There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The previous test depended on the assumption that P9_DOTL_AT_REMOVEDIR
and AT_REMOVEDIR have the same value.
While this is true on Linux, it is not true everywhere, and leads to an
incorrect test failure on unlink_at, noticed when adding 9p to darwin:
Received response 7 (RLERROR) instead of 77 (RUNLINKAT)
Rlerror has errno 22 (Invalid argument)
**
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77) Bail out!
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77)
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Add explanation of patch and description
of pre-patch test failure]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Will Cohen: - Move this patch before 9p: darwin: meson
patch to avoid qtest breakage during
bisecting]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-11-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Adds clobbers and merges remaining separate asm statements.
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220301214305.2778-1-dmiller423@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: dropped changes to mie3-compl.c, whitespace fixes]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Note that reads zero areas (not dirty in the bitmap) fails, that's
correct.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add helper that returns both status and output, to be used in the
following commit
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Current scheme of image fleecing looks like this:
[guest] [NBD export]
| |
|root | root
v v
[copy-before-write] -----> [temp.qcow2]
| target |
|file |backing
v |
[active disk] <-------------+
- On guest writes copy-before-write filter copies old data from active
disk to temp.qcow2. So fleecing client (NBD export) when reads
changed regions from temp.qcow2 image and unchanged from active disk
through backing link.
This patch makes possible new image fleecing scheme:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
- copy-before-write does CBW operations and also provides
snapshot-access API. The API may be accessed through
snapshot-access driver.
Benefits of new scheme:
1. Access control: if remote client try to read data that not covered
by original dirty bitmap used on copy-before-write open, client gets
-EACCES.
2. Discard support: if remote client do DISCARD, this additionally to
discarding data in temp.img informs block-copy process to not copy
these clusters. Next read from discarded area will return -EACCES.
This is significant thing: when fleecing user reads data that was
not yet copied to temp.img, we can avoid copying it on further guest
write.
3. Synchronisation between client reads and block-copy write is more
efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
used for writes to temp.qcow2. New scheme is less blocking:
- fleecing reads are never blocked: if data region is untouched or
in-flight, we just read from active-disk, otherwise we read from
temp.img
- writes to temp.img are not blocked by fleecing reads
- still, guest writes of-course are blocked by in-flight fleecing
reads, that currently read from active-disk - it's the minimum
necessary blocking
4. Temporary image may be of any format, as we don't rely on backing
feature.
5. Permission relation are simplified. With old scheme we have to share
write permission on target child of copy-before-write, otherwise
backing link conflicts with copy-before-write file child write
permissions. With new scheme we don't have backing link, and
copy-before-write node may have unshared access to temporary node.
(Not realized in this commit, will be in future).
6. Having control on fleecing reads we'll be able to implement
alternative behavior on failed copy-before-write operations.
Currently we just break guest request (that's a historical behavior
of backup). But in some scenarios it's a bad behavior: better
is to drop the backup as failed but don't break guest request.
With new scheme we can simply unset some bits in a bitmap on CBW
failure and further fleecing reads will -EACCES, or something like
this. (Not implemented in this commit, will be in future)
Additional application for this is implementing timeout for CBW
operations.
Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.
With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).
Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point. (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.) Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.
(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
suggested by Vladimir; and rebased on 9086c76398
("tests/qemu-iotests: Rework the checks and spots using GNU
sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In TAP mode, the stdout is reserved for the TAP protocol, so we
have to make sure to mark other lines with a comment '#' character
at the beginning to avoid that the TAP parser at the other end
gets confused.
To test this condition, run "configure" for example with:
--block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read
so that iotest 041 will report that some tests are not run due to
the missing "quorum" driver. Without this change, "make check-block"
fails since the meson tap parser gets confused by these messages.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223124353.3273898-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
iotest 040 already has some checks for the availability of the 'throttle'
driver, but some new code has been added in the course of time that
depends on 'throttle' but does not check for its availability. Add
a check to the TestCommitWithFilters class so that this iotest now
also passes again if 'throttle' has not been enabled in the QEMU
binaries.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223123127.3206042-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The exrl-trt* tests use two pre-initialized variables for the
results of the assembly code:
uint64_t r1 = 0xffffffffffffffffull;
uint64_t r2 = 0xffffffffffffffffull;
But then the assembly code copies over the full contents
of the register into the output variable, without taking
care of this pre-initialized values:
" lgr %[r1],%%r1\n"
" lgr %[r2],%%r2\n"
The code then finally compares the register contents to
a value that apparently depends on the pre-initialized values:
if (r2 != 0xffffffffffffffaaull) {
write(1, "bad r2\n", 7);
return 1;
}
This all works with GCC, since the 0xffffffffffffffff got into
the r2 register there by accident, but it fails completely with
Clang.
Let's fix this by declaring the r1 and r2 variables as proper
register variables instead, so the pre-initialized values get
correctly passed into the inline assembly code.
Message-Id: <20220301092431.1448419-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These instructions use addressing with a "base address", meaning
that if register r0 is used, it is always treated as zero, no matter
what value is stored in the register. So we have to make sure not
to use register r0 for these instructions in our tests. There was
no problem with GCC so far since it seems to always pick other
registers by default, but Clang likes to chose register r0, too,
so we have to use the "a" constraint to make sure that it does
not pick r0 here.
Message-Id: <20220301093911.1450719-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The FACP table is going to be changed for x86/q35 machines. To be sure
the following changes are not breaking any QEMU test this change follows
step 2 from the bios-tables-test.c guide on changes that affect ACPI
tables.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-17-f4bug@amsat.org>
The bypass config field should be initialized to 1 by default.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-5-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
* Clang fixes
* Vector/VSX instruction batch fixes
-----BEGIN PGP SIGNATURE-----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=C+wh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220305' into staging
ppc-7.0 queue :
* Clang fixes
* Vector/VSX instruction batch fixes
# gpg: Signature made Sat 05 Mar 2022 08:18:06 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-20220305:
target/ppc: Add missing helper_reset_fpstatus to helper_XVCVSPBF16
target/ppc: Add missing helper_reset_fpstatus to VSX_MAX_MINC
target/ppc: split XXGENPCV macros for readability
target/ppc: use andc in vrlqmi
target/ppc: use extract/extract2 to create vrlqnm mask
target/ppc: use ext32u and deposit in do_vx_vmulhw_i64
target/ppc: Fix vmul[eo]* instructions marked 2.07
tests/tcg/ppc64le: Use Altivec register names in clobber list
tests/tcg/ppc64le: emit bcdsub with .long when needed
tests/tcg/ppc64le: drop __int128 usage in bcdsub
target/ppc: change xs[n]madd[am]sp to use float64r32_muladd
tests/tcg/ppc64le: use inline asm instead of __builtin_mtfsf
Use long endian options for ppc64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
LLVM/Clang doesn't know the VSX registers when compiling with
-mabi=elfv1. Use only registers >= 32 and list them with their Altivec
name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Based on GCC docs[1], we use the '-mpower8-vector' flag at config-time
to detect the toolchain support to the bcdsub instruction. LLVM/Clang
supports this flag since version 3.6[2], but the instruction and related
builtins were only added in LLVM 14[3]. In the absence of other means to
detect this support at config-time, we resort to __has_builtin to
identify the presence of __builtin_bcdsub at compile-time. If the
builtin is not available, the instruction is emitted with a ".long".
[1] https://gcc.gnu.org/onlinedocs/gcc-8.3.0/gcc/PowerPC-AltiVec_002fVSX-Built-in-Functions.html
[2] 59eb767e11
[3] c933c2eb33
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Using __int128 with inline asm constraints like "v" generates incorrect
code when compiling with LLVM/Clang (e.g., only one doubleword of the
VSR is loaded). Instead, use a GPR pair to pass the 128-bits value and
load the VSR with mtvsrd/xxmrghd.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
LLVM/Clang does not support __builtin_mtfsf.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are
equivalent on ppc64 architecture. However, Clang supports only long
version of the options.
Use longer form in configure to properly support both GCC and Clang
compiler. In addition, fix this issue in tcg test configure.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220131091714.4825-1-mrezanin@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Instead of failing the iotests if GNU sed is not available (or skipping
them completely in the check-block.sh script), it would be better to
simply skip the bash-based tests that rely on GNU sed, so that the other
tests could still be run. Thus we now explicitely use "gsed" (either as
direct program or as a wrapper around "sed" if it's the GNU version)
in the spots that rely on the GNU sed behavior. Statements that use the
"-r" parameter of sed have been switched to use "-E" instead, since this
switch is supported by all sed versions on our supported build hosts
(most also support "-r", but macOS' sed only supports "-E"). With all
these changes in place, we then can also remove the sed checks from the
check-block.sh script, so that "make check-block" can now be run on
systems without GNU sed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220216125454.465041-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the following scenario:
1. Some block node (null-co) attached to a user (here: NBD server) that
performs I/O and keeps the node in an I/O thread
2. Repeatedly run blockdev-add/blockdev-del to add/remove an overlay
to/from that node
Each blockdev-add triggers bdrv_refresh_limits(), and because
blockdev-add runs in the main thread, it does not stop the I/O requests.
I/O can thus happen while the limits are refreshed, and when such a
request sees a temporarily invalid block limit (e.g. alignment is 0),
this may easily crash qemu (or the storage daemon in this case).
The block layer needs to ensure that I/O requests to a node are paused
while that node's BlockLimits are refreshed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220216105355.30729-4-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a parameter to optionally open a QMP connection when creating a
QemuStorageDaemon instance.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220216105355.30729-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
185 tests quitting qemu while a block job is active. It does not
specifically test quitting qemu while a mirror or active commit job is
in its READY phase.
Add two test cases for this, where we respectively mirror or commit to
an external QSD instance, which provides a throttled block device. qemu
is supposed to cancel the job so that it can quit as soon as possible
instead of waiting for the job to complete (which it did before 6.2).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303164814.284974-5-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RCU may be used from coroutines. Standard __thread variables cannot be
used by coroutines. Use the coroutine TLS macros instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220222140150.27240-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is currently just a wrapper for bdrv_invalidate_cache(),
but in future will contain the code of bdrv_co_invalidate_cache() that
has to always be protected by BQL, and leave the rest in the I/O
coroutine.
Replace all bdrv_invalidate_cache() invokations with bdrv_activate().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
- restore TESTS/IMAGES filtering to docker tests
- add NOUSER to alpine image
- bump lcitool version
- move arm64/s390x cross build images to lcitool
- add aarch32 runner CI scripts
- expand testing to more vectors
- update s390x jobs to focal for gitlab/travis
- disable threadcount for all sh4
- fix semihosting SYS_HEAPINFO and test
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmIdGJEACgkQ+9DbCVqe
KkQZYQf+Ndlm651dulO4J55puk8cUOMrCrDvqVkxM/V7ZD4GKyoa9/PstfOspLkQ
hXNANtfcr7zsXxo7J7PKVpX3y+upxCMLLK9NqHXW3O8mOSoru44caLko6FdmwWkU
KmoToEM3jgxJxqrE8ijLz1gxo79TVT0m3OyyKlMf9C+Wf4BfUe4NXjt/VMcecrDd
wKJnvjWyrk67yOyPRDnT2XlG1HdphD90g8xPxiK1tzkEQEWJlojTLSZENQksa1V6
JBu1mwT/KPodkllzTQcHHjGn4/vsdzFqjqV+8d3xXiSmr/QdeyByUeDhJ7aI4qdY
aKoX3hoIUdENmPxqXozuVBy/S4gLoA==
=MY0T
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-280222-1' into staging
Testing and semihosting updates:
- restore TESTS/IMAGES filtering to docker tests
- add NOUSER to alpine image
- bump lcitool version
- move arm64/s390x cross build images to lcitool
- add aarch32 runner CI scripts
- expand testing to more vectors
- update s390x jobs to focal for gitlab/travis
- disable threadcount for all sh4
- fix semihosting SYS_HEAPINFO and test
# gpg: Signature made Mon 28 Feb 2022 18:46:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-semihosting-280222-1:
tests/tcg: port SYS_HEAPINFO to a system test
semihosting/arm-compat: replace heuristic for softmmu SYS_HEAPINFO
tests/tcg: completely disable threadcount for sh4
gitlab: upgrade the job definition for s390x to 20.04
travis.yml: Update the s390x jobs to Ubuntu Focal
tests/tcg: add vectorised sha512 versions
tests/tcg: add sha512 test
tests/tcg: build sha1-vector with O3 and compare
tests/tcg/ppc64: clean-up handling of byte-reverse
gitlab: add a new aarch32 custom runner definition
scripts/ci: allow for a secondary runner
scripts/ci: add build env rules for aarch32 on aarch64
tests/docker: introduce debian-riscv64-test-cross
tests/docker: update debian-s390x-cross with lcitool
tests/docker: update debian-arm64-cross with lcitool
tests/lcitool: update to latest version
tests/docker: add NOUSER for alpine image
tests/docker: restore TESTS/IMAGES filtering
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to check our new SYS_HEAPINFO implementation generates
sane values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220225172021.3493923-19-alex.bennee@linaro.org>
The previous disabling of threadcount 3bdc19af00 ("tests/tcg/sh4:
disable another unreliable test") just for plugins was being too
conservative. It's all broken so skip it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-17-alex.bennee@linaro.org>
This imports the sha512 algorithm and related tests from ccan which
offers a cleaner hash implementation with its own validation tests
with which we can exercise TCG code generations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-13-alex.bennee@linaro.org>
The aim of this is to test code generation for vectorised operations.
Unfortunately gcc struggles to do much with the messy sha1 code (try
-fopt-info-vec-missed to see why). However it's better than nothing.
We assume the non-vectorised output is gold and baring compiler bugs
the outputs should match.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-12-alex.bennee@linaro.org>
Rather than having an else leg for the missing compiler case we can
simply just not add the test - the same way as is done for ppc64le.
Also while we are at it fix up the compiler invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-11-alex.bennee@linaro.org>
Cross building QEMU for riscv64 still involves messing about with sid
and ports. However for building tests we can have a slimmer compiler
only container which should be more stable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-7-alex.bennee@linaro.org>
A later compiler is needed for some upcomming tests so we might as
well migrate to an lcitool generated docker file.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-6-alex.bennee@linaro.org>
Using lcitool update debian-arm64-cross to a Debian 11 based system.
As a result we can drop debian-arm64-test-cross just for building
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-5-alex.bennee@linaro.org>
We will need an update shortly for some new images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-4-alex.bennee@linaro.org>
The alpine image doesn't have a standard useradd binary so disable
this convenience feature for it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-3-alex.bennee@linaro.org>
This was broken in the re-factor:
e86c9a64f4 ("tests/docker/Makefile.include: add a generic docker-run target")
Rather than unwind the changes just apply the filters to the total set
of available images and tests. That way we don't inadvertently build
images only not to use them later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-2-alex.bennee@linaro.org>
QEMU's default screen resolution recently changed to 1280x800, so the
resolution in the screen shot header changed of course, too.
Fixes: de72c4b7cd ("edid: set default resolution to 1280x800 (WXGA)")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220221101933.307525-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
-----BEGIN PGP SIGNATURE-----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=PeCY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging
This misc series of changes:
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
# gpg: Signature made Thu 17 Feb 2022 11:57:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-next-pull-request:
docs: expand firmware descriptor to allow flash without NVRAM
MAINTAINERS: take over seccomp from Eduardo Otubo
seccomp: block setns, unshare and execveat syscalls
seccomp: block use of clone3 syscall
seccomp: fix blocking of process spawning
seccomp: add unit test for seccomp filtering
seccomp: allow action to be customized per syscall
block: print the server key type and fingerprint on failure
block: support sha256 fingerprint with pre-blockdev options
block: better document SSH host key fingerprint checking
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test abort during active migration when failover is disabled from QEMU
or from guest side.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-8-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The primary device is not plugged and the migration is done only with
the standby device
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-7-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If failover is off, the primary device is not plugged and
the migration is done only with the standby device.
On destination, the primary device must not be plugged.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-6-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU provides the VIRTIO_NET_F_STANDBY feature but the guest doesn't
the primary device must be kept hidden
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-5-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check QEMU provides the VIRTIO_NET_F_STANDBY if failover is on,
and doesn't if failover is off
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This allows g_assert() to correctly report the line number of the error
in the test case.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The retry_isa test is not doing what it was intended for: The
test_retry_flush() function ignores the machine parameter completely
and thus this test does not get run with the "isapc" machine.
Moreover, in the course of time, the test_retry_flush() has been
changed to depend on PCI-related functions, so this also cannot
be fixed by simply using the machine parameter now. The correct
fix would be to switch the whole test to libqos, but until someone
has time to do this, let's simply drop the retry_isa test for now.
Message-Id: <20220121120635.220644-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-netdev vhost-user,vhostforce is deprecated and vhostforce=on
should be used instead.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220210145254.157790-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The way to print uint64_t is with PRIx64, not with
a cast to long long.
Message-Id: <20220206093547.1282513-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hotplug tests need a bridge setting up on q35, for now
keep them on 'pc'.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220215162537.605030-3-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For tests that rely on old hardware, e.g. floppies or IDE drives,
explicitly select the 'pc' machine type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220215162537.605030-2-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is recommended to use g_autofree or g_autoptr as it reduces
the odds of introducing memory leaks in future changes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-3-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
local_test_path is allocated in virtio_9p_create_local_test_dir() to hold the path
of the temporary directory. It should be freed in virtio_9p_remove_local_test_dir()
when the temporary directory is removed. Clarify the lifecycle of local_test_path
while here.
Based-on: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-2-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The 9p test cases use mkdtemp() to create a temporary directory for
running the 'local' 9p tests with real files/dirs. Unlike mktemp()
which only generates a unique file name, mkdtemp() also creates the
directory, therefore the subsequent mkdir() was wrong and caused
errors on some systems.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fixes: 136b7af2 (tests/9pfs: fix test dir for parallel tests)
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/832
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <Greg Kurz <groug@kaod.org>
Message-Id: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mn1fA-0005qZ-TM@lizzy.crudebyte.com>
When '-sandbox on,spawn=deny' is given, we are supposed to block the
ability to spawn processes. We naively blocked the 'fork' syscall,
forgetting that any modern libc will use the 'clone' syscall instead.
We can't simply block the 'clone' syscall though, as that will break
thread creation. We thus list the set of flags used to create threads
and block anything that doesn't match this exactly.
Acked-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The handling of some syscalls / libc function is quite subtle. For
example, 'fork' at a libc level doesn't always correspond to 'fork'
at a syscall level, since the 'clone' syscall is preferred usually.
The unit test will help to detect these kind of problems. A point of
difficulty in writing a test though is that the QEMU build process may
already be confined by seccomp. For example, if running inside a
container. Since we can't predict what filtering might have been applied
already, we are quite conservative and skip all tests if we see any kind
of seccomp filter active.
Acked-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The method is now in 0.59, using it simplifies some boolean conditions.
The other new methods .require() and .disable_auto_if() can be used too,
but introducing them is not just a matter of search-and-replace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running in TAP mode, stdout is reserved for the TAP protocol.
To see the "diff" of the failed test, we have to print it to
stderr instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220209101530.3442837-8-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
-----BEGIN PGP SIGNATURE-----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=/1qA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into staging
Block layer patches
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
# gpg: Signature made Fri 11 Feb 2022 17:44:52 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kwolf-gitlab/tags/for-upstream:
hw/block/fdc-isa: Respect QOM properties when building AML
iotests: Test blockdev-reopen with iothreads and throttling
block: Lock AioContext for drain_end in blockdev-reopen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
G/cvew==
=D+x7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging
Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
tests/tcg/multiarch: Add sigbus.c
tcg/sparc: Support unaligned access for user-only
tcg/sparc: Add tcg_out_jmpl_const for better tail calls
tcg/sparc: Use the constant pool for 64-bit constants
tcg/sparc: Convert patch_reloc to return bool
tcg/sparc: Improve code gen for shifted 32-bit constants
tcg/sparc: Add scratch argument to tcg_out_movi_int
tcg/sparc: Split out tcg_out_movi_imm32
tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
tcg/mips: Support unaligned access for softmmu
tcg/mips: Support unaligned access for user-only
tcg/arm: Support raising sigbus for user-only
tcg/arm: Reserve a register for guest_base
tcg/arm: Support unaligned access for softmmu
tcg/arm: Check alignment for ldrd and strd
tcg/arm: Remove use_armv6_instructions
tcg/arm: Remove use_armv5t_instructions
tcg/arm: Drop support for armv4 and armv5 hosts
tcg/loongarch64: Support raising sigbus for user-only
tcg/tci: Support raising sigbus for user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
v2: add my s-o-b marks to each commit
-----BEGIN PGP SIGNATURE-----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=+lgn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-nbd-2022-02-09-v2' into staging
nbd: handle AioContext change correctly
v2: add my s-o-b marks to each commit
# gpg: Signature made Fri 11 Feb 2022 13:14:55 GMT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-nbd-2022-02-09-v2:
iotests/281: Let NBD connection yield in iothread
block/nbd: Move s->ioc on AioContext change
iotests/281: Test lingering timers
iotests.py: Add QemuStorageDaemon class
block/nbd: Assert there are no timers when closed
block/nbd: Delete open timer when done
block/nbd: Delete reconnect delay timer when done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put an NBD block device into an I/O thread, and then read data from it,
hoping that the NBD connection will yield during that read. When it
does, the coroutine must be reentered in the block device's I/O thread,
which will only happen if the NBD block driver attaches the connection's
QIOChannel to the new AioContext. It did not do that after 4ddb5d2fde
("block/nbd: drop connection_co") and prior to "block/nbd: Move s->ioc
on AioContext change", which would cause an assertion failure.
To improve our chances of yielding, the NBD server is throttled to
reading 64 kB/s, and the NBD client reads 128 kB, so it should yield at
some point.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Prior to "block/nbd: Delete reconnect delay timer when done" and
"block/nbd: Delete open timer when done", both of those timers would
remain scheduled even after successfully (re-)connecting to the server,
and they would not even be deleted when the BDS is deleted.
This test constructs exactly this situation:
(1) Configure an @open-timeout, so the open timer is armed, and
(2) Configure a @reconnect-delay and trigger a reconnect situation
(which succeeds immediately), so the reconnect delay timer is armed.
Then we immediately delete the BDS, and sleep for longer than the
@open-timeout and @reconnect-delay. Prior to said patches, this caused
one (or both) of the timer CBs to access already-freed data.
Accessing freed data may or may not crash, so this test can produce
false successes, but I do not know how to show the problem in a better
or more reliable way. If you run this test on "block/nbd: Assert there
are no timers when closed" and without the fix patches mentioned above,
you should reliably see an assertion failure.
(But all other tests that use the reconnect delay timer (264 and 277)
will fail in that configuration, too; as will nbd-reconnect-on-open,
which uses the open timer.)
Remove this test from the quick group because of the two second sleep
this patch introduces.
(I decided to put this test case into 281, because the main bug this
series addresses is in the interaction of the NBD block driver and I/O
threads, which is precisely the scope of 281. The test case for that
other bug will also be put into the test class added here.
Also, excuse the test class's name, I couldn't come up with anything
better. The "yield" part will make sense two patches from now.)
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This is a rather simple class that allows creating a QSD instance
running in the background and stopping it when no longer needed.
The __del__ handler is a safety net for when something goes so wrong in
a test that e.g. the tearDown() method is not called (e.g. setUp()
launches the QSD, but then launching a VM fails). We do not want the
QSD to continue running after the test has failed, so __del__() will
take care to kill it.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The 'throttle' block driver implements .bdrv_co_drain_end, so
blockdev-reopen will have to wait for it to complete in the polling
loop at the end of qmp_blockdev_reopen(). This makes AIO_WAIT_WHILE()
release the AioContext lock, which causes a crash if the lock hasn't
correctly been taken.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-3-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
This adds simple instruction matching to the libinsn.so plugin which
is useful for examining the execution distance between instructions.
For example to track how often we flush in ARM due to TLB updates:
-plugin ./tests/plugin/libinsn.so,match=tlbi
which leads to output like this:
0xffffffc01019a918, 'tlbi vale1is, x1', 5702 hits, 31825 match hits, Δ+8112 since last match, 68859 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5703 hits, 56593 match hits, Δ+17712125 since last match, 33455 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5704 hits, 56594 match hits, Δ+12689 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5705 hits, 56595 match hits, Δ+12585 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5706 hits, 56596 match hits, Δ+10491 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5707 hits, 56597 match hits, Δ+4721 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5708 hits, 56598 match hits, Δ+10733 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5709 hits, 56599 match hits, Δ+61959 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5710 hits, 56600 match hits, Δ+55235 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5711 hits, 56601 match hits, Δ+54373 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5712 hits, 56602 match hits, Δ+2705 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5713 hits, 56603 match hits, Δ+17262 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5714 hits, 56604 match hits, Δ+17206 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5715 hits, 56605 match hits, Δ+28940 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5716 hits, 56606 match hits, Δ+7370 since last match, 33452 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5717 hits, 56607 match hits, Δ+7066 since last match, 33452 avg insns/match
showing we do some sort of TLBI invalidation every 33 thousand
instructions.
Cc: Vasilev Oleg <vasilev.oleg@huawei.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Emilio Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-25-alex.bennee@linaro.org>
We won't go fully flexible but for most system emulation 8 vCPUs
resolution should be enough for anybody ;-)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-24-alex.bennee@linaro.org>
Given the other failures it looks like general thread handling on sh4
is sketchy. It fails more often on CI than on my developer machine
though. See https://gitlab.com/qemu-project/qemu/-/issues/856 for more
details.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Laurent Vivier <laurent@vivier.eu>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-17-alex.bennee@linaro.org>
Support for CentOS 8 has stopped at the end of 2021, so let's
switch to the Stream variant instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201101911.97900-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-16-alex.bennee@linaro.org>
When running "make lcitool-refresh" in an out-of-tree build, it
currently fails with an error message from git like this:
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
Fix it by changing to the source directory first before updating
the submodule.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201085554.85733-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-15-alex.bennee@linaro.org>
On Debian we also need libibumad to enable RDMA:
$ ../configure --enable-rdma
ERROR: OpenFabrics librdmacm/libibverbs/libibumad not present.
Your options:
(1) Fast: Install infiniband packages (devel) from your distro.
(2) Cleanest: Install libraries from www.openfabrics.org
(3) Also: Install softiwarp if you don't have RDMA hardware
Add the dependency to lcitool's qemu.yml (where librdmacm and
libibverbs are already listed) and refresh the generated files
by running:
$ make lcitool-refresh
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-8-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-12-alex.bennee@linaro.org>
The previous commit removed all uses of libxml2.
Refresh lcitool submodule, update qemu.yml and refresh the generated
files by running:
$ make lcitool-refresh
Note: This refreshment also removes libudev dependency on Fedora
and CentOS due to libvirt-ci commit 18bfaee ("mappings: Improve
mapping for libudev"), since "The udev project has been absorbed
by the systemd project", and lttng-ust on FreeBSD runners due to
libvirt-ci commit 6dd9b6f ("guests: drop lttng-ust from FreeBSD
platform").
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-6-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-10-alex.bennee@linaro.org>
The script only include the local qemu.yml for Dockerfiles.
Since we want to keep the Cirrus-CI generated files in sync,
also use the --data-dir option in generate_cirrus().
Fixes: c45a540f4b (".gitlab-ci.d/cirrus: auto-generate variables with lcitool")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-4-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-8-alex.bennee@linaro.org>
If this starts causing failures again we should probably fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
This is no longer needed since a2ce7dbd91 ("meson: convert tests/qtest
to meson", 2020-08-21)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-2-alex.bennee@linaro.org>
A mostly generic test for unaligned access raising SIGBUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Part of ACPI ERST support
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmH/lpgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpntwH+LTJ3MIX5tHL2FWR9vfQoIOQms4A2YJb5GFv
f/wZMQ4Hx/4k3KsicJF4ONJ04cT4IuxtsY9WtUroNcpuh9qy+cMYw61xsd7oa2DB
k7vInrVaDP1pKmNzK+R1DV4VsbghAZzCh23hKKS8HGOd+DM6PWSozzCSpbQGerNX
H61bS7lvESLONhHIJdmo5/d4aGEGlt5xs2KzZe/pwl8OU4/WRYK8MgEKOhvAZT7T
Ups0IDSAOJ5pqzXCLESKFfImNIzak16+lnY9iOMcIFWQVEphMvjkn9jtCu4wvDRe
500GC8i9Q8X3B/D5Y9TB78mDuiqfQP69zBRfhSjgQeU9+eWCxA==
=JIT5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc: features, cleanups, fixes
Part of ACPI ERST support
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 06 Feb 2022 09:36:24 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (24 commits)
util/oslib-posix: Fix missing unlock in the error path of os_mem_prealloc()
ACPI ERST: step 6 of bios-tables-test.c
ACPI ERST: bios-tables-test testcase
ACPI ERST: qtest for ERST
ACPI ERST: create ACPI ERST table for pc/x86 machines
ACPI ERST: build the ACPI ERST table
ACPI ERST: support for ACPI ERST feature
ACPI ERST: header file for ERST
ACPI ERST: PCI device_id for ERST
ACPI ERST: bios-tables-test.c steps 1 and 2
libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb
libvhost-user: handle removal of identical regions
libvhost-user: prevent over-running max RAM slots
libvhost-user: fix VHOST_USER_REM_MEM_REG not closing the fd
libvhost-user: Simplify VHOST_USER_REM_MEM_REG
libvhost-user: Add vu_add_mem_reg input validation
libvhost-user: Add vu_rem_mem_reg input validation
tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()
tests: acpi: update expected blobs
acpi: fix OEM ID/OEM Table ID padding
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.
Update testcase to make sure that it's testing shorter IDs like it
used to before [2].
1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields whitespace padding to
padding with '\0' as it was before [1]. That will change OEM
Table ID for:
* SSDT.*: where it was padded from 6 characters to 8
* FACP.slic: where it was padded from 2 characters to 8
after reverting whitespace padding, it will be replaced with
'\0' which effectively will shorten OEM table ID to 6 and 2
characters.
Whitelist affected tables before introducing the change.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields padding with whitespace to
padding with '\0' as it was before [1]. As result test_oem_fields() will
fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables.
Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test
puts on QEMU CLI and expected values match.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows us to pack in some extra information about the failure,
which guarantees that if the caller did not *intentionally* cause a
failure (by capturing this Exception), some pretty good clues will be
printed at the bottom of the traceback information.
This will help make failures in the event of a non-negative return code
more obvious when they go unhandled; the current behavior in
_post_shutdown() is to print a warning message only in the event of
signal-based terminations (for negative return codes).
(Note: In Python, catching BaseException instead of Exception catches a
broader array of Exception events, including SystemExit and
KeyboardInterrupt. We do not want to "wrap" such exceptions as a
VMLaunchFailure, because that will 'downgrade' the exception from a
BaseException to a regular Exception. We do, however, want to perform
cleanup in either case, so catch on the broadest scope and
wrap-and-re-raise only in the more targeted scope.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This test checks that a raw image in use by a virtio-blk device does not
share the WRITE permission both before and after migration.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test-case "Corrupted size field in compressed cluster descriptor"
heavily depends on zlib compression type. So, make it explicit. This
way test passes with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Don't touch other incompatible bits, like compression-type. This makes
the test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type), so implement
specific option for it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
_qcow2_dump_header has filter for compression type, so this change
makes test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to add filtering in _qcow2_dump_header and want all tests
use it.
The patch is generated by commands:
cd tests/qemu-iotests
sed -ie 's/$PYTHON qcow2.py "$TEST_IMG" dump-header\($\| \)/_qcow2_dump_header\1/' ??? tests/*
(the difficulty is to avoid converting dump-header-exts)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll use it in tests instead of explicit qcow2.py. Then we are going
to add some filtering in _qcow2_dump_header.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Instead of qemu_img_log("info", ..) use generic helper img_info_log().
img_info_log() has smarter logic. For example it use filter_img_info()
to filter output, which in turns filter a compression type. So it will
help us in future when we implement a possibility to use zstd
compression by default (with help of some runtime config file or maybe
build option). For now to test you should recompile qemu with a small
addition into block/qcow2.c before
"if (qcow2_opts->has_compression_type":
if (!qcow2_opts->has_compression_type && version >= 3) {
qcow2_opts->has_compression_type = true;
qcow2_opts->compression_type = QCOW2_COMPRESSION_TYPE_ZSTD;
}
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-12-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The only "feature" of this "Formatting ..." line is that we have to
update it every time we add new option. Let's drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test checks different options. It of course fails if set
IMGOPTS='compression_type=zstd'. So, let's be explicit in what
compression type we want and independent of IMGOPTS. Test both existing
compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test prints qcow2 header fields which depends on chosen compression
type. So, let's be explicit in what compression type we want and
independent of IMGOPTS. Test both existing compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Move the logic to more generic qemu_img_pipe_and_status(). Also behave
better when we have several -o options. And reuse argument parser of
course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_verbose() has a drawback of not going through generic
qemu_img_pipe_and_status(). qemu_img_verbose() is not very popular, so
update the only two users to qemu_img_log() and drop qemu_img_verbose()
at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Adding support of IMGOPTS (like in bash tests) allows user to pass a
lot of different options. Still, some may require additional logic.
Now we want compression_type option, so add some smart logic around it:
ignore compression_type=zstd in IMGOPTS, if test want qcow2 in
compatibility mode. As well, ignore compression_type for non-qcow2
formats.
Note that we may instead add support only to qemu_img_create(), but
that works bad:
1. We'll have to update a lot of tests to use qemu_img_create instead
of qemu_img('create'). (still, we may want do it anyway, but no
reason to create a dependancy between task of supporting IMGOPTS and
updating a lot of tests)
2. Some tests use qemu_img_pipe('create', ..) - even more work on
updating
3. Even if we update all tests to go through qemu_img_create, we'll
need a way to avoid creating new tests using qemu_img*('create') -
add assertions.. That doesn't seem good.
So, let's add support of IMGOPTS to most generic
qemu_img_pipe_and_status().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support IMGOPTS for python iotests. Still some iotests
will not work with common IMGOPTS used with bash iotests like
specifying refcount_bits and compat qcow2 options. So we
should define corresponding unsupported_imgopts for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223160144.1097696-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support some addition IMGOPTS in python iotests like
in bash iotests. Similarly to bash iotests, we want a way to skip some
tests which can't work with specific IMGOPTS.
Globally for python iotests we will not support things like
'data_file=$TEST_IMG.ext_data_file' in IMGOPTS, so, forbid this
globally in iotests.py.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support IMGOPTS environment variable like in bash
tests. Corresponding global variable in iotests.py should be called
imgopts. So to not interfere with function argument, rename it in
advance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).
However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py. Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.
We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again. (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)
Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.
We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.
(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is anyway how check-block.sh is used in practice, and by removing the
list of formats in the script we avoid duplication between meson.build
and check-block.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.
Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This improves performance of running iotests during "make -jN check".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223183933.1497037-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.
Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.
Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making trace generation work for tests/ and qga/ would involve some
Meson hackery to ensure we generate the trace-events files before
trace-tool uses them. Since we don't actually support tracing there
anyway, we bypass that problem.
Let's add corresponding comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Pasto fixed, commit message punctuation tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
That should help catch build issues/regressions with wixl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220114084312.3725242-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
List test/data/acpi/virt/PPTT as the expected files allowed to
be changed in tests/qtest/bios-tables-test-allowed-diff.h
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20220107083232.16256-5-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmHm7y4ACgkQ+9DbCVqe
KkSsDwgAgWiOUtnPxNnZ3PuLQpIDCGSotjshCXo9PhPu/SWedvMfTftPU+g3wxbl
+A2GZcNnVPaOrJo7hfDtOtir9UJUFTmyv8KtPhUYmtxxiv3HWM1RvgrBQnMEvo5A
GFAq6jSFclH4HTSxz4FHbEl0TM3feQbSfbMWI6Q1Q+aPm8hWSzhClIqBCwsJJdm8
hi76BE9o94BtvA6Qv2CoPvGsOzpV0X0VXaljf1W927BzJu+b0wEGwIm61+eovNsh
DS2kDZk+PpiYeRN/oC40Z6ozR/Lf/jZ/87AnN3gV/yLDwa5cafA+GtmcKMx1IJIc
BVm0bJo+KzHfYiVjYTJhsU7C2W71PA==
=uBQq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' into staging
Various testing and other misc updates:
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
# gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits)
docker: include bison in debian-tricore-cross
FreeBSD: Upgrade to 12.3 release
test/tcg/ppc64le: Add float reference files
tests/tcg/multiarch: Read fp flags before printf
linux-user: don't adjust base of found hole
linux-user/elfload: add extra logging for hole finding
linux-user: expand reserved brk space for 64bit guests
docs/devel: more documentation on the use of suffixes
docs/devel: update C standard to C11
monitor: move x-query-profile into accel/tcg to fix build
hw/arm: add control knob to disable kaslr_seed via DTB
tests/docker: add libfuse3 development headers
tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
tests/docker: auto-generate alpine.docker with lcitool
tests/docker: fully expand the alpine package list
tests/docker: fix sorting of alpine image package lists
tests/docker: updates to alpine package list
.gitlab-ci.d/cirrus: auto-generate variables with lcitool
tests/docker: remove ubuntu.docker container
tests/docker: auto-generate opensuse-leap.docker with lcitool
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Binutils sometimes fail to build if bison is not installed:
/bin/sh ./ylwrap `test -f arparse.y || echo ./`arparse.y y.tab.c arparse.c y.tab.h arparse.h y.output arparse.output -- -d
./ylwrap: 109: ./ylwrap: -d: not found
(the correct invocation of ylwrap would have "bison -d" after the double
dash). Work around by installing it in the container.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/596
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221111624.352804-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220105135009.1584676-34-alex.bennee@linaro.org>
Note, since libtasn1 was fixed in 12.3 [*], this commit re-enables GnuTLS.
[*] https://gitlab.com/gnutls/libtasn1/-/merge_requests/71
Signed-off-by: Brad Smith <brad@comstyle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <YdUCQLVe5JSWZByQ@humpty.home.comstyle.com>
Message-Id: <20220105135009.1584676-31-alex.bennee@linaro.org>
We need to read the floating-point flags before printf may do
other floating-point operations which may affect the flags.
Hexagon reference files regenerated by Taylor Simpson.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1639510781-3790-1-git-send-email-tsimpson@quicinc.com>
Message-Id: <20211224035541.2159966-2-richard.henderson@linaro.org>
Message-Id: <20220105135009.1584676-29-alex.bennee@linaro.org>
The FUSE exports feature is not built because most container images do
not have libfuse3 development headers installed. Add the necessary
packages to the Dockerfiles.
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Tested-by: Beraldo Leal <bleal@redhat.com>
Message-Id: <20211207160025.52466-1-stefanha@redhat.com>
[AJB: migrate to lcitool qemu.yml and regenerate]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20220105135009.1584676-21-alex.bennee@linaro.org>
The two more or less overlap, because CONFIG_LINUX is a requirement for Linux
user-mode emulation. However, CONFIG_LINUX is technically a host symbol
that applies even to system emulation. Defining CONFIG_LINUX_USER, and
CONFIG_BSD_USER for eventual future use, is cleaner.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211210084836.25202-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-20-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-19-berrange@redhat.com>
Message-Id: <20220105135009.1584676-19-alex.bennee@linaro.org>
Richard Henderson
Peter Maydell
Will Cohen
David Miller
Vladimir Sementsov-Ogievskiy
Hanna Reitz
Thomas Huth
Liav Albani
Philippe Mathieu-Daudé
Jean-Philippe Brucker
Matheus Ferst
Miroslav Rezanina
Stefan Hajnoczi
Emanuele Giuseppe Esposito
Shengtan Mao
Peter Xu
Alex Bennée
Paolo Bonzini
Laurent Vivier
Eric Auger
Michael S. Tsirkin
Dr. David Alan Gilbert
Greg Kurz
Christian Schoenebeck
Daniel P. Berrangé
Kevin Wolf
Kevin Townsend
Eric DeVolder
Igor Mammedov
John Snow
Marc-André Lureau
Yanan Wang
Brad Smith