Commit Graph

19 Commits

Author SHA1 Message Date
Richard Henderson
51f4d916b5 util/bufferiszero: Use i386 host/cpuinfo.h
Use cpuinfo_init() during init_accel(), and the variable cpuinfo
during test_buffer_is_zero_next_accel().  Adjust the logic that
cycles through the set of accelerators for testing.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23 16:51:13 -07:00
Richard Henderson
5d133dd839 include/qemu/cpuid: Introduce xgetbv_low
Replace the two uses of asm to expand xgetbv with an inline function.
Since one of the two has been using the mnemonic, assume that the
comment about "older versions of the assember" is obsolete, as even
that is 4 years old.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-05 13:44:07 -08:00
Richard Henderson
701ea5870d util/bufferiszero: Use __attribute__((target)) for avx2/avx512
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.

Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-16 10:14:12 -10:00
Michael S. Tsirkin
2a728de1ff cpuid: use unsigned for max cpuid
__get_cpuid_max returns an unsigned value.
For consistency, store the result in an unsigned variable.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-04 09:07:43 -05:00
Robert Hoo
8f13a39dc0 util/bufferiszero: improve avx2 accelerator
By increasing avx2 length_to_accel to 128, we can simplify its logic and reduce a
branch.

The authorship of this patch actually belongs to Richard Henderson
<richard.henderson@linaro.org>, I just fixed a boundary case on his
original patch.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1585119021-46593-2-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-01 14:24:03 -04:00
Robert Hoo
b87c99d073 util/bufferiszero: assign length_to_accel value for each accelerator case
Because in unit test, init_accel() will be called several times, each with
different accelerator type.

Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1585119021-46593-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-01 14:24:03 -04:00
Robert Hoo
27f08ea1c7 util: add util function buffer_zero_avx512()
And intialize buffer_is_zero() with it, when Intel AVX512F is
available on host.

This function utilizes Intel AVX512 fundamental instructions which
is faster than its implementation with AVX2 (in my unit test, with
4K buffer, on CascadeLake SP, ~36% faster, buffer_zero_avx512() V.S.
buffer_zero_avx2()).

Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 23:02:21 +01:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Richard Henderson
5dd8990841 util: Introduce include/qemu/cpuid.h
Clang 3.9 passes the CONFIG_AVX2_OPT configure test.  However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.

Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-24 12:42:55 +01:00
Richard Henderson
d9911d14e0 cutils: Rewrite x86 buffer zero checking
Handle alignment of buffers, so that the vector paths
can be used more often.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1473800239-13841-1-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-14 12:25:14 +02:00
Richard Henderson
083d012a38 cutils: Add generic prefetch
There's no real knowledge of the cacheline size,
just prefetching one loop ahead.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-7-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:13:32 +02:00
Paolo Bonzini
86444f084b cutils: Add SSE4 version
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:13:32 +02:00
Richard Henderson
efad668245 cutils: Add test for buffer_is_zero
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-6-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:13:32 +02:00
Richard Henderson
43ff5e01ec cutils: Remove ppc buffer zero checking
For ppc64le, gcc6 does extremely poorly with the Altivec code.
Moreover, on POWER7 and POWER8, a hand-optimized Altivec version
turns out to be no faster than the revised integer version, and
therefore not worth the effort.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:13:32 +02:00
Richard Henderson
2250d3a293 cutils: Remove aarch64 buffer zero checking
The revised integer version is 4 times faster than the neon version
on an AppliedMicro Mustang.  Even with hand scheduling and additional
unrolling I cannot make any neon version run as fast as the integer.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:13:31 +02:00
Richard Henderson
5e33a87222 cutils: Rearrange buffer_is_zero acceleration
Allow selection of several acceleration functions
based on the size and alignment of the buffer.
Do not require ifunc support for AVX2 acceleration.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-5-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:13:30 +02:00
Richard Henderson
a1febc4950 cutils: Export only buffer_is_zero
Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:45 +02:00
Richard Henderson
8c70c1b0c7 cutils: Remove SPLAT macro
This is unused and complicates the vector interface.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-3-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:45 +02:00
Richard Henderson
88ca8e80de cutils: Move buffer_is_zero and subroutines to a new file
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-2-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:45 +02:00