Commit Graph

20 Commits

Author SHA1 Message Date
Isaku Yamahata 9bcfc7daab ioapic: when switches to level trigger mode, interrupts raised repeatedly.
- the trigger mode is edge at first
- During initializatoin, the interrupt is raised as edge which is masked.
  The corresponding bit of irr is set.
- Then the mode is switched to level and it's unmasked.
- the bit of irr is set, so the interrupt is raised repeatedly by
  ioapic_service().
- OS considers that the irq line is broken and falls back to polling mode.

This patch fixes the issues.
After raising edige, clear the bit of irr.

> Bringing up interface eth0:
> Determining IP information for eth0...irq 18: nobody cared (try booting with the "irqpoll" option)
> Pid: 4126, comm: ip Not tainted 2.6.38-rc7 #1
> Call Trace:
>  <IRQ>  [<ffffffff8105b009>] ? __report_bad_irq+0x38/0x87
>  [<ffffffff8105b177>] ? note_interrupt+0x11f/0x188
>  [<ffffffff8105bacf>] ? handle_fasteoi_irq+0xa7/0xd1
>  [<ffffffff810046ff>] ? handle_irq+0x83/0x8c
>  [<ffffffff81003eb9>] ? do_IRQ+0x48/0xaf
>  [<ffffffff81300513>] ? ret_from_intr+0x0/0xe
>  [<ffffffff81031ab8>] ? __do_softirq+0x4f/0x114
>  [<ffffffff81002d6c>] ? call_softirq+0x1c/0x28
>  [<ffffffff81004647>] ? do_softirq+0x33/0x68
>  [<ffffffff810316fb>] ? irq_exit+0x36/0x38
>  [<ffffffff81015f2c>] ? smp_apic_timer_interrupt+0x88/0x96
>  [<ffffffff81002853>] ? apic_timer_interrupt+0x13/0x20
>  <EOI>  [<ffffffff810177ed>] ? __ioapic_set_affinity+0x68/0x7c
>  [<ffffffff813000f0>] ? _raw_spin_unlock_irqrestore+0x8/0xa
>  [<ffffffff8105a84f>] ? __setup_irq+0x224/0x2cb
>  [<ffffffff8120e3c5>] ? e1000_intr+0x0/0x103
>  [<ffffffff8105a9c7>] ? request_threaded_irq+0xd1/0x114
>  [<ffffffff8120e396>] ? e1000_request_irq+0x34/0x63
>  [<ffffffff8121237d>] ? e1000_open+0x81/0x11f
>  [<ffffffff8129097c>] ? call_netdevice_notifiers+0x45/0x4a
>  [<ffffffff81290d8d>] ? __dev_open+0x97/0xc4
>  [<ffffffff8128e9c5>] ? __dev_change_flags+0xb9/0x13d
>  [<ffffffff81290cc1>] ? dev_change_flags+0x1c/0x51
>  [<ffffffff812d0542>] ? devinet_ioctl+0x26e/0x594
>  [<ffffffff812d174c>] ? inet_ioctl+0x92/0xaa
>  [<ffffffff81281d75>] ? T.1003+0x13/0x32
>  [<ffffffff81282152>] ? sock_ioctl+0x1f2/0x1ff
>  [<ffffffff810ae2d3>] ? do_vfs_ioctl+0x498/0x4e7
>  [<ffffffff81281203>] ? sock_alloc_file+0xb3/0x115
>  [<ffffffff8109f79f>] ? fd_install+0x31/0x5d
>  [<ffffffff810ae364>] ? sys_ioctl+0x42/0x65
>  [<ffffffff81001f3b>] ? system_call_fastpath+0x16/0x1b
> handlers:
> [<ffffffff8120e3c5>] (e1000_intr+0x0/0x103)
> Disabling IRQ #18

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03 21:52:57 +02:00
Jan Kiszka 1f5e71a8e6 ioapic: Style & magics cleanup
Fix a few style issues and convert magic numbers into prober symbolic
constants, also fixing the wrong but unused IOAPIC_DM_SIPI value.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-04 06:33:26 -06:00
Jan Kiszka 5dce499948 ioapic: Add support for qemu-kvm's vmstate v2
qemu-kvm carries the IOAPIC base address in its v2 vmstate. We only
support the default base address so far, and saving even that in the
device state was rejected.

Add a padding field to be able to read qemu-kvm's old state, but
increase our version to 3, indicating that we are not saving a valid
address. This also gives downstream the chance to change to stop
evaluating the base_address and move to v3 as well.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-04 06:33:26 -06:00
Jan Kiszka 35a74c5c59 ioapic: Save/restore irr
This is a guest modifiable state that must be saved/restored properly.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-04 06:33:26 -06:00
Jan Kiszka 0280b571c1 ioapic: Implement EOI handling for level-triggered IRQs
Add the missing EOI broadcast from local APIC to the IOAPICs on
completion of level-triggered IRQs. This ensures that a still asserted
IRQ source properly re-triggers an APIC IRQ.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-04 06:33:26 -06:00
Alexander Graf 2507c12ab0 Add endianness as io mem parameter
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00
Blue Swirl 9605111958 ioapic: convert to qdev
Convert to qdev.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-19 07:41:43 +00:00
Blue Swirl 7d0500c49a ioapic: unexport ioapic_set_irq
There's no need to use ioapic_set_irq() outside of ioapic.c, so
make it static.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-17 16:32:47 +00:00
Blue Swirl 9af9b330c5 ioapic: improve debugging
Add a DPRINTF macro, use it also to see irq deliveries.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-31 18:59:45 +00:00
Blue Swirl aa28b9bf9b Move x86 specific PC declarations to a separate file
x86 definitions (especially CPUState uses) prevent many files from
being compiled within libhw.

Move x86 specific declarations (APIC stuff) to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:46:26 +00:00
Anthony Liguori c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc 99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Juan Quintela 3e9e98889b vmstate: port ioapic device
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 11:10:08 -05:00
Blue Swirl d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Avi Kivity 1632dc6a8f Route IOAPIC interrupts via ISA bus
Instead of calling the IOAPIC from the PIC, raise IOAPIC irqs via the ISA bus.
As a side effect, IOAPIC lines 16-23 are enabled.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24 08:01:42 -05:00
Blue Swirl 8167ee8839 Update to a hopefully more future proof FSF address
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16 20:47:01 +00:00
Jan Kiszka a08d43677f Revert "Introduce reset notifier order"
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 14:18:08 -05:00
Avi Kivity 1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Jan Kiszka 8217606e6e Introduce reset notifier order
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.

Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:34 -05:00
aliguori 610626af30 From 67e94ae77f8de4d5d822917f1723cefa7ebfb64d Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Tue, 3 Mar 2009 13:33:13 +0800
Subject: [PATCH] Split ioapic logic from the current apic.

Add a new ioapic.c to hold ioapic's logic, and also
make it work for ia64.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
---
 Makefile.target |    2 +-
 hw/apic.c       |  237 +++----------------------------------------------
 hw/ioapic.c     |  263 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/pc.h         |    5 +-
 4 files changed, 281 insertions(+), 226 deletions(-)
 create mode 100644 hw/ioapic.c


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6827 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-12 20:25:12 +00:00