Commit Graph

1159 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé 357088b1ed hw/net/xilinx_axienet: Rename StreamSlave as StreamSink
In order to use inclusive terminology, rename 'slave stream'
as 'sink stream'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200910070131.435543-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:04 -05:00
Philippe Mathieu-Daudé cfbef3f4eb hw/core/stream: Rename StreamSlave as StreamSink
In order to use inclusive terminology, rename 'slave stream'
as 'sink stream'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200910070131.435543-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:04 -05:00
Vikram Garhwal 98e5d7a2b7 hw/net/can: Introduce Xilinx ZynqMP CAN controller
The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.

Example for using single CAN:
    -object can-bus,id=canbus0 \
    -machine xlnx-zcu102.canbus0=canbus0 \
    -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0

Example for connecting both CAN to same virtual CAN on host machine:
    -object can-bus,id=canbus0 -object can-bus,id=canbus1 \
    -machine xlnx-zcu102.canbus0=canbus0 \
    -machine xlnx-zcu102.canbus1=canbus1 \
    -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \
    -object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1

To create virtual CAN on the host machine, please check the QEMU CAN docs:
https://github.com/qemu/qemu/blob/master/docs/can.txt

Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-2-git-send-email-fnu.vikram@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10 11:30:44 +00:00
Juan Quintela 21e8709b29 failover: Remove primary_dev member
Only three uses remained, and we can remove them on that case.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-28-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela 07a5d816d5 failover: simplify failover_unplug_primary
We can calculate device just once.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-27-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela 0e9a65c5b1 failover: Caller of this two functions already have primary_dev
Pass it as an argument.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-26-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela 3abad4a221 failover: We don't need to cache primary_device_id anymore
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-25-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela f5e1847ba5 failover: split failover_find_primary_device_id()
So we can calculate the device id when we need it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-24-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela 0a0a27d66b failover: remove failover_find_primary_device() error parameter
It can never give one error.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-23-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela fec037c1e2 failover: make sure that id always exist
We check that it exist at device creation time, so we don't have to
check anywhere else.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-22-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Juan Quintela 85d3b93196 failover: Rename to failover_find_primary_device()
This commit:
* Rename them to failover_find_primary_devices() so
  - it starts with failover_
  - it don't connect anything, just find the primary device
* Create documentation for the function

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-19-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 0763db4f2d failover: virtio_net_connect_failover_devices() does nothing
It just calls virtio_net_find_primary(), so just update the callers.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-18-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela b91ad981b8 failover: Rename function to hide_device()
You should not use pasive.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-17-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 89631fed27 failover: should_be_hidden() should take a bool
We didn't use at all the -1 value, and we don't really care.  It was
only used for the cases when this is not the device that we are
searching for.  And in that case we should not hide the device.

Once there, simplify virtio-Snet_primary_should_be_hidden.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-16-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 7cf05b7ed8 failover: simplify virtio_net_find_primary()
a - is_my_primary() never sets one error
b - If we return 1, primary_device_id is always set

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-15-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 7b3dc2f8c0 failover: Remove memory leak
Two things, at this point:

* n->primary_device_id has to be set, otherwise
  virtio_net_find_primary don't work.  So we have a leak here.

* it has to be exactly the same that prim_dev->id because what
  qdev_find_recursive() does is just compare this two values.

So remove the unneeded assignment and leaky bits.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-14-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 9673a88e97 failover: Remove primary_device_dict
It was only used once.  And we have there opts->id, so no need for it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-13-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 4f0303aed8 failover: remove standby_id variable
We can calculate it, and we only use it once anyways.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-12-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 19e49bc2e9 failover: Remove primary_device_opts
It was really only used once, in failover_add_primary().  Just search
for it on global opts when it is needed.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-11-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 518eda9fda failover: g_strcmp0() knows how to handle NULL
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-10-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela e2bde83e23 failover: Rename bool to failover_primary_hidden
You should not use passive naming variables.
And once there, be able to search for them.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-9-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 3d1c7a9782 failover: qdev_device_add() returns err or dev set
Never both.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-8-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 594d308b93 failover: Remove external partially_hotplugged property
It was only set "once", and with the wrong value. As far as I can see,
libvirt still don't use it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-7-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 82ceb65799 failover: Remove unused parameter
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-6-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 78274682b7 failover: primary bus is only used once, and where it is set
Just remove the struct member.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-5-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 587f2fcb93 failover: Use always atomics for primary_should_be_hidden
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-4-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Juan Quintela 1c775d65d4 failover: fix indentantion
Once there, remove not needed cast.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-3-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Mauro Matteo Cascella 915976bd98 hw/net/dp8393x: fix integer underflow in dp8393x_do_transmit_packets()
An integer underflow could occur during packet transmission due to 'tx_len' not
being updated if SONIC_TFC register is set to zero. Check for negative 'tx_len'
when removing existing FCS.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1899722
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-id: 20201124092445.658647-1-mcascell@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-01 10:34:08 +00:00
Prasad J Pandit c2cb511634 hw/net/e1000e: advance desc_offset in case of null descriptor
While receiving packets via e1000e_write_packet_to_guest() routine,
'desc_offset' is advanced only when RX descriptor is processed. And
RX descriptor is not processed if it has NULL buffer address.
This may lead to an infinite loop condition. Increament 'desc_offset'
to process next descriptor in the ring to avoid infinite loop.

Reported-by: Cheol-woo Myung <330cjfdn@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-24 10:40:17 +08:00
Chetan Pant 61f3c91a67 nomaintainer: Fix Lesser GPL version number
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15 17:04:40 +01:00
Chetan Pant 7cd2a9fad7 e1000e: Fix Lesser GPL version number
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124134.20083-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15 16:45:49 +01:00
Peter Maydell 71182187dd hw/net/can/ctucan_core: Use stl_le_p to write to tx_buffers
Instead of casting an address within a uint8_t array to a
uint32_t*, use stl_le_p(). This handles possibly misaligned
addresses which would otherwise crash on some hosts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-11 20:34:36 +08:00
Peter Maydell 676ea985c0 hw/net/can/ctucan_core: Handle big-endian hosts
The ctucan driver defines types for its registers which are a union
of a uint32_t with a struct with bitfields for the individual
fields within that register. This is a bad idea, because bitfields
aren't portable. The ctu_can_fd_regs.h header works around the
most glaring of the portability issues by defining the
fields in two different orders depending on the setting of the
__LITTLE_ENDIAN_BITFIELD define. However, in ctucan_core.h this
is unconditionally set to 1, which is wrong for big-endian hosts.

Set it only if HOST_WORDS_BIGENDIAN is not set. There is no need
for a "have we defined it already" guard, because the only place
that should set it is ctucan_core.h, which has the usual
double-inclusion guard.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-11 20:34:36 +08:00
Peter Maydell e0784d8375 hw/net/can/ctucan: Avoid unused value in ctucan_send_ready_buffers()
Coverity points out that in ctucan_send_ready_buffers() we
set buff_st_mask = 0xf << (i * 4) inside the loop, but then
we never use it before overwriting it later.

The only thing we use the mask for is as part of the code that is
inserting the new buff_st field into tx_status.  That is more
comprehensibly written using deposit32(), so do that and drop the
mask variable entirely.

We also update the buff_st local variable at multiple points
during this function, but nothing can ever see these
intermediate values, so just drop those, write the final
TXT_TOK as a fixed constant value, and collapse the only
remaining set/use of buff_st down into an extract32().

Fixes: Coverity CID 1432869
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-11 20:34:36 +08:00
Peter Maydell 5e73953a27 hw/net/can/ctucan: Don't allow guest to write off end of tx_buffer
The ctucan device has 4 CAN bus cores, each of which has a set of 20
32-bit registers for writing the transmitted data. The registers are
however not contiguous; each core's buffers is 0x100 bytes after
the last.

We got the checks on the address wrong in the ctucan_mem_write()
function:
 * the first "is addr in range at all" check allowed
   addr == CTUCAN_CORE_MEM_SIZE, which is actually the first
   byte off the end of the range
 * the decode of addresses into core-number plus offset in the
   tx buffer for that core failed to check that the offset was
   in range, so the guest could write off the end of the
   tx_buffer[] array

NB: currently the values of CTUCAN_CORE_MEM_SIZE, CTUCAN_CORE_TXBUF_NUM,
etc, make "buff_num >= CTUCAN_CORE_TXBUF_NUM" impossible, but we
retain this as a runtime check rather than an assertion to permit
those values to be changed in future (in hardware they are
configurable synthesis parameters).

Fix the top level check, and check the offset is within the buffer.

Fixes: Coverity CID 1432874
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-11 20:34:36 +08:00
Cindy Lu e87936ea29 virtio-net: Set mac address to hardware if the peer is vdpa
If the peer's type is vdpa, we need to set the mac address to hardware
in virtio_net_device_realize,

Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-11 16:52:23 +08:00
Elena Afanasova 2d154d2694 hw/net: move allocation to the heap due to very large stack frame
[dwg] The stack frame itself probably isn't that big a deal, but
avoiding alloca() is generally recommended these days.

Signed-off-by: Elena Afanasova <eafanasova@gmail.com>
Message-Id: <8f07132478469b35fb50a4706691e2b56b10a67b.camel@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-28 01:08:53 +11:00
Paolo Bonzini bb755ba47f qdev: add "check if address free" callback for buses
Check if an address is free on the bus before plugging in the
device.  This makes it possible to do the check without any
side effects, and to detect the problem early without having
to do it in the realize callback.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006123904.610658-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-12 11:50:50 -04:00
Markus Armbruster 2155ceaf25 error: Remove NULL checks on error_propagate() calls (again)
Patch created mechanically by rerunning:

    $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \
             --macro-file scripts/cocci-macro-file.h \
             --use-gitgrep .

Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-10-09 08:36:23 +02:00
Pavel Pisa 37aeb7a28d hw/net/can: Correct Kconfig dependencies
The original CAN_PCI config option enables multiple SJA1000 PCI boards
emulation build. These boards bridge SJA1000 into I/O or memory
address space of the host CPU and depend on SJA1000 emulation.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <dd332de687bfe52bbec37f5de1d861fb8e620d74.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:37 +02:00
Jan Charvat aa406e8b7e hw/net/can: CTU CAN FD IP open hardware core emulation.
The implementation of the model of complete open-source/design/hardware
CAN FD controller. The IP core project has been started and is maintained
by Ondrej Ille at Czech Technical University in Prague.

CTU CAN FD project pages:
	https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core

CAN bus CTU FEE Projects Listing page:
	http://canbus.pages.fel.cvut.cz/

The core is mapped to PCIe card same as on one of its real hardware
adaptations. The device implementing two CTU CAN FD ip cores
is instantiated after CAN bus definition

	-object can-bus,id=canbus0-bus

by QEMU parameters

	-device ctucan_pci,canbus0=canbus0-bus,canbus1=canbus0-bus

Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <23e3ca4dcb2cc9900991016910a6cab7686c0e31.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:37 +02:00
Jan Charvat 3c21c530a3 hw/net/can/ctucafd: Add CTU CAN FD core register definitions.
Definitions of registers and CAN FD frame message box of CTU CAN FD
IP core are generated the specification in CACTUS/IP-XACT format.

CTU CAN FD IP core repository

  https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core

The location of the CTU CAN IP core specification within
IP core design

  spec/CTU/ip/CAN_FD_IP_Core/2.1/CAN_FD_IP_Core.2.1.xml

The header files are generated by pyXact_generator designed
by Ondrej Ille which is based on ipyxact_parser.

The specification is source of header files for driver and emulation,
documentation and VHDL registers map implementation.

Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <97ae620f724bf1d76f127aaf628f7aec3af0a11c.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:37 +02:00
Jan Charvat 46b25fe08b hw/net/can: sja1000 ignore CAN FD frames
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-Id: <48d9ebf6b64e7652851c12fe4566e06b44803372.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:36 +02:00
Jan Charvat d44948ccbd net/can: Initial host SocketCan support for CAN FD.
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-Id: <41383d4eb3f35586c696a8e29c4dff4031a81338.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:36 +02:00
Stefan Hajnoczi d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Eduardo Habkost 8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Peter Maydell f00f57f344 This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
  - Allows 16-bit writes to the SiFive test device. This fixes the
    failure to reboot the RISC-V virt machine
  - Support for the Microchip PolarFire SoC and Icicle Kit
  - A reafactor of RISC-V code out of hw/riscv
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
 cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
 Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
 sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
 lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
 IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
 t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
 =07oA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
 - Fixes a bug in printing trap causes
 - Allows 16-bit writes to the SiFive test device. This fixes the
   failure to reboot the RISC-V virt machine
 - Support for the Microchip PolarFire SoC and Icicle Kit
 - A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
  hw/riscv: Sort the Kconfig options in alphabetical order
  hw/riscv: Drop CONFIG_SIFIVE
  hw/riscv: Always build riscv_hart.c
  hw/riscv: Move sifive_test model to hw/misc
  hw/riscv: Move sifive_uart model to hw/char
  hw/riscv: Move riscv_htif model to hw/char
  hw/riscv: Move sifive_plic model to hw/intc
  hw/riscv: Move sifive_clint model to hw/intc
  hw/riscv: Move sifive_gpio model to hw/gpio
  hw/riscv: Move sifive_u_otp model to hw/misc
  hw/riscv: Move sifive_u_prci model to hw/misc
  hw/riscv: Move sifive_e_prci model to hw/misc
  hw/riscv: sifive_u: Connect a DMA controller
  hw/riscv: clint: Avoid using hard-coded timebase frequency
  hw/riscv: microchip_pfsoc: Hook GPIO controllers
  hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
  hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
  hw/net: cadence_gem: Add a new 'phy-addr' property
  hw/riscv: microchip_pfsoc: Connect a DMA controller
  hw/dma: Add SiFive platform DMA controller emulation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/riscv/trace-events
2020-09-13 20:29:35 +01:00
Peter Maydell 842038f55c trivial patches pull request 20200911
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9b0MsSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748UH0QAIQYMn0U5eMWREg+DOEEj2n/6h04lTeE
 K93RsaQ9OsB0cZvwZ08sGoHI6FyfPR8S5yFe5as1ykGcGyO4vNwqxxPeRvqSfgwX
 2nkldYwgkOLYsjOD+1G16f/TGJ3MWbUxyn6ta/cSVg+BhbSvMHT3SXTLQ3PB7Lvf
 1j3Y3B0BUBAjPh1sNIvBkEV1ZGlV9tqu+XviUf4hfqZOVSTsSb7prtuGVYz9GsH2
 RxEcPXQKNWei2eQET4l8otcBpV3dz0D/6sap8nAP8pz0VARn7hJXIn5f8USFHHfg
 LMWbXrB9I2bjqSmRqhGofxhGMaH2uKQvpv46MyCDel7eMENNj6F+ER2a+7J8Apy8
 vVWYg8qVA85rfxQcb7nHuDrLQiD/C1o1uZcV1O/Mwkm7typUcpPn00pQLxhEDf9O
 xta1/EU8X+7kgTIKWMwpC0HwponOfHiG1TCyzbQ91FiTb/peeOzejTQi88YRNZFV
 NEg1XIo79Q/no05F/j3nrju2ESzBQTA1F+Jms8aI6Q40nXPaXEjg7IA510os7Py7
 uCEtoQ7qEM4lHfuSl67AR2J/NVWlWbZDsjqhxiMsYLR85rkARIf/7fsVIi9ELKOQ
 AYZdfA/LebovUcp9kDfYHPvDzifGMmv2ppD3mcZWhGuuQTJ06sRMPxQbUF6LBVMc
 64FEl8o3wFgv
 =/CqY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:32:27 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  target/i386/kvm: Add missing fallthrough comment
  util/hexdump: Reorder qemu_hexdump() arguments
  util/hexdump: Convert to take a void pointer argument
  hw/arm/pxa2xx: Add missing fallthrough comment
  target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken()
  test-vmstate: remove unnecessary code in match_interval_mapping_node
  hw: hyperv: vmbus: Fix 32bit compilation
  kconfig: fix comment referring to old Makefiles
  meson.build: tweak sdl-image error message
  hw/net/e1000e: Remove duplicated write handler for FLSWDATA register
  hw/net/e1000e: Remove overwritten read handler for STATUS register
  Makefile: Skip the meson subdir in cscope/TAGS/ctags
  Makefile: Drop extra phony cscope
  hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)
  hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
  hw/acpi/tco: Remove unused definitions
  hw/isa/isa-bus: Replace hw_error() by assert()
  hw/mips/fuloong2e: Convert pointless error message to an assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	net/colo-compare.c
2020-09-12 14:23:15 +01:00
Philippe Mathieu-Daudé b42581f5bb util/hexdump: Reorder qemu_hexdump() arguments
qemu_hexdump()'s pointer to the buffer and length of the
buffer are closely related arguments but are widely separated
in the argument list order (also, the format of <stdio.h>
function prototypes is usually to have the FILE* argument
coming first).

Reorder the arguments as "fp, prefix, buf, size" which is
more logical.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11 21:25:59 +02:00
Philippe Mathieu-Daudé 67263b33af util/hexdump: Convert to take a void pointer argument
Most uses of qemu_hexdump() do not take an array of char
as input, forcing use of cast. Since we can use this
helper to dump any kind of buffer, use a pointer to void
argument instead.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11 21:25:59 +02:00