Before computing flags we need to store the cc_op to memory. Move this
to gen_compute_eflags_c and gen_compute_eflags rather than doing it all
over the place.
Alo, after computing the flags in cpu_cc_src we are in EFLAGS mode.
Set s->cc_op and discard cpu_cc_dst in gen_compute_eflags, rather than
doing it all over the place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Discard CC_DST and set s->cc_op immediately after computing EFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always compute EFLAGS first since it is needed whenever
the shift is non-zero, i.e. most of the time. This makes it possible
to remove some writes of CC_OP_EFLAGS to cpu_cc_op and more importantly
removes cases where s->cc_op becomes CC_OP_DYNAMIC. Also, we can
remove cc_tmp and just modify cc_src from within the helper.
Finally, always follow gen_compute_eflags(cpu_cc_src) by setting s->cc_op
and discarding cpu_cc_dst.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This ensures the invariant that cpu_cc_op matches s->cc_op when calling
the helpers. The next patches need this because gen_compute_eflags and
gen_compute_eflags_c will take care of setting cpu_cc_op.
Always compute EFLAGS first since it is needed whenever the shift is
non-zero, i.e. most of the time. This makes it possible to remove some
writes of CC_OP_EFLAGS to cpu_cc_op and more importantly removes cases
where s->cc_op becomes CC_OP_DYNAMIC. These are slow and we want to
avoid them: CC_OP_EFLAGS is quite efficient once we paid the initial
cost of computing the flags.
Finally, always follow gen_compute_eflags(cpu_cc_src) by setting s->cc_op
and discarding cpu_cc_dst.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This ensures the invariant that cpu_cc_op matches s->cc_op when calling
the helpers. The next patches need this because gen_compute_eflags and
gen_compute_eflags_c will take care of setting cpu_cc_op.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As in the gen_repz_scas/gen_repz_cmps case, delay setting
CC_OP_DYNAMIC in gen_jcc until after code generation. All of
gen_jcc1/is_fast_jcc/gen_setcc_slow_T0 now work on s->cc_op, which makes
things a bit easier to follow and to patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Set it to the appropriate CC_OP_SUBx constant in gen_scas/gen_cmps.
In the repz case it can be overridden to CC_OP_DYNAMIC after generating
the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Introduce a function that abstracts extracting an 8, 16, 32 or 64-bit value
with or without sign, generalizing gen_extu and gen_exts.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
This patch implements Supervisor Mode Execution Prevention (SMEP) and
Supervisor Mode Access Prevention (SMAP) for x86. The purpose of the
patch, obviously, is to help kernel developers debug the support for
those features.
A fair bit of the code relates to the handling of CPUID features. The
CPUID code probably would get greatly simplified if all the feature
bit words were unified into a single vector object, but in the
interest of producing a minimal patch for SMEP/SMAP, and because I had
very limited time for this project, I followed the existing style.
[ v2: don't change the definition of the qemu64 CPU shorthand, since
that breaks loading old snapshots. Per Anthony Liguori this can be
fixed once the CPU feature set is snapshot.
Change the coding style slightly to conform to checkpatch.pl. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
> This instruction is always treated as a register-to-register (MOD = 11)
> instruction, regardless of the encoding of the MOD field in the MODR/M
> byte.
Also, Microport UNIX System V/386 v 2.1 (ca 1987) runs fine on
real Intel 386 and 486 CPU's (at least), but does not run in qemu without
this patch.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Rename remains of op_helper.c to seg_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make FPU helpers take a parameter for CPUState instead
of relying on global env.
Introduce temporary wrappers for FPU load and store ops. Remove
wrappers for non-AREG0 code. Don't call unconverted helpers
directly.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to the Intel manual
"Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3", "3.4.4 Segment Loading Instructions in IA-32e Mode":
"When in compatibility mode, FS and GS overrides operate as defined by
32-bit mode behavior regardless of the value loaded into the upper 32
linear-address bits of the hidden descriptor register base field.
Compatibility mode ignores the upper 32 bits when calculating an effective address."
However, the code misses the 64-bit mode case, where an instruction with
address and segment size override would be translated incorrectly. For example,
inc dword ptr gs:260h[ebx*4] gets incorrectly translated to:
(uint32_t)(gs.base + ebx * 4 + 0x260)
instead of
gs.base + (uint32_t)(ebx * 4 + 0x260)
Signed-off-by: Vitaly Chipounov <vitaly.chipounov@epfl.ch>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rephrase some of the expressions used to select an entry
in the SSE op table arrays so that it's clearer that they
don't overrun the op table array size.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The X86_64_DEF macro is a confusing way of making some terms
in a conditional only appear if TARGET_X86_64 is defined. We
only use it in two places, and in both cases this is for making
the same test, so abstract that check out into a function
where we can use a more conventional #ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 11f8cdb removed all the uses of the X86_64_ONLY
macro. The BUGGY_64() macro has been unused for a long time:
it originally marked some ops which couldn't be enabled
because of issues with the pre-TCG code generation scheme.
Remove the now-unnecessary definitions of both macros.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit c4baa0503d improved SSE table
type safety which now raises compiler errors when latest QEMU was
configured with --enable-debug.
Fix this by splitting the SSE tables even further to separate
helper functions with different signatures.
Instead of crashing by calling address 0, the code now jumps to
label illegal_op.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
SSE function tables could easily be corrupted because of use
of void pointers.
Introduce function pointer types and helper variables in order
to improve type safety.
Split sse_op_table3 according to types used.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().
Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc]
sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 2355c16e74 introduced a new ldmxcsr
helper taking an i32 argument, but the helper is actually passed a long.
Fix that by truncating the long to i32.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SSE rounding and flush to zero control has never been implemented. However
given that softfloat-native was using a single state for FPU and SSE and
given that glibc is setting both FPU and SSE state in fesetround(), this
was working correctly up to the switch to softfloat.
Fix that by adding an update_sse_status() function similar to
update_fpu_status(), and callin git on write to mxcsr.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the i386 cmpxchg instruction is executed with a memory operand
and the comparison result is "unequal", do the memory write before
changing the accumulator instead of the other way around, because
otherwise the new accumulator value will incorrectly be used in the
comparison when the instruction is restarted after a page fault.
This bug was originally reported on 2010-04-25 as
https://bugs.launchpad.net/qemu/+bug/569760
Signed-off-by: Andreas Gustafsson <gson@gson.org>
T0 was already masked to 16 bits when loading it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove also two assert statements which were the last remaining users.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The (x << (cl - 1)) quantity is only used if CL != 0. Move the
computation of that quantity nearer its use.
This avoids the creation of undefined TCG operations when the
constant propagation optimization proves that CL == 0, and thus
CL-1 is outside the range [0-wordsize).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: malc <av1474@comtv.ru>
While trying to use qemu -cpu pentium3 to test for incorrect uses of certain
SSE2 instructions, I found that QEMU allowed the mfence and lfence
instructions to be executed even though Pentium 3 doesn't support them.
According to the processor specs (and experience on a real Pentium 3), these
instructions are only available with SSE2, but QEMU is checking for SSE. The
check for the related sfence instruction is correct (it works with SSE).
This trival patch fixes the test.
Signed-off-by: Martin Simmons <martin@lispworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Richard Henderson
Paolo Bonzini
Peter Maydell
Evgeny Voevodin
Blue Swirl
malc
H. Peter Anvin
Matthew Ogilvie
Vitaly Chipounov
Stefan Weil
Andreas Färber
Aurelien Jarno
Andreas Gustafsson
Jan Kiszka
Stefan Weil
Martin Simmons