Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We add a bitmap merge operation to assist in error cases
where we wish to combine two bitmaps together.
This is algorithmically O(bits) provided HBITMAP_LEVELS remains
constant. For a full bitmap on a 64bit machine:
sum(bits/64^k, k, 0, HBITMAP_LEVELS) ~= 1.01587 * bits
We may be able to improve running speed for particularly sparse
bitmaps by using iterators, but the running time for dense maps
will be worse.
We present the simpler solution first, and we can refine it later
if needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If QEMU forks after the CPU threads have been created, qemu_mutex_lock_iothread
will not be able to do qemu_cpu_kick_thread. There is no solution other than
assuming that forks after the CPU threads have been created will end up in an
exec. Forks before the CPU threads have been created (such as -daemonize)
have to call rcu_after_fork manually.
Notably, the oxygen theme for GTK+ forks and shows a "No such process" error
without this patch.
This patch can be reverted once the iothread loses the "kick the TCG thread"
magic.
User-mode emulation does not use the iothread, so it can also call
rcu_after_fork.
Reported by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2ed1ebcf6 "timer: replace time() with QEMU_CLOCK_HOST" broke compile
when configured with --enable-profiler. Turned out the profiler has been
broken for a while.
This does s/qemu_time/tcg_time/ as the profiler only works in a TCG mode.
This also fixes the compile error.
This changes profile_getclock() to return nanoseconds rather than
CPU ticks as the "profile" HMP command prints seconds and there is no
platform-independent way to get ticks-per-second rate.
Since TCG is quite slow and get_clock() returns nanoseconds (fine
enough), this should not affect precision much.
This removes unused qemu_time_start and tlb_flush_time.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <1426478258-29961-1-git-send-email-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a not-so-subtle race in QSLIST_INSERT_HEAD_ATOMIC.
Because atomic_cmpxchg returns the old value instead of a success flag,
QSLIST_INSERT_HEAD_ATOMIC was checking for success by comparing against
the second argument to atomic_cmpxchg. Unfortunately, this only works
if the second argument is a local or thread-local variable.
If it is in memory, it can be subject to common subexpression elimination
(and then everything's fine) or reloaded after the atomic_cmpxchg,
depending on the compiler's whims. If the latter happens, the race can
happen. A thread can sneak in, doing something on elm->field.sle_next
after the atomic_cmpxchg and before the comparison. This causes a wrong
failure, and then two threads are using "elm" at the same time. In the
case discovered by Christian, the sequence was likely something like this:
thread 1 | thread 2
QSLIST_INSERT_HEAD_ATOMIC |
atomic_cmpxchg succeeds |
elm added to list |
| steal release_pool
| QSLIST_REMOVE_HEAD
| elm removed from list
| ...
| QSLIST_INSERT_HEAD_ATOMIC
| (overwrites sle_next)
spurious failure |
atomic_cmpxchg succeeds |
elm added to list again |
|
steal release_pool |
QSLIST_REMOVE_HEAD |
elm removed again |
The last three steps could be done by a third thread as well.
A reproducer that failed in a matter of seconds is as follows:
- the guest has 32 VCPUs on a 28 core host (hyperthreading was enabled),
memory was 16G just to err on the safe side (the host has 64G, but hey
at least you need no s390)
- the guest has 24 null-aio virtio-blk devices using dataplane
(-object iothread,id=ioN -drive if=none,id=blkN,driver=null-aio,size=500G
-device virtio-blk-pci,iothread=ioN,drive=blkN)
- the guest also has a single network interface. It's only doing loopback
tests so slirp vs. tap and the model doesn't matter.
- the guest is running fio with the following script:
[global]
rw=randread
blocksize=16k
ioengine=libaio
runtime=10m
buffered=0
fallocate=none
time_based
iodepth=32
[virtio1a]
filename=/dev/block/252\:16
[virtio1b]
filename=/dev/block/252\:16
...
[virtio24a]
filename=/dev/block/252\:384
[virtio24b]
filename=/dev/block/252\:384
[listen1]
protocol=tcp
ioengine=net
port=12345
listen
rw=read
bs=4k
size=1000g
[connect1]
protocol=tcp
hostname=localhost
ioengine=net
port=12345
protocol=tcp
rw=write
startdelay=1
size=1000g
...
[listen8]
protocol=tcp
ioengine=net
port=12352
listen
rw=read
bs=4k
size=1000g
[connect8]
protocol=tcp
hostname=localhost
ioengine=net
port=12352
rw=write
startdelay=1
size=1000g
Moral of the story: I should refrain from writing more clever stuff.
At least it looks like it is not too clever to be undebuggable.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1426002357-6889-1-git-send-email-pbonzini@redhat.com
Fixes: c740ad92d0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The documentation for sextract64() claims that the return type is
an int64_t, but the code itself disagrees. Fix the return type to
conform to the documentation and to bring it into line with
sextract32(), which returns int32_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1423231328-15662-1-git-send-email-peter.maydell@linaro.org
img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add RCU-enabled variants on the existing bsd DQ facility. Each
operation has the same interface as the existing (non-RCU)
version. Also, each operation is implemented as macro.
Using the RCU-enabled QLIST, existing QLIST users will be able to
convert to RCU without using a different list interface.
Signed-off-by: Mike Day <ncmike@ncultra.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the introduction of QEMU_CLOCK_VIRTUAL_RT, the computation of
sc->diff_clk can be simplified nicely:
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
qemu_clock_get_ns(QEMU_CLOCK_REALTIME) +
cpu_get_clock_offset()
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - cpu_get_clock_offset())
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + timers_state.cpu_clock_offset)
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT)
Cc: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Asynchronous callbacks provided by call_rcu are particularly important
for QEMU, because the BQL makes it hard to use synchronize_rcu.
In addition, the current RCU implementation is not particularly friendly
to multiple concurrent synchronize_rcu callers, making call_rcu even
more important.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes a (mangled) copy of the liburcu code. The main changes
are: 1) removing dependencies on many other header files in liburcu; 2)
removing for simplicity the tentative busy waiting in synchronize_rcu,
which has limited performance effects; 3) replacing futexes in
synchronize_rcu with QemuEvents for Win32 portability. The API is
the same as liburcu, so it should be possible in the future to require
liburcu on POSIX systems for example and use our copy only on Windows.
Among the various versions available I chose urcu-mb, which is the
least invasive implementation even though it does not have the
fastest rcu_read_{lock,unlock} implementation. The urcu flavor can
be changed later, after benchmarking.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, a timer was set to NULL so that we could check if it is
initialized. Use the timer_list field instead, and add a timer_deinit
function that NULLs it.
It then makes sense that timer_del be a no-op (instead of a crasher) on
such a de-initialized timer. It avoids the need to poke at the timerlist
field to check if the timers are initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentation of what the cpu_*_* accessors look like.
Correct some minor errors in the existing documentation of the
direct _p accessor family. Remove the near-duplicate comment
on the _p accessors from cpu-all.h and replace it with a reference
to the comment in bswap.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-16-git-send-email-peter.maydell@linaro.org
The Xen ioreq-server API, introduced in Xen 4.5, requires that PCI device
models explicitly register with Xen for config space accesses. This patch
adds a listener interface into qdev-core which can be used by the Xen
interface code to monitor for arrival and departure of PCI devices.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add QEMUFile interface to allow a socket to be 'shut down' - i.e. any
reads/writes will fail (and any blocking read/write will be woken).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
the record/replay series, and a few SCSI and i386 patches as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUtjlCAAoJEL/70l94x66Dy5gH/0QIHoXVH/2wuA9apNK2/gBj
2U7g08QGKlc2wQGF4a48sQf523lSt5eirVxrwta0wmvFeznrdR84d4YGpolHM67A
Q9Y5J2i+v1H6cfQH6ylq61QQ7rEC3+isa65wblLeMSCAb2W1CcV7avSKu4BSPZw2
jGr3jd2Ve7pOsULpPhiNsmmltYSeZc7sQBYc9C7fQEoxOGsNnRoKOUKPnIk1mJTc
iYH480L1MnOL3enIz13K34lQofNRhJxJBLYKhYsBydQbOh0/Ls1eifOY4xEegXZ0
IUODy6c2pk+s/IUPARpBucKGKzDxdv0DLXDV60uGn5EsYT0CjCl9/sRs3bZvaQE=
=eT8u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Mostly bugfixes and cleanups from qemu-devel. Yet another small patch from
the record/replay series, and a few SCSI and i386 patches as well.
# gpg: Signature made Wed 14 Jan 2015 09:39:14 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
cpus: consistently use QEMU_CLOCK_VIRTUAL_RT for icount_warp_rt timer
qemu-timer: rename timer_init to timer_init_tl
scsi: fix cancellation when I/O was completed but DMA was not.
rules.mak: Fix module build
hw/scsi/lsi53c895a: add support for additional diag / debug registers
qemu-common.h: optimise muldiv64 if int128 is available
target-i386: do not memcpy in and out of xmm_regs
target-i386: fix movntsd on big-endian hosts
vl.c: fix regression when reading memory size from config file
vl: Don't silently change topology when all -smp options were set
vl: fix max_cpus check
vl: Avoid unnecessary 'if' nesting
9pfs: changed to use event_notifier instead of qemu_pipe
vl.c: fix regression when reading machine type from config file
char: restore stdio echo on resume from suspend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These operations are trivial to implement and do not have ABA problems.
They are enough to implement simple multiple-producer, single consumer
lock-free lists or, as in the next patch, the multiple consumers can
steal a whole batch of elements and process them at their leisure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Destructors are the main additional feature of pthread TLS compared
to __thread. If we were using C++ (hint, hint!) we could have used
thread-local objects with a destructor. Since we are not, instead,
we add a simple Notifier-based API.
Note that the notifier must be per-thread as well. We can add a
global list as well later, perhaps.
The Win32 implementation has some complications because a) detached
threads used not to have a QemuThreadData; b) the main thread does
not go through win32_start_routine, so we have to use atexit too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
the sdhci-pci device id to make space for the rocker device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUp6bMAAoJEL/70l94x66D9q0H/06JFtq/Sn5jLJsWgkU2EcNM
VpV9E2d+RE711PuKkplTj1ee/oYLTnxG9Yf+gdR3KY0hjB/32tHi70ft1WyvbGh/
m/9AiRMmVsKqnZnOlnqgLSN97bV8RNHdpF9wmogdB6xKm5ilICHMnKgRepIBA4HE
J0CeRrFr6LENQbaEU1YGuQ4StithPCSMm3FMNAsvZsM+4ALx+gj7E6NVFgfCyium
oeUyMjqzLE4Ddm3cvelMc0I0hnr7noyzYML6jJaed0XMt5V1Ln/2zUOLfLMc6x9a
SU/mzFnnF2ieqR32M0OijS5E9EHOR46clQlxAQBOdI9qtFTtMYFwe7FIEbvQhJI=
=YI77
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
More migration fixes and more record/replay preparations. Also moves
the sdhci-pci device id to make space for the rocker device.
# gpg: Signature made Sat 03 Jan 2015 08:22:36 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
pci: move REDHAT_SDHCI device ID to make room for Rocker
block/iscsi: fix uninitialized variable
pckbd: set bits 2-3-6-7 of the output port by default
serial: refine serial_thr_ipending_needed
gen-icount: check cflags instead of use_icount global
translate: check cflags instead of use_icount global
cpu-exec: add a new CF_USE_ICOUNT cflag
target-ppc: pass DisasContext to SPR generator functions
atomic: fix position of volatile qualifier
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to introduce a wide data register for fw_cfg, but only for
the MMIO mapped device. The wide data register will also require the
tightening of endiannesses.
However we don't want to touch the I/O port mapped fw_cfg device at all.
Currently QEMU provides a single fw_cfg device type that can handle both
I/O port and MMIO mapping. This flexibility is not actually exploited by
any board in the tree, but it renders restricting the above changes to
MMIO very hard.
Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and
TYPE_FW_CFG_MEM.
TYPE_FW_CFG_IO incorporates the base I/O port and the related combined
MemoryRegion. (NB: all boards in the tree that use the I/O port mapped
flavor opt for the combined mapping; that is, when the data port overlays
the high address byte of the selector port. Therefore we can drop the
capability to map those I/O ports separately.)
TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and
data registers, and their respective MemoryRegions.
The "realize" and "props" class members are specific to each new derived
class, and become unused for the base class. The base class retains the
"reset" member and the "vmsd" member, because the reset functionality and
the set of migrated data are not specific to the mapping.
The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the
possible mappings in separation. For now fw_cfg_init() is retained as a
compatibility shim that enforces the above assumptions.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
=ncys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
sdhci: Support SDHCI devices on PCI
sdhci: Define SDHCI PCI ids
sdhci: Add "sysbus" to sdhci QOM types and methods
sdhci: Remove class "virtual" methods
sdhci: Set a default frequency clock
serial: only resample THR interrupt on rising edge of IER.THRI
serial: update LSR on enabling/disabling FIFOs
serial: clean up THRE/TEMT handling
serial: reset thri_pending on IER writes with THRI=0
linuxboot: fix loading old kernels
kvm/apic: fix 2.2->2.1 migration
target-i386: add Ivy Bridge CPU model
target-i386: add f16c and rdrand to Haswell and Broadwell
target-i386: add VME to all CPUs
pc: add 2.3 machine types
i386: do not cross the pages boundaries in replay mode
cpus: make icount warp behave well with respect to stop/cont
timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
cpu-exec: invalidate nocache translation if they are interrupted
icount: introduce cpu_get_icount_raw
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch makes icount warp use the new QEMU_CLOCK_VIRTUAL_RT clock.
This way, icount's QEMU_CLOCK_VIRTUAL will never count time during which
the virtual machine is stopped.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces new QEMU_CLOCK_VIRTUAL_RT clock, which
should be used for icount warping. In the next patch, it
will be used to avoid a huge icount warp when a virtual
machine is stopped for a long time.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate accessing the instruction counter from the compensation for
speed and halting that are introduced by qemu_icount_bias. This
introduces new infrastructure used by the record/replay patches.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to do another O(n) pass on the list; the iocb to
split the list at is already available through the array we passed to
io_submit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change the message printing code to output a separator for each option
string before it instead of after, then we don't one more extra ' ' in
the end.
To update qemu-iotests output files, most of the times one would just
copy the *.out.bad to *.out. With this change we will not have the
space disliked by checkpatch.pl.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mainly to make it less likely to conflict during merges.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
introduce memory_region_get_alignment() that returns
underlying memory block alignment or 0 if it's not
relevant/implemented for backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
at least in block layer we have the case of limits being defined for a
BlockDriverState. However, in this context often zero (0) has the special
meanining of undefined which means no limit. If two of those limits are
combined and the minimum is needed the minimum function should only return
zero if both parameters are zero.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will avoid unexpected circular header dependencies in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is based on Stefan and Joel's patch that creates a QEMUFile that goes
to a memory buffer; from:
http://lists.gnu.org/archive/html/qemu-devel/2013-03/msg05036.html
Using the QEMUFile interface, this patch adds support functions for
operating on in-memory sized buffers that can be written to or read from.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
For fixes/tweeks I've done:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUNo9yAAoJEBRUblpOawnXQDkH/1M5DxmVwUv+SZtHEdpsT7Eq
UGjRzfYXsYP/WkEqxVzYJmN0HJn9z8uJZin/dqwDPQLjCy8gf/xuaNCfoZqMuxHw
iNaTgKpi9Uy0G0VWxjlZpRu8f5JjqHbJEP6aTT0hooBHaqQoBSm1fQh/pnCUvnpB
qDQeHcOjrzIMkQJ3Ji8z2s+CapHaiIa63hJqRJztS5vbonPjngjj87dA54eIqDtQ
RwXy58y+C8YMKqfpOG6lA+RxogESyyCfDBVUA1wwRDad1mOFKUMtEd4jAL39HUgR
qINSKybG12V2bx8E+vNbaKB+68+NLdxcyR39JR2aun+a8yw+yDcF5BBiMXlqV0U=
=4bqy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IDs have long spread beyond QemuOpts: not everything with an ID
necessarily goes through QemuOpts. Commit 9aebf3b is about such a
case: block layer names are meant to be well-formed IDs, but some of
them don't go through QemuOpts, and thus weren't checked. The commit
fixed that the straightforward way: rename the internal QemuOpts
helper id_wellformed() to qemu_opts_id_wellformed() and give it
external linkage.
Instead of using it directly in block.c, the commit adds wrapper
bdrv_is_valid_name(), probably to hide the connection to QemuOpts.
Go one logical step further: emancipate IDs from QemuOpts. Rename the
function back to id_wellformed(), and put it in another file. While
there, clean up its value to bool. Peel off the bdrv_is_valid_name()
wrapper.
[Replaced stray return 0 with return false to match bool returns used
elsewhere in id_wellformed().
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
