The function is used on save at this point. The following commits will
use it on load.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231024084043.2926316-5-marcandre.lureau@redhat.com>
NR_IOBUS_DEVS was increased to 200 in Linux 2.6.34. By Linux 3.5 it had
increased to 1000 and later ioeventfds were changed to not count against
the limit. But the earlier limit of 200 would already be enough for
kvm_check_many_ioeventfds() to be true, so remove the check.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a remnant of pre-VFIO device assignment; it is not defined
anymore by Linux and not used by QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 3.5, we can require it unconditionally
in kvm_irqchip_send_msi(). However, not all architectures have to implement
it so check it only in x86, the only architecture that ever had MSI injection
but not KVM_CAP_SIGNAL_MSI.
ARM uses it to detect the presence of the ITS emulation in the kernel,
introduced in Linux 4.8. Assume that it's there and possibly fail when
realizing the arm-its-kvm device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ARM array and VIC peripheral are only used by the
2400 series, remove them from the common AspeedSoCState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The v7-A cluster is specific to the Aspeed 2600 series,
remove it from the common AspeedSoCState.
The ARM cores belong to the MP cluster, but the array
is currently used by TYPE_ASPEED2600_SOC. We'll clean
that soon, but for now keep it in Aspeed2600SoCState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The v7-M core is specific to the Aspeed 10x0 series,
remove it from the common AspeedSoCState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_ASPEED2400_SOC inherits from TYPE_ASPEED_SOC.
In few commits we'll add more fields, but to keep
review process simple, don't add any yet.
TYPE_ASPEED_SOC is common to various Aspeed SoCs,
define it in aspeed_soc_common.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_ASPEED2600_SOC inherits from TYPE_ASPEED_SOC.
In few commits we'll add more fields, but to keep
review process simple, don't add any yet.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_ASPEED10X0_SOC inherits from TYPE_ASPEED_SOC.
In few commits we'll add more fields, but to keep
review process simple, don't add any yet.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
tcg: Introduce tcg_use_softmmu
tcg: Optimize past conditional branches
tcg: Use constant zero when expanding with divu2
tcg: Add negsetcondi
tcg: Define MO_TL
tcg: Export tcg_gen_ext_{i32,i64,tl}
target/*: Use tcg_gen_ext_*
tcg/ppc: Enable direct branching tcg_out_goto_tb with TCG_REG_TB
tcg/ppc: Use ADDPCIS for power9
tcg/ppc: Use prefixed instructions for power10
tcg/ppc: Disable TCG_REG_TB for Power9/Power10
tcg/ppc: Enable direct branching tcg_out_goto_tb with TCG_REG_TB
tcg/ppc: Use ADDPCIS for power9
tcg/ppc: Use prefixed instructions for power10
tcg/ppc: Disable TCG_REG_TB for Power9/Power10
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmU2t18dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9uXQgAhT1mDy5sg7mfSWuc
X7i54C3n6Ykyra0HDG47dt4G0gkACEs7tDkllHIxhqTPKCrzpevyZEoyigr2MEOa
3GCwxvJORb27Ql2aiM1K8cdlEbzcrx+RZbl4lwqZpZbmMUbz/ZQI4xPEAf2yKdfB
jTzi+Iu6ziPVqVQrg6fTm1I7YgQI85qcfKxi5lBaXgSfxPXGSlLeDw9Y8QjLHXRx
nSiGpWiUd5TkqZgLIctShDbK4NEHcvjXUTW4rMWU9l5Cjdf9ZIhxcCxgKTXtOxBi
9tUdGOiup2HudOFf+DpQorzWpwRwy3NGpUF7n+WmevQZ1Qh8uNKsveFB0uuqObLg
zlTI2Q==
=lgiT
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20231023' of https://gitlab.com/rth7680/qemu into staging
tcg: Drop unused tcg_temp_free define
tcg: Introduce tcg_use_softmmu
tcg: Optimize past conditional branches
tcg: Use constant zero when expanding with divu2
tcg: Add negsetcondi
tcg: Define MO_TL
tcg: Export tcg_gen_ext_{i32,i64,tl}
target/*: Use tcg_gen_ext_*
tcg/ppc: Enable direct branching tcg_out_goto_tb with TCG_REG_TB
tcg/ppc: Use ADDPCIS for power9
tcg/ppc: Use prefixed instructions for power10
tcg/ppc: Disable TCG_REG_TB for Power9/Power10
tcg/ppc: Enable direct branching tcg_out_goto_tb with TCG_REG_TB
tcg/ppc: Use ADDPCIS for power9
tcg/ppc: Use prefixed instructions for power10
tcg/ppc: Disable TCG_REG_TB for Power9/Power10
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmU2t18dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9uXQgAhT1mDy5sg7mfSWuc
# X7i54C3n6Ykyra0HDG47dt4G0gkACEs7tDkllHIxhqTPKCrzpevyZEoyigr2MEOa
# 3GCwxvJORb27Ql2aiM1K8cdlEbzcrx+RZbl4lwqZpZbmMUbz/ZQI4xPEAf2yKdfB
# jTzi+Iu6ziPVqVQrg6fTm1I7YgQI85qcfKxi5lBaXgSfxPXGSlLeDw9Y8QjLHXRx
# nSiGpWiUd5TkqZgLIctShDbK4NEHcvjXUTW4rMWU9l5Cjdf9ZIhxcCxgKTXtOxBi
# 9tUdGOiup2HudOFf+DpQorzWpwRwy3NGpUF7n+WmevQZ1Qh8uNKsveFB0uuqObLg
# zlTI2Q==
# =lgiT
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 23 Oct 2023 11:11:43 PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20231023' of https://gitlab.com/rth7680/qemu: (38 commits)
target/xtensa: Use tcg_gen_sextract_i32
target/tricore: Use tcg_gen_*extract_tl
target/rx: Use tcg_gen_ext_i32
target/m68k: Use tcg_gen_ext_i32
target/i386: Use tcg_gen_ext_tl
target/arm: Use tcg_gen_ext_i64
tcg: Define MO_TL
tcg: Export tcg_gen_ext_{i32,i64,tl}
tcg: add negsetcondi
target/i386: Use i128 for 128 and 256-bit loads and stores
tcg: Add tcg_gen_{ld,st}_i128
tcg: Optimize past conditional branches
tcg: Use constant zero when expanding with divu2
tcg: drop unused tcg_temp_free define
tcg/s390x: Use tcg_use_softmmu
tcg/riscv: Use tcg_use_softmmu
tcg/riscv: Do not reserve TCG_GUEST_BASE_REG for guest_base zero
tcg/ppc: Use tcg_use_softmmu
tcg/mips: Use tcg_use_softmmu
tcg/loongarch64: Use tcg_use_softmmu
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
=ILek
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will also come in handy later for "less than" comparisons.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <03ba02fd-fade-4409-be16-2f81a5690b4c@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The two concrete type functions already existed, merely needing
a bit of hardening to invalid inputs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can be useful to write a shift bit extraction that does not
depend on TARGET_LONG_BITS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231019104648.389942-15-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not require the translators to jump through concat and
extract of i64 in order to move values to and from env.
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use of the API was removed a while back, but the define wasn't.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231015010046.16020-1-vapier@gentoo.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Begin disconnecting CONFIG_SOFTMMU from !CONFIG_USER_ONLY.
Introduce a variable which can be set at startup to select
one method or another for user-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VHOST_USER_PROTOCOL_F_XEN_MMAP feature bit was defined in
f21e95ee97, which has been part of qemu's 8.1.0 release. However, it
seems it was never added to qemu's code, but it is well possible that it
is already used by different front-ends outside of qemu (i.e., Xen).
VHOST_USER_PROTOCOL_F_SHARED_OBJECT in contrast was added to qemu's code
in 1609476662, but never defined in the vhost-user specification. As a
consequence, both bits were defined to be 17, which cannot work.
Regardless of whether actual code or the specification should take
precedence, F_XEN_MMAP is already part of a qemu release, while
F_SHARED_OBJECT is not. Therefore, bump the latter to take number 18
instead of 17, and add this to the specification.
Take the opportunity to add at least a little note on the
VhostUserShared structure to the specification. This structure is
referenced by the new commands introduced in 1609476662, but was not
defined.
Fixes: 1609476662
("vhost-user: add shared_object msg")
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016083201.23736-1-hreitz@redhat.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a simple _DSM call support for the ACPI0017 device to return fake QTG
ID values of 0 and 1 in all cases. This for _DSM plumbing testing from the OS.
Following edited for readability
Device (CXLM)
{
Name (_HID, "ACPI0017") // _HID: Hardware ID
...
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
If ((Arg0 == ToUUID ("f365f9a6-a7de-4071-a66a-b40c0b4f8e52")))
{
If ((Arg2 == Zero))
{
Return (Buffer (One) { 0x01 })
}
If ((Arg2 == One))
{
Return (Package (0x02)
{
One,
Package (0x02)
{
Zero,
One
}
})
}
}
}
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231012125623.21101-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the vhost-user is reconnecting to the backend, and if the vhost-user fails
at the get_features in vhost_dev_init(), then the reconnect will fail
and it will not be retriggered forever.
The reason is:
When the vhost-user fails at get_features, the vhost_dev_cleanup will be called
immediately.
vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'.
The reconnect path is:
vhost_user_blk_event
vhost_user_async_close(.. vhost_user_blk_disconnect ..)
qemu_chr_fe_set_handlers <----- clear the notifier callback
schedule vhost_user_async_close_bh
The vhost->vdev is null, so the vhost_user_blk_disconnect will not be
called, then the event fd callback will not be reinstalled.
All vhost-user devices have this issue, including vhost-user-blk/scsi.
With this patch, if the vdev->vdev is null, the fd callback will still
be reinstalled.
Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling")
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-6-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the backend crashes and restarts, the device is broken.
This patch adds reconnect for vhost-user-scsi.
This patch also improves the error messages, and reports some silent errors.
Tested with spdk backend.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231009044735.941655-4-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Multiple devices need this macro, move it to a common header.
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-3-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU's PIIX3 implementation actually models the real PIIX4, but with different
PCI IDs. Usually, guests deal just fine with it. Still, in order to provide a
more consistent illusion to guests, allow QEMU's PIIX4 implementation to be used
in the PC machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-30-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the PC machine, the PIT is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-22-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the PC machine, the PIC is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-21-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX4 has its own, private PIIX4State structure. PIIX3 has almost the
same structure, provided in a public header. So reuse it and add a
cpu_intr attribute to it which is only used by PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-19-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_PIIX3_PCI_DEVICE was the former base class of the Xen and non-Xen variants
of the PIIX3 ISA device models. It will become the base class for the PIIX3 and
PIIX4 device models, so drop the "3" from the type names.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-15-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The power management controller is an integral part of PIIX3 (function 3). So
create it as part of the south bridge.
Note that the ACPI function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-14-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The USB controller is an integral part of PIIX3 (function 2). So create
it as part of the south bridge.
Note that the USB function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-13-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IDE controller is an integral part of PIIX3 (function 1). So create it as
part of the south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-12-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_PIIX3_DEVICE doesn't instantiate a PIC since it relies on the board to do
so. The "pic" attribute, however, suggests that there is one. Rename the
attribute to reflect that it represents ISA interrupt lines. Use the same naming
convention as in the VIA south bridges as well as in TYPE_I82378.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid assigning the private member of struct PIIX3State from outside which goes
against best QOM practices. Instead, implement best QOM practice by adding an
"isa-irqs" array property to TYPE_PIIX3_DEVICE and assign it in board code, i.e.
from outside.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX_NUM_PIC_IRQS is assumed to be the same as ISA_NUM_IRQS, otherwise
inconsistencies can occur.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-5-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-scsi has a VirtioDeviceClass->reset() function that calls
->vhost_reset_device(). The other vhost devices don't notify the vhost
device upon reset.
Stateful vhost devices may need to handle device reset in order to free
resources or prevent stale device state from interfering after reset.
Call ->vhost_device_reset() from virtio_reset() so that that vhost
devices are notified of device reset.
This patch affects behavior as follows:
- vhost-kernel: No change in behavior since ->vhost_reset_device() is
not implemented.
- vhost-user: back-ends that negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE now receive a
VHOST_USER_DEVICE_RESET message upon device reset. Otherwise there is
no change in behavior. DPDK, SPDK, libvhost-user, and the
vhost-user-backend crate do not negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE automatically.
- vhost-vdpa: an extra SET_STATUS 0 call is made during device reset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Coverity scan reports multiple false-positive "defects" for the
following series of actions in virtio.c:
MemoryRegionCache indirect_desc_cache;
address_space_cache_init_empty(&indirect_desc_cache);
address_space_cache_destroy(&indirect_desc_cache);
For some reason it's unable to recognize the dependency between 'mrs.mr'
and 'fv' and insists that '!mrs.mr' check in address_space_cache_destroy
may take a 'false' branch, even though it is explicitly initialized to
NULL in the address_space_cache_init_empty():
*** CID 1522371: Memory - illegal accesses (UNINIT)
/qemu/hw/virtio/virtio.c: 1627 in virtqueue_split_pop()
1621 }
1622
1623 vq->inuse++;
1624
1625 trace_virtqueue_pop(vq, elem, elem->in_num, elem->out_num);
1626 done:
>>> CID 1522371: Memory - illegal accesses (UNINIT)
>>> Using uninitialized value "indirect_desc_cache.fv" when
>>> calling "address_space_cache_destroy".
1627 address_space_cache_destroy(&indirect_desc_cache);
1628
1629 return elem;
1630
1631 err_undo_map:
1632 virtqueue_undo_map_desc(out_num, in_num, iov);
** CID 1522370: Memory - illegal accesses (UNINIT)
Instead of trying to silence these false positive reports in 4
different places, initializing 'fv' as well, as this doesn't result
in any noticeable performance impact.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20231009104322.3085887-1-i.maximets@ovn.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
=Esj+
-----END PGP SIGNATURE-----
Merge tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Add emulation of a C3700 HP-PARISC workstation
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
# X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
# jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
# =Esj+
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 15:51:57 PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Add new HP C3700 machine
hw/hppa: Split out machine creation
hw/hppa: Provide RTC and DebugOutputPort on CPU #0
hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
MAINTAINERS: Update HP-PARISC entries
pci-host: Wire up new Astro/Elroy PCI bridge
hw/pci-host: Add Astro system bus adapter found on PA-RISC machines
lasips2: LASI PS/2 devices are not user-createable
pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip
hw/hppa: Require at least SeaBIOS-hppa version 10
target/hppa: Update to SeaBIOS-hppa version 10
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
-----BEGIN PGP SIGNATURE-----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=9dZy
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20231019' of https://github.com/philmd/qemu into staging
Misc hardware patch queue
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmUxnKAACgkQ4+MsLN6t
# wN6UPw//abFZgckpxDYow4UfMu7esvkhICBvXjqDEdX2U/PBYmef049T5RVW8oDm
# NWnxRA9XydzTeToH56tU2tjXbjWKF5LcJVwrCNl6XFRdLYaR3hzejm96hX99C89J
# PB/2ineeAwidBoFfgjkvz0FLRr1ePaN74YXedPSHzywG+0dAOvpNUubbsggn3i5k
# 1wTlgfDvL6iz8NMEOSBp6cv5D4Ix0WshkqlCac0gQ74lYSM1tk/EeRiSy2IHWQQB
# 4FHd9Wo9brzLQCbhbb4FapTK0POScy0LebzRWOWfLtyWS+FRBC3kxO126I67CwMb
# XRS4YgBqC3U7IGsbzV+fWP01pVeJRzZ1vrv4vdiIYvqTdgNlmFbGjJUwEmPmrokt
# q5UreAjMUNLMEXiY6QHFq3N5I+UMY1jslcf7K/ZwDqSlqaquAe+gbnQOAMXDYgb6
# GWsBrLM2WA5E9ObbxsHdxgZqW1NxcWJpSBvjNiOV9t/jqoqpxYwHr5HAvR1xUwm+
# qRKRayRpLlX/Yad4NlvJaH5jvsMrI4bnxTYWVevLvYzc07Xo3dVxW1c+P+WCdjfM
# O3bLAvwO7Mw7GRiSNpU8zTbRJu/dS4NWDWZ24u606Cy7qD/qouz89JjkKVYYSFkX
# vNp7YOenPf4K6pak/lC3NOLIPlYmnnCLv3RCiaO6wHi4bk1yEBU=
# =9dZy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 14:16:16 PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20231019' of https://github.com/philmd/qemu: (46 commits)
ui/input: Constify QemuInputHandler structure
hw/net: Declare link using static DEFINE_PROP_LINK() macro
hw/dma: Declare link using static DEFINE_PROP_LINK() macro
hw/scsi/virtio-scsi: Use VIRTIO_SCSI_COMMON() macro
hw/display/virtio-gpu: Use VIRTIO_DEVICE() macro
hw/block/vhost-user-blk: Use DEVICE() / VIRTIO_DEVICE() macros
hw/virtio/virtio-pmem: Replace impossible check by assertion
hw/s390x/css-bridge: Realize sysbus device before accessing it
hw/isa: Realize ISA bridge device before accessing it
hw/arm/virt: Realize ARM_GICV2M sysbus device before accessing it
hw/acpi: Realize ACPI_GED sysbus device before accessing it
hw/pci-host/bonito: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Move sysbus_mmio_map call from init -> realize
hw/i386/intel_iommu: Do not use SysBus API to map local MMIO region
hw/i386/amd_iommu: Do not use SysBus API to map local MMIO region
hw/audio/pcspk: Inline pcspk_init()
hw/intc/spapr_xive: Do not use SysBus API to map local MMIO region
hw/intc/spapr_xive: Move sysbus_init_mmio() calls around
hw/ppc/pnv: Do not use SysBus API to map local MMIO region
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass the callback function to add_migration_state_change_notifier so
that migration can initialize the notifier on add and clear it on
delete, which simplifies the call sites. Shorten the function names
so the extra arg can be added more legibly. Hide the global notifier
list in a new function migration_call_notifiers, and make it externally
visible so future live update code can call it.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1686148954-250144-1-git-send-email-steven.sistare@oracle.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
When the host supports the CPU topology facility, the PTF
instruction with function code 2 is interpreted by the SIE,
provided that the userland hypervisor activates the interpretation
by using the KVM_CAP_S390_CPU_TOPOLOGY KVM extension.
The PTF instructions with function code 0 and 1 are intercepted
and must be emulated by the userland hypervisor.
During RESET all CPU of the configuration are placed in
horizontal polarity.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-8-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
During a subsystem reset the Topology-Change-Report is cleared
by the machine.
Let's ask KVM to clear the Modified Topology Change Report (MTCR)
bit of the SCA in the case of a subsystem reset.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-7-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
