Commit Graph

163 Commits

Author SHA1 Message Date
Mark Cave-Ayland 74518fb615 q800: add default vendor and product information for scsi-cd devices
The MacOS CDROM driver uses a SCSI INQUIRY command to check that any SCSI CDROMs
detected match a whitelist of vendors and products before adding them to the
list of available devices.

Add known-good default vendor and product information using the existing
compat_prop mechanism so the user doesn't have to use long command lines to set
the qdev properties manually.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland 0fc37adac6 q800: add default vendor and product information for scsi-hd devices
The Apple HD SC Setup program uses a SCSI INQUIRY command to check that any SCSI
hard disks detected match a whitelist of vendors and products before allowing
the "Initialise" button to prepare an empty disk.

Add known-good default vendor and product information using the existing
compat_prop mechanism so the user doesn't have to use long command lines to set
the qdev properties manually.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland 2724b90dfb q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices
By default quirk_mode_page_truncated should be enabled for all scsi-cd devices
connected to the q800 machine to allow A/UX to enumerate SCSI CDROM devices
without hanging.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland d9a107d153 q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices
By default quirk_mode_page_vendor_specific_apple should be enabled for both scsi-hd
and scsi-cd devices to allow MacOS to format SCSI disk devices, and A/UX to
enumerate SCSI CDROM devices succesfully without getting stuck in a loop.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland f7c30a0f41 q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices
By default quirk_mode_sense_rom_use_dbd should be enabled for all scsi-cd devices
connected to the q800 machine to correctly report the CDROM block descriptor back
to A/UX.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland f358241029 q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices
By default quirk_mode_page_apple_vendor should be enabled for all scsi-cd devices
connected to the q800 machine to enable MacOS to detect and use them.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:57 +02:00
Jason A. Donenfeld a988465d0e m68k: virt: pass RNG seed via bootinfo block
This commit wires up bootinfo's RNG seed attribute so that Linux VMs can
have their RNG seeded from the earliest possible time in boot, just like
the "rng-seed" device tree property on those platforms. The link
contains the corresponding Linux patch.

Link: https://lore.kernel.org/lkml/20220626111509.330159-1-Jason@zx2c4.com/
Based-on: <20220625152318.120849-1-Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Message-Id: <20220626111804.330745-1-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-07-06 12:30:41 +02:00
Jason A. Donenfeld 23f0a6c80d m68k: use correct variable name in boot info string macro
Every time this macro is used, the caller is passing in
"parameters_base", so this bug wasn't spotted. But the actual macro
variable name is "base", so use that instead.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220625152318.120849-1-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-07-06 12:29:59 +02:00
Peter Maydell 9598c1bb39 ptimer: Rename PTIMER_POLICY_DEFAULT to PTIMER_POLICY_LEGACY
The traditional ptimer behaviour includes a collection of weird edge
case behaviours.  In 2016 we improved the ptimer implementation to
fix these and generally make the behaviour more flexible, with
ptimers opting in to the new behaviour by passing an appropriate set
of policy flags to ptimer_init().  For backwards-compatibility, we
defined PTIMER_POLICY_DEFAULT (which sets no flags) to give the old
weird behaviour.

This turns out to be a poor choice of name, because people writing
new devices which use ptimers are misled into thinking that the
default is probably a sensible choice of flags, when in fact it is
almost always not what you want.  Rename PTIMER_POLICY_DEFAULT to
PTIMER_POLICY_LEGACY and beef up the comment to more clearly say that
new devices should not be using it.

The code-change part of this commit was produced by
  sed -i -e 's/PTIMER_POLICY_DEFAULT/PTIMER_POLICY_LEGACY/g' $(git grep -l PTIMER_POLICY_DEFAULT)
with the exception of a test name string change in
tests/unit/ptimer-test.c which was added manually.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220516103058.162280-1-peter.maydell@linaro.org
2022-05-19 16:19:03 +01:00
Cornelia Huck 0ca703662e hw: Add compat machines for 7.1
Add 7.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220316145521.1224083-1-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-04-20 09:36:24 +02:00
Marc-André Lureau 0f9668e0c1 Remove qemu-common.h include from most units
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 14:31:55 +02:00
Markus Armbruster b21e238037 Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).

Patch created mechanically with:

    $ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
	     --macro-file scripts/cocci-macro-file.h FILES...

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
2022-03-21 15:44:44 +01:00
Mark Cave-Ayland b793b4ef8c mos6522: implement edge-triggering for CA1/2 and CB1/2 control line IRQs
The mos6522 datasheet describes how the control lines IRQs are edge-triggered
according to the configuration in the PCR register. Implement the logic according
to the datasheet so that the interrupt bits in IFR are latched when the edge is
detected, and cleared when reading portA/portB or writing to IFR as necessary.

To maintain bisectibility this change also updates the SCSI, SCSI data, Nubus
and VIA2 60Hz/1Hz clocks in the q800 machine to be negative edge-triggered as
confirmed by the PCR programming in all of Linux, NetBSD and MacOS.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:28:28 +00:00
Laurent Vivier e48b140eef m68k: virt: correctly set the initial PC
According to QEMU parameter, set initial PC to the entry of
the loaded kernel.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220115203725.3834712-4-laurent@vivier.eu>
2022-01-20 09:09:37 +01:00
Laurent Vivier 0969e00b39 q800: fix segfault with invalid MacROM
"qemu-system-m68k -M q800 -bios /dev/null" crashes with a segfault
in q800_init().
This happens because the code doesn't check that rom_ptr() returned
a non-NULL pointer .

To avoid NULL pointer, don't allow 0 sized file and use bios_size with
rom_ptr().

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/756
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220107105049.961489-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-09 12:03:21 +01:00
Laurent Vivier 214bdf8e71 hw: m68k: Add virt compat machine type for 7.0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211218114340.1856757-1-laurent@vivier.eu>
2022-01-09 12:02:53 +01:00
Richard Henderson 2b22e7540d m68k pull request 20211109
Add virt machine types for 6.1 and 6.2
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmGKWB8SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748lCcP/RlwTuI4TLP4LUzKgcw/+vCb+N0EYzhZ
 Fo8DHF+YOBs4bDyGcZiKxy7H1868Yp8Ri6uV38k8zaGwzhIJoxI7vEUyOBS8GSBu
 lE64u0M0zgkG2xiBsY/KRQwMnskvV5rN/nPCkkXT6EVLyOmM5O/fM3qhZgh7Eu2y
 Z8nwnMLKb9T0nRe+zdv2Ue3/S6ClzfLNiP4QkL7BhTzzNfSw2ibFN6cG9H5YLRpS
 f3lrO5a8qZisbD+frW0gz1IiET5eptISECZq7SuEQIK3brFlf27dMwMzx9nA0yY+
 jVPlKlMxLoMATBpvtez9tkTgY7Xd9DoPqKKzr04JfC2VkzGwZ/zXFF0J/0hnH0/Q
 jnuvT82dPK4fhXiygFLwXl76O85hD7RtGnOj2rhGIUwxvVCfuYwhT+rdIO+7kj9X
 0pIWPcnHQzZph4wIO+MlK3yslJvpf+nt+Xt6mvg9cCgXVYSFa5O9EtQBOjd+K15y
 +vG0ba4TZUkqMi9P8ZRem7zcEtjE78qHDYO0n+Cbu6XtR8zCmVamlw3sKrGBfuJ2
 2szv0s/r2Ww9Bd2YhYb+Nhpn5Ei24vTA0gc+O5mFbxLIc6pTP+1FeUFWuujBJORu
 B4slMBlQOnRnvcu172JYeNcmaA3sdOaqhrzkufZYUK+zmJA8ABZp0D42uZxW0s5e
 CG6lEmyzcmWO
 =vDhE
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-6.2-pull-request' of git://github.com/vivier/qemu-m68k into staging

m68k pull request 20211109

Add virt machine types for 6.1 and 6.2

# gpg: Signature made Tue 09 Nov 2021 12:14:39 PM CET
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]

* tag 'm68k-for-6.2-pull-request' of git://github.com/vivier/qemu-m68k:
  hw: m68k: virt: Add compat machine for 6.2
  hw: m68k: virt: Add compat machine for 6.1

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-09 13:16:56 +01:00
Laurent Vivier 6ed25621f2 hw: m68k: virt: Add compat machine for 6.2
Add the missing machine type for m68k/virt

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211106194158.4068596-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-11-09 12:14:18 +01:00
Laurent Vivier 6837f29976 hw: m68k: virt: Add compat machine for 6.1
Add the missing machine type for m68k/virt

Cc: qemu-stable@nongnu.org
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211106194158.4068596-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-11-09 12:14:07 +01:00
Philippe Mathieu-Daudé 65b4c8c759 hw/m68k: Fix typo in SPDX tag
Fix 'Identifer' -> 'Identifier' typo.

Cc: Laurent Vivier <laurent@vivier.eu>
Fixes: 8c6df16ff6 ("hw/char: add goldfish-tty")
Fixes: 8785559390 ("hw/intc: add goldfish-pic")
Fixes: 2fde99ee31 ("m68k: add an interrupt controller")
Fixes: 0791bc02b8 ("m68k: add a system controller")
Fixes: e1cecdca55 ("m68k: add Virtual M68k Machine")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211103105311.3399293-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-11-09 10:11:27 +01:00
Mark Cave-Ayland a56c12fb76 q800: drop 8-bit graphic_depth check for Apple 21 inch display
The graphic_depth check is no longer required since commit df8abbbadf ("macfb:
add common monitor modes supported by the MacOS toolbox ROM") which introduced
code in macfb_common_realize() to only allow the resolutions/depths provided in
macfb_mode_table to be specified for each display type.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: df8abbbadf ("macfb: add common monitor modes supported by the MacOS toolbox ROM")
Message-Id: <20211020141810.7875-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:25:04 +02:00
Mark Cave-Ayland 3ea74abe2d q800: add NMI handler
This allows the programmer's switch to be triggered via the monitor for debugging
purposes. Since the CPU level 7 interrupt is level-triggered, use a timer to hold
the NMI active for 100ms before releasing it again.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewied-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:18:40 +02:00
Mark Cave-Ayland c7710c1ebf q800: wire up remaining IRQs in classic mode
Explicitly wire up the remaining IRQs in classic mode to enable the use of
g_assert_not_reached() in the default case to detect any unexpected IRQs.

Add a comment explaining the IRQ routing differences in A/UX mode based
upon the comments in NetBSD (also noting that at least A/UX 3.0.1 still
uses classic mode).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:18:40 +02:00
Mark Cave-Ayland f7c6e12e24 q800: route SONIC on-board Ethernet IRQ via nubus IRQ 9 in classic mode
When the hardware is operating in classic mode the SONIC on-board Ethernet IRQ is
routed to nubus IRQ 9 instead of directly to the CPU at level 3. This does not
affect the framebuffer which although it exists in slot 9, has its own
dedicated IRQ on the Quadra 800 hardware.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:18:40 +02:00
Mark Cave-Ayland a85d18aabd q800: wire up auxmode GPIO to GLUE
This enables the GLUE logic to change its CPU level IRQ routing depending upon
whether the hardware has been configured for A/UX mode.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:18:40 +02:00
Mark Cave-Ayland 91ff5e4dcd q800: use GLUE IRQ numbers instead of IRQ level for GLUE IRQs
In order to allow dynamic routing of IRQs to different IRQ levels on the CPU
depending upon port B bit 6, use GLUE IRQ numbers and map them to the the
corresponding CPU IRQ level accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:18:40 +02:00
Mark Cave-Ayland 39950b16ec q800: move VIA1 IRQ from level 1 to level 6
On a Quadra 800 machine Linux sets via_alt_mapping to 1 and clears port B bit 6 to
ensure that the VIA1 IRQ is delivered at level 6 rather than level 1. Even though
QEMU doesn't yet emulate this behaviour, Linux still installs the VIA1 level 1 IRQ
handler regardless of the value of via_alt_mapping which is why the kernel has been
able to boot until now.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20 16:18:40 +02:00
Mark Cave-Ayland efd0c37edc q800: wire macfb IRQ to separate video interrupt on VIA2
Whilst the in-built Quadra 800 framebuffer exists within the Nubus address
space for slot 9, it has its own dedicated interrupt on VIA2. Force the
macfb device to occupy slot 9 in the q800 machine and wire its IRQ to the
separate video interrupt since this is what is expected by the MacOS
interrupt handler.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:03 +02:00
Mark Cave-Ayland df8abbbadf macfb: add common monitor modes supported by the MacOS toolbox ROM
The monitor modes table is found by experimenting with the Monitors Control
Panel in MacOS and analysing the reads/writes. From this it can be found that
the mode is controlled by writes to the DAFB_MODE_CTRL1 and DAFB_MODE_CTRL2
registers.

Implement the first block of DAFB registers as a register array including the
existing sense register, the newly discovered control registers above, and also
the DAFB_MODE_VADDR1 and DAFB_MODE_VADDR2 registers which are used by NetBSD to
determine the current video mode.

These experiments also show that the offset of the start of video RAM and the
stride can change depending upon the monitor mode, so update macfb_draw_graphic()
and both the BI_MAC_VADDR and BI_MAC_VROW bootinfo for the q800 machine
accordingly.

Finally update macfb_common_realize() so that only the resolution and depth
supported by the display type can be specified on the command line, and add an
error hint showing the list of supported resolutions and depths if the user tries
to specify an invalid display mode.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:03 +02:00
Mark Cave-Ayland 4317c51861 macfb: add qdev property to specify display type
Since the available resolutions and colour depths are determined by the attached
display type, add a qdev property to allow the display type to be specified.

The main resolutions of interest are high resolution 1152x870 with 8-bit colour
and SVGA resolution up to 800x600 with 24-bit colour so update the q800 machine
to allow high resolution mode if specified and otherwise fall back to SVGA.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-08 13:31:03 +02:00
Mark Cave-Ayland 5ef251416b q800: configure nubus available slots for Quadra 800
Slot 0x9 is reserved for use by the in-built framebuffer whilst only slots
0xc, 0xd and 0xe physically exist on the Quadra 800.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29 10:45:19 +02:00
Mark Cave-Ayland b297843ef5 q800: wire up nubus IRQs
Nubus IRQs are routed to the CPU through the VIA2 device so wire up the IRQs
using gpios accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29 10:45:19 +02:00
Mark Cave-Ayland d585d89de1 nubus-bridge: embed the NubusBus object directly within nubus-bridge
Since nubus-bridge is a container for NubusBus then it should be embedded
directly within the bridge device using qbus_create_inplace().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29 10:45:19 +02:00
Mark Cave-Ayland 1fa04232db nubus: move NubusBus from mac-nubus-bridge to nubus-bridge
Now that Nubus has its own address space rather than mapping directly into the
system bus, move the Nubus reference from MacNubusBridge to NubusBridge.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29 10:45:19 +02:00
Mark Cave-Ayland 62437f90cf nubus: move nubus to its own 32-bit address space
According to "Designing Cards and Drivers for the Macintosh Family" the Nubus
has its own 32-bit address space based upon physical slot addressing.

Move Nubus to its own 32-bit address space and then use memory region aliases
to map available slot and super slot ranges into the q800 system address
space via the Macintosh Nubus bridge.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210924073808.1041-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29 10:45:19 +02:00
Mark Cave-Ayland 323f984908 mac_via: remove explicit viaN prefix from VIA IRQ gpios
Now that q800 VIA1 and VIA2 are completely separate devices there is no need to
add a specific device prefix to ensure that the IRQ lines remain separate.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210830102447.10806-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08 15:37:40 +02:00
Mark Cave-Ayland 02a68a3e65 mac_via: remove mac_via device
Remove the mac_via device and wire up both q800 VIA1 and VIA2 directly for the
m68k q800 machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210830102447.10806-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08 15:37:40 +02:00
Mark Cave-Ayland 5f083d4224 mac_via: move ADB variables to MOS6522Q800VIA1State
The ADB is accessed using clock and data pins on q800 VIA1 port B and so can be
moved to MOS6522Q800VIA1State.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210830102447.10806-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08 15:37:40 +02:00
Mark Cave-Ayland 2f0e10a486 bitops.h: revert db1ffc32dd ("qemu/bitops.h: add bitrev8 implementation")
Commit db1ffc32dd ("qemu/bitops.h: add bitrev8 implementation") introduced
a bitrev8() function to reverse the bit ordering required for storing the
MAC address in the q800 PROM.

This function is not required since QEMU implements its own revbit8()
function which does exactly the same thing. Remove the extraneous
bitrev8() function and switch its only caller in hw/m68k/q800.c to
use revbit8() instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210725110557.3007-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-26 06:56:41 -10:00
Mark Cave-Ayland 846feac2ae hw/m68k/q800: fix PROM checksum and MAC address storage
The checksum used by MacOS to validate the PROM content is an exclusive-OR
rather than a sum over the corresponding bytes. In addition the MAC address
must be stored in bit-reversed format as indicated in comments in Linux's
macsonic.c.

With the PROM contents fixed MacOS starts to probe the device registers
when AppleTalk is enabled in the Control Panel.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-02 17:35:08 +02:00
Mark Cave-Ayland 408c57331c hw/m68k/q800: move PROM and checksum calculation from dp8393x device to board
This is in preparation for each board to have its own separate bit storage
format and checksum for storing the MAC address.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-02 17:35:08 +02:00
David Hildenbrand 7f863cba4d softmmu/memory: Pass ram_flags to memory_region_init_ram_shared_nomigrate()
Let's forward ram_flags instead, renaming
memory_region_init_ram_shared_nomigrate() into
memory_region_init_ram_flags_nomigrate().

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-6-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15 20:27:38 +02:00
Thomas Huth ee86213aa3 Do not include exec/address-spaces.h if it's not really necessary
Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth 2068cabd3f Do not include cpu.h if it's not really necessary
Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth 4c386f8064 Do not include sysemu/sysemu.h if it's not really necessary
Stop including sysemu/sysemu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Thomas Huth e924921f5c hw: Do not include hw/irq.h if it is not necessary
Many files include hw/irq.h without needing it. Remove the superfluous
include statements.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210327050236.2232347-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Thomas Huth e06054368c hw: Remove superfluous includes of hw/hw.h
The include/hw/hw.h header only has a prototype for hw_error(),
so it does not make sense to include this in files that do not
use this function.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210326151848.2217216-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Laurent Vivier e1cecdca55 m68k: add Virtual M68k Machine
The machine is based on Goldfish interfaces defined by Google
for Android simulator. It uses Goldfish-rtc (timer and RTC),
Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty).

The machine is created with 128 virtio-mmio bus, and they can
be used to use serial console, GPU, disk, NIC, HID, ...

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
2021-03-15 21:03:06 +01:00
Mark Cave-Ayland 84fbefedfe esp: rename existing ESP QOM type to SYSBUS_ESP
The existing ESP QOM type currently represents a sysbus device with an embedded
ESP state. Rename the type to SYSBUS_ESP accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-3-mark.cave-ayland@ilande.co.uk>
2021-03-07 10:39:05 +00:00
Laurent Vivier 382d71af7d m68k: import bootinfo headers from linux
Copy bootinfo.h and bootinfo-mac.h from arch/m68k/include/uapi/asm/
to include/standard-headers/asm-m68k/

Imported from linux v5.9 but didn't change since v4.14 (header update)
and since v4.10 (content update).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201220112615.933036-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-11 21:56:42 +01:00