Commit Graph

152 Commits

Author SHA1 Message Date
Jens Freimann 1191c94963 s390x/kvm: use ioctl KVM_S390_IRQ for vcpu interrupts
KVM_S390_INT uses only two parameter fields. This is not
enough to pass all required information for certain interrupts.

A new ioctl KVM_S390_IRQ is available which allows us to
inject all local interrupts as defined in the Principles of
Operation. It takes a struct kvm_s390_irq as a parameter
which can store interrupt payload data for all interrupts.

Let's use the new ioctl for injecting vcpu interrupts.

Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08 10:36:19 +02:00
Alexander Yarygin 6cb1e49de5 s390x/kvm: Support access register mode for KVM_S390_MEM_OP ioctl
Access register mode is one of the modes that control dynamic address
translation. In this mode the address space is specified by values of
the access registers. The effective address-space-control element is
obtained from the result of the access register translation. See
the "Access-Register Introduction" section of the chapter 5 "Program
Execution" in "Principles of Operations" for more details.

When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must
know which access register number to use for address translation.
This patch does several things:
- add new parameter 'uint8_t ar' to that function
- decode ar number from intercepted instructions
- pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it
to the KVM_S390_MEM_OP ioctl.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Thomas Huth a9bcd1b871 s390x/mmu: Use ioctl for reading and writing from/to guest memory
Add code to make use of the new ioctl for reading from / writing to
virtual guest memory. By using the ioctl, the memory accesses are now
protected with the so-called ipte-lock in the kernel.

[CH: moved error message into kvm_s390_mem_op()]
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Ekaterina Tumanova f07177a559 s390x/kvm: Put vm name, extended name and UUID into STSI322 SYSIB
KVM prefills the SYSIB, returned by STSI 3.2.2. This patch allows
userspace to intercept execution, and fill in the values, that are
known to qemu: machine name (8 chars), extended machine name (256
chars), extended machine name encoding (equals 2 for UTF-8) and UUID.

STSI322 qemu handler also finds a highest virtualization level in
level-3 virtualization stack that doesn't support Extended Names
(Ext Name delimiter) and propagates zero Ext Name to all levels below,
because this level is not capable of managing Extended Names of lower
levels.

Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Tony Krowiak 2eb1cd0768 s390x: CPACF: Handle key wrap machine options
Check for the aes_key_wrap and dea_key_wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.

This patch introduces two new machine options for indicating the state of
AES/DEA key wrapping functions.  This controls whether the guest will
have access to the AES/DEA crypto functions.

aes_key_wrap="on | off" is changed to aes-key-wrap="on | off"
dea_key_wrap="on | off" is changed to dea-key-wrap="on | off"

Check for the aes-key-wrap and dea-key-wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:20:11 +01:00
Dominik Dingel 2b147555f7 s390x/kvm: make use of generic vm attribute check
By using the new introduced generic interface we
can remove redundancies and clean up.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:15:45 +01:00
Jason J. Herne 3f9e59bb53 s390x/kvm: Guest Migration TOD clock synchronization
Synchronizes the guest TOD clock across a migration by sending the guest TOD
clock value to the destination system. If the guest TOD clock is not preserved
across a migration then the guest's view of time will snap backwards if the
destination host clock is behind the source host clock. This will cause the
guest to hang immediately upon resuming on the destination system.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>

Message-Id: <1425912968-54387-1-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:15:44 +01:00
Peter Maydell a195fdd028 misc fixes and cleanups
A bunch of fixes all over the place, some of the
 bugs fixed are actually regressions.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
 pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
 xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
 oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
 JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
 V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
 =RUld
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

misc fixes and cleanups

A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (25 commits)
  virtio-scsi: remove empty wrapper for cmd
  virtio-scsi: clean out duplicate cdb field
  virtio-scsi: fix cdb/sense size
  uapi/virtio_scsi: allow overriding CDB/SENSE size
  virtio-scsi: drop duplicate CDB/SENSE SIZE
  exec: don't include hw/boards for linux-user
  acpi: specify format for build_append_namestring
  MAINTAINERS: drop aliguori@amazon.com
  tpm: Move memory subregion function into realize function
  virtio-pci: Convert to realize()
  pci: Convert pci_nic_init() to Error to avoid qdev_init()
  machine: query mem-merge machine property
  machine: query dump-guest-core machine property
  hw/boards: make it safe to include for linux-user
  machine: query phandle-start machine property
  machine: query kvm-shadow-mem machine property
  kvm: add machine state to kvm_arch_init
  machine: query kernel-irqchip property
  machine: allowed/required kernel-irqchip support
  machine: replace qemu opts with iommu property
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-12 09:13:07 +00:00
Marcel Apfelbaum b16565b396 kvm: add machine state to kvm_arch_init
Needed to query machine's properties.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11 18:16:17 +01:00
Peter Maydell 165fa4091e s390x/kvm: Features and fixes for 2.3
- an extension to the elf loader to allow relocations
 - make the ccw bios relocatable. This allows for bigger ramdisks
   or smaller guests
 - Handle all slow SIGPs in QEMU (instead of kernel) for better
   compliance and correctness
 - tell the KVM module the maximum guest size. This allows KVM
   to reduce the number or page table levels
 - Several fixes/cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJVABYpAAoJEBF7vIC1phx8M/kP/AsuFTCrWebziX5qdeIFX8Cu
 RBcnqm7Dgt7lg+fyt/mj7g7/PVZEoe9AQ5hWoXmguR850/PmMuEDfHhY6pAfKU+r
 RokYiQR2pHDWFU9D2qf3ggEcI4suym1mmuMjx4TEs9318zpREHu9fGpzfJxlQgXa
 SUqQDZWElYyiF1nu8cxvH7wqeJLalKSiQBRtkM3w2oG8Nw1TgFxt/xiYHkiz/rkr
 U2sQrCabOCcVC/nlDAaWajBq18rzqhFk6QZEZsf9O4jsxy8Pbmkw2cqSp68KBMeB
 o50lRrguGhuejQg6g4AXZWGgUt5YnNL0CIHmTXp0KTnijGSAHnWUPf+qCOOR/sfn
 1roTNwCH8rjSfpEPKAhmiLRcPTVzy6IYxaT+J7KniCRAyHdIk2NBF3cHzDBy47uC
 pre1pIHnKkwBkxv/xkj8CHlfcpCjp8sXhW6FSXoX9On5SKiROnQUwiLoUjtnvRXe
 kQZRhtgJSKnLTtEEZ3XWh/UDyD2QJiwnm1E5SjXEa/mdDqgUmsVsPtz29f/xDKJA
 GZGNOCsIew0286C+tf5M88JpIXqpAiEYXA9vw5ZUqzxh3ArNuT0GJGxrlWxbqD8j
 tbvjHIja62IbCxM8dtZ9v0M4YFNU+VLHdKEREziK6RKS9Ek7rJmSh8128JNQhJ/X
 RjiUxdcbApvEunZInwB/
 =6Cw+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into staging

s390x/kvm: Features and fixes for 2.3

- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
  or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
  compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
  to reduce the number or page table levels
- Several fixes/cleanups

# gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150310:
  s390-ccw: rebuild BIOS
  s390/bios: Make the s390-ccw.img relocatable
  elf-loader: Provide the possibility to relocate s390 ELF files
  s390-ccw.img: Reinitialize guessing on reboot
  s390-ccw.img: Allow bigger ramdisk sizes or offsets
  s390x/kvm: passing max memory size to accelerator
  virtio-ccw: Convert to realize()
  virtio-s390: Convert to realize()
  virtio-s390: s390_virtio_device_init() can't fail, simplify
  s390x/kvm: enable the new SIGP handling in user space
  s390x/kvm: deliver SIGP RESTART directly if stopped
  s390x: add function to deliver restart irqs
  s390x/kvm: SIGP START is only applicable when STOPPED
  s390x/kvm: implement handling of new SIGP orders
  s390x/kvm: trace all SIGP orders
  s390x/kvm: helper to set the SIGP status in SigpInfo
  s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
  s390x/kvm: more details for SIGP handler with one destination vcpu
  s390x: introduce defines for SIGP condition codes
  synchronize Linux headers to 4.0-rc3

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 15:11:58 +00:00
Dominik Dingel a310b283e3 s390x/kvm: passing max memory size to accelerator
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to
do some optimizations based on the guest memory limit.

The guest memory limit is computed by the initial definition and with the notion of
hotplugged memory.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand f16d3f5874 s390x/kvm: enable the new SIGP handling in user space
All required SIGP handlers have been implemented in QEMU.

Let's enable the new sigp handling in user space if the kernel supports it.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-11-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand e3b7b57807 s390x/kvm: deliver SIGP RESTART directly if stopped
According to the PoP, a restart irq has to be delivered "without first honoring
any other pending interruptions", if a cpu is in the STOPPED state.

While it is hard to implement this case in kvm, it can easily be handled in qemu.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-10-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand 4f2b55d184 s390x/kvm: SIGP START is only applicable when STOPPED
In preparation for other CPU states, SIGP START will only start a VCPU if it is
in the STOPPED state.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-8-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 18ff949474 s390x/kvm: implement handling of new SIGP orders
This patch adds handling code for the following SIGP orders:
- SIGP SET ARCHITECTURE
- SIGP SET PREFIX
- SIGP STOP
- SIGP STOP AND STORE STATUS
- SIGP STORE STATUS AT ADDRESS

SIGP STOP (AND STORE STATUS) are the only orders that can stay pending forever
(and may only be interrupted by resets), so special care has to be taken about
them. Their status also has to be tracked within QEMU. This patch takes
care of migrating this status (e.g. if migration happens during a SIGP STOP).

Due to the BQL, only one VCPU is currently able to execute SIGP handlers at a
time. According to the PoP, BUSY should be returned if another SIGP order is
currently being executed on a VCPU. This can only be implemented when the BQL
does not protect all handlers. For now, all SIGP orders on all VCPUs will be
serialized, which will be okay for the first shot.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-7-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 56dba22b7d s390x/kvm: trace all SIGP orders
This patch adds tracing code for all SIGP orders (including the destination
vcpu and the resulting condition code).

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 36b5c84556 s390x/kvm: helper to set the SIGP status in SigpInfo
Whenever we set the SIGP status in the status register, we have to wipe out
the lower 4 bytes and keep the higher 4 bytes. Also the condition code will
always be set to STATUS_STORED.

Let's introduce the wrapper for SigpInfo, as this will avoid most duplicate
code in the future.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-5-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 22740e3fc0 s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
The parameter of the SIGP instruction will be neded in the future. Let's read it
out and store it in the struct sigp_info, so it can be passed to the sigp
handlers.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 6eb8f212d2 s390x/kvm: more details for SIGP handler with one destination vcpu
Whenever a sigp order is to be executed by a target vcpu, we use run_on_cpu().
As we have only one pointer to pass all data to these sigp handlers, let's
introduce the struct sigp_info and use it as a transport container.

All orders targeting a single vcpu are now  dispatched from a separate
handler. The destination vcpu is only valid for these orders and must not be
checked for SIGP SET ARCHITECTURE.

The sigp_info is filled with life in this new handler and used to pass the
information about the sigp order to the existing handlers. The cc is set
within these handlers.

Rename sigp_cpu_start() and sigp_cpu_restart() on the way to match the SIGP
order names (in order to avoid touching affected lines several times).

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 5172b780c5 s390x: introduce defines for SIGP condition codes
This patch introduces defines for the SIGP condition codes and replaces all
occurrences of numeral condition codes with the new defines.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
Gonglei 81b07353c5 Remove superfluous '\n' around error_report()
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:33 +03:00
Thomas Huth 653b080960 s390x/ioinst: Set condition code in ioinst_handle_tsch() handler
Move the setting of the condition code from kvm.c into the handler
function in ioinst.c itself, just like it has been done with the other
handlers already (TSCH has just not been changed yet since it is called
from a different dispatcher in kvm.c).

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18 09:37:15 +01:00
Thomas Huth 801cdd355f s390x/kvm: Add function for injecting pgm access exceptions
Program access exceptions are defined to deliver a translation exception
code in the low-core. Add a function trigger_access_exception() that
generates the proper program interrupt on both KVM and non-KVM systems
and switch the existing code to use it.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18 09:37:15 +01:00
Fan Zhang e91e972ccf s390x/ipl: drop reipl parameters on resets
Whenever a reboot initiated by the guest is done, the reipl parameters should
remain valid. The disk configured by the guest is to be used for
ipl'ing. External reboot/reset request (e.g. via virsh reset guest) should
completely reset the guest to the initial state, and therefore also reset the
reipl parameters, resulting in an ipl behaviour of the initially configured
guest. This could be an external kernel or a disk.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-13 16:14:09 +01:00
Christian Borntraeger 68540b1a1b s390x/kvm: unknown DIAGNOSE code should give a specification exception
As described in CP programming services an unimplemented DIAGNOSE
function should return a specification exception. Today we give the
guest an operation exception.
As both exception types are suppressing and Linux as a guest does not
care about the type of program check in its exception table handler
as long as both types have the same kind of error handling (nullifying,
terminating, suppressing etc.) this was unnoticed.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-02-03 13:42:40 +01:00
Thomas Huth 20dd25bb67 s390x/kvm: Fix diag-308 register decoding
Fix the decoding of the r1 register number in the diagnose 308 handler.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-02-03 13:42:40 +01:00
Frank Blaschka 9e03a0405d kvm: extend kvm_irqchip_add_msi_route to work on s390
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12 10:14:04 +01:00
Frank Blaschka 863f6f52b7 s390: implement pci instructions
This patch implements the s390 pci instructions in qemu. It allows
to access and drive pci devices attached to the s390 pci bus.
Because of platform constrains devices using IO BARs are not
supported. Also a device has to support MSI/MSI-X to run on s390.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12 10:14:04 +01:00
David Hildenbrand 59ac15326e s390x/kvm: avoid syscalls by syncing registers with kvm_run
We can avoid loads of syscalls when dropping to user space by storing the values
of more registers directly within kvm_run.

Support is added for:
- ARCH0: CPU timer, clock comparator, TOD programmable register,
         guest breaking-event register, program parameter
- PFAULT: pfault parameters (token, select, compare)

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12 10:14:04 +01:00
David Hildenbrand fdb78ec006 s390x/kvm: sync register support helper function
Let's unify the code to sync registers by moving the checks into a helper
function can_sync_regs().

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12 10:14:04 +01:00
Peter Maydell dfa9c2a0f4 - Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
 - small i386 patches
 - PCI SD host controller support
 - malloc/free cleanups from Markus (x86/scsi)
 - IvyBridge model
 - XSAVES support for KVM
 - initial patches from record/replay
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
 HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
 D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
 BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
 0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
 vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
 =ncys
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay

# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
  sdhci: Support SDHCI devices on PCI
  sdhci: Define SDHCI PCI ids
  sdhci: Add "sysbus" to sdhci QOM types and methods
  sdhci: Remove class "virtual" methods
  sdhci: Set a default frequency clock
  serial: only resample THR interrupt on rising edge of IER.THRI
  serial: update LSR on enabling/disabling FIFOs
  serial: clean up THRE/TEMT handling
  serial: reset thri_pending on IER writes with THRI=0
  linuxboot: fix loading old kernels
  kvm/apic: fix 2.2->2.1 migration
  target-i386: add Ivy Bridge CPU model
  target-i386: add f16c and rdrand to Haswell and Broadwell
  target-i386: add VME to all CPUs
  pc: add 2.3 machine types
  i386: do not cross the pages boundaries in replay mode
  cpus: make icount warp behave well with respect to stop/cont
  timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
  cpu-exec: invalidate nocache translation if they are interrupted
  icount: introduce cpu_get_icount_raw
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-15 16:43:42 +00:00
Christian Borntraeger e6eef7c221 valgrind/s390x: avoid false positives on KVM_SET_FPU ioctl
struct kvm_fpu contains an alignment padding on s390x. Let's use a
designated initializer to avoid false positives from valgrind/memcheck.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:01 +01:00
Eric Auger f41389ae3c KVM_CAP_IRQFD and KVM_CAP_IRQFD_RESAMPLE checks
Compute kvm_irqfds_allowed by checking the KVM_CAP_IRQFD extension.
Remove direct settings in architecture specific files.

Add a new kvm_resamplefds_allowed variable, initialized by
checking the KVM_CAP_IRQFD_RESAMPLE extension. Add a corresponding
kvm_resamplefds_enabled() function.

A special notice for s390 where KVM_CAP_IRQFD was not immediatly
advirtised when irqfd capability was introduced in the kernel.
KVM_CAP_IRQ_ROUTING was advertised instead.

This was fixed in "KVM: s390: announce irqfd capability",
ebc3226202d5956a5963185222982d435378b899 whereas irqfd support
was brought in 84223598778ba08041f4297fda485df83414d57e,
"KVM: s390: irq routing for adapter interrupts".  Both commits
first appear in 3.15 so there should not be any kernel
version impacted by this QEMU modification.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:01 +01:00
Christian Borntraeger dc622deb2d s390x/kvm: Fix compile error
commit a2b257d621 "memory: expose alignment used for allocating RAM
as MemoryRegion API" triggered a compile error on KVM/s390x.

Fix the prototype and the implementation of legacy_s390_alloc.

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26 12:11:27 +01:00
Igor Mammedov a2b257d621 memory: expose alignment used for allocating RAM as MemoryRegion API
introduce memory_region_get_alignment() that returns
underlying memory block alignment or 0 if it's not
relevant/implemented for backend.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-23 12:11:30 +02:00
Thomas Huth f0d4dc18ce s390x/kvm: Fix warning from sparse
When running "sparse" with the s390x kvm.c code, it complains that
"constant 0x00400f1d40330000 is so big it is long" - let's fix this
by appending a proper suffix.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-05 16:35:55 +01:00
Frank Blaschka 80765f0734 s390x/kvm: Fix opcode decoding for eb instruction handler
The second byte of the opcode is encoded in the lowest byte of the ipb
field, not the lowest byte of the ipa field.

Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2014-11-05 16:35:55 +01:00
David Hildenbrand 71dd7e69b3 s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESET
We need to synchronize registers after a reset has been performed. The
current code does that in qemu_system_reset(), load_normal_reset() and
modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET,
this needs to be done for the targeted vcpu as well, so let's call
cpu_synchronize_post_reset() in the respective handlers.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10 10:37:47 +02:00
David Hildenbrand 99607144a4 s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefs
This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and
CONFIG_USER_ONLY ifdefs in cpu.c.

In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a
dummy implementation - the two definitions are moved to the proper section in
cpu.h.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10 10:37:47 +02:00
David Hildenbrand c9e659c9ee s390x/kvm: propagate s390 cpu state to kvm
Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.

The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).

Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10 10:37:47 +02:00
David Hildenbrand eb24f7c689 s390x/kvm: proper use of the cpu states OPERATING and STOPPED
This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).

A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10 10:37:47 +02:00
Matthew Rosato 1def6656b6 sclp-s390: Add memory hotplug SCLPs
Add memory information to read SCP info and add handlers for
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage.

Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-09-01 09:25:32 +02:00
David Hildenbrand 6e6ad8db11 s390x/kvm: execute sigp orders on the target vcpu thread
All sigp orders that can result in ioctls on the target vcpu should be executed
on the associated vcpu thread.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-09-01 09:23:02 +02:00
Jason J. Herne 85ad6230b3 s390x/kvm: synchronize guest floating point registers
Add code to kvm_arch_get_registers and kvm_arch_put_registers to
save/restore floating point registers. This missing sync was
unnoticed until migration of userspace that uses fprs.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Update patch to latest upstream]
Cc: qemu-stable@nongnu.org
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-07-14 09:15:38 +02:00
Wenchao Xia 3a44969037 qapi event: convert GUEST_PANICKED
'monitor.h' is still included in target-s390x/kvm.c, since I have
no good way to verify whether other code need it on my x86 host.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Cornelia Huck bbd8bb8e32 s390x/kvm: inject via flic
Try to inject floating interrupts via the flic if it is available.
This allows us to inject the full range of floating interrupts.

Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-10 09:50:27 +02:00
Cornelia Huck de13d21614 s390x: cleanup interrupt injection
Remove the need for a cpu to inject a floating interrupt on kvm.

Acked-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-10 09:50:27 +02:00
Cornelia Huck 66ad0893f0 s390x/kvm: add alternative injection interface
Add kvm_s390_{vcpu,floating}_interrupt, which offer the possibility
to inject interrupts with larger payloads (when a kvm backend becomes
available).

Moreover, kvm_s390_floating_interrupt() does no longer have the bogus
requirement for a vcpu.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-10 09:50:27 +02:00
Cornelia Huck 79afc36d91 s390x: consolidate floating interrupts
Move the injection code for all floating interrupts to interrupt.c
and add a comment.

Also get rid of the #ifdef CONFIG_KVM for the service interrupt.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-10 09:50:27 +02:00
Thomas Huth 6449a41a4d s390x/kvm: Log unmanageable program interruptions
The kernel only drops to userspace if an endless program interrupt loop
has been detected. Let's print an error message in this case to inform
the user about the crash and stop the affected CPU with a panic event,
just like it is already done for the external interruption loop detection.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-06-10 09:50:27 +02:00