Commit Graph

48345 Commits

Author SHA1 Message Date
Alistair Francis 3e76099aac loader: Allow a custom AddressSpace when loading ROMs
When loading ROMs allow the caller to specify an AddressSpace to use for
the load.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 85f86b94ea94879e7ce8b12e85ac8de26658f7eb.1474331683.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Alistair Francis d6ac342a48 loader: Use the specified MemoryRegion
Prevously the specified MemoryRegion was ignored during the rom register
reset. This patch uses the rom MemoryRegion is avaliable.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d63fef5524deeb88e0068ca9d3fd4c8344f54dd4.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Alistair Francis 8cf6e9daca loader: Allow ELF loader to auto-detect the ELF arch
If the caller didn't specify an architecture for the ELF machine
the load_elf() function will auto detect it based on the ELF file.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: f2d70b47fcad31445f947f8817a0e146d80a046b.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis 1372fc0b87 xlnx-zynqmp: Set the number of priority queues
Set the ZynqMP number of priority queues to 2.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: e047c338ee981a61afd7f765a317b3de25a4f629.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis 77524d1157 cadence_gem: Correct indentation
Fix up the indentation inside the for loop that was introduced in the previous
patch. This commit is almost empty if viewed using 'git show -w', except for a
few changes that were required to avoid the 80 charecter line limit.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b40d1b12d24be9f0ac5d72f86249103e0c1c720a.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis 6710172501 cadence_gem: Add queue support
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 28921252217b1d14f16889bafa88675f5b7a66cb.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis e8e4994313 cadence_gem: Add support for screening
The Cadence GEM hardware allows incoming data to be 'screened' based on some
register values. Add support for these screens.

We also need to increase the max regs to avoid compilation failures. These new
registers are implemented in the next patch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 73e69a8ad9fa2763e9f68f71eaf2469dd5744fcc.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis 2bf57f73e3 cadence_gem: Add the num-priority-queues property
The Cadence GEM hardware supports N number priority queues, this patch is a
step towards that by adding the property to set the queues. At the moment
behaviour doesn't change as we only use queue 0.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 6543ec0d0c4bfd2678d0ed683efb197e91b17733.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis bcb39a65f1 cadence_gem: QOMify Cadence GEM
The sysbus_init_irq() call will eventually depend on a property so it needs to
be in the realize function.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 486595809cf416d18a750aafbcfa1c81d7160c59.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Dmitry Osipenko 5b262bb697 tests: Add ptimer tests
Ptimer is a generic countdown timer helper that is used by many timer
device models as well as by the QEMU core. Add QTests for the ptimer.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 1de89fe6e1ccaf6c8071ee3469e1a844df948359.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Dmitry Osipenko 2a8b58703e hw/ptimer: Suppress error messages under qtest
Under qtest ptimer emits lots of warning messages. The messages are caused
by the actual checking of the ptimer error conditions. Suppress those
messages, so they do not distract.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 44877fff4ff03205590698d3dc189ad6d091472f.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Dmitry Osipenko e7ea81c37d hw/ptimer: Introduce timer policy feature
Some of the timer devices may behave differently from what ptimer
provides. Introduce ptimer policy feature that allows ptimer users to
change default and wrong timer behaviour, for example to continuously
trigger periodic timer when load value is equal to "0".

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Dmitry Osipenko 780d23e54e hw/ptimer: Actually stop the timer in case of error
Running with counter / period = 0 is treated as a error case, printing error
message claiming that timer has been disabled. However, timer is only marked
as disabled, keeping to tick till expired and triggering after being claimed
as disabled. Stop the QEMU timer to avoid confusion.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 1e9bae4fae3c36430d7c28b0f486a0c71aff7eb3.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater de46f5f46c aspeed: allocate RAM after the memory controller has checked the size
If the RAM size is invalid, the memory controller will use a default
value.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-15-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater c6c7cfb01a aspeed: add a ram_size property to the memory controller
Configure the size of the RAM of the SOC using a property to propagate
the value down to the memory controller from the board level.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-14-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater b2fd45458d aspeed: use error_report instead of LOG_GUEST_ERROR
Also change the default value used in case of an error. The minimum
size is a bit severe, so let's just use an average RAM size.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1473438177-26079-13-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater 3755f9e316 aspeed: calculate the RAM size bits at realize time
There is no need to do this at each reset as the RAM size will not
change.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-12-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater 67077e3014 palmetto-bmc: remove extra no_sdcard assignement
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-11-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater 9a7c175011 arm: add support for an ast2500 evaluation board
The ast2500 eval board has a hardware strapping register value of
0xF100C2E6 which we use for a definition of AST2500_EVB_HW_STRAP1
below.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-10-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Cédric Le Goater 365aff1eaa aspeed: add a ast2500 SoC and support to the SCU and SDMC controllers
Based on previous work done by Andrew Jeffery <andrew@aj.id.au>.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-9-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater 8da33ef757 hw/misc: use macros to define hw-strap1 register on the AST2400 Aspeed SoC
This gives some explanation behind the magic number 0x120CE416.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-8-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater c3ba99f723 palmetto-bmc: add board specific configuration
aspeed_board_init() now uses a board identifier to customize some values
specific to the board.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater 74fb1f3807 palmetto-bmc: replace palmetto_bmc with aspeed
This is mostly a name replacement to prepare ground for other SoCs
specificities. It also adds a TypeInfo struct for the palmetto-bmc
board with a custom initialization for the same reason.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-6-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater aaf4e67f0e palmetto-bmc: rename the Aspeed board file to aspeed.c
We plan to add more Aspeed boards to this file. There are no changes
in the code.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater b033271f11 aspeed-soc: provide a framework to add new SoCs
Let's define an object class for each Aspeed SoC we support. A
AspeedSoCInfo struct gathers the SoC specifications which can later be
used by an instance of the class or by a board using the SoC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater ff90606f9a ast2400: replace ast2400 with aspeed_soc
This is a name replacement to prepare ground for other SoCs.

Let's also remove the AST2400_SMC_BASE definition from the address
space mappings, as it is not used. This controller was removed from
the Aspeed SoC AST2500, so this provides us a better common base for
the address space mapping on both SoCs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Cédric Le Goater 00442402ea ast2400: rename the Aspeed SoC files to aspeed_soc
Let's prepare for new Aspeed SoCs and rename the ast2400 file to a
more generic one. There are no changes in the code apart from the
header file include.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Andrey Yurovsky dcf578ed8c arm: add Cortex A7 CPU parameters
Add the "cortex-a7" CPU with features and registers matching the Cortex-A7
MPCore Technical Reference Manual and the Cortex-A7 Floating-Point Unit
Technical Reference Manual. The A7 is very similar to the A15.

Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473185229-4597-1-git-send-email-yurovsky@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
Peter Maydell 430da7a81d linux-user changes since 2.7 release
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV+PJ7bRIkN7ePJvAAQjvYRAAnX95B4PPTzCCImLUOsAWg/B6ImlZ1YFG
 d7SVCXyjbyCvoP4/tgHuajYUTHiIQ9H7mCyZXJWSkqO/h23TFrbtxofN0e+dWl1s
 t+Hot7y/WqRKnuZoXy+ww8Oc0uyEQYoPMlhaPz8CqNxnKPaihBVVWbWFn+yDp0k9
 DMfsEqUWQ+/kLkaMpOzInDbuZDAq8/36MUE/cw1+rFZ3MYYs9TSHwVxgXZjX89Cs
 d2xyNj8hxlQDfcG9rWWS7UrqzYqejD9j3cuvP7Q874aXdIPDIHkEbRGPVIPdYen7
 QaIJ0xOpryaOqRmGW5+sLkoQFDTo6FOOxGB0MsKOghSSdv8ET+W0+Y+hTC637FEO
 Eqj2OtrKvN/TlTRV6fDqfov5NXbM63N1rRQdondLUopSnGal7FBIkZL7WfSyYzif
 DTkLwtff3dNiOM7gLPC3tP9BTSdQuXvSXHeqDVHvtopQa04IwE3LD4DbBQdMj5BU
 MzmdVgwW2kkWej5BKlIrG3JzhKe6u2E/S3MPd3z6lJzERdaIgJIoZv1W2lJOSAaO
 aw0E1BOcQLMGSjdh2Gj+La3YVZeMqu2gMyqPS6vjd6UzyTfu8i1AR1bGtYeacZSz
 jEfFcMESo7WjpbsrA5V8ch5Hw95s0YU3qhsG3AsDjj9ChE9QKj7v3wYJY2l9Fi4t
 UY3zOajB0eY=
 =w4/p
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160915' into staging

linux-user changes since 2.7 release

# gpg: Signature made Thu 22 Sep 2016 13:09:17 BST
# gpg:                using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581  41EF B448 90DE DE3C 9BC0

* remotes/riku/tags/pull-linux-user-20160915: (26 commits)
  linux-user: fix TARGET_NR_select
  linux-user: Fix incorrect offset of tuc_stack in ARM do_sigframe_return_v2
  linux-user: Sanity check clone flags
  linux-user: Remove unnecessary nptl_flags variable from do_fork()
  linux-user: Implement force_sigsegv() via force_sig()
  linux-user: SIGSEGV from sigreturn need not be fatal
  linux-user: ARM: Give SIGSEGV if signal frame setup fails
  linux-user: SIGSEGV on signal entry need not be fatal
  linux-user: Pass si_type information to queue_signal() explicitly
  linux-user: Recheck for pending synchronous signals too
  linux-user: ppc64: set MSR_CM bit for BookE 2.06 MMU
  linux-user: Use correct target SHMLBA in shmat()
  linux-user: Use glib malloc functions in load_symbols()
  linux-user: Check dump_write() return in elf_core_dump()
  linux-user: Fix error handling in flatload.c target_pread()
  linux-user: Fix incorrect use of host errno in do_ioctl_dm()
  linux-user: Check lock_user() return value for NULL
  linux-user: Pass missing MAP_ANONYMOUS to target_mmap() call
  linux-user: report signals being taken in strace output
  linux-user: Range check the nfds argument to ppoll syscall
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 15:39:54 +01:00
Peter Maydell 3648100e2a seccomp branch queue
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX4lMhAAoJEP0M/1sS+L0vHPIIAKfe0G8DVFLHE3x9j2EpmAex
 1gqL0Y8hHO9VPjY3Q7vtgUAtGt007BuL6fBgUVT389JjSNK1kAJWE0xImA9T+qcn
 sIpO5zckFgKofjFZ9EofCvycgzFjEJ1M1oZd/8uavYGsI0pioo2iUYuhvQz+zZqb
 XZBfFTTS7aVjvtiTYcQKdtaZKqJ7m0IAc0O6rFJE7HVr9KkLoDHJiB0FxedyTNPs
 gwR+36S4lpXjLk5h4AGNakmaQSQ7NxZp6wRxJ+ZJ585XBLjjiSqQ2Jhf2eMHfvLv
 oLioKSVSrUzeuN1GloD+Bjb2tSOOl0sCr6hVnZLsJETR7Kr/erhQBaZzd0rKxIg=
 =MOm5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20160921' into staging

seccomp branch queue

# gpg: Signature made Wed 21 Sep 2016 10:30:09 BST
# gpg:                using RSA key 0xFD0CFF5B12F8BD2F
# gpg: Good signature from "Eduardo Otubo (Software Engineer @ ProfitBricks) <eduardo.otubo@profitbricks.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C96 46B6 E1D1 C38A F2EC  3FDE FD0C FF5B 12F8 BD2F

* remotes/otubo/tags/pull-seccomp-20160921:
  seccomp: adding getrusage to the whitelist

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 13:18:29 +01:00
Peter Maydell ffd455ae41 Block patches for 2.8
-----BEGIN PGP SIGNATURE-----
 
 iQEvBAABCAAZBQJX4ZxBEhxtcmVpdHpAcmVkaGF0LmNvbQAKCRD0B9sAYdXPQAW7
 CACiTqooe3QwyBigm4aOFeK0tELz6osng35k9fBycxMCjJKzt/8d/InN7SeN1XPV
 YJm7TSoienqHTJgGPvrl6k2gnRD6uy0ECyu6AYqvTDV0vEimFetTnT3511+eYFNk
 2f65mnvH1C6zgntRN8TzfyO+viWUuC9nG831jzIS7mIDeh8K+S4NhaGx8K5IHWb0
 1Hl1HOoPr9qbZcNbcEmg0My/9iOpAuDuVVf0kGIqUy0JOyFlJO7BHv5flVE5SPRf
 E1eC1h6fbpak1nXkZDr0BfyW7VY5ouwnvOa7it0lb5RWcSvWnFpV0dS/9F826UHZ
 MSstX5Fw8U5MQac4O/eY6fCo
 =tEbN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2016-09-20' into staging

Block patches for 2.8

# gpg: Signature made Tue 20 Sep 2016 21:29:53 BST
# gpg:                using RSA key 0xF407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2016-09-20:
  iotest 055: refactor and speed up
  commit: get the overlay node before manipulating the backing chain
  blockdev: Modularize nfs block driver
  blockdev: Add dynamic module loading for block drivers
  blockdev: Add dynamic generation of module_block.h
  blockdev: prepare iSCSI block driver for dynamic loading
  qemu-img: add skip option to dd
  qemu-img: add the 'dd' subcommand

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 12:16:51 +01:00
Peter Maydell b98bbea2d9 tcg updates for 20 Sep
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJX4YRkAAoJEK0ScMxN0Cebdt8H/A8t8mIXp6OcRDcewVzIPEyn
 iF+yHj/6Ejp5+B8N/NfnSfko27/J40jy5IodO74jZmof1YUXZW1uU3vcT8VGd72R
 3526ZvenJBZ+CcF5uUYdST0f3qbobdya0flpgsa7dtLGGq6dGUtJnAxgRzTraBD1
 Hqh37NusD5x+T8GhFo9Oc9mgbuV022wrHW9QeWuR0i34JXsjSJjK9EnEiCgUcr2C
 fwNbPPe2znLjPWHazeUT6p7d7NDdOsdwzFFT788I0yZ3Pvn4eUxs4ff0/D+oPHHU
 liPq/f/FztqnUL6YIzN5kdCRTZ4dvG+LZGmpSx46oA29S3hVtKABU/pcxxIqjNY=
 =xS7N
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20160920' into staging

tcg updates for 20 Sep

# gpg: Signature made Tue 20 Sep 2016 19:48:04 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tcg-20160920:
  tcg/i386: Extend TARGET_PAGE_MASK to the proper type

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 10:10:06 +01:00
Laurent Vivier 5457dc9e37 linux-user: fix TARGET_NR_select
TARGET_NR_select can have three different implementations:

  1- to always return -ENOSYS

     microblaze, ppc, ppc64

     -> TARGET_WANT_NI_OLD_SELECT

  2- to take parameters from a structure pointed by arg1
    (kernel sys_old_select)

     i386, arm, m68k

     -> TARGET_WANT_OLD_SYS_SELECT

  3- to take parameters from arg[1-5]
     (kernel sys_select)

     x86_64, alpha, s390x,
     cris, sparc, sparc64

Some (new) architectures don't define NR_select,

  4- but only NR__newselect with sys_select:

      mips, mips64, sh

  5- don't define NR__newselect, and use pselect6 syscall:

      aarch64, openrisc, tilegx, unicore32

Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-22 07:24:21 +03:00
Timothy E Baldwin 45eafb4d32 linux-user: Fix incorrect offset of tuc_stack in ARM do_sigframe_return_v2
struct target_ucontext_v2 is not at the begining of the signal frame,
therefore do_sigaltstack was being passed bogus arguments.

As the offset depends on the type of signal frame fixed by passing in the
beginning of the context from do_sigreturn_v2 and do_rt_sigreturn_v2.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:17:02 +03:00
Peter Maydell 5ea2fc84da linux-user: Sanity check clone flags
We currently make no checks on the flags passed to the clone syscall,
which means we will not fail clone attempts which ask for features
that we can't implement. Add sanity checking of the flags to clone
(which we were already doing in the "this is a fork" path, but not
for the "this is a new thread" path), tidy up the checking in
the fork path to match it, and check that the fork case isn't trying
to specify a custom termination signal.

This is helpful in causing some LTP test cases to fail cleanly
rather than behaving bizarrely when we let the clone succeed
but didn't provide the semantics requested by the flags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:14:27 +03:00
Peter Maydell 7cfbd386b9 linux-user: Remove unnecessary nptl_flags variable from do_fork()
The 'nptl_flags' variable in do_fork() is set to a copy of
'flags', and then the CLONE_NPTL_FLAGS are cleared out of 'flags'.
However the only effect of this is that the later check on
"if (flags & CLONE_PARENT_SETTID)" is never true. Since we
will already have done the setting of parent_tidptr in clone_func()
in the child thread, we don't need to do it again.

Delete the dead if() and the clearing of CLONE_NPTL_FLAGS from
'flags', and then use 'flags' where we were previously using
'nptl_flags', so we can delete the unnecessary variable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:14:18 +03:00
Peter Maydell c4b3574402 linux-user: Implement force_sigsegv() via force_sig()
Now that we have a force_sig() with the semantics we need,
we can implement force_sigsegv() to call it rather than
open-coding the call to queue_signal().

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:01:45 +03:00
Peter Maydell c599d4d6d6 linux-user: SIGSEGV from sigreturn need not be fatal
If the sigreturn syscall fails to read memory then this causes a
SIGSEGV, but this is not necessarily a fatal signal -- the guest
process can catch it.

We don't implement this correctly because the behaviour of QEMU's
force_sig() function has drifted away from the kernel function of the
same name -- ours now does "always do a guest core dump and abort
execution", whereas the kernel version simply forces the guest to
take a signal, which may or may not eventually cause a core dump.

Rename our force_sig() to dump_core_and_abort(), and provide a
force_sig() which acts more like the kernel version as the sigreturn
implementations expect it to.  Since force_sig() now returns, we must
update all the callsites to return -TARGET_QEMU_ESIGRETURN so that
the main loop doesn't change the guest registers before the signal
handler is invoked.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:01:45 +03:00
Peter Maydell 28298c912e linux-user: ARM: Give SIGSEGV if signal frame setup fails
The 32-bit ARM signal frame setup code was just bailing out
on error returns from lock_user_struct calls, without
generating the SIGSEGV that should happen here. Wire up
error return codes to call force_sigsegv().

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:01:45 +03:00
Peter Maydell 0939166997 linux-user: SIGSEGV on signal entry need not be fatal
A failed write to memory trying to set up the signal frame
should trigger a SIGSEGV, but this need not be fatal: the
guest has a chance to catch it. Implement this via a force_sigsegv()
function with the same behaviour as the kernel function of that
name: make sure that we don't try to re-take a failed SIGSEGV,
and force a synchronous signal.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:01:45 +03:00
Peter Maydell 9d2803f720 linux-user: Pass si_type information to queue_signal() explicitly
Instead of assuming in queue_signal() that all callers are passing
a siginfo structure which uses the _sifields._sigfault part of the
union (and thus a si_type of QEMU_SI_FAULT), make callers pass
the si_type they require in as an argument.

[RV adjusted to apply]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:01:28 +03:00
Peter Maydell 8bd3773cce linux-user: Recheck for pending synchronous signals too
In process_pending_signals() we restart the scan of possible
pending signals after calling handle_pending_signal() in
case some other signal has been generated. This rescan
should also include a check for a new synchronous signal
since those are in fact the only kind of new signal that
the signal frame setup process might produce.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 21:51:49 +03:00
Michael Walle c836112997 linux-user: ppc64: set MSR_CM bit for BookE 2.06 MMU
64 bit user mode doesn't work for the e5500 core because the MSR_CM bit is
not set which enables the 64 bit mode for this MMU model. Memory addresses
are truncated to 32 bit, which results in "Invalid data memory access"
error messages. Fix it by setting the MSR_CM bit for this MMU model.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 21:42:11 +03:00
Peter Maydell ee8e76141b linux-user: Use correct target SHMLBA in shmat()
The shmat() handling needs to do target-specific handling
of the attach address for shmat():
 * if the SHM_RND flag is passed, the address is rounded
   down to a SHMLBA boundary
 * if SHM_RND is not passed, then the call is failed EINVAL
   if the address is not a multiple of SHMLBA

Since SHMLBA is target-specific, we need to do this
checking and rounding in QEMU and can't leave it up to the
host syscall.

Allow targets to define TARGET_FORCE_SHMLBA and provide
a target_shmlba() function if appropriate, and update
do_shmat() to honour them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:28:52 +03:00
Peter Maydell 0ef9ea290e linux-user: Use glib malloc functions in load_symbols()
Switch to using the glib malloc functions in load_symbols();
this deals with a Coverity complaint about possible
integer overflow calculating the allocation size with
'nsyms * sizeof(*syms)'.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:28:20 +03:00
Peter Maydell 772034b63e linux-user: Check dump_write() return in elf_core_dump()
One of the calls to dump_write() in elf_core_dump() was missing
a check for failure (spotted by Coverity). Add the check to
bring it into line with the other calls from this function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:28:03 +03:00
Peter Maydell e5a869ed56 linux-user: Fix error handling in flatload.c target_pread()
The flatload.c target_pread() function is supposed to return
0 on success or negative host errnos; however it wasn't
checking lock_user() for failure or returning the errno from
the pread() call. Fix these problems (the first of which is
noted by Coverity).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:27:19 +03:00
Peter Maydell f9757b1d96 linux-user: Fix incorrect use of host errno in do_ioctl_dm()
do_ioctl_dm() should return target errno values, not host ones;
correct an accidental use of a host errno in an error path.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:27:07 +03:00
Peter Maydell 3211215e74 linux-user: Check lock_user() return value for NULL
lock_user() can return NULL, which typically means the syscall
should fail with EFAULT. Add checks in various places where
Coverity spotted that we were missing them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:26:46 +03:00
Peter Maydell 68754b442b linux-user: Pass missing MAP_ANONYMOUS to target_mmap() call
A target_mmap() call in load_elf_binary() was missing the MAP_ANONYMOUS
flag. (Spotted by Coverity, because target_mmap() will try to use
-1 as the filedescriptor in this case.)

This has never been noticed because the code in question is for
handling ancient SVr4 iBCS2 binaries.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:26:23 +03:00