Commit Graph

628 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé 70cc0c1fb0 hw/display/milkymist-tmu2: Move inlined code from header to source
Move the complexity of milkymist_tmu2_create() into the
source file. Doing so we avoid to include the X11/OpenGL
headers in all LM32 devices, and we also avoid the duplicate
declaration of glx_fbconfig_attr[] (it is already declared
in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-5-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01 11:58:50 +01:00
Philippe Mathieu-Daudé 57d434407a hw/display/milkymist-tmu2: Explicit the dependency to both X11 / OpenGL
The TMU device requires both X11 and OpenGL.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-4-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01 11:58:50 +01:00
Philippe Mathieu-Daudé 3a831fc0df hw/display: Move Milkymist specific hardware out of common-obj list
The Milkymist specific hardware is only used by the LM32 target,
it is pointless to compile those objects in other targets.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-2-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01 11:58:50 +01:00
Daniel P. Berrangé 00f4269743 display: ensure qxl log_buf is a nul terminated string
The QXL_IO_LOG command allows the guest to send log messages to the host
via a buffer in the QXLRam struct. QEMU prints these to the console if
the qxl 'guestdebug' option is set to non-zero. It will also feed them
to the trace subsystem if any backends are built-in.

In both cases the log_buf data will get treated as being as a nul
terminated string, by the printf '%s' format specifier and / or other
code reading the buffer.

QEMU does nothing to guarantee that the log_buf really is nul terminated,
so there is potential for out of bounds array access.

This would affect any QEMU which has the log, syslog or ftrace trace
backends built into QEMU. It can only be triggered if the 'qxl_io_log'
trace event is enabled, however, so they are not vulnerable without
specific administrative action to enable this.

It would also affect QEMU if the 'guestdebug' parameter is set to a
non-zero value, which again is not the default and requires explicit
admin opt-in.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-24 14:16:56 +00:00
Juan Quintela 7ecb381fcf virtio: split virtio gpu bits from virtio-pci.h
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17 21:10:57 -05:00
Paul Durrant 2d0ed5e642 xen: re-name XenDevice to XenLegacyDevice...
...and xen_backend.h to xen-legacy-backend.h

Rather than attempting to convert the existing backend infrastructure to
be QOM compliant (which would be hard to do in an incremental fashion),
subsequent patches will introduce a completely new framework for Xen PV
backends. Hence it is necessary to re-name parts of existing code to avoid
name clashes. The re-named 'legacy' infrastructure will be removed once all
backends have been ported to the new framework.

This patch is purely cosmetic. No functional change.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14 13:45:40 +00:00
Paolo Bonzini 7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Peter Maydell 823dcd58ea ui: bugfixes, drop keymap include support, drop dead code.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcNwaOAAoJEEy22O7T6HE4usIQAKMdl63407uCPDP+k9ySKL2l
 W4O3uRZ0sj+RB7hk8evUJIT/oxGcfD2a4CHQPX6UDn5c5XgZoAuHe/gIzQe4v2QS
 o/Ot7qEbES4QitTSqhkiEuKl6iCp2mY+gchsVRMxfjOFvusU0B/nOl9BZCe57EFc
 jJQyI5sKJb/s6ygDp7yMwA5/qfglIv+wHAbX1GDBAiO6Vuwdk1OOXF/mhI/O1TA3
 T8d71v8cFiC1hWl7vLFecejN5lcXAO/1jVkyuEU9bQfMe1qoZ+BhzJvgzet8XzW+
 j1HrcybNjClvr1Iv0SFkwoRC6w8c2tMOtT10LHtiWF38r/1v8gWcQk36Jeim2Kq3
 RcV9IX56PJWSRTa9Roqvemc3hn3e7WcUkmyQX0PMbNq8obJhjNFuyEFunS1Wo4/G
 ldJ+NSK1n3l90s3ZFRLWiL4DADpYeQy34U3iG4VlC6AYXmKWMjbZCiCyyJCRtawP
 aYLbVQ/+6NsVQol4LaOqlP7uukmOBRiHZIdFTQn9xG3tymJZcEGVM3YSkfuK6InQ
 qTmmRFCUhGi0YPkYupk4BfUyHlSpnecoRGTh4jtetr2CctrhotRCC1L4z45KbzMM
 kWQGaqzCqLGuG7eDSNmwPdrjUKgoqTLWgTikCJhCS+QTFRWR23RigD8PrAq62kGc
 oFNGlDkpqizbdoEAfWOp
 =TcEc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190110-pull-request' into staging

ui: bugfixes, drop keymap include support, drop dead code.

# gpg: Signature made Thu 10 Jan 2019 08:47:10 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190110-pull-request:
  spice: Remove unused include
  keymaps: drop support for include files
  keymaps: remove common include
  keymaps: drop nl-be map
  keymaps: remove modifiers include
  ui/console: Remove qemu_create_display_surface_guestmem()
  configure: bump spice-server required version to 0.12.5
  egl-headless: add egl_create_context

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-10 16:29:02 +00:00
Marc-André Lureau 1b63665c2c configure: bump spice-server required version to 0.12.5
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.

(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")

According to repology, all the distros that are build target platforms
for QEMU include it:

      RHEL-7: 0.14.0
      Debian (Stretch): 0.12.8
      Debian (Jessie): 0.12.5
      FreeBSD (ports): 0.14.0
      OpenSUSE Leap 15: 0.14.0
      Ubuntu (Xenial): 0.12.6

Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-10 08:55:13 +01:00
Thomas Huth 0cd0589ecf trivial: Don't include isa.h if it is not really necessary
These files don't seem to do anything related to ISA directly, so
there is no need to include isa.h here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-09 11:24:35 +01:00
Eduardo Habkost a4ee4c8baa virtio: Helper for registering virtio device types
Introduce a helper for registering different flavours of virtio
devices.  Convert code to use the helper, but keep only the
existing generic types.  Transitional and non-transitional device
types will be added by another patch.

Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Mao Zhongyi 0323ee4321 display/g364fb: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
g364fb_sysbus_class_init().

Cc: pbonzini@redhat.com
Cc: kraxel@redhat.com
Cc: f4bug@amsat.org
Cc: alistair.francis@wdc.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-6-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:57 +00:00
Marc-André Lureau 03fee66fde vmstate: constify VMStateField
Because they are supposed to remain const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27 15:35:15 +01:00
Wang Xin b7ee9e4970 cirrus_vga/migration: update the bank offset before use
The cirrus bank0/1 offset should be updated before we update the vram's alias
offset.

Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Message-id: 20181123064646.23036-1-linzhecheng@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-27 07:47:57 +01:00
Marc-André Lureau 627c865d22 edid: silence a stringop-overflow warning
Simplify the code that doesn't need strncpy() since length of string
is already computed.

/home/elmarco/src/qemu/hw/display/edid-generate.c: In function 'edid_desc_text':
/home/elmarco/src/qemu/hw/display/edid-generate.c:168:5: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
     strncpy((char *)(desc + 5), text, len);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/hw/display/edid-generate.c:164:11: note: length computed here
     len = strlen(text);
           ^~~~~~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181110111623.31356-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-12 14:14:18 +01:00
Peter Maydell ef3a6af5e7 vga: two fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJb1wEcAAoJEEy22O7T6HE4D9MP/3xvz/3YHPRWug+px7PKeQTO
 K6GfT5zKCYl5xGg+CZPpQDp47UtEkiDb9zduWTP4cMUreVVa46b9iUoPdFuzqCsB
 RRbSAe8tDzW0tgf512XJK7F/BoxPTKvASxDFfH0oknJzXXujoST3oSUGQdkWLT1H
 FJ7Cjx2ko/LUYHGO2u7G+I8h5zvWjaeXy3WEMBQviL7Vyv1r6DYQBhnuDiT6kfuK
 LxbMqfUCvbcNHo3M9U0jlkEaRGSwzsyW3NXXh5IJ4kRnRKq33KjHkCgeIOuA92pj
 CErpT3oacKgAJ5QtYWjZAUS69YX2CBe/PDcMhO2WyhNi7B5avycuCbffJfxt1wtN
 lWmqMCw7ZqB5iQeW2Hs/PVoy7Z7ExN8PRT4qDwiRloayP8ZnJTASDPzat6yofqR3
 7bRMG7DAiBEbMQa6LaFnVNNhUEOAWWfPyofJ03qsOikJ/mGwWN9zq/A03H6XKRFE
 jm1OdS4n9TjmMCMqBc3YtoPy1wTX9bLxJdtGY+cYxaTB0kk/N25cPWMxFQ6NI0nX
 Xc1/DNIvLg8aamIcirlBU6inCwGXa9OdfeFEorSa98u4XD32A7M9vyLHUdVUmna7
 YtrFbTZ6GkrqqPVtQ1KcAJ7q09hyxh4Y1s2u5ZmyQT7RCDeAjQIm19UTthiqTzC1
 nGfup524BpB8+C4W1Hmm
 =BbNm
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20181029-pull-request' into staging

vga: two fixes.

# gpg: Signature made Mon 29 Oct 2018 12:46:20 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20181029-pull-request:
  vga_int: remove unused function protype
  qxl: store channel id in qxl->id

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-29 12:59:15 +00:00
yuchenlin e69a10f468 vga_int: remove unused function protype
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181022080053.9379-1-yuchenlin@synology.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-29 10:43:48 +01:00
Gerd Hoffmann 60e94e4397 qxl: store channel id in qxl->id
See qemu_spice_add_display_interface(), the console index is also used
as channel id.  So put that into the qxl->id field too.

In typical use cases (one primary qxl-vga device, optionally one or more
secondary qxl devices, no non-qxl display devices) this doesn't change
anything.

With this in place the qxl->id can not be used any more to figure
whenever a given device is primary (with vga compat mode) or secondary.
So add a bool to track this.

Cc: spice-devel@lists.freedesktop.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181012114540.27829-1-kraxel@redhat.com
2018-10-29 10:43:19 +01:00
Markus Armbruster 0765691e97 cpus hw target: Use warn_report() & friends to report warnings
Calling error_report() in a function that takes an Error ** argument
is suspicious.  Convert a few that are actually warnings to
warn_report().

While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.

Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Thomas Huth ce3cf70eda hw/display/cirrus_vga: Move "isa-cirrus-vga" device into a separate file
In downstream distros like RHEL we'd like to disable some of the "legacy"
devices of QEMU. The ISA version of the Cirrus VGA device is one of these
legacy devices. So let's make the build process a little bit more flexible
here by putting the Cirrus ISA code into a separate file which is only
included if both, CONFIG_VGA_CIRRUS and CONFIG_VGA_ISA are set.

Note that this disables "isa-cirrus-vga" for the ppc-softmmu and the
alpha-softmmu target since CONFIG_VGA_ISA is not set there. But I think
this is OK since these targets are only interested in the PCI variant
anyway.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1539339106-32427-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-15 09:57:33 +02:00
Gerd Hoffmann 2f99f80c5d qxl: check qxl_phys2virt return value
Fixes: CID 1395986
Fixes: 979f7ef896
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181005134608.1251-1-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Gerd Hoffmann a0d098b794 bochs-display: wire up edid support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005160147.892-3-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Gerd Hoffmann cc22c1bf5d display: add separate config option for bochs-display
This allows modern architectures which don't care about vga
compatibility (risc-v for example) build bochs-display without
including all vga emulation too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181005160147.892-2-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Gerd Hoffmann 2e4a0b1766 edid: fix alignment issues
Use stl_le_p() & friends instead of casts.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181015055333.32030-1-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Peter Maydell 74e2e59b8d hw/display/bcm2835_fb: Silence Coverity warning about multiply overflow
Coverity complains (CID 1395628) that the multiply in the calculation
of the framebuffer base is performed as 32x32 but then used in a
context that takes a 64-bit hwaddr. This can't actually ever
overflow the 32-bit result, because of the constraints placed on
the s->config values in bcm2835_fb_validate_config(). But we
can placate Coverity anyway, by explicitly casting one of the
inputs to a hwaddr, so the whole expression is calculated with
64-bit arithmetic.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20181005133012.26490-1-peter.maydell@linaro.org
2018-10-08 14:55:05 +01:00
Gerd Hoffmann edbc4b24bb edid: fix vendor default
"EMU" actually is "Emulex Corporation", so not a good idea to use that
by default.  Lets use the Red Hat vendor id instead, which is in line
with the pci ids which are allocated from Red Hat vendor ids too.

Vendor list is available from http://www.uefi.org/pnp_id_list

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005091934.12143-1-kraxel@redhat.com
2018-10-05 11:26:56 +02:00
remy.noel 0ab90e6170 secondary-vga: delete mmio subregions upon exit
93abfc88bd introduced a reference cycle in
the vga-pci devices, preventing cleanup of the object upon hotblug.

This patch allows to break the cycle.

Signed-off-by: remy.noel <remy.noel@blade-group.com>
Message-id: 20181002121935.23706-1-remy.noel@blade-group.com

[ kraxel: delete the recently added edid region too ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-05 11:23:37 +02:00
Peter Maydell 5a358b39f5 hw/display/qxl: Suppress clang-7 warning about misaligned atomic operation
If QEMU is compiled with clang-7 it results in the warning:

hw/display/qxl.c:1884:19: error: misaligned or large atomic operation
may incur significant performance penalty [-Werror,-Watomic-alignment]
    old_pending = atomic_fetch_or(&d->ram->int_pending, le_events);
                  ^

This is because the Spice headers forgot to define the QXLRam struct
with the '__aligned__(4)' attribute.  clang 7 and newer will thus
warn that the access here to int_pending might not be 4-aligned
(because the QXLRam object d->ram points at might start at a
misaligned address).  In fact we set up d->ram in init_qxl_ram() so
it always starts at a 4K boundary, so we know the atomic access here
is OK.

Newer Spice versions (with Spice commit
beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug;
for older Spice versions, work around it by telling the compiler
explicitly that the alignment is OK using __builtin_assume_aligned().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180927155538.699-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-05 11:21:17 +02:00
Peter Wu 36ffc122dc qxl: support mono cursors with inverted colors
Monochrome cursors are still used by Windows guests with the
QXL-WDDM-DOD driver. Such cursor types have one odd feature, inversion
of colors. GDK does not seem to support it, so implement an alternative
solution: fill the inverted pixels and add an outline to make the cursor
more visible. Tested with the text cursor in Notepad and Windows 10.

cursor_set_mono is also used by the vmware GPU, so add a special check
to avoid breaking its 32bpp format (tested with Kubuntu 14.04.4). I was
unable to find a guest which supports the 1bpp format with a vmware GPU.

The old implementation was buggy and removed in v2.10.0-108-g79c5a10cdd
("qxl: drop mono cursor support"), this version improves upon that by
adding bounds validation, clarifying the semantics of the two masks and
adds a workaround for inverted colors support.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1611984
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180903145447.17142-1-peter@lekensteyn.nl

[ kraxel: minor codestyle fix ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-27 08:10:07 +02:00
Gerd Hoffmann 979f7ef896 qxl: use guest_monitor_config for local renderer.
When processing monitor config from guest store head0 width and height
for single-head configurations.  Use these when creating the
DisplaySurface in the local renderer.

This fixes a rendering issue with wayland.  Wayland rounds up the
framebuffer width and height to a multiple of 64, so with odd
resolutions (800x600 for example) the framebuffer is larger than the
actual screen.  The monitor config has the actual screen size though.

This fixes guest display for anything using the local renderer
(non-spice UI, screendump monitor command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180919103057.9666-1-kraxel@redhat.com
2018-09-27 08:08:07 +02:00
Gerd Hoffmann d46b40fce2 display/stdvga: add edid support.
This patch adds edid support to the qemu stdvga.  It is turned off by
default and can be enabled with the new edid property.  The patch also
adds xres and yres properties to specify the video mode you want the
guest use.  Works only with edid enabled and updated guest driver.

The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that.  So let's use that region to place the
EDID data block there.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Gerd Hoffmann 97917e9e02 display/edid: add region helper.
Create a io region for an EDID data block.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180925075646.25114-4-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Gerd Hoffmann e7992fc5a0 display/edid: add qemu_edid_size()
Helper function to figure the size of a edid blob, by checking how many
extensions are present.  Both the base edid blob and the extensions are
128 bytes in size.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-3-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Gerd Hoffmann 72d277a70e display/edid: add edid generator to qemu.
EDID is a metadata format to describe monitors.  On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.

On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid.  xorg ships a edid-decode utility
which you can use to turn the blob into readable form.

I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers.  This patch is the
first step, it adds an generator for EDID blobs to qemu.  Comes with a
qemu-edid test tool included.

With EDID we can pass more information to the guest.  Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor".  List of video modes.  Display resolution, pretty important
in case we want add HiDPI support some day.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Marcus Comstedt f3a60058c9 sm501: Adjust endianness of pixel value in rectangle fill
The value from twoD_foreground (which is in host endian format) must
be converted to the endianness of the framebuffer (currently always
little endian) before it can be used to perform the fill operation.

Signed-off-by: Marcus Comstedt <marcus@mc.pp.se>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Gerd Hoffmann 8da132a56f virtio-gpu: add iommu support
Switch from cpu_physical_memory_map to dma_memory_map,
so iommu mappings for virtio-gpu objects work properly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180829122101.29852-3-kraxel@redhat.com>
2018-09-03 08:31:57 +02:00
Gerd Hoffmann 3bb68f798d virtio-gpu: pass down VirtIOGPU pointer to a bunch of functions
No functional change, just preparation for a followup patch
which needs a VirtIOGPU pointer.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180829122101.29852-2-kraxel@redhat.com>
2018-09-03 08:31:50 +02:00
Gerd Hoffmann 91155f8bf7 use dpy_gfx_update_full
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180810132856.22833-1-kraxel@redhat.com
2018-08-30 13:24:13 +02:00
Gerd Hoffmann 161f4c4717 Revert "virtio-gpu: fix crashes upon warm reboot with vga mode"
This reverts commit 93f874fe9d.

Now with virtio-vga being resetted properly the
crash workaround is not needed any more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-3-kraxel@redhat.com
2018-08-30 12:52:57 +02:00
Gerd Hoffmann 43e4dbe206 virtio-vga: fix reset
We must call the reset functions for both virtio-gpu
and vga to properly reset the combo device.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-2-kraxel@redhat.com
2018-08-30 12:52:57 +02:00
Peter Maydell cfb7ba9838 hw/display/bcm2835_fb: Validate bcm2835_fb_mbox_push() config
Refactor bcm2835_fb_mbox_push() to work by calling
bcm2835_fb_validate_config() and bcm2835_fb_reconfigure(),
so that config set this way is also validated.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-9-peter.maydell@linaro.org
2018-08-24 13:17:50 +01:00
Peter Maydell f8add62c0c hw/display/bcm2835_fb: Validate config settings
Validate the config settings that the guest tries to set.

The wiki page documentation is not really accurate here:
generally rather than failing requests to set bad parameters,
the hardware will just clip them to something sensible.

Validate the most important parameters: sizes and
the viewport offsets. This prevents the framebuffer
code from trying to read out-of-range memory.

In the property handling code, we validate the new parameters every
time we encounter a tag that sets them. This means we validate the
config multiple times if the request includes multiple config-setting
tags, but the code would require significant restructuring to do a
validation only once but still return the clipped settings for
get-parameter tags and the buffer allocation tag.

Validation of settings made via the older bcm2835_fb_mbox_push()
function will be done in the next commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-8-peter.maydell@linaro.org
2018-08-24 13:17:50 +01:00
Peter Maydell 01f18af98b hw/display/bcm2835_fb: Fix handling of virtual framebuffer
The raspi framebuffir in bcm2835_fb supports the definition
of a virtual "viewport", which is smaller than the full
physical framebuffer size and at an adjustable offset within
it. Only the viewport area is sent to the screen. This allows
the guest to do things like double buffering, or scrolling
by adjusting the viewport origin. Currently QEMU doesn't
implement this at all.

Add support for this feature:
 * the property mailbox code needs to distinguish the
   virtual width/height from the physical width/height
 * the framebuffer code needs to do something with the
   virtual width/height/origin information

Note that the wiki documentation on the semantics of the
virtual and physical height and width has it the wrong way
around -- the virtual size is the size of the allocated
buffer, and the physical size is the size of the display,
so the virtual size is always the same as or larger than
the physical.

If the viewport size is set smaller than the physical
screen size, we ignore the viewport settings completely
and just display the physical screen area.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-7-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell 9a1f03f4ee hw/display/bcm2835_fb: Abstract out calculation of pitch, size
Abstract out the calculation of the pitch and size of the
framebuffer into functions that operate on the BCM2835FBConfig
struct -- these are about to get a little more complicated
when we add support for virtual and physical sizes differing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-6-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell 9e2938a0fd hw/display/bcm2835_fb: Reset resolution, etc correctly
The bcm2835_fb's initial resolution and other parameters are set
via QOM properties. We should reset to those initial values on
device reset, which means we need to save the QOM property
values somewhere that they are not overwritten by guest
changes to the framebuffer configuration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-5-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell ea662f7cc8 hw/display/bcm2835_fb: Drop unused size and pitch fields
The BCM2835FBState struct has a 'pitch' field which is a
cached copy of xres * (bpp >> 3), and a 'size' field which is
a cached copy of pitch * yres. However we don't actually do
anything with these fields; delete them. We retain the
now-unused slots in the VMState struct for migration
compatibility.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-4-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell 193100b571 hw/misc/bcm2835_property: Track fb settings using BCM2835FBConfig
Refactor the fb property setting code so that rather than
using a set of pointers to local variables to track
whether a config value has been updated in the current
mbox and if so what its new value is, we just copy
all the current settings of the fb at the start, and
then update that copy as we go along, before asking
the fb to switch to it at the end.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-3-peter.maydell@linaro.org
2018-08-24 13:17:48 +01:00
Peter Maydell a02755ece0 hw/misc/bcm2835_fb: Move config fields to their own struct
The handling of framebuffer properties in the bcm2835_property code
is a bit clumsy, because for each of the many fb related properties
we try to track the value we're about to set and whether we're going
to be setting a value, and then we hand all the new values off
to the framebuffer via a function which takes them all as separate
arguments. It would be simpler if the property code could easily
copy all the framebuffer's current settings, update them with
the new specified values and then ask the framebuffer to switch
to the new set.

As the first part of this refactoring, pull all the fb config
settings fields in BCM2835FBState out into their own struct.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-2-peter.maydell@linaro.org
2018-08-24 13:17:48 +01:00
Peter Maydell 3c825bb7c1 * x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
 * pm_smbus improvements (Corey)
 * Move validation to pre_plug for pc-dimm (David)
 * Fix memory leaks (Eduardo, Marc-André)
 * synchronization profiler (Emilio)
 * Convert the CPU list to RCU (Emilio)
 * LSI support for PPR Extended Message (George)
 * vhost-scsi support for protection information (Greg)
 * Mark mptsas as a storage device in the help (Guenter)
 * checkpatch tweak cherry-picked from Linux (me)
 * Typos, cleanups and dead-code removal (Julia, Marc-André)
 * qemu-pr-helper support for old libmultipath (Murilo)
 * Annotate fallthroughs (me)
 * MemoryRegionOps cleanup (me, Peter)
 * Make s390 qtests independent from libqos, which doesn't actually support it (me)
 * Make cpu_get_ticks independent from BQL (me)
 * Introspection fixes (Thomas)
 * Support QEMU_MODULE_DIR environment variable (ryang)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
 Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
 WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
 LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
 sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
 zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
 =UZiV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)

# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (69 commits)
  KVM: cleanup unnecessary #ifdef KVM_CAP_...
  target/i386: update MPX flags when CPL changes
  i2c: pm_smbus: Add the ability to force block transfer enable
  i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
  i2c: pm_smbus: Add interrupt handling
  i2c: pm_smbus: Add block transfer capability
  i2c: pm_smbus: Make the I2C block read command read-only
  i2c: pm_smbus: Fix the semantics of block I2C transfers
  i2c: pm_smbus: Clean up some style issues
  pc-dimm: assign and verify the "addr" property during pre_plug
  pc: drop memory region alignment check for 0
  util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
  pc-dimm: assign and verify the "slot" property during pre_plug
  ipmi: Use proper struct reference for BT vmstate
  vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
  vhost-scsi: unify vhost-scsi get_features implementations
  vhost-user-scsi: move host_features into VHostSCSICommon
  cpus: allow cpu_get_ticks out of BQL
  cpus: protect TimerState writes with a spinlock
  seqlock: add QemuLockable support
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-23 19:03:54 +01:00
Paolo Bonzini edd7541b8c fix "Missing break in switch" coverity reports
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment.  This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00