blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests produce format-dependent output. Either the difference is
filtered out and ignored, or the test case is format-specific so we
don't need to worry about per-format output differences.
There is a third case: the test script is the same for all image formats
and the format-dependent output is relevant. An ugly workaround is to
copy-paste the test into multiple per-format test cases. This
duplicates code and is not maintainable.
This patch allows test cases to add per-format golden output files so a
single test case can work correctly when format-dependent output must be
checked:
123.out.qcow2
123.out.raw
123.out.vmdk
...
This naming scheme is not composable with 123.out.nocache or 123.pc.out,
two other scenarios where output files are split. I don't think it
matters since few test cases need these features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-9-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The measure subcommand calculates the size required by a new image file.
This can be used by users or management tools that need to allocate
space on an LVM volume, SAN LUN, etc before creating or converting an
image file.
Suggested-by: Maor Lipchuk <mlipchuk@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-8-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use qcow2_calc_prealloc_size() to get the required file size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-7-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image creation options parsed by qcow2_create() are also needed to
implement .bdrv_measure(). Extract the parsing code, including input
validation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-6-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The refcount metadata size calculation is inaccurate and can produce
numbers that are too small. This is bad because we should calculate a
conservative number - one that is guaranteed to be large enough.
This patch switches the approach to a fixed point calculation because
the existing equation is hard to solve when inaccuracies are taken care
of.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-5-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Calculating the preallocated image size will be needed to implement
.bdrv_measure(). Extract the code out into a separate function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-4-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Maximum size calculation is trivial for the raw format: it's just the
requested image size (because there is no metadata).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_measure() provides a conservative maximum for the size of a new
image. This information is handy if storage needs to be allocated (e.g.
a SAN or an LVM volume) ahead of time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-2-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A user may specify a relative path for accessing qemu, qemu-img, etc.
through environment variables ($QEMU_PROG and friends) or a symlink.
If a test decides to change its working directory, relative paths will
cease to work, however. Work around this by making all of the paths to
programs that should undergo testing absolute. Besides "realpath", we
also have to use "type -p" to support programs in $PATH.
As a side effect, this fixes specifying these programs as symlinks for
out-of-tree builds: Before, you would have to create two symlinks, one
in the build and one in the source tree (the first one for common.config
to find, the second one for the iotest to use). Now it is sufficient to
create one in the build tree because common.config will resolve it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for sha224, sha512, sha384 and ripemd160 hash
algorithms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default the PBKDF algorithm used with LUKS is tuned
based on the number of iterations to produce 1 second
of running time. This makes running the I/O test with
the LUKS format orders of magnitude slower than with
qcow2/raw formats.
When creating LUKS images, set the iteration time to
a 10ms to reduce the time overhead for LUKS, since
security does not matter in I/O tests.
Previously a full 'check -luks' would take
$ time ./check -luks
Passed all 22 tests
real 23m9.988s
user 21m46.223s
sys 0m22.841s
Now it takes
$ time ./check -luks
Passed all 22 tests
real 4m39.235s
user 3m29.590s
sys 0m24.234s
Still slow compared to qcow2/raw, but much improved
none the less.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the qemu-img dd command does accept --image-opts
this is not sufficient to make it work with the LUKS
image yet. This is because bdrv_create() still always
requires the non-image-opts syntax.
Thus we must skip 159/170 with luks for now
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We should release them here to reload on invalidate cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-31-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Remove persistent bitmap from the storage on block-dirty-bitmap-remove.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-30-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Interface for removing persistent bitmap from its storage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Optional. Default is false.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-25-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add optional 'persistent' flag to qmp command block-dirty-bitmap-add.
Default is false.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-24-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be needed to check some restrictions before making bitmap
persistent in qmp-block-dirty-bitmap-add (this functionality will be
added by future patch)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-22-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Store bitmaps and mark them read-only on reopening image as read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-21-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Store persistent dirty bitmaps in qcow2 image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-20-vsementsov@virtuozzo.com
[mreitz: Always assign ret in store_bitmap() in case of an error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-19-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
New field BdrvDirtyBitmap.persistent means, that bitmap should be saved
by format driver in .bdrv_close and .bdrv_inactivate. No format driver
supports it for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-18-vsementsov@virtuozzo.com
[mreitz: Fixed indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Release bitmaps after 'if (bs->drv) { ... }' block. This will allow
format driver to save persistent bitmaps, which will appear in following
commits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-17-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mirror AUTO flag from Qcow2 bitmap in BdrvDirtyBitmap. This will be
needed in future, to save this flag back to Qcow2 for persistent
bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-16-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add format driver handler, which should mark loaded read-only
bitmaps as 'IN_USE' in the image and unset read_only field in
corresponding BdrvDirtyBitmap's.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-14-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bs local variable to simplify code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-13-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Auto loading bitmaps are bitmaps in Qcow2, with the AUTO flag set. They
are loaded when the image is opened and become BdrvDirtyBitmaps for the
corresponding drive.
Extra data in bitmaps is not supported for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-12-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It will be needed in following commits for persistent bitmaps.
If bitmap is loaded from read-only storage (and we can't mark it
"in use" in this storage) corresponding BdrvDirtyBitmap should be
read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-10-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bitmap extension as specified in docs/specs/qcow2.txt.
For now, just mirror extension header into Qcow2 state and check
constraints. Also, calculate refcounts for qcow2 bitmaps, to not break
qemu-img check.
For now, disable image resize if it has bitmaps. It will be fixed later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is needed for the following patch, which will introduce refcounts
checking for qcow2 bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-8-vsementsov@virtuozzo.com
[mreitz: s/inc_refcounts/qcow2_inc_refcounts_imrt/ in one more (new)
place]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make getter signature const-correct. This allows other functions with
const dirty bitmap parameter use bdrv_dirty_bitmap_granularity().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628120530.31251-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test that hbitmap iter is resistant to bitmap resetting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make dirty iter resistant to resetting bits in corresponding HBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A bitmap directory entry is sometimes called a 'bitmap header'. This
patch leaves only one name - 'bitmap directory entry'. The name 'bitmap
header' creates misunderstandings with 'qcow2 header' and 'qcow2 bitmap
header extension' (which is extension of qcow2 header)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz
Stefan Hajnoczi
Eric Blake
Daniel P. Berrange
Vladimir Sementsov-Ogievskiy