We clamp down ram_size to match the sclp increment size. We do
not do the same for maxram_size, which means for large guests
with some sizes (e.g. -m 50000) maxram_size differs from ram_size.
This can break other code (e.g. CMMA migration) which uses maxram_size
to calculate the number of pages and then throws some errors.
Fixes: 82fab5c5b9 ("s390x/sclp: remove memory hotplug support")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
CC: David Hildenbrand <david@redhat.com>
Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
From an architecture point of view, nothing can be mapped into the address
space on s390x. All there is is memory. Therefore there is also not really
an interface to communicate such information to the guest. All we can do is
specify the maximum ram address and guests can probe in that range if
memory is available and usable (TPROT).
Also memory hotplug is strange. The guest can decide at some point in
time to add / remove memory in some range. While the hypervisor can deny
to online an increment, all increments have to be predefined and there is
no way of telling the guest about a newly "hotplugged" increment. So if we
specify right now e.g.
-m 2G,slots=2,maxmem=20G
An ordinary fedora guest will happily online (hotplug) all memory,
resulting in a guest consuming 20G. So it really behaves rather like
-m 22G
There is no way to hotplug memory from the outside like on other
architectures. This is of course bad for upper management layers.
As the guest can create/delete memory regions while it is running, of
course migration support is not available and tricky to implement.
With virtualization, it is different. We might want to map something
into guest address space (e.g. fake DAX devices) and not detect it
automatically as memory. So we really want to use the maxmem and slots
parameter just like on all other architectures. Such devices will have
to expose the applicable memory range themselves. To finally be able to
provide memory hotplug to guests, we will need a new paravirtualized
interface to do that (e.g. something into the direction of virtio-mem).
This implies, that maxmem cannot be used for s390x memory hotplug
anymore and has to go. This simplifies the code quite a bit.
As migration support is not working, this change cannot really break
migration as guests without slots and maxmem don't see the SCLP
features. Also, the ram size calculation does not change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180219174231.10874-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
[CH: tweaked patch description, as discussed on list]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Linux crashes right now if maxmem > mem is specified on the command line.
On s390x, the guest can hotplug memory itself right now - very weird -
and e.g. Fedora 27 will simply add all memory it can when booting.
So now, we have at least the same behavior on TCG and KVM.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171218224616.21030-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The highest cpu address is not the same as max_cpus. max_cpus
counts from 1 while the cpu address starts at 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <20171219082807.84494-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The "sclp" device is just an internal device that can not be instantiated
by the users. If they try to use it, they only get a simple error message:
$ qemu-system-s390x -nographic -device sclp
qemu-system-s390x: Option '-device s390-sclp-event-facility' cannot be
handled by this machine
Since sclp_init() tries to create a TYPE_SCLP_EVENT_FACILITY which is
a non-pluggable sysbus device, there is really no way that the "sclp"
device can be used by the user, so let's set the user_creatable = false
accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1507125199-22562-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is the first step to allow hot plugging of CPUs in a non-sequential
order. If a cpu is available ("plugged") can directly be decided by
looking at the cpu state pointer.
This makes sure, that really only cpus attached to the machine are
reported.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390-stattrib.c needs definition of TARGET_PAGE_SIZE, solve it via cpu.h.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed at that point.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we do not provide zpci, pci reconfiguration via sclp is not available
either. I/O adapter configuration, however, should always be present.
Rename the values that refer to I/O adapter configuration (instead of only
pci) to make things clearer.
Move length checking of the sccb for I/O adapter configuration into the
common sclp code (out of the pci code). This also fixes an issue that
the pci code would refer to a field in the sccb before checking whether
it was actually long enough.
Check for the adapter type in the sccb and return unrecognized adapter
type if the guest tries to issue I/O adapter configure/deconfigure for
a type other than pci or for pci if the zpci facility is not provided.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use the new functions memory_region_init_{ram,rom,rom_device}()
instead of manually calling the _nomigrate() version and then
vmstate_register_ram_global().
Patch automatically created using coccinelle script:
spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw
(As it turns out, there are no instances of the rom and
rom_device functions that are caught by this script.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
This patch removes redundant "qemu:" from error functions. The link to the bitesized task is:
http://wiki.qemu-project.org/Contribute/BiteSizedTasks#Error_checking
Signed-off-by: Ishani Chugh <chugh.ishani@research.iiit.ac.in>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
LOADPARM has two copies:
1. in SCP Information Block
2. in IPL Information Parameter Block
So, update SCLP intrinsics now. We always store LOADPARM in SCP
information block even if we don't have a valid IPL Information
Parameter Block.
Initial patch from Eugene (jno) Dvurechenski.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mha is provided in the CPU model, so get any CPU and extract the value.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-18-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we have a lowest ibc, we can indicate the ibc to the guest.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-17-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We have three different blocks in the SCLP read-SCP information response
that indicate sclp features. Let's prepare propagation.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-16-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's factor out the common code of "read cpu info" and "read scp
info". This will make the introduction of new cpu entry fields easier.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-14-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
With the current code a simple sclp command takes about 13000 ns
The biggest part seems to be the resolver of the object model. By
caching the sclp device the time for an sclp command goes down to
2500ns. Talking about real life scenarios, this change doubles
the speed of the sclp console when sending single bytes outputs
to /dev/console.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Split s390_sclp_configure() into separate functions for sclp
configuring and deconfiguring in order to make the code more readable.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org
The init of a device should have no side effects. Therefore move
registering of the event facility into the realize function, so
multiple instances of the SCLP device can be created e.g. for
introspection.
Add some more detail as to why we have to add it to the sysbus
at all.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's follow established naming practice here as well.
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-23-git-send-email-armbru@redhat.com>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
rnmax can be directly calculated using machine->maxram_size.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's calculate it once and reuse it.
Suggested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The restrictions for memory calculation belong to the sclp device.
Let's move the calculation to that point, so we are able to unify it for
both s390 machines. The sclp device is the first device to be initialized.
It performs the calculation and safely stores it in the machine, where
other parts of the system can access an reuse it.
The memory hotplug device is now only created when it is really needed.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If no memory hotplug device was created, the sclp command facility is
not exposed (SCLP_FC_ASSIGN_ATTACH_READ_STOR). We therefore have no
memory hotplug and should correctly report SCLP_RC_INVALID_SCLP_COMMAND
if any such command is executed.
This gets rid of these ugly asserts that could have been triggered
for the s390-virtio machine.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
ram_slots and maxram_size has already been parsed and verified by
common code for us.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's make that function a method of the new sclp device, keeping
the wrapper for existing users.
We can now let go of get_event_facility().
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the sclp_execute related functions into the SCLP class
and pass the device state as parameter, so we have easy access to
the SCLPDevice later on.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's create a root sclp device, which has other sclp devices as
children (e.g. the event facility for now) and can later be used
for migration of sclp specific attributes and setup of memory.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Commit 374f2981d1 ("memory: protect current_map by RCU") broke
unassignment of standby memory on s390x. Looks like that the new
parallelism allows races with our (semi broken) memory hotplug code. The
flatview_unref() can now be executed after our unparenting. Therefore
memory_region_unref() tries to unreference the MemoryRegion itself instead
of the parent.
In theory, MemoryRegions are now bound to separate devices that control
their lifetime. We don't have this yet, so we really want to control their
lifetime manually.
This patch fixes it temporarily, until we have a proper rework. The only
drawback is that they won't pop up in "info qom-tree", but that's better
than qemu crashes.
We have to release the reference to a memory region after a
memory_region_find, as it automatically takes a reference. As we're now
able to reassign memory, the MemoryRegion is in fact deleted (otherwise
vmstate_register_ram() would complain).
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Sort the sclp consoles into the input category, just as virtio-serial.
Various other sclp devices don't have an obvious category, sort them
into misc.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch implements a pci bus for s390x together with infrastructure
to generate and handle hotplug events, to configure/unconfigure via
sclp instruction, to do iommu translations and provide s390 support for
MSI/MSI-X notification processing.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add memory information to read SCP info and add handlers for
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add sclpMemoryHotplugDev to contain associated data structures, etc.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Code restructure in order to simplify class hierarchy
- remove S390SCLPDevice abstract base class
and move function pointers into new SCLPEventFacilityClass
- implement SCLPEventFacility as SysBusDevice
- use define constants for instance creation strings
The following ascii-art shows the class structure wrt the SCLP EventFacility
before (CURRENT) and after the restructure (NEW):
----
CURRENT:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacility | - to be replaced by new SCLPEventFacility,
|-------------------------| which will be a SysBusDevice
|SCLPEventsBus sbus |
|DeviceState *qdev |
|unsigned int receive_mask|
+-------------------------+
+-------------------------+
| S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass
|-------------------------|
|DeviceClass qdev |
|*(init)() |
+-------------------------+
"s390-sclp-event-facility"
|
instance-of
|
V
"s390-sclp-device" - this is an abstract class
+-------------------------+
| S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility
|-------------------------|
|SysBusDevice busdev |
|SCLPEventFacility *ef |
| |
|*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass
|*(event_pending)() |
+-------------------------+
----
NEW:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacilityClass |
|-------------------------|
|DeviceClass parent_class |
| |
|*(init)() |
|*(command_handler)() |
|*(event_pending)() |
+-------------------------+
"s390-sclp-event-facility"
+-------------------------+
| SCLPEventFacility |
|-------------------------|
|SysBusDevice parent_class|
|SCLPEventsBus sbus |
|unsigned int receive_mask|
+-------------------------+
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The pointer to the SCCB should not be limited to 32 bits only.
In contrast to this, the command word parameter is only 32 bits
(the upper 32 bits should be ignored).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implement the CPU data in SCLP "Read SCP Info". And implement "Read CPU Info"
SCLP command. This data will be used by the guest to get information about hot
plugged cpus.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Define new SCLP codes to improve code readability.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Done with this script:
cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`
This is so that paths remain valid as files are moved.
Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christian Borntraeger
Philippe Mathieu-Daudé
David Hildenbrand
Thomas Huth
Cornelia Huck
Peter Maydell
Stefan Hajnoczi
Ishani Chugh
Farhan Ali
Laurent Vivier
David Hildenbrand
Yi Min Zhao
Markus Armbruster
Cornelia Huck
Frank Blaschka
Hu Tao
Matthew Rosato
Heinz Graalfs
Thomas Huth
Jason J. Herne
Paolo Bonzini
Andreas Färber