rerror=ignore was returning true from scsi_handle_rw_error but the callers were not
calling scsi_req_complete when rerror=ignore returns true (this is the correct thing
to do when true is returned after executing a passthrough command). Fix this by
calling it in scsi_handle_rw_error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a command fails with a sense that scsi_sense_buf_to_errno converts to
ECANCELED/EAGAIN/ENOTCONN or with a unit attention, scsi_req_complete is
called twice. This caused a crash.
Reported-by: Wangguang <wang.guangA@h3c.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When [2] was fixed it was agreed that adding and calling post_plug()
callback after device_reset() was low risk approach to hotfix issue
right before release. So it was merged instead of moving already
existing plug() callback after device_reset() is called which would
be more risky and require all plug() callbacks audit.
Looking at the current plug() callbacks, it doesn't seem that moving
plug() callback after device_reset() is breaking anything, so here
goes agreed upon [3] proper fix which essentially reverts [1][2]
and moves plug() callback after device_reset().
This way devices always comes to plug() stage, after it's been fully
initialized (including being reset), which fixes race condition [2]
without need for an extra post_plug() callback.
1. (25e897881 "qdev: add HotplugHandler->post_plug() callback")
2. (8449bcf94 "virtio-scsi: fix hotplug ->reset() vs event race")
3. https://www.mail-archive.com/qemu-devel@nongnu.org/msg549915.html
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1539696820-273275-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Pierre Morel<pmorel@linux.ibm.com>
Acked-by: Pierre Morel<pmorel@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return value of qemu_timedate_diff(), used for calculation offset in
QAPI 'RTC_CHANGE' event, restored to keep compatibility. Since it
wasn't documented that difference is relative to host clock
advancement, this change also adds important note to 'RTC_CHANGE'
event description to highlight established implementation specifics.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <1fc12c77e8b7115d3842919a8b586d9cbe4efca6.1539846575.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes all current "-rtc" option parameters combinations produce
fixed/unambiguous RTC timedate reference for hardware emulation
frontends.
It restores determinism of guest execution when used with clock=vm and
specified base <datetime> value.
Buglink: https://bugs.launchpad.net/qemu/+bug/1797033
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <1d963c3e013dfedafa1f6edb9fb219b7e49e39da.1539846575.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Documentation describing -rtc option updated to better match current
implementation and highlight some important specifics.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <1b245c6c0803d4bf11dcbf9eb32f34af8c2bd0b4.1539846575.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
accel_init_machine sets *(acc->allowed) to true if acc->init_machine(ms)
succeeds. There's no need to have both hvf_allowed and hvf_disabled.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20181018143051.48508-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to Intel(R)64 and IA-32 Architectures Software Developer's
Manual, the following one-byte registers should be fetched when REX
prefix is present (sorted by reg encoding index):
AL, CL, DL, BL, SPL, BPL, SIL, DIL, R8L - R15L
The first 8 are fetched if REX.R is zero, the last 8 if non-zero.
The following registers should be fetched for instructions without REX
prefix (also sorted by reg encoding index):
AL, CL, DL, BL, AH, CH, DH, BH
Current emulation code doesn't handle accesses to SPL, BPL, SIL, DIL
when REX is present, thefore an instruction 40883e "mov %dil,(%rsi)" is
decoded as "mov %bh,(%rsi)".
That caused an infinite loop in vp_reset:
https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg03293.html
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20181018134401.44471-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V PV IPI support is merged to KVM, enable the feature in Qemu. When
enabled, this allows Windows guests to send IPIs to other vCPUs with a
single hypercall even when there are >64 vCPUs in the request.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20181009130853.6412-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As QEMU becomes more multi-threaded and non-synchronized, checkpoints
move from thread to thread. And the event queue that processed at checkpoints
should belong to the same thread in both record and replay executions.
This patch disables asynchronous event processing at virtual clock
checkpoint, because it may be invoked in different threads at record and
replay. This patch is temporary fix until the checkpoints are completely
refactored.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20181018063345.7433.11678.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception.pad field is going to be renamed to pending in an upcoming
header file update. Remove the unnecessary initialization; it was
introduced to please valgrind (commit 7e680753cf) but they were later
rendered unnecessary by commit 076796f8fd, which added the "= {}"
initializer to the declaration of "events". Therefore the patch does
not change behavior in any way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds EXTERNAL attribute definition to qemu timers subsystem and assigns
it to virtual clock timers, used in slirp (ICMP IPv6) and ui (key queue).
Virtual clock processing in rr mode can use this attribute instead of a
separate clock type.
Fixes: 87f4fe7653
Fixes: 775a412bf8
Fixes: 9888091404
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <e771f96ab94e86b54b9a783c974f2af3009fe5d1.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attributes are simple flags, associated with individual timers for their
whole lifetime. They intended to be used to mark individual timers for
special handling when they fire.
New/init functions family in timer interface updated and refactored (new
'attribute' argument added, timer_list replaced with timer_list_group+type
combinations, comments improved to avoid info duplication). Also existing
aio interface extended with attribute-enabled variants of functions,
which create/initialize timers.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <f47b81dbce734e9806f9516eba8ca588e6321c2f.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That patch series introduced new virtual clock type for use in external
subsystems. It breaks desired behavior in non-record/replay usage
scenarios due to a small change to existing behavior. Processing of
virtual timers belonging to new clock type is kicked off to the main
loop, which makes these timers asynchronous with vCPU thread and,
in icount mode, with whole guest execution. This breaks expected
determinism in non-record/replay icount mode of emulation where these
"external subsystems" are isolated from the host (i.e. they are
external only to guest core, not to the entire emulation environment).
Example for slirp ("user" backend for network device):
User runs qemu in icount mode with rtc clock=vm without any external
communication interfaces but with "-netdev user,restrict=on". It expects
deterministic execution, because network services are emulated inside
qemu and isolated from host. There are no reasons to get reply from DHCP
server with different delay or something like that.
The next patches revert reimplements the same changes in a better way.
This reverts commit 87f4fe7653.
This reverts commit 775a412bf8.
This reverts commit 9888091404.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <18b1e7c8f155fe26976f91be06bde98eef6f8751.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They are not consecutive with DAC1_FRAME* and DAC2_FRAME*; Coverity
still complains about es1370_read, while es1370_write was fixed in
commit cf9270e522.
Fixes: 154c1d1f96
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This should have been removed as part of commit
692fbdf9f4.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generic-loader is currently compiled target specific due to one
single "#ifdef TARGET_WORDS_BIGENDIAN" in the file. We have already a
function called target_words_bigendian() for this instead, so we can
put the generic-loader into common-obj to save some compilation time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got three places already that provide a prototype for this
function in a .c file - that's ugly. Let's provide a proper prototype
in a header instead, with a proper description why this function should
not be used in most cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Each device that is instantiatable by the users should be marked with
a category. Since the generic-loader does not fit anywhere else, put
it into the MISC category.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Older versions of Clang (before 3.5) and GCC (before 4.1) do not
support the "__attribute__((flatten))" yet. We don't care about
such old versions of GCC anymore, but since Clang 3.4 is still
used in EPEL for RHEL7 / CentOS 7, we should not use this attribute
directly but with a wrapper macro instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This probably happened when interpreting the utf8 name as latin1.
Fixes dbbaaff686 and f4e94dfefb.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On PCXS chips (PA7000, pa 1.1a), trap #18 is raised on memory faults,
while all later chips (>= PA7100) generate either trap #26, #27 or #28
(depending on the fault type).
Since the current qemu emulation emulates a B160L machine (with a
PA7300LC PCX-L2 chip, we should raise trap #26 (EXCP_DMAR) instead
of #18 (EXCP_DMP) on access faults by the Linux kernel to page zero.
With the patch we now get the correct output (I tested against real
hardware):
Kernel Fault: Code=26 (Data memory access rights trap)
instead of:
Kernel Fault: Code=18 (Data memory protection/unaligned access trap)
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20181007205153.GA30270@ls3530.fritz.box>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UART
* target/arm: Fix aarch64_sve_change_el wrt EL0
* target/arm: Define fields of ISAR registers
* target/arm: Align cortex-r5 id_isar0
* target/arm: Fix cortex-a7 id_isar0
* net/cadence_gem: Fix various bugs, add support for new
features that will be used by the Xilinx Versal board
* target-arm: powerctl: Enable HVC when starting CPUs to EL2
* target/arm: Add the Cortex-A72
* target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO
* target/arm: Mask PMOVSR writes based on supported counters
* target/arm: Initialize ARMMMUFaultInfo in v7m_stack_read/write
* coccinelle: new inplace-byteswaps.cocci to remove inplace-byteswapping calls
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T/np
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181016-1' into staging
target-arm queue:
* hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UART
* target/arm: Fix aarch64_sve_change_el wrt EL0
* target/arm: Define fields of ISAR registers
* target/arm: Align cortex-r5 id_isar0
* target/arm: Fix cortex-a7 id_isar0
* net/cadence_gem: Fix various bugs, add support for new
features that will be used by the Xilinx Versal board
* target-arm: powerctl: Enable HVC when starting CPUs to EL2
* target/arm: Add the Cortex-A72
* target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO
* target/arm: Mask PMOVSR writes based on supported counters
* target/arm: Initialize ARMMMUFaultInfo in v7m_stack_read/write
* coccinelle: new inplace-byteswaps.cocci to remove inplace-byteswapping calls
# gpg: Signature made Tue 16 Oct 2018 17:42:01 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20181016-1:
coccinelle: new inplace-byteswaps.cocci to remove inplace-byteswapping calls
target/arm: Initialize ARMMMUFaultInfo in v7m_stack_read/write
target/arm: Mask PMOVSR writes based on supported counters
target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO
target/arm: Add the Cortex-A72
target-arm: powerctl: Enable HVC when starting CPUs to EL2
net: cadence_gem: Implement support for 64bit descriptor addresses
net: cadence_gem: Add support for selecting the DMA MemoryRegion
net: cadence_gem: Add support for extended descriptors
net: cadence_gem: Add macro with max number of descriptor words
net: cadence_gem: Use uint32_t for 32bit descriptor words
net: cadence_gem: Disable TSU feature bit
target/arm: Fix cortex-a7 id_isar0
target/arm: Align cortex-r5 id_isar0
target/arm: Define fields of ISAR registers
target/arm: Fix aarch64_sve_change_el wrt EL0
hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UART
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a new Coccinelle script which replaces uses of the inplace
byteswapping functions *_to_cpus() and cpu_to_*s() with their
not-in-place equivalents. This is useful for where the swapping
is done on members of a packed struct -- taking the address
of the member to pass it to an inplace function is undefined
behaviour in C.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181009181612.10633-1-peter.maydell@linaro.org
The get_phys_addr() functions take a pointer to an ARMMMUFaultInfo
struct, which they fill in only if a fault occurs. This means that
the caller must always zero-initialize the struct before passing
it in. We forgot to do this in v7m_stack_read() and v7m_stack_write().
Correct the error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011172057.9466-1-peter.maydell@linaro.org
This is an amendment to my earlier patch:
commit 7ece99b17e
Author: Aaron Lindsay <alindsay@codeaurora.org>
Date: Thu Apr 26 11:04:39 2018 +0100
target/arm: Mask PMU register writes based on PMCR_EL0.N
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-3-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I previously fixed this for PMINTENSET_EL1, but missed these.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-2-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the ARM Cortex-A72.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-11-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When QEMU provides the equivalent of the EL3 firmware, we
need to enable HVCs in scr_el3 when turning on CPUs that
target EL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-10-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement support for 64bit descriptor addresses.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-8-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for selecting the Memory Region that the GEM
will do DMA to.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181011021931.4249-7-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for extended descriptors with optional 64bit
addressing and timestamping. QEMU will not yet provide
timestamps (always leaving the valid timestamp bit as zero).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add macro with max number of DMA descriptor words.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use uint32_t instead of unsigned to describe 32bit descriptor words.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
E-mail to one of block/sheepdog maintainers Mitake Hitoshi bounces
<mitake.hitoshi@lab.ntt.co.jp>: unknown user: "mitake.hitoshi"
and no current address is known. So just remove it.
Signed-off-by: Liu Yuan <liuyuan1@cmiot.chinamobile.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
GNU make is perfectly happy to use 'check-FOO-y += bar' to
initialize check-FOO-y. (GNU Automake strictly insists that
you cannot use += until after an initial = per variable, but
thankfully we aren't using automake).
As we have had more than one instance where copy-and-paste of
'check-FOO-y = bar' from a first test under category FOO into
an additional test, which ends up disabling the first (see
commits 992159c7 and 4429532b), it's better to just always use
the form that survives copy-and-paste, even for categories that
don't currently add more than one test.
Done with s/^\(check-[a-z]*-y \)=/\1+=/g
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
