No functional changes. I verified that the generated binary
does not change in meaningful ways.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Glauber Costa <glommer@gmail.com>
* buf was too small for longer register names.
* Use consistent upper case for nouns in register names.
* Use better name for array with e100 register names.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should avoid truncating the register name when debugging.
Signed-off-by: David Benjamin <davidben@mit.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some devices did not have an initialisation value
for entry ".exit". This is fixed here.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Rename pxe-eepro100.bin to pxe-i82559er.bin.
The other devices supported by eepro100.c need
additional pxe boot ROM images.
* Call rom_add_option during initialisation.
The code won't work with two or more different
eepro100 devices, because it only adds one option
ROM, but this use case is perhaps never needed.
Using this patch, model=i82559er at least works partially.
For full support, more eepro100 patches are needed
(will follow later, can be fetched from ar7 branch
of QEMU).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add device properties (size of statistical data,
extended tcb support) to EEPRO100State and set
these values for the different devices.
* Fix PCI configuration for existing devices.
* Add initialisation code for missing devices.
* Remove function device_supports_eTxCB.
It is no longer needed.
* Fix dump of statistical data. It now respects
the real size of the statistical data.
An endianess issue was fixed here, too.
* CU_SHOWSTATS, CU_DUMPSTATS now write a
completion value after the statistical data.
There is no need to keep this value in
eepro100_stats_t, so member "complete"
could be removed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is preliminary for 64bit BAR.
Later pcibus_t will be changed from uint32_t to uint64_t.
Introduce FMT_PCIBUS for printf format for pcibus_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make constants for pci base address match pci_regs.h by
renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch only moves about 150 lines of code from
function eepro100_cu_command to a new function action_command.
A goto statement was replaced by a for loop.
There are no functional changes. Nor did I change comments
starting with // (they will be removed by future patches).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once upon the time when QEMU hacking was fun
there was a brave knight who wanted to have
a driver for a special intel nic.
So he started by cloning ne2000.c which also
meant that the new born eepro100.c was
immediately three years old.
Other knights who also wanted to have fun and
take their part in the battle thought that it
would be a good idea to remove stupid code
which says "missing nic load, missing nic save".
They saved everything they saw, man and women,
ne2000 code and runtime address offsets, and
put all saved elements in a prison called
vm data.
When the first knight came back and noticed
the unhappy prisoners, he wanted to set them
free. But the keepers of the keys told him
that they would have to stay there forever
for compatibility reasons.
So our brave knight now takes a new effort
to save the souls of the poor prisoners by
removing their names.
Their bodies will have to rot in the dungeons
of compatibility forever, watched by the
keepers of the keys.
Patchworks-ID: 35635
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is necessary to support OpenBSD 4.2 install, without
this change it triggers an assert.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is necessary to make FreeBSD recognize the device as 82557 - otherwise its
driver will use unsupported features and fail to work.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The idea of using assert() for input validation is rather questionable.
Let's remove it from eepro100, so that guests need to find more interesting
ways if they want to crash qemu.
This patch replaces asserts that are directly dependent on guest-accessible
data by other means of error handling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new devices added here are still not functional -
partially because some patches are still missing,
partially because I cannot test them. Nevertheless
they belong to the same family and will be supported
by this driver some day.
As soon as they work, they will also be added to hw/pci.c.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A lot of entries are unused (they were added by copy + paste
from other drivers during development of eepro100.c).
Removing them from nic_save, nic_load makes any
old saved status incompatible, so a new version
for the virtual machine data was needed, too.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Use TRACE macro to allow different logging flags.
* Add new debugging messages and clean existing ones.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Here's a patch to fix the issue introduced by me, as Reimar Döffinger pointed out,
Reimar Döffinger wrote:
> On Thu, Aug 13, 2009 at 03:01:20PM +0300, Naphtali Sprei wrote:
>> Bug fix for segfault when run as i82551 HW:
>> Use Extended TBD only when HW supports it (i82558 and up).
>>
>> Added assertions to guard from such buffer overflow
>> Introduce the MAX_TCB_BYTE_COUNT macro
>> Allocate buf big enough as HW needs (MAX_ETH_FRAME_SIZE -> MAX_TCB_BYTE_COUNT)
>>
>>
>> I don't feel 100% OK with the "s->device >= i82558B" condition
>> since it relies on the numeric (hex) value of those defines, which currently
>> is correct, but changes (which I don't forsee now) might break it.
>
> It seems this was applied. Unfortunately this breaks things on FreeBSD.
> There seem to be multiple issues.
> First, the intel document says the 82551, 82550, 82559 models are all
> supersets of the 82558. Or in other words: they all support this
> feature.
> Only the 82557 does not.
> But then even for that the FreeBSD driver will fail.
> The reason for that is this line:
> eeprom_contents[0xa] = 0x4000;
> the value here must be 0x01000 for all 82557 models it seems.
Correct the logic of determining devices that supports
extended TxCB: only the 82557 do not support it.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Use function pci_config_set_device_id
* Use new macro PCI_DEVICE_ID_INTEL_82557
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
eepro100.c shouldn't have the need to do this in its local header file.
And I recently started getting this:
$ make -j3
...
CC x86_64-softmmu/eepro100.o
/home/amit/src/qemu/hw/eepro100.c:112: error: two or more data types
in declaration specifiers
/home/amit/src/qemu/hw/eepro100.c:112: warning: useless type name in
empty declaration
make[1]: *** [eepro100.o] Error 1
so just remove the typedef and include <stdbool.h> instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once there, there is no way that we don't have a PCI Device at save/load time. Remove the check
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hello,
the real world issue is that the hardware allows sends up to 2600 bytes,
and for some reason FreeBSD sometimes sends frames larger than the
ethernet frame size (102+1460 is the maximum I have seen so far),
overflowing the on-stack tx buffer of the driver.
Independent of that, the code should avoid allowing the guest to
overwrite the stack.
This is a minimal patch to fix the issue (you could leave out the size
change of the buf array as well, networking still seems to work either
way). Obviously there are better ways to handle it, but a proper fix IMO
would involve first getting rid of the code duplication and given the
number of patches pending for that code I see no point in working on that now.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Bug fix for segfault when run as i82551 HW:
Use Extended TBD only when HW supports it (i82558 and up).
Added assertions to guard from such buffer overflow
Introduce the MAX_TCB_BYTE_COUNT macro
Allocate buf big enough as HW needs (MAX_ETH_FRAME_SIZE -> MAX_TCB_BYTE_COUNT)
I don't feel 100% OK with the "s->device >= i82558B" condition
since it relies on the numeric (hex) value of those defines, which currently
is correct, but changes (which I don't forsee now) might break it.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters. Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This function is used to manage a PCI BAR, so make the more generic
pci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VLANClientState's fd_read() handler doesn't read from file
descriptors, it adds a buffer to the client's receive queue.
Re-name the handlers to make things a little less confusing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This, apparently, is the style we prefer - all VLANClientState
should be an argument to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.
Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include assert.h from qemu-common.h and remove other direct uses.
cpu-all.h still need to include it because of the dyngen-exec.h hacks
Signed-off-by: Paul Brook <paul@codesourcery.com>