Provide a simple bootloader code at the reset address that jumps to the
loaded image entry point when it's not equal to the reset address. This
is needed because the old method of setting pc doesn't work due to cpu
reset done after the machine setup.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
While at it rename lx60 (named after the first board of the family) to
more generic xtfpga (the family name).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On KC705 bootloader area is located at FLASH offset 0x06000000, not 0 as
on older xtfpga boards.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The function moxie_intc_create() is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Its only contents are a dead memcpy. Since it is optional,
drop the function altogether.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
'monitor.h' is still included in target-s390x/kvm.c, since I have
no good way to verify whether other code need it on my x86 host.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Param name is declared as optional, since in code it is an optional
one.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a pc & q35 only machine opt.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount
of ram below 4G.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix 32 bit
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This commit expands all uses of the INLINE macro and drop it.
The reason for this is to avoid clashes with external libraries with
bad name conventions and also because renaming keywords is not a good
practice.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code is broken: it does surprise removal which crashes guests.
Reimplemented the steps:
- Hotplug triggers both 'present detect change' and
'attention button pressed'.
- Hotunplug starts by triggering 'attention button pressed',
then waits for the OS to power off the device and only
then detaches it.
Fixes CVE-2014-3471.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is needed by hot-unplug in order to get an indication
from the OS when the device can be physically detached.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trivial issue, discovered while debugging.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc-q35-1.4 was incorrectly using PC_COMPAT_1_4 instead of
PC_Q35_COMPAT_1_4.
The only side-effect was that the hpet compat property (inherited from
PC_Q35_COMPAT_1_7) was missing.
Without this patch, pc-q35-1.4 inicorrectly initializes hpet-intcap to
0xff0104 (behavior introduced in QEMU 2.0, by commit
7a10ef51c2).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Currently vectors silently cleared to 0 if the initialization is failed,
but user should at least have one way to notice this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also fix minor indentation issues in the surrounding code.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable calling set_ics() from within e1000_autoneg_timer() without
the need for a forward declaration.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generate a link status change interrupt once link auto-netotiation
is successfully completed. This does not affect Linux and Windows
(XP and 7 tested) in any way, but is needed by the stock OS X driver
(AppleIntel8254XEthernet.kext), which would otherwise fail to notice
the link status change event.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using mii-tool (on F20-live), the following output is produced:
SIOCGMIIREG on ens3 failed: Input/output error
ens3: no autonegotiation, 1000baseT-FD flow-control, link ok
The first line (SIOCGMIIREG error) is due to mii-tool's inability
to read the PHY auto-negotiation expansion register.
On the second line, "no autonegotiation" is wrong, and caused by
the absence of a flag in the link partner ability register which
would indicate that our link partner has acked us. This flag is
listed as "reserved" in the Intel e1000 manual, but mii-tool uses
it as LPA_LPACK from /usr/include/linux/mii.h.
This patch adds read access to PHY_AUTONEG_EXP and defines the
link partner ack flag, allowing mii-tool to generate output as
normally expected:
ens3: negotiated 1000baseT-FD flow-control, link ok
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch emulates auto-negotiation when the network link status
is modified externally (i.e. via "set_link <id> off/on").
Also, a couple of cleanup items:
- unset PHY status reg. AUTONEG_COMPLETE during link_down()
- set PHY status reg. AUTONEG_COMPLETE during autoneg_timer() only
if we actually brought the link up.
- group all checks for "can we, and should we autonegotiate?"
together for more clarity.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost user does not support LOG_ALL feature bit.
Generally, we should not try to set this bit without
checking that backend can support it first.
Detect and block migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By just never doing write-backs. This is completely invisible to the
guest, as the entire storage area is implemented as device state (at
realize time the entire drive is read in).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sync_page() was conditionalizing it's whole fn body on the bdrv being
non-null. Just return for the function immediately on NULL brdv and
get rid of the big if.
Makes implementation consistent with flash_zynq_area().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The array regs is declared with IOMMU_NREGS (3) elements and accessed
using IOMMU_CTRL (0) and IOMMU_BASE (8). In most cases, those values
are right shifted before being used as an index which results in indices
0 and 1. In one case, this right shift was missing for IOMMU_BASE which
results in an out-of-bounds write access with index 8.
The patch adds the missing shift operation also for IOMMU_CTRL where
it is needed only for cosmetic reasons.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add VMStateDescription for GT64120 PCI emulation used by the Malta
platform, to allow it to work with savevm/loadvm and live migration.
The entire register array is saved/restored using VMSTATE_UINT32_ARRAY
(fixed length GT_REGS = 1024).
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
[james.hogan@imgtec.com: Convert to VMState]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* remotes/kvm/uq/master:
hw/mips: malta: Don't boot from flash with KVM T&E
MAINTAINERS: Add entry for MIPS KVM
target-mips: Enable KVM support in build system
hw/mips: malta: Add KVM support
hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
target-mips: kvm: Add main KVM support for MIPS
kvm: Allow arch to set sigmask length
target-mips: get_physical_address: Add KVM awareness
target-mips: get_physical_address: Add defines for segment bases
hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
hw/mips/cputimer: Don't start periodic timer in KVM mode
target-mips: Reset CPU timer consistently
KVM: Fix GSI number space limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTowW+AAoJECgfDbjSjVRpnMMH/jp3sKGzJumYLbi5ihjmYyND
jYd6ySXoVAjUTgaCvdje5srisOap8pbc783kQvQS4CeWsjZ5Vvh+PZjkBPIqF1pD
celxGQ43CY7QSUWq+02Dg9VIUwLwZqdKlxNsV01FligQn+ZBQ6sQ6ksWx7oGzqRt
5/HMZykbwUvSk/4xGUaMn2+/4uhQ0Wz5EsCkv9L/u8kS72k6ldc/tCGZMzBUNHTM
rW5FPYwMQP0MXgGTXnlLEQjJ7Lozc66IaMZoHw/a/aGSIxdag9Otj0ADuXq6yZaV
Xi4O/EOJWd1JpSG7w8LOyIZNakpHkU43fmJCLzBjDAupHeRp57TcW5ox4PJYAtg=
=Oxdt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,hotplug fixes, enhancements
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (109 commits)
numa: use RAM_ADDR_FMT with ram_addr_t
qapi/string-output-visitor: fix bugs
tests: simplify code
qapi: fix input visitor bugs
acpi: rephrase comment
qmp: add ACPI_DEVICE_OST event handling
qmp: add query-acpi-ospm-status command
acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
acpi: introduce TYPE_ACPI_DEVICE_IF interface
qmp: add query-memory-devices command
numa: handle mmaped memory allocation failure correctly
pc: acpi: do not hardcode preprocessor
qmp: clean out whitespace
qdev: recursively unrealize devices when unrealizing bus
qdev: reorganize error reporting in bus_set_realized
qapi: fix build on glib < 2.28
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
tests: fix memory leak in test of string input visitor
hmp: add info memdev
...
Conflicts:
include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support PSCI 0.2 when using KVM
* fix AIRCR reset value for v7M CPUs
* report correct size information for pflash_cfi01
* minor coverity fixes
* avoid warnings on Windows builds due to #define clash
* implement TTBCR PD0/PD1 bits
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=IOau
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140619' into staging
target-arm:
* Support PSCI 0.2 when using KVM
* fix AIRCR reset value for v7M CPUs
* report correct size information for pflash_cfi01
* minor coverity fixes
* avoid warnings on Windows builds due to #define clash
* implement TTBCR PD0/PD1 bits
# gpg: Signature made Thu 19 Jun 2014 18:35:06 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140619:
armv7m_nvic: fix AIRCR implementation
Use PSCI v0.2 compatible string when KVM or TCG provides it
target-arm: Introduce per-CPU field for PSCI version
target-arm: Implement kvm_arch_reset_vcpu() for KVM ARM64
target-arm: Enable KVM_ARM_VCPU_PSCI_0_2 feature when possible
target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64
kvm: Handle exit reason KVM_EXIT_SYSTEM_EVENT
hw/block/pflash_cfi01: Report correct size info for parallel configs
hw/arm/vexpress: Forbid specifying flash contents in two ways at once
target-arm/translate-a64.c: Fix dead ?: in handle_simd_shift_fpint_conv()
target-arm/translate-a64.c: Remove dead ?: in disas_simd_3same_int()
target-arm: Add ULL suffix to calculation of page size
hw/arm/spitz: Avoid clash with Windows header symbol MOD_SHIFT
target-arm: implement PD0/PD1 bits for TTBCR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In KVM trap & emulate (T&E) mode the flash reset region at 0xbfc00000
isn't executable, which is why the minimal kernel bootloader is loaded
and executed from the last 1MB of DRAM instead.
Therefore if no kernel is provided on the command line and KVM is
enabled, exit with an error since booting from flash will fail.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The returned reset value was wrong (off by one zero nibble), and
qemu didn't log unimplemented writes to the PRIGROUP field.
Signed-off-by: Oran Avraham <oranav@gmail.com>
Message-id: 1403010447-4627-1-git-send-email-oranav@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
