 target/riscv: rvv-1.0: add fractional LMUL
Introduce the concepts of fractional LMUL for RVV 1.0.
In RVV 1.0, LMUL bits are contiguous in vtype register.

Also rearrange rvv bits in TB_FLAGS to skip MSTATUS_VS (0x600)
and MSTATUS_FS (0x6000) bits.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-14-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang f9298de514 target/riscv: rvv-1.0: remove MLEN calculations
As in RVV 1.0 design, MLEN is hardcoded with value 1 (Section 4.5).
Thus, remove all MLEN related calculations.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-13-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang 8e1ee1fb57 target/riscv: rvv-1.0: add translation-time vector context status
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-8-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang 2d258b428b target/riscv: zfh: implement zfhmin extension
Zfhmin extension is a subset of Zfh extension, consisting only of data
transfer and conversion instructions.

If enabled, only the following instructions from Zfh extension are
included:
  * flh, fsh, fmv.x.h, fmv.h.x, fcvt.s.h, fcvt.h.s
  * If D extension is present: fcvt.d.h, fcvt.h.d

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-8-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng 7b03c8e5b5 target/riscv: zfh: half-precision convert and move
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-4-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng 915f77b211 target/riscv: zfh: half-precision load and store
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211210074329.5775-2-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Anatoly Parshintsev 0774a7a1ff target/riscv: Implement address masking functions required for RISC-V Pointer Masking extension
Signed-off-by: Anatoly Parshintsev <kupokupokupopo@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-8-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28 14:39:23 +10:00
Alexey Baturo c655df7fe0 target/riscv: Support pointer masking for RISC-V for i/c/f/d/a types of instructions
Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-7-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28 14:39:23 +10:00
Richard Henderson b550f89457 target/riscv: Compute mstatus.sd on demand
The position of this read-only field is dependent on the current xlen.
Rather than having to compute that difference in many places, compute
it only on read.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:47 +10:00
Richard Henderson a0245d91dd target/riscv: Use gen_shift*_per_ol for RVB, RVI
Most shift instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:47 +10:00
Richard Henderson fdab665f6e target/riscv: Use gen_unary_per_ol for RVB
The count zeros instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:47 +10:00
Richard Henderson 80347ae9f2 target/riscv: Use gen_arith_per_ol for RVM
The multiply high-part instructions require a separate
implementation for RV32 when TARGET_LONG_BITS == 64.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:43 +10:00
Richard Henderson 7667cafd5a target/riscv: Replace DisasContext.w with DisasContext.ol
In preparation for RV128, consider more than just "w" for
operand size modification.  This will be used for the "d"
insns from RV128 as well.

Rename oper_len to get_olen to better match get_xlen.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson 905b9fcde1 target/riscv: Replace is_32bit with get_xl/get_xlen
In preparation for RV128, replace a simple predicate
with a more versatile test.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson 92371bd903 target/riscv: Add MXL/SXL/UXL to TB_FLAGS
Begin adding support for switching XLEN at runtime.  Extract the
effective XLEN from MISA and MSTATUS and store for use during translation.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-6-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson e91a7227cb target/riscv: Split misa.mxl and misa.ext
The hw representation of misa.mxl is at the high bits of the
misa csr.  Representing this in the same way inside QEMU
results in overly complex code trying to check that field.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Frank Chang 61d5649488 target/riscv: fix TB_FLAGS bits overlapping bug for rvv/rvh
TB_FLAGS mem_idx bits was extended from 2 bits to 3 bits in
commit: c445593, but other TB_FLAGS bits for rvv and rvh were
not shift as well so these bits may overlap with each other when
rvv is enabled.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211015074627.3957162-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson 273b68b104 target/riscv: Remove exit_tb and lookup_and_goto_ptr
GDB single-stepping is now handled generically, which means
we don't need to do anything in the wrappers.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-15 16:39:14 -07:00
Frank Chang a88f040239 target/riscv: Set mstatus_hs.[SD|FS] bits if Clean and V=1 in mark_fs_dirty()
When V=1, both vsstauts.FS and HS-level sstatus.FS are in effect.
Modifying the floating-point state when V=1 causes both fields to
be set to 3 (Dirty).

However, it's possible that HS-level sstatus.FS is Clean and VS-level
vsstatus.FS is Dirty at the time mark_fs_dirty() is called when V=1.
We can't early return for this case because we still need to set
sstatus.FS to Dirty according to spec.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210921020234.123448-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich 7e68e6c79b target/riscv: Add a REQUIRE_32BIT macro
With the changes to Zb[abcs], there's some encodings that are
different in RV64 and RV32 (e.g., for rev8 and zext.h). For these,
we'll need a helper macro allowing us to select on RV32, as well.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-13-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Ilya Leoshkevich 4e116893c6 accel/tcg: Add DisasContextBase argument to translator_ld*
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14 12:00:20 -07:00
Richard Henderson 8e034ae44d target/riscv: Use {get,dest}_gpr for RVV
Remove gen_get_gpr, as the function becomes unused.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-25-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson 89c883091f target/riscv: Use DisasExtend in shift operations
These operations are greatly simplified by ctx->w, which allows
us to fold gen_shiftw into gen_shift.  Split gen_shifti into
gen_shift_imm_{fn,tl} like we do for gen_arith_imm_{fn,tl}.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson 6090391505 target/riscv: Add DisasExtend to gen_unary
Use ctx->w for ctpopw, which is the only one that can
re-use the generic algorithm for the narrow operation.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson f84ed8c2df target/riscv: Move gen_* helpers for RVB
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvb.c.inc.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson b66a0585f0 target/riscv: Move gen_* helpers for RVM
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvm.c.inc.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson afbbec8201 target/riscv: Remove gen_arith_div*
Use ctx->w and the enhanced gen_arith function.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson 191d1dafae target/riscv: Add DisasExtend to gen_arith*
Most arithmetic does not require extending the inputs.
Exceptions include division, comparison and minmax.

Begin using ctx->w, which allows elimination of gen_addw,
gen_subw, gen_mulw.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson ecda15d137 target/riscv: Introduce DisasExtend and new helpers
Introduce get_gpr, dest_gpr, temp_new -- new helpers that do not force
tcg globals into temps, returning a constant 0 for $zero as source and
a new temp for $zero as destination.

Introduce ctx->w for simplifying word operations, such as addw.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-6-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson 867c81968a target/riscv: Add DisasContext to gen_get_gpr, gen_set_gpr
We will require the context to handle RV64 word operations.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson 4a083b563a target/riscv: Clean up division helpers
Utilize the condition in the movcond more; this allows some of
the setcond that were feeding into movcond to be removed.
Do not write into source1 and source2.  Re-name "condN" to "tempN"
and use the temporaries for more than holding conditions.

Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson 05b80ed0a1 target/riscv: Use tcg_constant_*
Replace uses of tcg_const_* with the allocate and free close together.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-2-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson b5cf742841 accel/tcg: Remove TranslatorOps.breakpoint_check
The hook is now unused, with breakpoints checked outside translation.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21 07:47:05 -10:00
Richard Henderson c54d50c1d6 target/riscv: Use translator_use_goto_tb
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09 09:42:28 -07:00
Alistair Francis 65d1a2bd3e target/riscv: Use target_ulong for the DisasContext misa
The is_32bit() check in translate.c expects a 64-bit guest to have a
64-bit misa value otherwise the macro check won't work. This patches
fixes that and fixes a Coverity issue at the same time.

Fixes: CID 1453107
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: c00176c7518c2a7b4de3eec320b6a683ab56f705.1622435221.git.alistair.francis@wdc.com
2021-06-24 05:00:12 -07:00
Kito Cheng 3a4a43e4e2 target/riscv: rvb: add/shift with prefix zero-extend
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-16-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Kito Cheng 920a1f9955 target/riscv: rvb: address calculation
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-15-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang c24f0422fb target/riscv: rvb: generalized or-combine
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-14-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang 831ec7f3d1 target/riscv: rvb: generalized reverse
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-13-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Kito Cheng e58529a8d0 target/riscv: rvb: rotate (left/right)
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-12-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Kito Cheng 91d8fc6768 target/riscv: rvb: shift ones
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-11-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang 23cd17773b target/riscv: rvb: single-bit instructions
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-10-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang 981d3568df target/riscv: add gen_shifti() and gen_shiftiw() helper functions
Add gen_shifti() and gen_shiftiw() helper functions to reuse the same
interfaces for immediate shift instructions.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-9-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Kito Cheng 6ef5843182 target/riscv: rvb: pack two words into one register
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-6-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00