ALU instructions can write to both memory and flags. If the CC_SRC*
and CC_DST locations have been written already when a memory access
causes a fault, the value in CC_SRC* and CC_DST might be interpreted
with the wrong CC_OP (the one that is in effect before the instruction.
Besides just using the wrong result for the flags, something like
subtracting -1 can have disastrous effects if the current CC_OP is
CC_OP_EFLAGS: this is because QEMU does not expect bits outside the ALU
flags to be set in CC_SRC, and env->eflags can end up set to all-ones.
In the case of the attached testcase, this sets IOPL to 3 and would
cause an assertion failure if SUB is moved to the new decoder.
This mechanism is not really needed for BMI instructions, which can
only write to a register, but put it to use anyway for cleanliness.
In the case of BZHI, the code has to be modified slightly to ensure
that decode->cc_src is written, otherwise the new assertions trigger.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fixture buys us exactly nothing, as we need a global variable
anyway, for test_qapi_event_emit(). Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-4-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generated qapi_event_send_FOO() call an event emitter function.
It's test_qapi_event_emit() in this test. It compares the actual
event to the expected event, and sets a flag to record it was called.
The test functions set expected data and clear the flag before calling
qapi_event_send_FOO(), and check the flag afterwards.
Make test_qapi_event_emit() consume expected data, and the test
functions check it was consumed. Delete the flag. This is simpler.
It also catches extraneous calls of test_qapi_event_emit(). Catching
that is not worthwhile, but since the cost is negative...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-3-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mutex @test_event_lock is held from fixture setup to teardown,
protecting global variable @test_event_data. But tests always run one
after the other, so this is superfluous. It also confuses Coverity.
Drop the mutex.
Fixes: CID 1527425
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-2-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_pwm-test can take quite a while when running with
--enable-debug on a loaded system. The tests here are quite
repetitive - by default it should be fine if we only execute
some of them and only execute all when running in slow testing mode.
Message-ID: <20231215143524.49241-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The migration stream on s390x contains data for the storage_attributes
which the analyze-migration.py cannot handle yet. Add the basic code
for handling this, so we can re-enable the check in the migration-test.
Message-ID: <20231120113951.162090-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Type names should not contain special characters like ":" (so that
they are easier to use with QAPI and other parts). We are going to
forbid such names in an upcoming patch. Thus let's replace the ":"
here with a "-".
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231117114457.177308-5-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I missed this when going through the recent failure logs. I can run
the test 30 times without failure locally but it seems to hang pretty
reliably on GitLab's CI infra-structure.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231201201027.2689404-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These variables "ret" are never referenced in the code, thus
add check logic for the "ret"
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231121080802.4500-1-zhujun2@cmss.chinamobile.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use 'unsupported_configs' and 'tested_configs' here
instead of non-inclusive words.
Message-ID: <20231122084000.809696-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
wHXYpLbD5jkthqav5E0DObCF9gIZdA==
=qtvU
-----END PGP SIGNATURE-----
Merge tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu into staging
Flaky avocado tests, gdbstub and gitlab tweaks
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
# KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
# YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
# ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
# 486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
# t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
# wHXYpLbD5jkthqav5E0DObCF9gIZdA==
# =qtvU
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Dec 2023 12:48:08 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu:
gitlab: add optional job to run flaky avocado tests
gitlab: build the correct microblaze target
tests/avocado: tag sbsa tests as tcg only
docs/devel: rationalise unstable gitlab tests under FLAKY_TESTS
gdbstub: use a better signal when we halt for IO reasons
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.
This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.
When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.
This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.
CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
One problem with flaky tests is they often only fail under CI
conditions which makes it hard to debug. We add an optional allow_fail
job so developers can trigger the only the flaky tests in the CI
environment if they are debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-8-alex.bennee@linaro.org>
As firmware runs at a higher privilege level than the hypervisor we
can only run these tests under TCG emulation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-6-alex.bennee@linaro.org>
It doesn't make sense to have two classes of flaky tests. While it may
take the constrained environment of CI to trigger failures easily it
doesn't mean they don't occasionally happen on developer machines. As
CI is the gating factor to passing there is no point developers
running the tests locally anyway unless they are trying to fix things.
While we are at it update the language in the docs to discourage the
QEMU_TEST_FLAKY_TESTS becoming a permanent solution.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-3-alex.bennee@linaro.org>
netdev test keeps failing sometimes.
I don't think we should increase the timeout some more:
let's try something else instead, testing how busy the
system is.
Seems to work for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the text description file is larger than DESC_SIZE, we force the last
byte in the buffer to be 0 and write it out.
This results in a corruption.
Try to allocate a big buffer in this case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1923
Signed-off-by: Fam Zheng <fam@euphon.net>
Message-ID: <20231124115654.3239137-1-fam@euphon.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The machine type is being detected based on "-M help" output, and we're
searching for the line ending with " (default)". However, in downstream
one of the machine types s marked as deprecated might become the
default, in which case this logic breaks as the line would now end with
" (default) (deprecated)". To fix potential issues here, let's relax
that requirement and detect the mere presence of " (default)" line
instead.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20231122121538.32903-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit edac4d8a16 back in 2015 when we added support for
the virtual timer offset CNTVOFF_EL2, we didn't correctly update
the timer-recalculation code that figures out when the timer
interrupt is next going to change state. We got it wrong in
two ways:
* for the 0->1 transition, we didn't notice that gt->cval + offset
can overflow a uint64_t
* for the 1->0 transition, we didn't notice that the transition
might now happen before the count rolls over, if offset > count
In the former case, we end up trying to set the next interrupt
for a time in the past, which results in QEMU hanging as the
timer fires continuously.
In the latter case, we would fail to update the interrupt
status when we are supposed to.
Fix the calculations in both cases.
The test case is Alex Bennée's from the bug report, and tests
the 0->1 transition overflow case.
Fixes: edac4d8a16 ("target-arm: Add CNTVOFF_EL2")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Upgrade libvirt-ci so it covers macOS 14. Add a manual entry
(QEMU_JOB_OPTIONAL: 1) to test on Sonoma release. Refresh the
lci-tool generated files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231109160504.93677-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the content of $mkvenv_flags (which is either "--online"
or empty) down to tests/Makefile.include.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The reason the ppc64 and s390x test where failing was because gdb
hides them although they are still accessible via regnum. We can
re-arrange the test a little bit and include these two arches in our
test.
We also need to be a bit more careful handling remote-registers as the
format isn't easily parsed with pure white space separation. Once we
fold types like "long long" and "long double" into a single word we
can now assert all registers are either listed or elided.
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <qemu-s390x@nongnu.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: <qemu-ppc@nongnu.org>
Cc: Luis Machado <luis.machado@arm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231121153606.542101-1-alex.bennee@linaro.org>
This still remains a MANUAL test due to blocking issues.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-13-alex.bennee@linaro.org>
To make it easier to test 32 bit Arm softmmu issues implement a basic
boot.S so we can build the multiarch tests. Currently CHECK_UNALIGNED
is disabled as I haven't got the right magic set for it to work.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-12-alex.bennee@linaro.org>
Prepare for expanding the arm system tests by cleaning up the test
directory.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-11-alex.bennee@linaro.org>
We need to ensure we squash the serial port if we want to hand craft
our muxed input. As a bonus emit the example with a V=1 build to make
it easier for people to figure out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-7-alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1972
Cross compile gcc is more picky about argument order than msys. Changed
the meson command to take the (now renamed) libqemu_plugin_api.a as a
lib, rather than an object. This puts it in the right place on both
native and cross compile gcc commands
Reenable plugins on crossbuilds
Signed-off-by: Greg Manning <gmanning@rapitasystems.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231109124326.21106-2-gmanning@rapitasystems.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-5-alex.bennee@linaro.org>
debian-native isn't really needed and suffers from the problem of
tracking a distros dependencies rather than the projects. With a
little surgery we can make the debian-amd64 container architecture
neutral and allow people to use it to build a native QEMU.
Rename it so it follows the same non-arch pattern of the other distro
containers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-4-alex.bennee@linaro.org>
macOS 14 "Sonoma" was released on September 2023 [1].
According to QEMU's support policy, we stop supporting the
previous major release two years after the the new major
release has been published. Replace the macOS 12 (Monterey)
testing by macOS 13 (Ventura, released on October 2022, [2]).
Refresh the generated files by running:
$ make lcitool-refresh
[1] https://www.apple.com/newsroom/2023/09/macos-sonoma-is-available-today/
[2] https://www.apple.com/newsroom/2022/10/macos-ventura-is-now-available/
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20231108162022.76189-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-3-alex.bennee@linaro.org>
Fedora is gradually killing off i386 packages in its repos, via a
death-by-1000-cuts process. Thus Debian looks like a better long
term bet for i686 build testing. It has the added advantage that
we can generate it via lcitool too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231107164109.1449014-1-berrange@redhat.com>
[AJB: tweak commit msg, set correct prefix]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-2-alex.bennee@linaro.org>
This reverts commit c4d74ab24a.
The reverse debugging test is sometimes still failing. See:
https://gitlab.com/qemu-project/qemu/-/issues/1992
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121100842.677363-1-thuth@redhat.com>
This tests two parallel stream jobs that will complete around the same
time and run on two different disks in the same iothreads. It is loosely
based on the bug report at https://issues.redhat.com/browse/RHEL-1761.
For me, this test hangs reliably with the originally reported bug in
blk_remove_bs(). After fixing it, it intermittently hangs for the bugs
fixed after it, missing AioContext unlocking in bdrv_graph_wrunlock()
and in stream_prepare(). The deadlocks seem to happen more frequently
when the test directory is on tmpfs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch below fixes a bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2
macros in target/ppc/fpu_helper.c where a non-NaN floating point value from the
source vector is incorrectly converted to 0, 0x80000000, or 0x8000000000000000
instead of the expected value if a preceding source floating point value from
the same source vector was a NaN.
The bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros in
target/ppc/fpu_helper.c was introduced with commit c3f24257e3.
This patch also adds a new vsx_f2i_nan test in tests/tcg/ppc64 that checks that
the VSX xvcvspsxws, xvcvspuxws, xvcvspsxds, xvcvspuxds, xvcvdpsxws, xvcvdpuxws,
xvcvdpsxds, and xvcvdpuxds instructions correctly convert non-NaN floating point
values to integer values if the source vector contains NaN floating point values.
Fixes: c3f24257e3 ("target/ppc: Clear fpstatus flags on helpers missing it")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1941
Signed-off-by: John Platts <john_platts@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Like replay_linux.py, reverse_debugging.py starts the vm with console
set but does not interact with it (e.g., with wait_for_console_pattern).
In this situation, the console should have a drainer attached so the
socket does not fill. replay_linux.py has a drainer, but it is missing
from reverse_debugging.py.
Per analysis in Link: this can cause the console socket/pipe to fill and
QEMU get stuck in qemu_chr_write_buffer, leading to strange test case
failures (ppc64 fails because it prints a lot to console in early bios).
Attaching a drainer prevents this.
Note, this commit does not fix bugs introduced by the commits referenced
in the first two Fixes: tags, but together those commits conspire to
irritate the problem and cause test case failure, which this commit
fixes.
Link: https://lore.kernel.org/qemu-devel/ZVT-bY9YOr69QTPX@redhat.com/
Fixes: 1d4796cd00 ("python/machine: use socketpair() for console connections")
Fixes: 761a13b239 ("tests/avocado: ppc64 reverse debugging tests for pseries and powernv")
Fixes: be52eca309 ("tests/acceptance: add reverse debugging test")
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20231116115354.228678-1-npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231116061956.14676-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's failing very often, so don't run this by default anymore
until it gets fixed.
Message-ID: <20231114153019.295131-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a perfect world we'd have reproducible tests,
but then we'd be sure we run the same binaries.
If a binary artifact isn't hashed, we have no idea
what we are running. Therefore enforce hashing for
all our artifacts.
With this change, unhashed artifacts produce:
$ avocado run tests/avocado/multiprocess.py
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
ERROR: QemuBaseTest.fetch_asset() missing 1 required positional argument: 'asset_hash' (0.19 s)
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20231115205149.90765-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The multiprocess test is currently succeeding with an annoying warning:
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
WARN: Test passed but there were warnings during execution. Check
the log for details
In the log, you can find an entry like:
WARNI| No hash provided. Cannot check the asset file integrity.
Add the proper asset hashes to avoid those warnings.
Message-ID: <20231115145852.494052-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The intel_iommu test is currently succeeding with annoying warnings.
Add the proper asset hashes to avoid those.
Message-ID: <20231114143531.291820-1-thuth@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "edid" feature has been added to vhost-user-gpu in commit
c06444261e ("contrib/vhost-user-gpu: implement get_edid feature"),
so waiting for "features: +virgl -edid" in the test does not work
anymore, it's "+edid" instead of "-edid" now!
While we're at it, move the expected string to the preceeding
exec_command_and_wait_for_pattern() instead (since waiting for
empty string here does not make too much sense).
Message-ID: <20231114203456.319093-1-thuth@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertRegexpMatches() has been removed in Python 3.12 and should be replaced by
assertRegex(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114144832.71612-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
