According to msdn documentation and Linux man pages, send() should try
to send as much as possible in blocking mode, while recv() may return
earlier with a smaller available amount, we should try to continue
send/recv from there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-3-marcandre.lureau@redhat.com>
With a pipe or other reasons, read/write may return less than the
requested bytes. This happens with the test-io-channel-command test on
Windows. glib spawn code uses a binary pipe of 4096 bytes, and the first
read returns that much (although more are requested), for some unclear
reason...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-2-marcandre.lureau@redhat.com>
As described in:
https://learn.microsoft.com/en-us/visualstudio/debugger/how-to-set-a-thread-name-in-native-code?view=vs-2022
SetThreadDescription() is available since Windows 10, version 1607 and
in some versions only by "Run Time Dynamic Linking". Its declaration is
not yet in mingw, so we lookup the function the same way glib does.
Tested with Visual Studio Community 2022 debugger.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commit 730fe750fb.
Unconditionally building all the bios for all arches was a little too
far too fast.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221011113417.794841-4-alex.bennee@linaro.org>
Rewrite get_next_page() to work over non-aligned blocks. When it
encounters non aligned addresses, it will try to fill a page provided by
the caller.
This solves a kdump crash with "tpm-crb-cmd" RAM memory region,
qemu-kvm: ../dump/dump.c:1162: _Bool get_next_page(GuestPhysBlock **,
uint64_t *, uint8_t **, DumpState *): Assertion `(block->target_start &
~target_page_mask) == 0' failed.
because:
guest_phys_block_add_section: target_start=00000000fed40080 target_end=00000000fed41000: added (count: 4)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=2120480
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
This should be functionally equivalent, but slightly easier to read,
with simplified paths and checks at the end of the function.
The following patch is a major rewrite to get rid of the assert().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
The functions in question do not actually write to the file descriptor
they set up a buffer which is later written to the fd.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-9-frankja@linux.ibm.com>
Let's split the write from the modification of the elf header so we
can consolidate the write of the data in one function.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-8-frankja@linux.ibm.com>
dump_calculate_size() sums up all the sizes of the guest memory
blocks. Since we already have a function that calculates the size of a
single memory block (dump_get_memblock_size()) we can simply iterate
over the blocks and use the function instead of calculating the size
ourselves.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220811121111.9878-7-frankja@linux.ibm.com>
While the DumpState begin and length variables directly mirror the API
variable names they are not very descriptive. So let's add a
"filter_area_" prefix and make has_filter a function checking length > 0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-6-frankja@linux.ibm.com>
get_start_block() returns the start address of the first memory block
or -1.
With the GuestPhysBlock iterator conversion we don't need to set the
start address and can therefore remove that code and the "start"
DumpState struct member. The only functionality left is the validation
of the start block so it only makes sense to re-name the function to
validate_start_block()
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220811121111.9878-5-frankja@linux.ibm.com>
The iteration over the memblocks in dump_iterate() is hard to
understand so it's about time to clean it up. Instead of manually
grabbing the next memblock we can use QTAILQ_FOREACH to iterate over
all memblocks.
Additionally we move the calculation of the offset and length out by
introducing and using the dump_filter_memblock_*() functions. These
functions will later be used to cleanup other parts of dump.c.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-4-frankja@linux.ibm.com>
Let's make it a bit clearer that we write the program headers of the
PT_LOAD type.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@ibm.linux.com>
Message-Id: <20220811121111.9878-3-frankja@linux.ibm.com>
It's always better to convey the type of a pointer if at all
possible. So let's add the DumpState typedef to typedefs.h and move
the dump note functions from the opaque pointers to DumpState
pointers.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Cédric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Alistair Francis <alistair.francis@wdc.com>
CC: Bin Meng <bin.meng@windriver.com>
CC: Cornelia Huck <cohuck@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Richard Henderson <richard.henderson@linaro.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-2-frankja@linux.ibm.com>
- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
=1vZ4
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu into staging
testing, gdbstub, plugin and gitdm updates
- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
# KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
# 918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
# TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
# b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
# tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
# 0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
# =1vZ4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Oct 2022 06:54:30 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu: (52 commits)
plugins: add [pre|post]fork helpers to linux-user
contrib/gitdm: add Université Grenoble Alpes
contrib/gitdm: add Simon to individual contributors
contrib/gitdm: add China Telecom to the domain map
contrib/gitdm: add ISCAS to the academics group
contrib/gitdm: add WANG Xuerui to individual contributers
contrib/gitdm: add Paul to individual contributors
contrib/gitdm: add mapping for Loongson Technology
accel/kvm: move kvm_update_guest_debug to inline stub
gdbstub: move guest debug support check to ops
gdbstub: move breakpoint logic to accel ops
gdbstub: move sstep flags probing into AccelClass
gdbstub: move into its own sub directory
semihosting: update link to spec
docs/devel: document the test plugins
contrib/plugins: reset skip when matching in execlog
docs/devel: move API to end of tcg-plugins.rst
docs/devel: clean-up qemu invocations in tcg-plugins
plugins: Assert mmu_idx in range before use in qemu_plugin_get_hwaddr
plugins: extend execlog to filter matches
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
again to the academic group map.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220926134609.3301945-7-alex.bennee@linaro.org>
Please confirm this is the correct mapping for you.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Simon Safar <simon@simonsafar.com>
Message-Id: <20220926134609.3301945-2-alex.bennee@linaro.org>
The English website (http://english.is.cas.cn/) in on a slightly
different domain but has the same logo as http://www.iscas.ac.cn/.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20220929114231.583801-51-alex.bennee@linaro.org>
His blog confirms he is not affiliated with Loongson.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220929114231.583801-50-alex.bennee@linaro.org>
Also map his old codesourcery address to his canonical address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paul Brook <paul@nowt.org>
Message-Id: <20220929114231.583801-49-alex.bennee@linaro.org>
Please confirm you are happy with this mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220929114231.583801-48-alex.bennee@linaro.org>
This removes the final hard coding of kvm_enabled() in gdbstub and
moves the check to an AccelOps.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-46-alex.bennee@linaro.org>
As HW virtualization requires specific support to handle breakpoints
lets push out special casing out of the core gdbstub code and into
AccelOpsClass. This will make it easier to add other accelerator
support and reduces some of the stub shenanigans.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-45-alex.bennee@linaro.org>
The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
This is in preparation of future refactoring as well as cleaning up
the source tree. Aside from the minor tweaks to meson and trace.h this
is pure code motion.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-43-alex.bennee@linaro.org>
The old link has moved but it seems the document is now hosted on
Arm's github along with a license update to CC-BY-SA-4.0.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-42-alex.bennee@linaro.org>
Although the test plugins are fairly basic they are still useful for
some things so we should document their existence.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-41-alex.bennee@linaro.org>
The purpose of the matches was to only track the execution of
instructions we care about. Without resetting skip to the value at the
start of the block we end up dumping all instructions after the match
with the consequent load on the instrumentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-40-alex.bennee@linaro.org>
The API documentation is quite dry and doesn't flow nicely with the
rest of the document. Move it to its own section at the bottom along
with a little leader text to remind people to update it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-39-alex.bennee@linaro.org>
We currently have the final binaries in the root of the build dir so
the build prefix is superfluous. Additionally add a shell prompt to be
more in line with the rest of the code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-38-alex.bennee@linaro.org>
Coverity reports out-of-bound accesses here. This should be a
false positive due to how the index is decoded from MemOpIdx.
Fixes: Coverity CID 1487201
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20220401190233.329360-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-37-alex.bennee@linaro.org>
Sometimes the whole execlog is just two much so add the ability to
filter by instruction opcode or address.
[AJB: this shows for example
qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max \
-semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin -D plugin.out
the st1w SVE instruction is not instrumenting its stores.]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20220929114231.583801-36-alex.bennee@linaro.org>
This gets especially confusing if you start plugging in host addresses
from a trace and you wonder why the output keeps changing. Report when
read_memory_func fails instead of blindly disassembling the buffer
contents.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-35-alex.bennee@linaro.org>
Rather than assembling our output piecemeal lets use the same approach
as the plugin disas interface to build the disassembly string before
printing it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-34-alex.bennee@linaro.org>
This helps us construct strings elsewhere before echoing to the
monitor. It avoids having to jump through hoops like:
monitor_printf(mon, "%s", s->str);
It will be useful in following patches but for now convert all
existing plain "%s" printfs to use the _puts api.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-32-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-31-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-30-alex.bennee@linaro.org>
s390-ccw remains a bit more complex, because the -march=z900 test is done
only for the native cross compiler. Otherwise, all that is needed is
to pass the (now mandatory) target argument to write_target_makefile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-29-alex.bennee@linaro.org>
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
Let write_target_makefile handle both host and container cross compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-27-alex.bennee@linaro.org>
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
Almost all invocations of run-test have either "$* on $(TARGET_NAME)"
or "$< on $(TARGET_NAME)" as the last argument. So provide a default
test name, while allowing an escape hatch for custom names.
As an additional simplification, remove the need to do shell quoting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-24-alex.bennee@linaro.org>
Make tests/tcg/ppc64le include tests/tcg/ppc64 instead of duplicating
the rules. Because the ppc64le vpath includes tests/tcg/ppc64 but
not vice versa, the tests have to be moved from tests/tcg/ppc64le/
to tests/tcg/ppc64.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-23-alex.bennee@linaro.org>
