When IOMMU is enabled, we store virtqueue metadata as iova (though it
may has _phys suffix) and access them through dma helpers. Any
translation failures could be reported by IOMMU.
In this case, trying to validate iova against gpa won't work and will
cause a false error reporting. So this patch bypasses the ring
verification if IOMMU is enabled which is similar to the behavior
before 0ca1fd2d68 that calls vhost_memory_map() which is a nop when
IOMMU is enabled.
Fixes: 0ca1fd2d68 ("vhost: Simplify ring verification checks")
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CMSDK APB UART INTSTATUS register bits are all write-one-to-clear.
We were getting this correct for the TXO and RXO bits (which need
special casing because their state lives in the STATE register),
but had forgotten to handle the normal bits for RX and TX which
we do store in our s->intstatus field.
Perform the W1C operation on the bits in s->intstatus too.
Fixes: https://bugs.launchpad.net/qemu/+bug/1760262
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180410134203.17552-1-peter.maydell@linaro.org
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here's a rather late pull request with a handful of fixes for 2.12.
These have been blocked for some time, because I wasn't able to
complete my usual test set due to the SCSI problem fixed in 37c5174
"scsi-disk: Don't enlarge min_io_size to max_io_size".
Since we're in hard freeze, these are all bugfixes. Most are also
regressions, although in one case it's only a "regression" because a
longstanding bug has been exposed by a new machine type (sam460ex) in
the testcases. There are also a couple of sam460ex fixes that aren't
regressions since the board didn't exist before. On the flipside
though, they're low risk because they only touch board specific code
for a board that doesn't exist in any released version.
-----BEGIN PGP SIGNATURE-----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=VDFg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180410' into staging
ppc patch queue 2018-04-10
Here's a rather late pull request with a handful of fixes for 2.12.
These have been blocked for some time, because I wasn't able to
complete my usual test set due to the SCSI problem fixed in 37c5174
"scsi-disk: Don't enlarge min_io_size to max_io_size".
Since we're in hard freeze, these are all bugfixes. Most are also
regressions, although in one case it's only a "regression" because a
longstanding bug has been exposed by a new machine type (sam460ex) in
the testcases. There are also a couple of sam460ex fixes that aren't
regressions since the board didn't exist before. On the flipside
though, they're low risk because they only touch board specific code
for a board that doesn't exist in any released version.
# gpg: Signature made Tue 10 Apr 2018 08:13:52 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180410:
roms/u-boot-sam460ex: Change to qemu git mirror and update
sam460ex: Fix timer frequency and clock multipliers
tests/boot-serial: Test the sam460ex board
spapr: Initialize reserved areas list in FDT in H_CAS handler
target/ppc: Fix backwards migration of msr_mask
hw/misc/macio: Fix crash when listing device properties of macio device
target/ppc: Initialize lazy_tlb_flush correctly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASAN reported:
hw/block/pflash_cfi02.c:245:33: runtime error: index 82 out of bounds for type 'uint8_t [82]'
Since the 'cfi_len' member is not used, remove it to keep the code safer.
Cc: qemu-stable@nongnu.org
Reported-by: AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
* tcg: Fix guest state corruption when running 64-bit Arm
guests on a 32-bit host (especially when using icount)
* linux-user/signal.c: Ensure AArch64 signal frame isn't too small
* cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
* target/arm: Report unsupported MPU region sizes more clearly
* hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
* hw/arm/allwinner-a10: Do not use nd_table in instance_init function
* hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
* hw/sd/bcm2835_sdhost: Add tracepoints
* target-arm: Check undefined opcodes for SWP in A32 decoder
* hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
* hw/arm: Allow manually specified /psci node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cxN4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180410' into staging
target-arm queue:
* fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
* tcg: Fix guest state corruption when running 64-bit Arm
guests on a 32-bit host (especially when using icount)
* linux-user/signal.c: Ensure AArch64 signal frame isn't too small
* cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
* target/arm: Report unsupported MPU region sizes more clearly
* hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
* hw/arm/allwinner-a10: Do not use nd_table in instance_init function
* hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
* hw/sd/bcm2835_sdhost: Add tracepoints
* target-arm: Check undefined opcodes for SWP in A32 decoder
* hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
* hw/arm: Allow manually specified /psci node
# gpg: Signature made Tue 10 Apr 2018 13:16:12 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180410:
fpu: Fix rounding mode for floatN_to_uintM_round_to_zero
tcg: Introduce tcg_set_insn_start_param
linux-user/signal.c: Ensure AArch64 signal frame isn't too small
cpus.c: ensure running CPU recalculates icount deadlines on timer expiry
target/arm: Report unsupported MPU region sizes more clearly
hw/arm/fsl-imx: Fix introspection problem with fsl-imx6 and fsl-imx7
hw/arm/allwinner-a10: Do not use nd_table in instance_init function
hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
hw/sd/bcm2835_sdhost: Add tracepoints
target-arm: Check undefined opcodes for SWP in A32 decoder
hw/arm/integratorcp: Don't do things that could be fatal in the instance_init
hw/arm: Allow manually specified /psci node
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently exits unexpectedly when trying to introspect the fsl-imx6
and fsl-imx7 devices on systems with many SMP CPUs:
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'fsl,imx6'}}" \
| arm-softmmu/qemu-system-arm -M virt,accel=qtest -qmp stdio -smp 8
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
fsl,imx6: Only 4 CPUs are supported (8 requested)
And:
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'fsl,imx7'}}" \
| arm-softmmu/qemu-system-arm -M raspi2,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
fsl,imx7: Only 2 CPUs are supported (4 requested)
This happens because these devices are doing an exit() from their
instance_init function - which should never be done since instance_init
can be called at any time for device introspection! Fix it by moving
the deadly check into the realize() function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522908551-14885-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instance_init function of a device can be called at any time, even
if the device is not going to be used (i.e. not going to be realized).
So a instance_init function must not do things that could cause QEMU
to exit, like calling qemu_check_nic_model(&nd_table[0], ...) for example.
But this is what the instance_init function of the allwinner-a10 device
is currently doing - and this causes QEMU to quit unexpectedly when
you run the 'device-list-properties' QMP command for example:
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'allwinner-a10'}}" \
| arm-softmmu/qemu-system-arm -M mps2-an505,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
Unsupported NIC model: lan9118
... and QEMU quits after printing the last line (which should not happen
just because of running 'device-list-properties' here).
And with the cubieboard, this even causes QEMU to abort():
$ echo "{'execute':'qmp_capabilities'}"\
"{'execute':'device-list-properties',"\
" 'arguments':{'typename':'allwinner-a10'}}" \
| arm-softmmu/qemu-system-arm -M cubieboard,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{"return": {}}
Unexpected error in error_set_from_qdev_prop_error() at hw/core/qdev-properties.c:1095:
Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use
Aborted (core dumped)
To fix the problem we've got to move the offending code to the realize
function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1522862420-7484-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux bcm2835_sdhost driver doesn't work on QEMU, because our
model raises spurious data interrupts. Our function
bcm2835_sdhost_fifo_run() will flag an interrupt any time it is
called with s->datacnt == 0, even if the host hasn't actually issued
a data read or write command yet. This means that the driver gets a
spurious data interrupt as soon as it enables IRQs and then does
something else that causes us to call the fifo_run routine, like
writing to SDHCFG, and before it does the write to SDCMD to issue the
read. The driver's IRQ handler then spins forever complaining that
there's no data and the SD controller isn't in a state where there's
going to be any data:
[ 41.040738] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
[ 41.042059] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
(continues forever).
Move the interrupt flag setting to more plausible places:
* for BUSY, raise this as soon as a BUSYWAIT command has executed
* for DATA, raise this when the FIFO has any space free (for a write)
or any data in it (for a read)
* for BLOCK, raise this when the data count is 0 and we've
actually done some reading or writing
This is pure guesswork since the documentation for this hardware is
not public, but it is sufficient to get the Linux bcm2835_sdhost
driver to work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-3-peter.maydell@linaro.org
Add some tracepoints to the bcm2835_sdhost driver, to assist
debugging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-2-peter.maydell@linaro.org
Change the code to avoid exiting QEMU if user provided DTB contains
manually specified /psci node and skip any /psci related fixups
instead.
Fixes: 4cbca7d9b4 ("hw/arm: Move virt's PSCI DT fixup code to
arm/boot.c")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Message-id: 20180402205654.14572-1-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJazDEhAAoJEO8Ells5jWIRwNcH/jfvFCOg5SVefHiuk4+6b3mM
3YP9vBFGx0gJREelYBriCWuMUELem79rGWskQvhNe43/qkFktlR/bRbB+QOIcPmo
ZoDHNj8AQXTkCbXnctsG4ygPmAuK67zft9yNMRQlOH3OUnfFfEq+aNL9tXenzgrS
oLfVApdtBk67ZdwWOrEz+43YKB/0FyvFoHFdABvPLRFtWlKLtGMgoYLjGdjxywMK
LpHkKm+Uw0xW+Y4PII1yEN7ke3Nx9Gw8SWWegTPZlJ+hPMvtF8nt3uibD38YqsKg
XfuCWDSeJ8LIQNUdG4K5g5dIES2NaEIDeENatWlvELgP7HdlQSQ0HbJFoCUHmOk=
=fuVG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 10 Apr 2018 04:36:01 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000: Old machine types, turn new subsection off
e1000: Choose which set of props to migrate
e1000: Migrate props via a temporary structure
e1000: wire new subsection to property
e1000: Dupe offload data on reading old stream
e1000: Convert v3 fields to subsection
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we're using the subsection we migrate both
the 'props' and 'tso_props' data; when we're not using
the subsection (to migrate to 2.11 or old machine types) we've
got to choose what to migrate in the main structure.
If we're using the subsection migrate 'props' in the main structure.
If we're not using the subsection then migrate the last one
that changed, which gives behaviour similar to the old behaviour.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Swing the tx.props out via a temporary structure, so in future patches
we can select what we're going to send.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Wire the new subsection from the previous commit to a property
so we can turn it off easily.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Old QEMUs only had one set of offload data; when we only receive
one lot, dupe the received data - that should give us about the
same bug level as the old version.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A bunch of new TSO fields were introduced by d62644b4 and this bumped
the VMState version; however it's easier for those trying to keep
backwards migration compatibility if these fields are added in a
subsection instead.
Move the new fields to a subsection.
Since this was added after 2.11, this change will only affect
compatbility with 2.12-rc0.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We only emulate timer running at CPU frequency which is what most
guests expect so set the frequency to match real hardware. This also
allows setting clock multipliers which caused slowdown previously due
to wrong timer frequency.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the device tree produced by the H_CAS handler has no
reserved map initialized at all which is not correct as at least one
empty record is required to be present as a marker of the end.
This does not cause problems now as the only consumer is SLOF which
does not look at the reserved map area.
However when DTC's "Improve libfdt's memory safety" changeset hits
the QEMU upstream, there will be errors reported and crashes observed.
This fixes the problem by adding an empty entry to the reserved map,
just like create_device_tree() does already.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The macio-newworld device can currently be used to abort QEMU unexpectedly:
$ ppc-softmmu/qemu-system-ppc -S -M ref405ep,accel=qtest -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 11, "major": 2},
"package": "build-all"}, "capabilities": []}}
{ 'execute': 'qmp_capabilities' }
{"return": {}}
{ 'execute': 'device-list-properties',
'arguments': {'typename': 'macio-newworld'}}
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222:
Device 'serial0' is in use
Aborted (core dumped)
qdev properties should be set during realize(), not during instance_init(),
so move the related code there to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-Id: <20180328133435.20112-1-linzhecheng@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When migrating from a pre-2.9 QEMU, no clock_is_reliable flag is
transferred. We should assume that the source host has an unreliable
KVM_GET_CLOCK, rather than using whatever was determined locally, to
ensure that any drift from the TSC-based value calculated by the guest
is corrected.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Message-Id: <20180406053406.774-1-mike@very.puzzling.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU fails when used with the following command line:
./ppc64-softmmu/qemu-system-ppc64 -S -machine 40p -device i82374
qemu-system-ppc64: hw/isa/isa-bus.c:110: isa_bus_dma: Assertion `!bus->dma[0] && !bus->dma[1]' failed.
The 40p machine type already creates the device i82374. If specified in the
command line, it will try to create it again, hence generating the error. The
function isa_bus_dma() isn't supposed to be called twice for the same bus.
Check the bus doesn't already have a DMA controller registered before creating
the device.
Fixes: https://bugs.launchpad.net/qemu/+bug/1721224
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180326153441.32641-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU SCSI code makes assumptions about how the PROTECT and BYTCHK
works in the protocol, denying support for PI (Protection
Information) in case the guest OS requests it. However, in SCSI versions 2
and older, there is no PI concept in the protocol.
This means that when dealing with such devices:
- there is no PROTECT bit in byte 5 of the standard INQUIRY response. The
whole byte is marked as "Reserved";
- there is no RDPROTECT in byte 2 of READ. We have 'Logical Unit Number'
in this field instead;
- there is no VRPROTECT in byte 2 of VERIFY. We have 'Logical Unit Number'
in this field instead. This also means that the BYTCHK bit in this case
is not related to PI.
Since QEMU does not consider these changes, a SCSI passthrough using
a SCSI-2 device will not work. It will mistake these fields with
PI information and return Illegal Request SCSI SENSE thinking
that the driver is asking for PI support.
This patch fixes it by adding a new attribute called 'scsi_version'
that is read from the standard INQUIRY response of passthrough
devices. This allows for a version verification before applying
conditions related to PI that doesn't apply for older versions.
Reported-by: Dac Nguyen <dacng@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-Id: <20180327211451.14647-1-danielhb@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to have different behavior for passthrough devices
depending on the SCSI version they expose. To prepare for that,
allow the user of emulated devices to specify the desired SCSI
level, and adjust the emulation according to the property value.
The next patch will set the level for scsi-block and scsi-generic
devices.
Based on a patch by Daniel Henrique Barboza
<danielhb@linux.vnet.ibm.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some backends report big max_io_sectors. Making min_io_size the same
value in this case will make it impossible for guest to align memory,
therefore the disk may not be usable at all.
Do not enlarge them when they are zero.
Reported-by: David Gibson <dgibson@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180327164141.19075-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
My rework of section adding combines overlapping or adjoining regions,
but checks they're actually the same underlying RAM block.
Fix the case where two blocks adjoin but don't overlap; that new region
should get added (but not combined), but my previous patch was disallowing it.
Fixes: c1ece84e7c
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without a dedicated protocol feature, QEMU cannot know whether
the backend can handle VHOST_USER_SET_CONFIG and
VHOST_USER_GET_CONFIG messages.
This patch adds a protocol feature that is only advertised by
QEMU if the device implements the config ops. Vhost user init
fails if the device support the feature but the backend doesn't.
The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
requests if the protocol feature has been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
As soon as vhost-user init is done, the backend may send
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG, so let's set the
notification callback before it.
Also, it will be used to know whether the device supports
the config feature to advertize it or not.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
If the subchannel is already attached or if vfio_get_device() fails, the
code jumps to the 'out_device_err' label and doesn't free the string it
has just allocated.
The code should be reworked so that vcdev->vdev.name only gets set when
the device has been attached, and freed when it is about to be detached.
This could be achieved with the addition of a vfio_ccw_get_device()
function that would be the counterpart of vfio_put_device(). But this is
a more elaborate cleanup that should be done in a follow-up. For now,
let's just add calls to g_free() on the buggy error paths.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152311222681.203086.8874800175539040298.stgit@bahia>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Operating systems may request an IPL from a virtio-scsi device
by specifying an IPL parameter type of CCW. In this case QEMU
won't set up the IPLB correctly. The BIOS will still detect
it's a SCSI device to boot from, but it will now have to search
for the first LUN and attempt to boot from there.
However this may not be the original boot LUN if there's more than
one SCSI disk attached to the HBA.
With this change QEMU will detect that the request is for a
SCSI device and will rebuild the initial IPL parameter info
if it's the SCSI device used for the first boot. In consequence
the BIOS can use the boot LUN from the IPL information block.
In case a different SCSI device has been set, the BIOS will find
and use the first available LUN.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-3-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Splitting out the the CCW device extraction allows reuse.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 567b5b309a ("vfio/pci: Relax DMA map errors for MMIO regions")
added an error message if a passed memory section address or size
is not aligned to the page size and thus cannot be DMA mapped.
This patch fixes the trace by printing the region name and the
memory region section offset within the address space (instead of
offset_within_region).
We also turn the error_report into a trace event. Indeed, In some
cases, the traces can be confusing to non expert end-users and
let think the use case does not work (whereas it works as before).
This is the case where a BAR is successively mapped at different
GPAs and its sections are not compatible with dma map. The listener
is called several times and traces are issued for each intermediate
mapping. The end-user cannot easily match those GPAs against the
final GPA output by lscpi. So let's keep those information to
informed users. In mid term, the plan is to advise the user about
BAR relocation relevance.
Fixes: 567b5b309a ("vfio/pci: Relax DMA map errors for MMIO regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
Fixes: 3c4e9baacf
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152231460685.69730.14860451936216690693.stgit@bahia.lan>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Section 5.5.3.2.2 of the CRB specs states that use of the TPM
through the localty control method must first be requested,
otherwise the command will be dropped.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reset the Granted flag when relinquishing a locality.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit ef0e64a983 "ide: pass IDEState to trim AIO callback" changed the
IDE trim callback from using a BlockBackend to an IDEState but forgot to update
the dma_blk_io() call in hw/ide/macio.c accordingly.
Without this fix qemu-system-ppc segfaults when issuing an IDE trim command on
any of the PPC Mac machines (easily triggered by running the Debian installer).
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20180223184700.28854-1-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
commit 947858b0 "ide: abort TRIM operation for invalid range"
is incorrect for macio; just ide_dma_error() without doing a callback
is not enough for that errorpath.
Instead, pass -EINVAL to the callback and handle it there
(see related motivation for read/write in 58ac32113).
It will however catch possible EINVAL from the block layer too.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1520010495-58172-1-git-send-email-anton.nefedov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Thomas.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJauOmSAAoJEL/70l94x66DwA4IAIfXUyWSDzAMTc19N/gY4eKB
cptfJas1CmfrMU+EBIVZoiVdYF1H5qvctxVSaCXL3y7XNfwrjfDoiplfbi9rTSKb
pW59bqIf7Y+ViOYDYHdbxKMcvWxIaiWKfpzWkncy+aeqObs620VSCbVmqVsQsKQu
1OHWrTlgNAP4aqPy9gZ6O1YXBDxTCIKW9N+QIdho5RqB1uPFkjBJcxlF04ydF9S7
kIgblBsosljTOk03I2hf6KKtfXfRXctgE/RYyE8SW3dy+CQWfiGjkE/z17ABBjK2
g7Rex6S9NA/+fDXO+2MAYnx6iBA9Dkxt2CcWWDjGwg+nXS4+B/OoF4MhRwV6N2g=
=5hGp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Miscellaenous bugfixes, including crash fixes from Alexey, Peter M. and
Thomas.
# gpg: Signature made Mon 26 Mar 2018 13:37:38 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-pr-helper: Actually allow users to specify pidfile
chardev/char-fe: Allow NULL chardev in qemu_chr_fe_init()
iothread: fix breakage on windows
scsi: turn "is this a SCSI device?" into a conditional hint
chardev-socket: remove useless if
tcg: Really fix cpu_io_recompile
vhost-user-test: add back memfd check
vhost-user-test: do not hang if chardev creation failed
scripts/device-crash-test: Remove fixed isapc-with-iommu entry
hw/audio: Fix crashes when devices are used on ISA bus without DMA
fdc: Exit if ISA controller does not support DMA
hw/net/can: Fix segfaults when using the devices without bus
WHPX improve vcpu_post_run perf
WHPX fix WHvSetPartitionProperty in PropertyCode
WHPX fix WHvGetCapability out WrittenSizeInBytes
scripts/get_maintainer.pl: Print proper error message for missing $file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the user does not have permissions to send ioctls to the device (due to
SELinux or cgroups, for example), the output can look like
qemu-kvm: -device scsi-block,drive=disk: cannot get SG_IO version number:
Operation not permitted. Is this a SCSI device?
but this is confusing because the ioctl was blocked _before_ the device
even received the SG_GET_VERSION_NUM ioctl. Therefore, for EPERM errors
the suggestion should be eliminated. To make that simpler, change the
code to use error_append_hint.
Reported-by: Ala Hino <ahino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cs4231a, gus and sb16 sound cards crash QEMU when the user tries
to instantiate them on a machine with DMA-less ISA bus (for example
with "qemu-system-mips64el -M mips -device sb16"). Add proper checks
to the realize functions to avoid the crashes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
