No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
The win2qemu[] is supposed to be the conversion table to convert between
STORAGE_BUS_TYPE in Windows SDK and GuestDiskBusType in qga.
But it was incorrectly written that it forces to set a GuestDiskBusType
value to STORAGE_BUS_TYPE, which generates an enum conversion warning in clang.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003650.10137-1-driver1998@foxmail.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify the code around qmp_dispatch():
- rely on qmp_dispatch/check_obj() for message checking
- have a single send_response() point
- constify send_response() argument
It changes a couple of error messages:
* When @req isn't a dictionary, from
Invalid JSON syntax
to
QMP input must be a JSON object
* When @req lacks member "execute", from
this feature or command is not currently supported
to
QMP input lacks member 'execute'
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The Windows QEMU guest agent erroneously tries to collect PCI information
directly from the physical drive. However, windows stores SCSI/IDE information
with the drive and PCI information with the underlying storage controller
This changes get_pci_info to use the physical drive's underlying storage
controller to get PCI information.
* Additionally Fixes incorrect size being passed to DeviceIoControl
when getting volume extents. Can occasionally crash the guest agent
Signed-off-by: Matt Hines <mhines@scalecomputing.com>
*fix up some checkpatch warnings
*fix domain reporting and add some sanity checks for debug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 7be41675f7 set -std=gnu99 for C code via QEMU_CFLAGS. Currently
we generate a "custom" QEMU_CXXFLAGS for VSS DLL C++ build by
filtering out some options from QEMU_CFLAGS and adding some others.
Since we don't filter out -std=gnu99 currently this breaks builds when
VSS support is enabled.
We could keep the existing approach, filter out -std=gnu99 from
QEMU_CFLAGS, and add -std=gnu++98, like configure currently does for
QEMU_CXXFLAGS, but as it turns out our resulting QEMU_CXXFLAGS would
be exactly what configure already generates, just with these filtered
out:
-fstack-protector-all -fstack-protector-strong
and these added:
-Wno-unknown-pragmas -Wno-delete-non-virtual-dtor
So fix the issue by re-using configure-generated QEMU_CXXFLAGS and
just handling these specific changes.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 3ebee3b191 defined assert() as g_assert(), but when we build
the VSS DLL component of QGA (to handle fsfreeze) we do not include
glib, which results in breakage when building with VSS support enabled.
Fix this by including glib (along with the -lintl and -lws2_32
dependencies it brings).
Since the VSS DLL is built statically, this introduces an additional
dependency on static glib and supporting libs for the mingw environment
(possibly why we didn't include glib originally), but VSS support
already has very specific prerequisites so it shouldn't affect too many
build environments.
Since the VSS DLL code does use qemu/osdep.h, this should also help
avoid future breakages and possibly allow for some clean ups in current
VSS code.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since Windows Server 2016, Microsoft stopped upgrading the major and minor
versions of their new Windows Server product, so, the current functionality
of checking major and minor version numbers to determine the Windows Server
version wont work as expected.
The implemented solution here is to use the build number in addition to the
major and minor version numbers of the product to determine the Windows
Server product version.
The final build number of Windows Server 2016 is 14939, and
the final build number of Windows Server 2019 is 17764, so any Windows
Server product that has the major version of 10 and minor version of 0
with a build number lower or equal to 14939 will resemble 2016 and if the
build number is lower or equal to 17763 will resemble 2019.
Reference:
https://techcommunity.microsoft.com/t5/Windows-Server-Insiders/Windows-Server-2019-version-info/m-p/293112/highlight/true#M859
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Building QGA for XP seems possible so far: the dependency on
libqemuutil.a implies building qemu-thread-win32.c, which requires
Vista API since commit 12f8def0 (v2.9). But qemu-thread isn't being
used in QGA, the resulting binary may still work on XP. XP is no
longer supported for the past 4.5y, it's time to drop support for it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both qemu & qga build with Vista API by default already, by defining
_WIN32_WINNT 0x0600. Set it globally in osdep.h instead.
This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem
to be really useful these days.
(see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates the descriptions of 'guest-suspend-ram' and
'guest-suspend-hybrid' to mention that both commands relies now
on the proper support for wake up from suspend, retrieved by the
'wakeup-suspend-support' attribute of the 'query-current-machine'
QMP command.
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20181205194701.17836-3-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The guest-agent-core.h header was missing the usual guards
against multiple inclusion; add them.
(Spotted by lgtm.com's static analyzer.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduced in commit b1ba8890e6, vol_h
handle should be closed, and "out" cleanup should be done after
DeviceIoControl() fails.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently whenever the qemu-ga's service doesn't find the virtio-serial
the run_agent() loops in a QGA_RETRY_INTERVAL (default 5 seconds)
intervals and try to restart the qemu-ga which causes a synchronous loop.
Changed to wait and listen for the serial events by registering for
notifications a proper serial event handler that deals with events:
DBT_DEVICEARRIVAL indicates that the device has been inserted and
is available
DBT_DEVICEREMOVECOMPLETE indicates that the devive has been removed
Which allow us to determine when the channel path is available for the
qemu-ga to restart.
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Useful in general, but especially now that errors might occur more
frequently with --retry-path set.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's nicer from a management perspective that the agent can survive
hotplug/unplug of the channel device, or be started prior to the
installation of the channel device's driver without and still be able
to resume normal function afterward. On linux there are alternatives
like systemd to support this, but on w32 --retry-path is the only
option so it makes sense to set it by default when installed as a
w32 service.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This adds an option to instruct the agent to periodically attempt
re-opening the communication channel after a channel error has
occurred. The main use-case for this is providing an OS-independent
way of allowing the agent to survive situations like hotplug/unplug of
the communication channel, or initial guest set up where the agent may
be installed/started prior to the installation of the channel device's
driver.
There are nicer ways of implementing this functionality via things
like systemd services, but this option is useful for platforms like
*BSD/w32.
Currently a channel error will result in the GSource for that channel
being removed from the GMainLoop, but the main loop continuing to run.
That behavior results in a dead loop when --retry-path isn't set, and
prevents us from knowing when to attempt re-opening the channel when
it is set, so we also force the loop to exit as part of this patch.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eventually we want a w32 service to be able to restart the qga main
loop from within service_main(). To allow for this we move service
handling out of run_agent() such that service_main() calls
run_agent() instead of the reverse.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For w32 services we rely on the global GAState to access resources
associated with the agent within service_main(). Currently this is
sufficient for starting the agent since we open the channel once prior
to calling service_main(), and simply start the GMainLoop to start the
agent from within service_main().
Eventually we want to be able to also [re-]open the communication
channel from within service_main(), which requires access to
config/socket_activation variables, so we hang them off GAState in
preparation for that.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
*dont move GAConfig struct, just the typedef
*fix build bisect for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch better separates the init/cleanup routines out into
separate functions to make the start-up procedure a bit easier to
follow. This will be useful when we eventually break out the actual
start/stop of the agent's main loop into separates routines that
can be called multiple times after the init phase.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It was not obvious what exactly the cryptic string copying does to the
GUID. This change makes the intent clearer.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Report device UNC of the disk. It is reported as "\\.\PhysicalDriveX".
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Probe the volume for disk extents and return list of all disks.
Originally only first disk of composite volume was returned.
Note that the patch changes get_pci_info() from one state of brokenness
into a different state of brokenness. In other words it still does not do
what it's supposed to do (see comment in code). If anyone knows how to
fix it, please step in.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Refactor building of disk info into a function that builds the list and
a function that returns infor for single disk. This will be used in
future commit that will handle multi-disk volumes.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
*coding style fix-ups (declarations at beginning of block)
*improve readability for user-visible errors
*cover additional edge-cases with debug statements
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Refactor code that queries bus type to be more generic. The function
get_disk_bus_type() has been renamed to build_guest_disk_info().
Following commit(s) will extend this function.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The windows code generaly lacks debug information (compared to posix
code). This patch adds some related to HW info in guest-get-fsinfo
command.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The call to SetupDiGetDeviceRegistryProperty might fail because the
value doesn't exist in the registry, in this case we shouldn't exit from
the loop but instead continue to look for other available values in the
registry and set this value as unavailable (-1).
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
*squash in fix for when get_pci_info() returns NULL pci_controller field
*fix handling for error_set() cases in get_pci_info(), not just NULL return
*force all -1 PCI addr fields if any single one of them isn't found
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The fsinfo command is currently implemented for Windows only and it's disk
parameter can be enabled by adding the define "CONFIG_QGA_NTDDSCSI" to the qga
code. When enabled and executed the qemu-ga crashed with the following message:
------------------------------------------------
File qapi/qapi-visit-core.c, Line 49
Expression: !(v->type & VISITOR_OUTPUT) || *obj)
------------------------------------------------
After some digging, turns out that the GuestPCIAddress is null and the
qapi visitor doesn't like that, so we can always allocate it instead and
initiate all it's members to -1.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Report device node of the disk on Linux (e.g. "/dev/sda2").
Requirs libudev.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add reporting of disk serial number on Linux guests. The feature depends
on libudev.
Example:
{
"name": "dm-2",
"mountpoint": "/",
...
"disk": [
{
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
...
}
],
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If VM has VCPUs plugged sparselly (for example a VM started with
3 VCPUs (cpu0, cpu1 and cpu2) and then cpu1 was hotunplugged so
only cpu0 and cpu2 are present), QGA will rise a error
error: internal error: unable to execute QEMU agent command 'guest-get-vcpus':
open("/sys/devices/system/cpu/cpu1/"): No such file or directory
when
virsh vcpucount FOO --guest
is executed.
Fix it by ignoring non present CPUs when fetching CPUs status from sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch add support for freeze specified fs.
The valid mountpoints list member are [1]:
The path of a mounted folder, for example, Y:\MountX\
A drive letter, for example, D:\
A volume GUID path of the form \\?\Volume{GUID}\,
where GUID identifies the volume
A UNC path that specifies a remote file share,
for example, \\Clusterx\Share1\
[1] https://docs.microsoft.com/en-us/windows/desktop/api/vsbackup/nf-vsbackup-ivssbackupcomponents-addtosnapshotset
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, the win32 port of QEMU Guest Agent does not properly handle Unicode
paths. The JSON decoder produces a valid UTF-8 path string, but this is passed
directly to CreateFileA, which is expecting an ANSI string and not UTF-8. This
leads to mangled filenames.
This patch follows the example of qmp_guest_set_user_password() and uses
g_utf8_to_utf16() to convert the string to UTF-16 and calls CreateFileW()
explicitly.
Signed-off-by: Jonathon Reinhart <jreinhart@cc-sw.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.
When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The defrag.exe tool which is used for executing the fstrim command
on Windows doesn't support retrim for OSes lower than Win8. This
commit handles this case and returns a suitable error.
Output of fstrim before this commit:
{"execute":"guest-fstrim"}
{"return": {"paths": [{"path": "C:\\", "error": "An invalid command line option
was specified. (0x89000008)"}, {"path": "F:\\", "error": "An invalid command
line option was specified. (0x89000008)"}, {"path": "S:\\", "error": "An
invalid command line option was specified. (0x89000008)"}]}}
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1594113
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
* use alternative version query code proposed by Sameeh
* fix up version check logic
* avoid CamelCase variable names when possible
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The file descriptor for /sys/power/state was never closed. Reported
by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'driver' is leaked when the loop is not broken.
Leak introduced by commit 743c71d03c,
spotted by ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
By using the more specific type, we get fewer downcasts. The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
bios_support_mode verifies if the guest has support for a certain
suspend mode but it doesn't inform back which suspend tool
provides it. The caller, guest_suspend, executes all suspend
strategies in order again.
After adding systemd suspend support, bios_support_mode now will
verify for support for systemd, then pmutils, then Linux sys state
file. In a worst case scenario where both systemd and pmutils isn't
supported but Linux sys state is:
- bios_supports_mode will check for systemd, then pmutils, then
Linux sys state. It will tell guest_suspend that there is support,
but it will not tell who provides it;
- guest_suspend will try to execute (and fail) systemd suspend,
then pmutils suspend, to only then use the Linux sys suspend.
The time spent executing systemd and pmutils suspend was wasted
and could be avoided, but only bios_support_mode knew it but
didn't inform it back.
A quicker approach is to nuke bios_supports_mode and control
whether we found support at all with a bool flag inside
guest_suspend. guest_suspend will search for suspend support
and execute it as soon as possible. If the a given suspend
mechanism fails, continue to the next. If no suspend
support is found, the "not supported" message is still being
sent back to the user.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
pmutils isn't being supported by newer OSes like Fedora 27
or Mint. This means that the only suspend option QGA offers
for these guests are writing directly into the Linux sys state
file. This also means that QGA also loses the ability to do
hybrid suspend in those guests - this suspend mode is only
available when using pmutils.
Newer guests can use systemd facilities to do all the suspend
types QGA supports. The mapping in comparison with pmutils is:
- pm-hibernate -> systemctl hibernate
- pm-suspend -> systemctl suspend
- pm-suspend-hybrid -> systemctl hybrid-sleep
To discover whether systemd supports these functions, we inspect
the status of the services that implements them.
With this patch, we can offer hybrid suspend again for newer
guests that do not have pmutils support anymore.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is a cleanup of the resulting code after detaching
pmutils and Linux sys state file logic:
- remove the SUSPEND_MODE_* macros and use an enumeration
instead. At the same time, drop the switch statements
at the start of each function and use the enumeration
index to get the right binary/argument;
- create a new function called run_process_child(). This
function uses g_spawn_sync() to execute a shell command,
returning the exit code. This is a common operation in the
pmutils functions and will be used in the systemd implementation
as well, so this function will avoid code repetition.
There are more places inside commands-posix.c where this new
run_process_child function can also be used, but one step
at a time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
*check/propagate local_err before setting errp directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Following the same logic of the previous patch, let's also
decouple the suspend logic from guest_suspend into specialized
functions, one for each strategy we support at this moment.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In bios_supports_mode there is a verification to assert if
the chosen suspend mode is supported by the pmutils tools and,
if not, we see if the Linux sys state files supports it.
This verification is done in the same function, one after
the other, and it works for now. But, when adding a new
suspend mechanism that will not necessarily follow the same
return 0 or 1 logic of pmutils, this code will be hard
to deal with.
This patch decouple the two existing logics into their own
functions, pmutils_supports_mode and linux_sys_state_supports_mode,
which in turn are used inside bios_support_mode. The existing
logic is kept but now it's easier to extend it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To be able to add new suspend mechanisms we need to detach
the existing QMP functions from the current implementation
specifics.
At this moment we have functions such as qmp_guest_suspend_ram
calling bios_suspend_mode and guest_suspend passing the
pmutils command and arguments as parameters. This patch
removes this logic from the QMP functions, moving them to
the respective functions that will have to deal with which
binary to use.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Iterate over the PCI bridges to lookup the PCI device associated with
the block device.
This allows to lookup the driver under the following syspath:
/sys/devices/pci0000:00/0000:00:02.2/0000:03:00.0/virtio2/block/vda/vda3
It also works with an "old-style" Q35 libvirt hierarchy: root complex
-> DMI-PCI bridge -> PCI-PCI bridge -> virtio controller, ex:
/sys/devices/pci0000:00/0000:00:03.0/0000:01:01.0/0000:02:01.0/virtio1/block/vda/vda3
The setup can be reproduced with the following qemu command line
(Thanks Marcel for help):
qemu-system-x86_64 -M q35 \
-device i82801b11-bridge,id=dmi2pci_bridge,bus=pcie.0
-device pci-bridge,id=pci_bridge,bus=dmi2pci_bridge,addr=0x1,chassis_nr=1
-device virtio-blk-pci,scsi=off,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,bus=pci_bridge,addr=0x1
For consistency with other syspath-related debug messages, replace a
\"%s\" in the message with '%s'.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Issue: When upgrading qemu-ga using the msi from an old version
to a newer one, the upgrade is not allowed by the msi
showing this error message "Another version of this product
is already installed."
BZ# 1536331: https://bugzilla.redhat.com/show_bug.cgi?id=1536331
Fix: For the upgrade to be allowed by the msi the WiX file must
provide three things:
1. Changing product's Id. (assigning it to "*")
2. Constant product's UpgradeId. (exists)
3. Changing version. (exists)
Reference: http://wixtoolset.org/documentation/manual/v3/howtos/updates/major_upgrade.html
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The documentation for kernel-version and kernel-release on Windows was
swapped.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch adds support for getting the usage of
windows driver path.
The usage of fs stored as used_bytes and total_bytes.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch adds support for getting the usage of mounted
filesystem.
The usage of fs stored as used_bytes and total_bytes.
It's very useful when we try to monitor guest's filesystem.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While reading file content via 'guest-file-read' command,
'qmp_guest_file_read' routine allocates buffer of count+1
bytes. It could overflow for large values of 'count'.
Add check to avoid it.
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If we set mountpoints to qmp_guest_fsfreeze_freeze_list,
we may got nothing to freeze as all mountpoints are
not valid.
So call ga_unset_frozen in this senario.
Also, if we return 0 frozen fs, there is no need to call
guest-fsfreeze-thaw.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-7: 2.50.3
Debian (Stretch): 2.50.3
Debian (Jessie): 2.42.1
OpenBSD (Ports): 2.54.3
FreeBSD (Ports): 2.50.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.42 is a reasonable target.
The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.
Docker jobs that not longer satisfy this new min version are removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-18-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
When listening on unix/tcp sockets there was optional code that would update
the original SocketAddress struct with the info about the actual address that
was listened on. Since the conversion of everything to QIOChannelSocket, no
remaining caller made use of this feature. It has been replaced with the ability
to query the listen address after the fact using the function
qio_channel_socket_get_local_address. This is a better model when the input
address can result in listening on multiple distinct sockets.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171212111219.32601-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The data obtained by GetIfEntry is 32 bits, and it may overflow. Thus
using GetIfEntry2 instead of GetIfEntry.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
*avoid CamelCase variable names
*update field names for MIB_IFROW -> MIB_IF_ROW2
*dynamically probe for GetIfIndex2 to deal with older OSs
*check return value from get_interface_index
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In one case we misconstrue a BOOL return as an HRESULT, and in the
other case we don't check the BOOL return from LookupAccountSidW()
before extracting the HRESULT from GetLastError(). Both can lead to
getNameByStringSID() misreporting an error.
Reported-by: Chen Hanxiao <chenhanxiao@gmail.com>
Suggested-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
we can get the network interface statistics inside a virtual machine by
guest-network-get-interfaces command. it is very useful for us tomonitor
and analyze network traffic.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
* don't rely on sizeof(wchar[]) for wchar[] indexing
* avoid camelCase variable names
* fix up getline() usage
* condensed commit subject line
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At the moment, Windows libraries don't provide a way to access
RTC, so, a workaround is to use the Windows w32tm command to
resync the time.
Related bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1183874
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When VM is in a heavy IO, if the command "guest-fsfreeze-freeze"
is executed, VSS may timeout when trying to hold writes.
Inside guest, Event ID 12298(VSS_ERROR_HOLD_WRITES_TIMEOUT)
is logged in the Event Viewer.
At that time, if we call AbortBackup, qga may hang forever.
This patch will solve this issue.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the package version information (useful for detecting
builds from git or downstream backports), and the copyright notice.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170803163353.19558-4-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add test for guest-get-osinfo command.
Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If
the variable is defined it is interpreted as path to the os-release file
and it is parsed instead of the default paths.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* move declarations to beginning of functions
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-get-osinfo' command for reporting basic information of
the guest operating system. This includes machine architecture,
version and release of the kernel and several fields from os-release
file if it is present (as defined in [1]).
[1] https://www.freedesktop.org/software/systemd/man/os-release.html
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
* moved declarations to beginning of functions
* dropped unecessary initialization of struct utsname
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In the first line of run_agent,it has set ga_state = s,don't need
set ga_state = s again behind.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 161a56a906 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
glib depends on libpcre which was not shipped with the MSI, thus
starting of the qemu-ga.exe failed with the respective error message.
Tell WIXL to ship this library with the MSI to avoid this problem.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
CC: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1357789
Replace hardcoded user and group names ("Administrators", "SYSTEM") with the ones acquired from system. Windows uses localized strings for these names and it may cause the installation to fail.
Windows has Well-known SIDs for "Administrators" group and "SYSTEM" user so they were used to identify required users and groups.
Well-known SIDs: https://support.microsoft.com/en-us/help/243330/well-known-security-identifiers-in-windows-operating-systems
Signed-off-by: Daniel Rempel <daniel@daynix.com>
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The caller of SetupDiGetClassDevs must delete the returned device information
set when it is no longer needed by calling SetupDiDestroyDeviceInfoList.
Signed-off-by: Li Ping <li.ping288@zte.com.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no need to duplicate a fixed string.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Markus Armbruster
Cao Jiaxi
Marc-André Lureau
Matt Hines
Michael Roth
Bishara AbuHattoum
Daniel Henrique Barboza
Paolo Bonzini
Peter Maydell
Li Qiang
Tomáš Golembiovský
Sameeh Jubran
Igor Mammedov
Chen Hanxiao
Jonathon Reinhart
Prasad J Pandit
Daniel P. Berrangé
Michael S. Tsirkin
Max Reitz
Thomas Huth
Julia Suvorova
Philippe Mathieu-Daudé
ZhiPeng Lu
Alistair Francis
Eric Blake
Peng Hao
Thomas Lamprecht
Daniel Rempel
Li Ping
Stefan Hajnoczi