Commit Graph

23 Commits

Author SHA1 Message Date
Peter Maydell c888f7e0fd target/arm: Use correct GDB XML for M-profile cores
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.

Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores.  The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.

Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
2020-05-14 15:03:08 +01:00
KONRAD Frederic a976ed3ffd target/m68k: fix gdb for m68xxx
Currently "cf-core.xml" is sent to GDB when using any m68k flavor.  Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.

This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:

(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes):    \
  00000000000[...]0000

With this patch: qemu-system-m68k -M none -cpu m68020 -s -S

(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically.  Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)

Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
2020-05-06 09:29:26 +01:00
Yoshinori Sato 27a4a30e29 target/rx: CPU definitions
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use newer QOM style, split cpu-qom.h, restrict access to
 extable array, use rx_cpu_tlb_fill() extracted from patch of
 Yoshinori Sato 'Convert to CPUClass::tlb_fill', call cpu_reset
 after qemu_init_vcpu, make rx_crname a function]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200224141923.82118-7-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use GByteArray in gdbstub (rebase commit a010bdbe),
 use device_class_set_parent_reset (rebase commit 781c67ca)]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-03-19 17:58:05 +01:00
Jonathan Behrens ab9056ff9b
target/riscv: Expose "priv" register for GDB for reads
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.

Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:29 -07:00
Jim Wilson c670970dc0
RISC-V: Add 64-bit gdb xml files.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19 05:13:24 -07:00
Jim Wilson 1a987a1d5f
RISC-V: Add 32-bit gdb xml files.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19 05:13:24 -07:00
Doug Gale 7b0f97bade gdbstub: Fix i386/x86_64 machine description and add control registers
The machine description we send is being (silently) thrown on the floor
by GDB and GDB silently uses the default machine description, because
the xml parse fails on <feature> nested within <feature>.
Changes to the xml in qemu source code have no effect.

In addition, the default machine description has fs_base, which fails to
be retrieved, which breaks the whole register window.  Add it and the
other control registers.

Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20190124040457.2546-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:18 +01:00
Christian Borntraeger 86158a2a2b s390x/gdb: add gs registers
Let's provide the guarded storage registers via gdb server.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Laurent Vivier 5a4526b26a target-m68k: define 96bit FP registers for gdb on 680x0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170620205121.26515-5-laurent@vivier.eu>
2017-06-21 22:11:12 +02:00
Abdallah Bouassida b8158192fa target/i386: Add GDB XML description for SSE registers
Add an XML description for SSE registers (XMM+MXCSR) for both X86
and X86-64 architectures in the GDB stub:
- configure: Define gdb_xml_files for the X86 targets (32 and 64bit).
- gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files
that contain a description of the XMM + MXCSR registers.
- gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include
the XML file of the core registers and the other XML file of the SSE registers.
- target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper,
  modify the gdb_num_core_regs to fit the registers number defined in each
  XML file.

Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 18:22:02 +02:00
Abdallah Bouassida 00fcd100c3 target/i386: Add GDB XML register description support
This patch implements XML target description support for X86 and X86-64
architectures in the GDB stub, as the way with ARM and PowerPC:
- gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target
  description files, these files are picked from GDB source code.
- configure: Define gdb_xml_files for X86 targets.
- target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add
  XML awareness for this architecture, modify the gdb_num_core_regs to
  fit the registers number defined in each XML file.

Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05 12:09:59 +02:00
Anton Blanchard 1438eff302 target-ppc: gdbstub: Add VSX support
Add the XML and functions to get and set VSX registers.

Signed-off-by: Anton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30 23:37:38 +11:00
David Hildenbrand 8a641ff60f s390x/gdb: expose virtualization specific registers
Let's expose some virtual/fake registers as virtualization specific
registers.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-02 13:31:52 +02:00
David Hildenbrand 5b9f6345a6 s390x/gdb: support reading/writing of control registers
Let's support reading and writing of control registers for kvm and tcg.

We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-07 16:10:43 +02:00
Eric Farman 773d4ebc9a gdb-xml: Include XML for s390 vector registers
Include the vector registers XML file that is provided by gdb,
and can be used by the qemu gdbserver interface.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
David Hildenbrand 6117afac34 s390x/gdb: add the feature xml files for s390x
This patch adds the relevant s390x feature xml files taken from gdb.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-09-01 09:45:19 +02:00
Peter Maydell 6a66942735 target-arm: Support fp registers in gdb stub
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-12-17 19:42:32 +00:00
Alexander Graf 96c04212ba target-arm: Add AArch64 gdbstub support
We want to be able to debug AArch64 guests. So let's add the respective gdb
stub functions and xml descriptions that allow us to do so.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-12-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-6-git-send-email-john.rigby@linaro.org
[PMM: dropped unused fp regs XML for now; moved 64 bit only functions
 to new gdbstub64.c; these are hooked up in AArch64CPU, not via
 ifdefs in ARMCPU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10 19:11:28 +01:00
Nathan Froyd 22555301ad gdb-xml: fix hacks in powerpc register numbering
The powerpc xml files contained a hack--an empty, non-existent
register--for getting the register numbers to line up for
newer (XML-aware) and older (non-XML-aware) GDB.  While this hack worked
in some cases, it didn't work in all cases, notably when the user used
`finish' or `continue': GDB would attempt to read the non-existent
register and QEMU would complain.

This patch fixes things up properly.  Instead of inserting a fake
register, we explicitly declare the floating-point and SPE registers to
start at 71.  This action accomplishes the same thing as the nasty hack,
except that now GDB never tries to fetch the non-existant register 70.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-07-12 23:42:05 +02:00
aurel32 d2c753454e Work around QEMU GDB stub suboptimality
The current XML files claim, on floating point-supporting Power chips,
that $f0 is register 70.  This would be fine, except that register 70
for non-XML-aware GDB is FPSCR.  More importantly, 70 is less than
NUM_CORE_REGS (71) for Power, so a request for register 70 goes to the
"core" register reading routines, rather than the floating-point
register read routine we registered with gdb_register_coprocessor.

Therefore, when we are talking to an XML-aware GDB, we claim that
register has zero width, which causes the rest of QEMU's GDB stub to
send an error back to GDB, which causes GDB to be unable to read the
floating-point registers.  (The problem is also present for SPE
registers and occurs in a slightly different way for Altivec registers.)

The best way to fix this is to have the "core register" XML files for
PPC32 and PPC64 claim that there is a 4-byte register 70, which causes
$f0 to be register 71, and everything works just fine from that point
forward.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6770 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07 22:00:56 +00:00
pbrook e53bd70384 The different VFP variants will never occur at the same time, and giving them
different names confuses GDB, so use org.gnu.gdb.arm.vfp for all of them.

Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6682 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-04 12:18:15 +00:00
aurel32 c8b3532d8a target-ppc: Add XML files for PowerPC registers
These files are nearly identical to the XML files provided with GDB.
The only difference is that power-{fpu,spe}.xml do not assign register
numbers; the internal QEMU machinery takes care of that.

Define gdb_xml_files for ppc targets in configure as well.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6420 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24 15:07:34 +00:00
pbrook 56aebc8916 Add GDB XML register description support.
Signed-off-by: Paul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5459 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-11 17:55:29 +00:00