Commit Graph

355 Commits

Author SHA1 Message Date
Cornelia Huck 32a02d070b pc-bios/s390-ccw: update binary
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-07-08 15:08:03 +02:00
Christian Borntraeger f2879a5c9e pc-bios/s390-ccw: store proper subsystem information word
POP chapter 17 requires to store a subsystem information word at 184
during IPL. Furthermore bytes 188-191 should be zero. The bootmap might
contain data blocks that are written to the first page. We have to
write these values after we processed the bootmap and before the final
IPL.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-07-08 15:08:03 +02:00
Alexey Kardashevskiy d6c23f8a1b pseries: Update SLOF firmware image to qemu-slof-20140630
The changelog is:
  > Quieten the grub warning
  > Add boot menu support
  > boot from disk having chrp-boot file
  > fat16: fix read and remove debug messages
  > dhcparch define missing in compilation
  > pci-scan: reserve memory for pci-bridge without devices
  > pci-bridge: Fix ranges when no device beyond the bridge
  > Set dhcp arch in board-qemu config file
  > xhci: fix controller stop
  > dhcp: support client architecture code 93
  > virtio-blk: support variable block size
  > usb: use common pci dma alloc/mapping routines
  > Remove unused SLOF code
  > pci-bridge: generic bridge needs to support pci dma functions
  > pci: extract dma functions as separate file
  > e1000: fix usage of multiple nics

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08 12:10:36 +02:00
Andreas Färber ee0f2601b9 prep: Update ppc_rom.bin
This replaces QEMU-side workarounds for PCI BARs and CPU reset.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-07-07 16:46:35 +02:00
Jens Freimann 77416f4075 pc-bios/s390-ccw: update binary
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:11:53 +02:00
Eugene (jno) Dvurechenski 564e52b96f pc-bios/s390-ccw: IPL from LDL/CMS-formatted ECKD DASD
Add code that allows us to start from two further ECKD DASD disk
layouts: LDL (Linux disk layout) and CMS (cms-formatted disk).

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:11:52 +02:00
Eugene (jno) Dvurechenski e0aff4aa3f pc-bios/s390-ccw: IPL from CDL-formatted ECKD DASD
Add code that allows us to start from ECKD DASD using the z/OS
compatible disk layout (CDL), which is the most common format for ECKD
DASD.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:11:52 +02:00
Eugene (jno) Dvurechenski a00b33d9e2 pc-bios/s390-ccw: factor out ipl code
Move the scsi-disk specific ipl code from zipl_load() into a new
function ipl_scsi(). This makes it easier to add ipl routines for other
disk types.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:11:49 +02:00
Eugene (jno) Dvurechenski 058cc1f311 pc-bios/s390-ccw: Add fill_hex_val func to provide better msgs
Factor out helper function for dumping a hex value into a buffer.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:10:28 +02:00
Eugene (jno) Dvurechenski 60612d5cbb pc-bios/s390-ccw: Unify error handling
Convert to IPL_assert and friends

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:10:28 +02:00
Eugene (jno) Dvurechenski a94b485e17 pc-bios/s390-ccw: add some utility code
IPL_assert(term,message) is introduced to handle error conditions.
ebcdic_to_ascii() to convert chars (mostly to print VOLSERs).
read_block() provision for unified block-number handling.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:10:28 +02:00
Eugene (jno) Dvurechenski 91a03f9b69 pc-bios/s390-ccw: handle different sector sizes
Use the virtio device's configuration to figure out the disk geometry
and use a sector size based upon the layout.

[CH: s/SECTOR_SIZE/MAX_SECTOR_SIZE/g]
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 12:10:03 +02:00
Eugene (jno) Dvurechenski 26f2bbd6b1 pc-bios/s390-ccw: cleanup and enhance bootmap defintions
Add declarations to describe structure of different dasd IPL sources
(eckd and fba). Move the structure definitions to a new header bootmap.h.
While we are at it, change structs to typedefs.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 11:58:47 +02:00
Eugene (jno) Dvurechenski abd696e4f7 pc-bios/s390-ccw: make checkpatch happy
Remove tabs, tweak whitespace and comments.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-27 11:57:25 +02:00
Jens Freimann 4ff51e6637 pc-bios/s390-ccw: update s390-ccw.img binary
Update s390-ccw.img to match with latest fixes

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-23 14:19:45 +02:00
Eugene (jno) Dvurechenski c77cd87cf5 pc-bios/s390-ccw: fix for fragmented SCSI bootmap
We need to interpret the last entry of the bootmap with zero
block count as "continuation pointer".
The "last entry" is being detected by pre-filling of the scratch
space with known values and respective look-ahead.

Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-23 14:03:31 +02:00
Christian Borntraeger 9629823290 pc-bios/s390-ccw: do a subsystem reset before running the guest
The loader BIOS has already activated several devices. Let's do a
subsystem reset before jumping into the guest. As there is no direct
way of doing so, we use diagnose 308 to bring the system in a
defined state. This is similar to what kdump on s390 uses. We have
to define a small trampoline function that restores the low bytes
to whatever the bootmap has written there.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-23 14:03:31 +02:00
David Hildenbrand 554f80896d pc-bios/s390-ccw: virtio_load_direct() can't load max number of sectors
The number of sectors to read is given by the last 16 bit of rec_list2.
1 is added in order to get to the real number of sectors to read (0x0000
-> read 1 block). For now, the maximum number (0xffff) led to 0 sectors
being read.

This fixes a bug where a large initrd (62MB) could not be ipled anymore.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-23 14:03:31 +02:00
Mark Cave-Ayland 871c60a736 Update OpenBIOS images
Update OpenBIOS images to SVN r1306 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-06-20 23:59:19 +01:00
Alexander Graf 4e73c78192 PPC: Add u-boot firmware for e500
This adds a special build of u-boot tailored for the e500 platforms we
emulate. It is based on the current version of upstream u-boot which
contains all the code necessary to drive our QEMU provided machines.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:35 +02:00
Gerd Hoffmann 3257fc8383 seabios: update to 1.7.5 final
git shortlog since -rc1:

Gerd Hoffmann (2):
      acpi: remove PORT_ACPI_PM_BASE constant
      Allow using full io region on q35.

Kevin O'Connor (2):
      vgabios: Add debug message if x86emu leal check triggers.
      python3 fixes for vgabios and csm builds.

Paolo Bonzini (1):
      smm: remove code to handle ACPI disable/enable

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:49:00 +02:00
Gerd Hoffmann d880b28cef ipxe: update to current git
Now that ipxe has separate settings for load / boot banner timeouts
re-enable the boot banner while keeping the load banner turned off,
so we don't add a delay to non-pxe boots.

git shortlog:

Adrian Jamróz (2):
      [rhine] Rewrite VIA Rhine driver
      [velocity] Rewrite VIA Velocity driver

Alex Williamson (4):
      [romprefix] Allow ROM banner timeout to be configured independently
      [autoboot] Enable infrastructure to specify an autoboot device location
      [prefix] Allow prefix to specify a PCI autoboot device location
      [romprefix] Store boot bus:dev.fn address as autoboot device location

Alexander Chernyakhovsky (1):
      [ocsp] Handle OCSP responses that don't provide certificates

Bo Yang (1):
      [build] Avoid strict-aliasing warning for gcc 4.3

Brandon Penglase (1):
      [build] Add vmware build target

Christian Hesse (2):
      [build] Update build system for Syslinux 6.x
      [build] Fix LABEL name for .liso images

Daniel P. Berrange (1):
      [zbin] Fix size used for memset in alloc_output_file

Frediano Ziglio (1):
      [romprefix] Fix incorrect pointer offset in undiloader.S

Kevin Tran (1):
      [tg3] Fix various tg3 issues

Marin Hannache (8):
      [linux] Add missing #include <stddef.h>
      [legal] Add FILE_LICENCE for valgrind headers
      [legal] Add FILE_LICENCE for core/errno.c
      [legal] Add FILE_LICENCE for ath9k driver headers
      [legal] Add missing FILE_LICENCE declarations
      [cmdline] Add "poweroff" command
      [nfs] Add support for NFS protocol
      [nfs] Fix an issue with the selection of a local port

Michael Brown (363):
      [netdevice] Separate VLAN support from presence of VLAN-supporting drivers
      [undi] Work around specific devices with known broken interrupt behaviour
      [menu] Prevent character code zero from acting as a shortcut key
      [menu] Prevent separators with shortcut keys from being selected
      [tftp] Allow TFTP block size to be controlled via the PXE TFTP API
      [pcbios] Add extra debugging messages when unhiding iPXE from memory
      [nbiprefix] Set up real-mode stack before jumping to .text16
      [prefix] Use %cs as implicit parameter to uninstall()
      [pcbios] Inhibit all calls to INT 15,e820 and INT 15,e801 during POST
      [romprefix] Display only one "Ctrl-B" prompt per PCI device during POST
      [efi] Update to latest EDK2 headers
      [autoboot] Split main control flow out of main() into a new function ipxe()
      [efi] Add last_opened_snpdev()
      [efi] Expose downloaded images via EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
      [efi] Add our own EFI_LOAD_FILE_PROTOCOL implementation
      [efi] Fix building with newer binutils
      [lkrnprefix] Allow relocation when no initrd is present
      [efi] Fix minor typos in efi_image.c
      [efi] Add EFI-specific debugging macros
      [int13] Split out ISO9660 and El Torito definitions to separate header files
      [smbios] Provide SMBIOS version number via smbios_version()
      [smbios] Mangle UUIDs for SMBIOS version 2.6 and newer
      [dhcp] Use PXE byte ordering for UUID in DHCP option 97
      [uuid] Abstract UUID mangling code out to a separate uuid_mangle() function
      [efi] Provide efi_guid_ntoa() for printing EFI GUIDs
      [efi] Add "reboot" command for EFI
      [cmdline] Add ability to perform a warm reboot
      [efi] Enable "cpuid" command by default for EFI
      [cs89x0] Remove conflicting macro definitions
      [igbvf] Remove conflicting macro definitions
      [prism2] Use standard type names
      [efi] Fetch device path for loaded image during initialisation
      [settings] Expose build architecture and platform via settings
      [bios] Fix screen clearing on buggy BIOSes
      [intel] Remove hardcoded offsets for descriptor ring registers
      [intel] Expose functionality to be shared with intelx driver
      [intel] Add intelx driver for Intel 10 Gigabit Ethernet NICs
      [efi] Remove obsolete EFI I/O implementation using EFI_CPU_IO_PROTOCOL
      [libc] Use __einfo() tuple as first argument to EUNIQ()
      [libc] Redefine low 8 bits of error code as "platform error code"
      [efi] Perform meaningful error code conversions
      [efi] Add sample platform-generated error disambiguations
      [netdevice] Use link-layer address as part of RNG seed
      [build] Allow sparse to find compiler.h
      [build] Define __WINT_TYPE__ if necessary
      [build] Allow sparse to be invoked via "make C=1"
      [build] Avoid sparse undeclared symbol warning for PROVIDE_SYMBOL()
      [process] Mark process descriptor as static in PERMANENT_PROCESS
      [realtek] Print bad MAC address in debug message when inferring no EEPROM
      [build] Use -Wno-decl when running sparse
      [build] Fix uses of literal 0 as a NULL pointer
      [build] Fix dubious uses of bitwise operators
      [build] Default to short wchar_t in stddef.h
      [realtek] Use ID word to detect EEPROM presence
      [errdb] Strip platform error code for non-platform-generated errors
      [pxe] Convert external PXE API errors into iPXE platform-generated errors
      [realtek] Allow reaction time between writing RTL_CAPR and reading RTL_CR
      [romprefix] Report failure cause when unable to open payload
      [realtek] Ensure EEPROM writes reach chip before starting udelay()
      [dhcp] Remove obsolete bootp.h header
      [netdevice] Add netdev_tx_defer() to allow drivers to defer transmissions
      [realtek] Defer packets when no transmit descriptors are available
      [settings] Eliminate settings "tag magic"
      [smbios] Allow access to unreferenced SMBIOS strings
      [smbios] Allow access to multiple instances of SMBIOS structures
      [crypto] Report meaningful error when certificate chain validation fails
      [build] Use $(eval) if available
      [build] Provide "allXXXs" targets for all media on all platforms
      [build] Add efidrv.cab target for UEFI Secure Boot signing
      [netdevice] Add "chip" setting
      [netdevice] Reset MAC address when asked to clear the "mac" setting
      [realtek] Fix reopening of legacy-mode 8139 NIC
      [crypto] Accept OCSP responses containing multiple certificates
      [bzimage] Align initrd images to page boundary
      [bzimage] Fix spurious uninitialised-variable warning on some gcc versions
      [build] Work around bug in gcc >= 4.8
      [autoboot] Use next-server from filename's settings block
      [tcp] Do not send RST for unrecognised connections
      [tcp] Fix comment to match code behaviour
      [test] Add self-tests for base16
      [base16] Generalise base16_decode() to hex_decode()
      [settings] Use hex_decode() to parse hex settings
      [settings] Add "hexraw" setting type
      [netdevice] Add "bustype" and "busloc" settings
      [settings] Add "busdevfn" setting type
      [linux] Add support for accessing PCI configuration space via /proc/bus/pci
      [settings] Add config/settings.h
      [settings] Expose PCI configuration space via settings mechanism
      [settings] Make "netX" settings block function as a symbolic link
      [cmdline] Accept "netX" in iPXE commands
      [lotest] Include sequence number within loopback test packets
      [intel] Incorporate ring producer and consumer counters in diagnostics
      [base16] Ensure base16_encode() always terminates its result string
      [realtek] Report RX error detail in debug messages
      [script] Allow for backslash continuation of script lines
      [settings] Add support for navigation keys in "config" user interface
      [realtek] Allow extra space in RX buffers
      [ifmgmt] Avoid relying on global variable within ifcommon_exec()
      [script] Avoid trying to read final character of a zero-length string
      [legal] Add missing FILE_LICENCE declarations
      [build] Fix %.licence build target
      [settings] Clarify usage of the term "named setting"
      [settings] Avoid potentially large stack allocations
      [settings] Remove temporary name buffer parameter from parse_setting_name()
      [settings] Remove default_type parameter from parse_setting_name()
      [settings] Expose parse_setting_name()
      [settings] Change "not-found" semantics of fetch_setting_copy()
      [settings] Add fetchf_setting_copy()
      [settings] Eliminate call to fetchf_named_setting() in expand_settings()
      [settings] Eliminate call to store_named_setting() in nslookup.c
      [settings] Remove now-unused store_named_setting()
      [parseopt] Allow parsed option to be modified
      [parseopt] Move parse_settings() to parseopt.c
      [parseopt] Add parse_setting()
      [settings] Eliminate call to storef_named_setting() in choose_exec()
      [settings] Eliminate calls to {fetch,store}f_named_setting() in NVO commands
      [settings] Remove now-unused fetchf_named_setting() and storef_named_setting()
      [script] Allow initial whitespace on lines containing labels
      [script] Allow commands following a script label
      [settings] Introduce the generalised concept of a numeric setting
      [cmdline] Add "inc" command
      [pci] Add pci_find_next() to iterate over existent PCI devices
      [cmdline] Add "pciscan" command to allow iteration over PCI devices
      [udp] Move high-frequency debug messages to DBGLVL_EXTRA
      [ipv6] Rename sin_{family,port} to sin6_{family,port} in struct sockaddr_in6
      [tcpip] Allow binding to unspecified privileged ports (below 1024)
      [settings] Expose CPUID instruction via settings mechanism
      [test] Add self-tests for snprintf()
      [settings] Allow numeric_setting_value() to handle long setting values
      [settings] Expose memory map via settings mechanism
      [params] Add support for the general concept of a form parameter list
      [cmdline] Add "params" and "param" commands to manage form parameter lists
      [uri] Allow URIs to incorporate a parameter list
      [http] Add support for HTTP POST
      [settings] Make built-in settings a linker table
      [linux] Give tap devices a name and bus type
      [ipv4] Generalise fragment reassembly mechanism
      [netdevice] Increase maximum network-layer address length
      [netdevice] Add concept of a network device index
      [netdevice] Add method for generating EUI-64 address from link-layer address
      [ethernet] Add support for generating multicast hash for IPv6 addresses
      [linux] Apply MAC address prior to registering network device
      [tcpip] Pass through network device to transport layer protocols
      [neighbour] Generalise concept of neighbour discovery
      [ipv4] Abstract out protocol-specific portions of "route" command
      [ipv6] Replace IPv6 stack
      [ipv6] Fix uninitialised-variable warning
      [tcp] Reduce path MTU to 1280 bytes
      [ipv6] Add inet6_aton()
      [build] Work around bug in gcc >= 4.8
      [neighbour] Add nstat() function to print out neighbour table
      [cmdline] Add "nstat" command
      [tcp] Add AF_INET6 socket opener
      [udp] Add AF_INET6 socket opener
      [netdevice] Add find_netdev_by_index()
      [socket] Add concept of a generalised socket address converter
      [ipv4] Add IPv4 socket address converter
      [ipv6] Add IPv6 socket address converter
      [resolv] Use sock_aton() to allow parsing of arbitrary numeric addresses
      [icmp] Add support for sending ICMP echo requests
      [ping] Add concept of a ping socket
      [ping] Add generic ping mechanism
      [ping] Add top-level ping() function to ping a host
      [cmdline] Add "ping" command
      [ipv6] Handle IPv6 option length correctly
      [ipv6] Extract link layer addresses from router advertisements
      [ipv6] Support stateless address autoconfiguration (SLAAC)
      [ipv6] Treat sin6_scope_id consistently
      [ipv6] Automatically choose source for link-local and multicast destinations
      [pxe] Always retrieve cached DHCPACK and apply to relevant network device
      [ipv6] Add ndp_tx_router_solicitation() to send router solicitations
      [parseopt] Add parse_timeout()
      [netdevice] Make all net_driver methods optional
      [interface] Default to calling intf_restart() in response to intf_close()
      [job] Allow job_progress() to return an ongoing job status code, if known
      [monojob] Add timeout parameter to monojob_wait()
      [monojob] Report ongoing job status as overall return status on timeout
      [cmdline] Rewrite "sync" command to use monojob_wait()
      [autoboot] Fix shell banner timeout
      [ifmgmt] Rewrite iflinkwait() to use monojob_wait()
      [cmdline] Allow "if<xxx>" commands to take options
      [netdevice] Add generic concept of a network device configurator
      [dhcp] Add DHCP network device configurator
      [parseopt] Add parse_netdev_configurator()
      [ifmgmt] Add ifconf() to carry out network device configuration
      [autoboot] Use ifconf() to configure network device
      [cmdline] Add "ifconf" command
      [cmdline] Make "dhcp" command a synonym for "ifconf"
      [dhcp] Remove obsolete dhcp() function
      [ipv6] Add IPv6 network device configurator
      [cmdline] Generate command option help text automatically
      [pxe] Ensure cached DHCPACK is retrieved prior to network device creation
      [base16] Fix comparison of signed and unsigned integers
      [settings] Move user-class setting from dhcp.c to settings.c
      [ipv6] Use given source address only if it is not the unspecified address
      [ipv6] Add "ipv6" setting type
      [dhcpv6] Add basic support for stateful and stateless DHCPv6
      [ipv6] Separate the concepts of prefix and address creation
      [dhcpv6] Allow stateful DHCPv6 to apply obtained IPv6 addresses
      [test] Include failing code within failed test result output
      [main] Defer "initialising devices" message until initialising devices
      [console] Pass escape sequence context to ANSI escape sequence handlers
      [pixbuf] Add generic concept of a pixel buffer
      [image] Allow for non-executable image formats
      [image] Add image_pixbuf() to create pixel buffer from image
      [pnm] Add support for PNM images
      [mucurses] Use "<ESC>[2J" ANSI escape sequence to clear screen
      [console] Allow console input and output to be disabled independently
      [console] Add concept of generic console configuration
      [cmdline] Add "console" command to configure console
      [fbcon] Add generic concept of a frame buffer console
      [vesafb] Add VESA frame buffer console
      [vesafb] Include raw status value within VBE error messages
      [vesafb] Skip modes for which we cannot get mode information
      [vesafb] Return meaningful error when no suitable mode is found
      [vesafb] Select an optimal mode, rather than the first acceptable mode
      [build] Fix building on OpenBSD 5.4
      [console] Allow '?' as an intermediate byte in ANSI escape sequences
      [mucurses] Implement curs_set() to control cursor visibility
      [settings] Hide cursor when not actively editing a setting
      [menu] Hide cursor when displaying menu
      [fbcon] Add support for displaying a cursor
      [settings] Explicitly separate the concept of a completed fetched setting
      [settings] Allow for IPv6 setting types in non-IPv6 builds
      [settings] Add fetch_ipv6_setting()
      [dns] Add support for resolving IPv6 addresses via AAAA records
      [socket] Ensure socket address structure sizes are fixed
      [syslog] Add support for IPv6 syslog server
      [ipv6] Add support for resolving IPv6 addresses via the "nslookup" command
      [linux] Provide access to SMBIOS via /dev/mem
      [dhcpv6] Use DUID-UUID form of client DUID
      [settings] Force settings into alphabetical order within sections
      [settings] Allow for multiple definitions of each predefined setting
      [settings] Merge SETTING_IPv4 and SETTING_IPv6
      [dhcpv6] Add DHCPv6 "filename" setting
      [ipv6] Expose NDP-provided settings (including the DNS server)
      [vesafb] Work around data corruption bug in bochs/qemu VBE implementation
      [settings] Adapt user interface to fit display size
      [login] Adapt user interface to fit display size
      [menu] Adapt user interface to fit display size
      [console] Allow consoles to update the recorded console size
      [fbcon] Update the console width and height after changing mode
      [lkrnprefix] Include iPXE version string in image header
      [fbcon] Always draw cursor using current foreground and background colours
      [console] Add centralised concept of colours and colour pairs
      [mucurses] Use centralised concept of colour pairs
      [cmdline] Add the "colour" and "cpair" commands
      [console] Add concept of a "magic" colour
      [vesafb] Set "magic" colour to transparent when a background picture is used
      [build] Remove obsolete check for GNU as version 2.9.1
      [ipv6] Fix compilation under FreeBSD
      [build] Build ROMs used by qemu and VMware as part of "make all"
      [libc] Add isprint()
      [test] Add okx() macro taking an explicit file name and line number
      [deflate] Add support for DEFLATE decompression
      [deflate] Fix literal data length calculation
      [libc] Add abs()
      [uaccess] Add memcmp_user()
      [test] Rewrite pnm_ok() using okx()
      [test] Generalise pnm_ok() to pixbuf_ok()
      [png] Add support for PNG images
      [vesafb] Handle failures from fbcon_init()
      [fbcon] Centre background picture on console
      [fbcon] Allow for an arbitrary margin around the text area
      [vesafb] Allow for an arbitrary margin around the text area
      [cmdline] Rename "console" command's --bpp option to --depth
      [cmdline] Add margin options to the "console" command
      [fbcon] Allow ANSI CUP with missing arguments
      [cmdline] Always clear screen after reconfiguring console
      [intel] Add some missing PCI IDs
      [dns] Support DNS search lists
      [dns] Update end-of-name pointer after processing CNAME record
      [dhcp] Copy exactly the required length when resizing DHCP options
      [settings] Remove "uristring" setting type
      [params] Use reference counters for form parameter lists
      [uri] Refactor URI parsing and formatting
      [image] Ensure every image has a fully resolved URI
      [tcpip] Add IP statistics collection as per RFC 4293
      [cmdline] Add the "ipstat" command
      [prefix] Ignore PCI autoboot device location if set to 00:00.0
      [tcpip] Provide tcpip_netdev() to determine the transmitting network device
      [tcpip] Provide tcpip_mtu() to determine the maximum transmission unit
      [tcp] Calculate correct MSS from peer address
      [bzimage] Report exact initrd length via bzImage header
      [realtek] Include link status register details in debug messages
      [romprefix] Do not clobber stack segment when returning to BIOS
      [netdevice] Mark devices as open before calling open() method
      [tcp] Update window even if ACK does not acknowledge new data
      [linux] Avoid starting currticks() from zero every time
      [http] Use a retry timer to trigger retried requests
      [http] Automatically retry request on a 503 Service Unavailable
      [mii] Add mii_dump() to dump all MII registers
      [realtek] Dump all MII register contents when link status changes
      [monojob] Reset timeout when progress is made
      [image] Add "--timeout" parameter to image downloading commands
      [efi] Allow for 64-bit EFI_STATUS codes
      [efi] Allow driver to be unloaded
      [efi] Connect driver to devices as part of installation
      [console] Fix display of characters with top bit set
      [lotest] Allow loopback testing on shared networks
      [netdevice] Notify upper-layer drivers when RX processing is (un)frozen
      [efi] Avoid accidentally calling main() twice
      [efi] Unload our own image before exiting UEFI application
      [efi] Disable SNP devices when running iPXE as the application
      [realtek] Add ability to dump all internal registers
      [realtek] Clear bit 24 of RCR
      [bios] Fix screen clearing on even more buggy BIOSes
      [http] Accept Content-Length header with trailing whitespace
      [crypto] Remove dynamically-allocated storage for certificate name
      [crypto] Remove dynamically-allocated storage for certificate OCSP URI
      [build] Remove long-obsolete mechanism for wrapping embedded images
      [build] Disable ccache for all relevant build targets
      [build] Add dependency of generated files upon Makefile
      [crypto] Add pubkey_match() to check for matching public/private key pairs
      [crypto] Generalise X.509 cache to a full certificate store
      [crypto] Use fingerprint when no common name is available for debug messages
      [crypto] Allow signed timestamp error margin to be configured at build time
      [test] Rewrite X.509 tests using okx()
      [test] Rewrite CMS tests using okx()
      [test] Add tests for x509_check_name()
      [test] Add subject alternative names to X.509 server test certificate
      [crypto] Add support for subjectAltName and wildcard certificates
      [crypto] Allow wildcard matches on commonName as well as subjectAltName
      [intel] Avoid completely filling the TX descriptor ring
      [test] Rewrite TCP/IP tests using okx()
      [test] Add self-tests for flsl()
      [libc] Add inline assembly implementation of flsl() using BSR instruction
      [test] Add tests for 64-bit division
      [build] Fix __libgcc attribute for recent gcc versions
      [test] Check for correct -mrtd assumption on libgcc arithmetic functions
      [libc] Add isqrt() function to find integer square roots
      [libc] Add flsll()
      [profile] Add generic profiling infrastructure
      [cmdline] Add "profstat" command to display profiling statistics
      [netdevice] Profile common operations
      [intel] Profile common virtual machine operations
      [intel] Push new RX descriptors in batches
      [librm] Use genuine real mode to accelerate operation in virtual machines
      [ipv4] Profile transmit and receive datapaths
      [tcp] Profile transmit and receive datapaths
      [http] Profile receive datapath
      [downloader] Profile receive datapath
      [build] Allow for a debug level of zero
      [librm] Allow interrupts in protected mode
      [comboot] Use built-in interrupt reflector
      [pcbios] Do not switch to real mode to check for timer interrupt
      [pcbios] Do not switch to real mode to sleep the CPU
      [test] Print out profiling statistics after a successful test run
      [librm] Add a profiling self-test for measuring mode transition times
      [librm] Add meaningful labels at section changes
      [librm] Speed up protected-to-real mode transition under KVM
      [librm] Speed up real-to-protected mode transition under KVM
      [librm] Speed up protected-mode calls under KVM
      [profile] Provide methods for profiling individual stages of operations
      [librm] Add profiling self-tests for complete real_call and prot_call cycles
      [pxe] Profile all PXE API calls
      [pxe] Profile UNDI transmit datapath
      [pxe] Work around missing PXENV_UNDI_OPEN only when necessary
      [undi] Profile all PXE API calls
      [undi] Profile transmit and receive datapaths
      [undi] Report any PXENV_UNDI_ISR errors via netdev_rx_err()
      [undi] Do not switch to real mode to check for NIC interrupt
      [undi] Place an upper limit on the number of PXENV_UNDI_ISR calls per poll

Peter Pickford (1):
      [serial] Enable UART FIFOs

Robin Smidsrød (2):
      [settings] Add "version" builtin setting
      [build] Include ipxe.pxe in default build

Stefan Hajnoczi (2):
      [netdevice] Add vlan_tag() to get the VLAN tag of a network device
      [iscsi] Include 802.1Q VLAN identifier in iBFT

Thomas Miletich (3):
      [3c90x] Stall upload engine before setting RX ring address
      [3c90x] Don't round up transmit packet length
      [3c90x] Fix High-MTU packet reception

lolipop (1):
      [intel] Add Intel I217 Gigabit Ethernet PCI ID

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-15 14:24:05 +02:00
Gerd Hoffmann db76ec6291 seabios: update to 1.7.5-rc1
Code grew a bit, had to disable CONFIG_USB_UAS to make the
bios for the old machine types continue top fit into 128k.

git shortlog since 1.7.4:

Eric Northup (2):
      init_virtio_blk, init_virtio_scsi: reset HBA on error
      vp_init_simple: enable PCI bus-mastering before relying on DMA.

Gabriel L. Somlo (1):
      SMBIOS: Check for aggregate tables & entry point in fw_cfg

Gerd Hoffmann (4):
      smbios: catch zero-length strings
      pci: improve io address space allocation
      xhci: allocate scratch pad buffers
      vga: rework bar detection, add virtio-vga

Johannes Krampf (5):
      build: Remove unneccesary semicolons from acpi_extract scripts.
      build: Make print statements in scripts python3 compatible.
      build: Be explicit that we want integers when dividing for python3 compat.
      build: Avoid sort() on unordered classes for python3 compatibility.
      build: Be careful with unicode and byte strings for python3 compatibility.

Kevin O'Connor (79):
      build: Don't trash the .config file when src/Kconfig changes.
      Remove the pmm handle argument from _malloc().
      Clear the total block transfer count on error.
      Remove unnecesary updates of the disk op->count field.
      Always perform thread cleanup on MainThread stack.
      pvscsi: Don't store reference to struct pci_device.
      pvscsi: Always run entirely in 32bit mode.
      pvscsi: Remove use of LOWFLAT and GLOBALFLAT macros.
      usb: Replace EHCI to UHCI/OHCI synchronization with new scheme.
      Minor - pciinit.c - order header files and use static on local functions.
      Minor - fix misspelling in romfile.c comment.
      ehci: memset the qTD structures in ehci_alloc_intr_pipe
      build: Update kconfig to version in Linux 3.13.
      scripts: Allow encodeint.py to take integers in hex notation.
      coreboot: Support alternative locations for CBFS.
      debug: Add runtime option to not report the debug serial port to the OS.
      debug: Only call serial_debug_preinit() at startup.
      debug: Unify the SeaBIOS debug version banner.
      xhci: Use 64bit writes to ERDP register.
      xhci: Fix incorrect direction setting on status transmissions.
      xhci: Set the interval parameter on interrupt pipes.
      xhci: Verify PAGESIZE register before initializing driver.
      xhci: Allocate and free the xhci inctx structure on each use.
      xhci: Move set_address code from xhci_control to xhci_alloc_pipe.
      xhci: Eliminate 'struct xhci_device'.
      xhci: Support xhci controllers with 64 byte contexts.
      xhci: Allow the XHCI USB controller to be enabled for coreboot.
      xhci: Don't use a dummy endpoint count in configure command.
      xhci: Report the "protocol defined" and PSIC bits of extended capabilities.
      xhci: Support USB hubs on xhci controllers.
      Add call32_params() helper function.
      Add space between DTYPE_* definitions.
      xhci: Run the XHCI driver entirely in 32bit mode.
      Remove pci_writel() and pci_readl() functions.
      xhci: Check if scratch pad allocation fails.
      Increase maximum size of permanent high memory area.
      usb: USB 3 devices encode bMaxPacketSize0 field.
      usb: Move default pipe max packet size code from xhci to main code.
      xhci: Use the same endpoint initialization code in xhci_alloc_pipe()
      xhci: Add copyright notice to usb-xhci.c
      vgabios: Make sure exported structs use PACKED.
      vgabios: Simplify the bios save state area.
      vgabios: Simplify save/restore mechanism.
      vgabios: Attempt to detect old x86emu and force a fault.
      vgabios: Don't interpret TAB character.
      vgabios: Refactor write_teletype and write_chars.
      vgabios: Make sure stdvga_list_modes() doesn't overrun the buffer.
      coreboot: Add support for a "links" file to have aliases in CBFS.
      Enhance nullTrailingSpace() so that it can also skip leading spaces.
      coreboot: Move links file processing to its own function.
      vgabios: Fix PMM allocation request size.
      smbios: Default all values to zero.
      usb: Only disable HID devices if both USB_MOUSE and USB_KEYBOARD are off.
      Minor - fix some typos in comments.
      Replace CONFIG_THREAD_OPTIONROMS with a runtime config setting.
      acpi: Move acpi parsing logic from acpi.c to biostables.c / paravirt.c.
      smbios: Move smbios parsing logic from smbios.c to biostables.c.
      Move PirAddr definition from pirtable.c to biostables.c.
      Use biostables.c for copying bios tables even when generating them.
      Document no new changes to pirtable.c, mptable.c, acpi.c, and smbios.c.
      apm: Remove old Bochs mechanism for shutdown/suspend/standby.
      Minor - remove unused includes from pci.c.
      vgabios: Add option to control use of standard VGA IO ports.
      vgabios: Split vgafb_scroll() into separate move and clear functions.
      vgabios: Rewrite vgafb.c graphics operations to set of 4 standard operators.
      vgabios: Introduce text_address().
      vgabios: Add support for manipulating framebuffers in high memory.
      Set the color attribute when calling vgabios print character.
      vgabios: PMM scan was incorrectly depending on a zero %ds segment.
      coreboot: Make coreboot table searching available to other code.
      vgabios: Initial support for coreboot native vga vgabios.
      Minor - replace some tab characters that slipped into the code.
      Factor out smbios table walking from display_uuid to smbios_next().
      vgabios: Define PlatformRunningOn to make compile happy.
      If an int 1587 call is made from an option rom, stay in bigreal mode.
      xhci: Use msleep() instead of mdelay() for port status delay.
      build: Make sure romlayout.o is recompiled on Kconfig change.
      Fix int 1589 calls when CONFIG_ENTRY_EXTRASTACK is enabled.
      acpi: Fix acpi dsdt compile warning.

Laszlo Ersek (1):
      init_virtio_scsi(): reset the HBA before freeing its virtio ring

Marcel Apfelbaum (3):
      resume: restore piix pm config registers after resume
      hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
      hw/pci: check if pci2pci bridges implement optional limit registers

Roger Pau Monne (1):
      ld: don't hardcode "-melf_i386"

Sander Eikelenboom (1):
      Prevent build failure by not splitting line in the middle of arguments to checkrom.py script

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-15 14:05:26 +02:00
Stefan Weil d461863d3c Add QEMU logo (SVG file)
The "Q" of the logo is already included in pc-bios/qemu_logo_no_text.svg.

This file now adds the complete logo as it was designed by Benoît Canet.
Benoît licensed it under CC-BY 3.0, see
http://lists.gnu.org/archive/html/qemu-devel/2012-02/msg02865.html.

Unneeded borders from Benoît's original logo were removed,
and metadata (license, author, date) was added in this version.

Cc: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-28 08:55:31 +04:00
Alexey Kardashevskiy 3636226ae4 pseries: Update SLOF firmware image to qemu-slof-20140404
The change log is:
  > Isolate sc 1 detection logic
  > build: auto-detect ppc64 architecture
  > cas: increase hcall buffer size to accomodate 256 cpus
  > usb: change device tree naming
  > usb-core: adjust port numbers in set_address
  > virtio-scsi: correct srplun comment
  > Fix kernel loading
  > Workaround to make grub2 assign server ip from dhcp ack packet only
  > ELF: Enter LE binary in LE mode
  > ELF loading should fail for virt != phys

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-04-08 11:20:00 +02:00
Andreas Färber 4c1410d59c prep: Update ppc_rom.bin
This increases file size from 512 KiB to 1 MiB.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-03-13 20:15:37 +01:00
Peter Maydell be86c53c05 PowerPC queue for 2.0-rc0
* QEMUMachine include cleanup
 * SLOF update
 * XICS reset fix
 * sPAPR PCI host bridge refactorings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTIR0LAAoJEPou0S0+fgE/4rMP/ReyYRPSXFFu2PXt2werCYcA
 P5Agynib/O5LXTBgZCOSkTrRYBE2+5bq3Zp3iQe7gkLrpbRjHJLulwBpFW3rlVQO
 5IWxMoFC1eW+PE9k+V0hRdTFXMfVxvvHam3g77XVGb4lm/thwHkQ2RYa7z1V4zCP
 hbj/gVdZA7pzXQZfLnOU6illaVCBjYeajEle5sagLlN+DANFSm3G/BdYWPTtxKxq
 MLiMEdaZJkBG/NG3zocyuCsWeF+oLyh8fB4IQUjORq7x8v749DgprQjFUy3YMrB5
 Ph5CQXyVyyiZSXmfbdINMpQPxdPaVm2rtBD9ol7p+mXtc6UOS3uzbFQ75XXiG401
 crqDpc74iXYpxmwtSs9FwD8TFqh5n8NFGEN8U3MOkhcNQ3zdjnlbVRMG1aqFIUne
 SbQeWC5Qg3MI7UruStq9n3l/3SL3KJSRRrT11ndO/4UoHT6PZfBKQ4eCD8XiHmPu
 /p0ahfnl8/UvMyTWVJhBvLt5G6+v8aumKJR/47jhrPnqLFCk4yUDbCdT5a5KSDjt
 ZauyfGlIQcORXKRbVw+DRgSQjeGLoQJMtOVqDXnKwS8j8cuhF2JebBCVTPHHjC72
 UTRYk5/tLjcZCLD7Vscpd4uRiuz69xJu/MCvwqUwSZ3TssuoW3Vl0/giLyajMxTU
 RLn0uLaFguDX+DoSNIAy
 =icAj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/ppc-for-2.0' into staging

PowerPC queue for 2.0-rc0

* QEMUMachine include cleanup
* SLOF update
* XICS reset fix
* sPAPR PCI host bridge refactorings

# gpg: Signature made Thu 13 Mar 2014 02:50:51 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/ppc-for-2.0:
  spapr-pci: Convert fprintf() to error_report()
  spapr-pci: Convert to QOM realize
  xics-kvm: Fix reset function
  pseries: Update SLOF firmware image to qemu-slof-20140304
  Move QEMUMachine typedef to qemu/typedefs.h
  Revert "KVM: Split QEMUMachine typedef into separate header"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-13 13:19:46 +00:00
Alexey Kardashevskiy 8f3babb74d pseries: Update SLOF firmware image to qemu-slof-20140304
The changelog is:
  > version: update to 20140304
  > Introduce dummy console device
  > vio-vscsi: Fix CRQ allocation alignment
  > version: update to 20140204
  > virtio-9p: disable unused structure
  > Make "boot net:dhcp" boot from IPv4 only
  > Fix virtio device shutdown
  > Change shutdown method name for virtio-scsi
  > Add support for 64bit LE ABI v1 and v2 support
  > Change representation of string environment variable
  > cas: return error when unknown node found
  > version: update
  > Reset obp-tftp arguments before parsing
  > Enable seamless netboot on IPv6 network
  > Fix shutdown for virtio devices
  > Fix zero checksum in UDP header
  > Handle router advertisement message properly
  > [oex]hci_exit: Check before freeing/unmapping memory
  > Work around missing sc 1 traps on pHyp
  > fix print_version() to return where it came from
  > usb-xhci: memory freeing and using returns as bool uniformly
  > Output banner and initial display output in VNC window
  > use VERSION file to generate FW version
  > cas: remove warning
  > Add support for loading little endian ELF binaries.
  > Add bswap_{16,32,64}p
  > dhcpv6 and other minor net-snk fixes
  > Fix missing drop in virtio-fs setup-alias
  > Find next available alias name
  > SLOF does not exit if given 1KB disk
  > boot: enable support for bootindex
  > pci-properties: add properties to enable hotplug for spapr
  > e1000: remember node handle
  > Increase quiesce tokens array size
  > virtio: timeout after 5sec
  > Enable IPv6 support in dns
  > usb-ohci: fix warnings
  > Add ipv6 support in net-snk
  > ipv4: fix frame overwriting following arp_send_request
  > e1000: fix SLOF_dma_map_out arguments
  > Maintain single global packet buffer for tftp
  > Increase virtio-net receive queue size
  > Increase veth receive queue size
  > Fix dprintf macros at various points
  > usb-ohci: rewrite done_head processing code
  > boot: add net in default boot order
  > block 0 address in the allocator
  > scsi: make-media-alias fix
  > usb-xhci: add xhci host controller support
  > usb-xhci: add xhci support
  > Avoid veth read/write calls with zero length buffer
  > boot: include other aliases
  > usb-core: disable xhci

Cc: Andreas Färber <afaerber@suse.de>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2014-03-13 03:49:48 +01:00
Andreas Färber 21143b615a prep: Update ppc_rom.bin
Functionally, this is a revert of Jocelyn's r3309 /
55aa45ddde (Quickly hack PowerPC BIOS
able to boot on CDROM again.), for which we do not have the sources.

Therefore the sources used are v0.4.1 plus pc-bios/ohw.diff plus a
workaround turning IDE errors into warnings.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-03-12 17:26:40 +01:00
Andreas Färber fd3ece2533 Add OpenHack'Ware submodule
This replaces the ohw.diff file on top of v0.4.1.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-03-12 17:26:32 +01:00
Mark Cave-Ayland 5264917bcf Update OpenBIOS images
Update OpenBIOS images to SVN r1280 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-03-10 08:48:31 +00:00
Peter Maydell c2cb92f9ea Several features, fixes and cleanups for kvm/s390:
- sclp event facility: cleanup structure. This allows to use
   realize/unrealize   as well as migration support via vmsd
 - reboot: Two fixes that make reboot much more reliable
 - ipl: make elf loading more robust
 - flic interrupt controller: This allows to migrate floating
   interrupts, as well as clear them on reset etc.
 - enable async_pf feature of KVM on s390
 - several sclp fixes and cleanups
 - several sigp fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTDwZVAAoJEBF7vIC1phx8lx4P/Rv+UVD9XDFFF8yHuye1am40
 NpRGjdarQ/9QUkS4gqyKwYUvIjAClk5id7U2d5zrfdc8XC49AH0ZhVFMdRupaOon
 AUqXjOXD5zAh9bfUcewg1EK1P1VuKcp0hyh0jFlIqk9Xmidw8N5guQ6iBoTqGJD5
 UYTp0PuSqIjY1RCuF4fCTCurzRd1+J2oKcQBip7BSWlVuWZlg2/hPxoIraLezlz2
 huwOU9tkSGXwSRv4C6fCcukEwlqnvkE6W0MCrHrcb2T8xYwAR2Jjs0TsscbKxb+t
 lIjZRiCxBrFwOLUqGN8DMYtZPffR+cigZ5bYb4o3PPJ0DQL4vLQVd8SPMPrdJhbb
 M7UOaeTclSTQuzmM/Uuc1pmrFc8PDq0dg50dT3weH2bW8aSgyqutYGpmUcm1Q6kq
 JLFuyswOBr1vS9o0TlBunP4+TqJJrnGvtIQ4EbRZm7zP78mBaIIrUcAZlbgOI+XI
 cSjtFXkBOCz0j28J9GSHrsWMC7RQ179TGdcH/FjDpu0dNDOxH7eH5gZPQoQDAqwC
 SjstqJdIFnd0qxOB1EqcgMUxbSqQYq3hoGvJ644ZrMA3T5trBn0fSw3J9ZU/qAK7
 EvOKRacMfcacIj4l0aEQgpwqVmktwIYnkfetX/QAKw/4AImJz/R9GRkmYgjCfOH8
 /CUfXM71zWLEdv1o5uJ5
 =toIt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' into staging

Several features, fixes and cleanups for kvm/s390:

- sclp event facility: cleanup structure. This allows to use
  realize/unrealize   as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
  interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups

* remotes/borntraeger/tags/kvm-s390-20140227: (22 commits)
  s390x/ipl: Fix crash of ELF images with arbitrary entry points
  s390x/kvm: Rework priv instruction handlers
  s390x/kvm: Add missing SIGP CPU RESET order
  s390x/kvm: Rework SIGP INITIAL CPU RESET handler
  s390x/cpu: Use ioctl to reset state in the kernel
  s390-ccw.img: new binary rom to match latest fixes
  s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
  s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
  s390x/event-facility: exploit realize/unrealize
  s390x/event-facility: add support for live migration
  s390x/event-facility: code restructure
  s390x/event-facility: some renaming
  s390x/sclp: Fixed setting of condition code register
  s390x/sclp: Add missing checks to SCLP handler
  s390x/sclp: Fixed the size of sccb and code parameter
  s390x/eventfacility: mask out commands
  s390x/virtio-hcall: Specification exception for illegal subcodes
  s390x/virtio-hcall: Add range check for hypervisor call
  s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
  s390x/async_pf: Check for apf extension and enable pfault
  ...

Conflicts:
	linux-headers/linux/kvm.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04 14:50:46 +00:00
Mark Cave-Ayland 9eb08a435a sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27 10:01:41 +00:00
Christian Borntraeger 0ca3611221 s390-ccw.img: new binary rom to match latest fixes
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27 09:51:26 +01:00
Christian Borntraeger 5d739a4787 s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
We have to set the cssid to 0, otherwise the stsch code will
return an operand exception without the m bit. In the same way
we should set m=0.

This case was triggered in some cases during reboot, if for some
reason the location of blk_schid.cssid contains 1 and m was 0.
Turns out that the qemu elf loader does not zero out the bss section
on reboot.

The symptom was an dump of the old kernel with several areas
overwritten. The bootloader does not register a program check
handler, so bios exception jumped back into the old kernel.

Lets just use a local struct with a designed initializer. That
will guarantee that all other subelements are initialized to 0.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-02-27 09:51:26 +01:00
Christian Borntraeger d1028f1b5b s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
The current code does not initialize next_idx in the virtio ring.
As the ccw bios will always use guest memory at a fixed location,
this queue might != 0 after a reboot.
Lets make the initialization explicit.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-02-27 09:51:25 +01:00
Brad 46eef33b89 Fix QEMU build on OpenBSD on x86 archs
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:

>From the OpenBSD buildbots..
  Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC

Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-17 11:44:00 +00:00
Peter Maydell 4db0014521 Update seabios to 1.7.4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS76rkAAoJEEy22O7T6HE4vgAP/itjSXiG9jLiUAa7VBtvmWET
 rUONruU9PXE/0UnKsg/jZwYiCRCPjIZMV98gCbLJ2ol4+1trfFlEoLwPRfnEVcSl
 hA4Qn/EFe+2MbWAMJySEFZcuyMmQsLe4JUJSf7kB0kaYrRmfchsLtDLtRMufjiet
 KILQVx63jzKO5iUej5ITdcDxPRjnRY0j917XSsZzQUPOE1OtpCwR7JVF3J/HqqvR
 ZXB5J8iedFDPV9w6my4jeIqJIYinW1rTTlT9BtImikYyJ6jcluJnkM8qihiLgQ2f
 KdH8OdT5nJ+Z/dpPNWkcM89uuP+gEQR+/sZpH+TPhyBb2C4kAdqtB9Vi10QkpoRv
 NJ8xk02Nr0JlEvs1fC1SVzNoIM/7HTazDDzTyLg+3MMF329jKcWQ2pqfyTqvvcC7
 Dp8S+ZSohGIJDvGXNtgHM+rDw0W97wkCC3AOWw3cOV8LMoE9qwLQ0JvNknUkDPic
 ufy10kPiF5Xujwq+RhNP7m0c061CtdWuSkxkGD58c6mkqKd2Qp/Xr9F+iL+MBDW3
 zfQfulxXO3ux3WdmcPauXMQ2zu4nEHzBWkn5H2eiVipBRRGSg7jaelhUY1X/VtoI
 f437B+XW3XMCni7gnHTjF/IXxwkQa+mcAdRVRiG+VMuI+9ObTgUhBcUXF/iLAXeT
 nR/0lSwI+ljh5wuZ9p1Z
 =sM1G
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-roms-1' into staging

Update seabios to 1.7.4

# gpg: Signature made Mon 03 Feb 2014 14:42:44 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-roms-1:
  Update seabios binaries to 1.7.4
  Update seabios submodule to 1.7.4
  roms: remove explicit MAKEFLAGS from recursive make invocations

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-07 16:42:13 +00:00
Peter Maydell 9396b05a5a Merge remote-tracking branch 'remotes/mcayland/qemu-openbios' into staging
* remotes/mcayland/qemu-openbios:
  Update OpenBIOS images

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-04 16:16:37 +00:00
Gerd Hoffmann 41419b0f11 Update seabios binaries to 1.7.4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-03 15:40:01 +01:00
Stefan Weil 3babcc8704 pc-bios: Remove execute flag from BIOS files
BIOS files are not directly executable, so they don't need this flag.
All other BIOS files don't use the execute flag.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-16 14:46:19 +04:00
Mark Cave-Ayland fbb9c590ca Update OpenBIOS images
Update OpenBIOS images to SVN r1246 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-01-12 07:52:44 +00:00
Gerd Hoffmann 6eefccc0bb roms: update vgabios binaries
This also switches from lgplvgabios to seavgabios.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06 08:55:42 +01:00
Gerd Hoffmann 385724e788 roms: update seabios binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06 08:55:42 +01:00
Mark Cave-Ayland da87dd7bd7 sun4m: Add FCode ROM for TCX framebuffer
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.

SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.

The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21 17:38:52 +01:00
Anthony Liguori 38dc74907e Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
  configure: Use -B switch only for Python versions which support it
  qga: Fix shutdown command of guest agent to work with SysV
  console: Remove unused debug code
  qga: Fix compilation for old versions of MinGW
  .travis.yml: basic compile and check recipes
  pci-assign: Fix error_report of pci-stub message
  qapi: Fix comment for create-type to match code.
  vl: fix build when configured with no graphic support
  usb: drop unused USBNetState.inpkt field
  qemu-char: add missing characters used in keymaps
  qemu-char: add support for U-prefixed symbols
  qemu-char: add Czech keymap file
  qemu-char: add Czech characters to VNC keysyms

Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19 12:59:26 -08:00
Jan Krupa 3751e72246 qemu-char: add Czech keymap file
This patch adds Czech keyboard layout to available keymap files
and Makefile.

Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-13 15:48:38 +04:00
Alexey Kardashevskiy 9d0e1dac10 pseries: Update SLOF firmware image
SLOF git commit is e2e8ac901e617573ea383f9cffd136146d0675a4

The main changes are:
* fixed bug with not passing arguments from -append
* client-architecture-support hypercall
* netboot
* USB stack fixes

The full list of changes:
  > client-architecture-support: fix wrong version read
  > client-architecture-support: fix redundant stack drop
  > Update device tree returned by CAS hypercall
  > fdt: introduce fdt-init
  > Add ibm,client-architecture-support method
  > Kernel parameter passed from qemu commandline ignored
  > Allow more than one client to open net devices simultaneously
  > ci: add missing close in else condition
  > Add GPT support
  > pci: fix interrupt-map for bridges
  > usb-ohci: preserve the toggleCarry bit in ED
  > usb-ohci: done_head processing fixes
  > usb-ohci: update init and rationalize timings
  > usb-msc: handle stall and other fixes
  > scsi: make probe more error resilient
  > usb-core: Add CLEAR FEATURE api
  > Implement range allocator
  > Remove bcm57xx network driver as module
  > Remove e1000 network driver as module
  > Remove virtio-net network driver as module
  > Remove veth network driver as module
  > Add missing close-dev in ping
  > Remove lodable network driver modules and related functions
  > Add bcm57xx network driver in libbcm
  > Add e1000 network driver in libe1k
  > Add virtio-net driver in libvirtio
  > Add veth driver in libveth
  > Get MAC address for client interface module
  > Add SLOF usleep wrapper
  > Add SLOF pci wrapper functions
  > Fix 'canon' client interface

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-11-08 04:33:19 +01:00
Alexey Kardashevskiy 09b04845a7 pseries: Update SLOF firmware image
This has reworked USB OHCI and adds support of USB EHCI,
VIRTIO-SCSI and various fixes (IBM VSCSI, VGA and more).

The full list of fixes is:
*  usb-ohci: Convert td-phys every time to td-virt
*  usb-storage: Fix cbwflags field
*  Add -fno-strict-aliasing in global CFLAGS
*  usb: fix various issues found with js2x
*  Move hex64-{decode,encode}-unit to node.fs
*  usb: Use separate in-memory endian swap
*  usb-ohci: collect TDs from done list
*  js2x: more fixes
*  js2x: Fix build of takeover image
*  js2x: use new usb stack
*  usb-ohci: Use proper memory barriers always
*  usb: Fix a couple of warnings
*  Fix $cat-instance-unit
*  Cache phandle of /chosen
*  Use root.fs on qemu as well
*  usb-ehci: Add ehci handshake
*  usb: add mb for write accessors
*  usb-ohci: add missing memory barriers
*  usb-ohci: suspend the controller in exit code path
*  usb-ohci: Add a reset when closing the OHCI
*  usb: Use proper accessors for MMIO and separate in-memory endian swap
*  Use a global definition of sync() and mb()
*  net-snk: Remove exception handling
*  usb: unmap buffers
*  slof: call quiesce on closing of stdin
*  usb-kbd: accept "s" to drop to OF prompt
*  USB storage driver
*  usb-ohci: add Bulk transfer support
*  usb-ehci: Add bulk support
*  usb-core: add usb bulk support
*  USB generic hub device driver
*  usb-ehci: setup new device
*  usb-ehci: Check ehci ports
*  usb-ehci: initialize controller
*  USB keyboard driver
*  usb-core: setup new device
*  usb-core: create dev pool allocation
*  usb-ohci: implement ohci send control
*  usb-core: usb send control
*  usb-core: implement usb_{get,put}_pipe routines
*  usb-ohci: allocate pipe pool
*  usb-ohci: reset, init and check-ports
*  Add standard header stdbool.h
*  usb-slof: forth support routines for C
*  usb-ehci: Add USB EHCI skeleton
*  usb-core: Add register accessor functions
*  Use __builtin_bswap routines for endianness swapping
*  usb-core: hcd registration and query routines
*  usb-core: adding generic dev-hci.fs
*  usb-core: registration and makefiles
*  Add new USB code
*  Remove old usb code
*  vga: fix hcall-invert-screen and hcall-blink-screen
*  Enumerate disk/cdrom aliases for multiple disks or cdroms
*  scsi: unify scsi probing code
*  vscsi: generalizing probe code
*  virtio-scsi: iterate through targets
*  scsi: unify and use make-disk-alias
*  nvram: remove unnecessary prints
*  Add hack to client interface finddevice of "/memory"
*  scsi: Fix cdrom boot crash when no medium present
*  Look for /memory@0, not just /memory
*  Fix instance>qname crashing when displaying instance arguments
*  Fix js2x build
*  scsi-disk: Bound check read-blocks
*  Fix off by one error in scsi-disk get-capacity
*  scsi: fix report-luns handling
*  SLOF: virtio-scsi block driver code
*  scsi: Move bits of vio-vscsi.fs to a common helpers file
*  scsi: Move scsi-disk.fs to a generic place
*  SLOF: virtio-scsi helper routines
*  SLOF: virtio-scsi - add pci device file
*  iso9660: Don't constantly reallocate the read buffer
*  vscsi: Sanitize interface between scsi-disk.fs and vio-vscsi.fs
*  vio-vscsi: Rework vio-vscsi support
*  virtio: Add a virtio-set-qaddr helper
*  disk-label: Allocate 4096 bytes for 4k block devices
*  disk-label: Increase the max size of the PReP boot partition
*  Make load-base a real environment variable
*  vio-vscsi: Switch to using a wildcard "disk" node and make scsi-disk generic
*  Fix disk-label package to use proper instance path
*  Increase size of catpad
*  Fix instance>path to contain unit address for wildcard nodes
*  Fix handling of wildcard nodes in open-dev
*  vio-vscsi: Get CRQ on open and release on close

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:45 +02:00
Stefan Hajnoczi 8593898109 Use qemu-project.org domain name
qemu.org is held by a third-party and no core community contributor has
access to the DNS configuration.  This leaves the website exposed to
outages due to DNS issues or IP address changes.  For example, if the
web server IP address needs to change we cannot guarantee qemu.org will
point to it!

The newer qemu-project.org domain name is owned by Anthony Liguori
<anthony@codemonkey.ws>.  You can confirm this by querying the whois
information.  Also note that the #qemu IRC channel topic already
references qemu-project.org.

Short of having a dedicated legal entity to hold the domain name on
behalf of the community, qemu-project.org seems like the safest bet.

Let's replace references to qemu.org with qemu-project.org.

Note that git-submodule(1) does not detect URL changes.  The following
commands clear out and re-initialize all submodules to ensure you are
using the latest URLs:

  $ git submodule deinit . # you'll be warned if you have local changes
  $ rm -rf .git/modules    # also clear cached .git/ directories
  $ git submodule update --init

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1381495958-8306-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11 09:34:56 -07:00