Commit Graph

1115 Commits

Author SHA1 Message Date
Paolo Bonzini cbdd1999da build: compile translate.o with -fno-gcse option on GCC 4.6.x and 4.7.[012]
These versions of GCC require insane (>2GB) amounts of memory to compile
translate.o.  As a countermeasure, disable the culprit optimization pass.
This should fix the buildbot failure for default_x86_64_fedora16.  Anyway
this is a good thing to do because people will try to compile 1.3 with
less than 2GB of memory and complain.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-28 13:18:33 -06:00
Stefan Weil 1358681344 tci: Fix build breakage (unresolved symbol tcg_out_tb_finalize)
Commit 32761257c0 enabled
qemu_ld/st optimization unconditionally for some hosts.

The TCG interpreter still does not support this kind of
optimization. Therefore builds with TCI fail with an
unresolved symbol tcg_out_tb_finalize. This is fixed here.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-18 20:38:04 +00:00
Blue Swirl 2c5c4451e6 libseccomp: require version 1.0.0
Debian Wheezy has version 0.1.0 which is not compatible, avoid it.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17 16:38:31 +00:00
Gerd Hoffmann b776eca138 pixman: build internal version early
Signed-off-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-14 13:29:12 +01:00
Gerd Hoffmann 42da6041d5 pixman: set --host for cross builds
Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-14 12:59:04 +01:00
Gerd Hoffmann 5ca9388a4d pixman: add output dir to include path
Needed to make sure the (generated) pixman-version.h file is found.
Based on a patch from Blue Swirl.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-14 12:39:18 +01:00
malc ed224a56b3 tcg/ppc: ld/st optimization
Signed-off-by: malc <av1474@comtv.ru>
2012-11-03 20:17:54 +04:00
Yeongkyoon Lee 32761257c0 configure: Add CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization
Enable CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization only when
a host is i386 or x86_64.

Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03 09:44:18 +00:00
Anthony Liguori de0a36cd01 Merge remote-tracking branch 'kraxel/usb.69' into staging
* kraxel/usb.69: (31 commits)
  usb-redir: Allow redirecting super speed devices to high speed controllers
  usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
  usb-redir: Use reject rather the disconnect on bad ep info
  usb-redir: Add an usbredir_setup_usb_eps() helper function
  usb-redir: Add support for input pipelining
  usb-redir: Add support for 32 bits bulk packet length
  combined-packet: Add a workaround for Linux usbfs + live migration
  usb: Add packet combining functions
  uhci: Don't crash on device disconnect
  uhci: Add a uhci_handle_td_error() helper function
  usb/ehci-pci: add helper to create ich9 usb controllers
  usb/ehci-pci: add ich9 00:1a.* variant
  usb/ehci-pci: dynamic type generation
  uhci: add ich9 00:1a.* variants
  uhci: stick irq routing info into UHCIInfo too.
  uhci: dynamic type generation
  xilinx_zynq: add USB controllers
  usb/ehci: add sysbus variant
  usb/ehci: split into multiple source files
  usb/ehci: Guard definition of EHCI_DEBUG
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-01 14:34:13 -05:00
Hans de Goede c19a798133 usb-redir: Add support for 32 bits bulk packet length
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01 15:17:58 +01:00
Gerd Hoffmann e2134eb922 pixman: windup in configure & makefiles
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01 13:59:58 +01:00
Peter Maydell a1d29d6c1d configure: use -Wwombat to test whether gcc recognizes -Wno-wombat
gcc will silently accept unrecognized -Wno-wombat warning suppression
options (it only mentions them if it has to print a compiler warning
for some other reason). Since we already run a check for whether gcc
recognizes the warning options we use, we can easily make this use
the positive sense of the option when checking for support for the
suppression option. This doesn't have any effect except that it avoids
gcc emitting extra messages about unrecognized command line options
when it is printing other warning messages.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-30 18:52:57 +00:00
Richard Henderson 1e9737da4a qemu-timer: Check for usable fields for SIGEV_THREAD_ID
Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID.  We need configure to check for
both before using it.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-28 14:54:25 +01:00
Bruce Rogers 9bca81624e configure: avoid compiler warning in pipe2 detection
When building qemu-kvm for openSUSE:Factory, I am getting a
warning in the pipe2 detection performed by configure, which
prevents using --enable-werror.

Change detection code to use return value of pipe2.

Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-27 14:21:04 +00:00
Peter Maydell c1556a812a configure: Disable (clang) initializer-overrides warnings
Disable clang's initializer-overrides warnings, as QEMU makes significant
use of the pattern of initializing an array with a range-based default
entry like
    [0 ... 0x1ff] = { GPIO_NONE, 0 }
followed by specific entries which override that default, and clang
would otherwise warn "initializer overrides prior initialization of
this subobject" when it encountered the specific entry.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-27 14:20:06 +00:00
Michael Tokarev f354b1a1ee fix CONFIG_QEMU_HELPERDIR generation again
commit 38f419f352 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa18.  But while techinically
that fix has been correct, all other similar variables are handled
differently.  Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-10-22 00:33:56 +02:00
Jan Kiszka 38f419f352 configure: Fix CONFIG_QEMU_HELPERDIR generation
We need to evaluate $libexecdir in configure, otherwise we literally end
up with "${prefix}/libexec" instead of the absolute path as
CONFIG_QEMU_HELPERDIR.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19 20:35:33 +02:00
Aurelien Jarno 41a05a4576 Merge branch 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
  linux-user: register align p{read, write}64
  linux-user: ppc: mark as long long aligned
  tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
  configure: Remove unnecessary host_guest_base code
  linux-user: If loading fails, print error as string, not number
  linux-user: Fix siginfo handling
  alpha-linux-user: Fix sigaltstack structure definition
  linux-user: Implement gethostname
  linux-user: Perform more checks on iovec lists
  linux-user: fix multi-threaded /proc/self/maps
  linux-user: fix statfs
2012-10-19 20:28:22 +02:00
Stefan Weil abab1a0f32 configure: Remove unused parameters from main function
This modification is required if compiler option -Wunused-parameter is activated.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-19 10:38:53 +02:00
Anthony Liguori 5d9619aa1f Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
  vnc: fix "info vnc" with "-vnc ..., reverse=on"
  sheepdog: use bool for boolean variables
  configure: Tidy up remnants of non-64-bit physaddrs
2012-10-12 11:19:56 -05:00
Anthony Liguori 453162e132 Merge remote-tracking branch 'mdroth/qga-pull-10-9-12' into staging
* mdroth/qga-pull-10-9-12:
  qemu-ga: ga_open_pidfile(): add new line to pidfile
  qemu-ga: use state dir from CONFIG_QEMU_LOCALSTATEDIR
  configure: add --localstatedir
2012-10-12 09:14:23 -05:00
Peter Maydell 30163d8995 configure: Remove unnecessary host_guest_base code
All TCG hosts now support guest-base functionality, so we can
remove the setting of host_guest_base to 'yes' in every arm
of the case "$cpu" statement, and simply set guest_base to
default to 'yes'.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 14:26:29 +03:00
Peter Maydell 1e14afef00 configure: Tidy up remnants of non-64-bit physaddrs
Tidy up some remnants of code to support non-64-bit physaddrs
which were accidentally omitted from commit 4be403c8.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-12 10:47:35 +02:00
Luiz Capitulino 785c23ae5c configure: add --localstatedir
Next commit wants to use it.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2012-10-09 03:39:42 -05:00
Gerd Hoffmann 67be6726b6 spice: raise requirement to 0.12
With the next qemu version (1.3) we are going to bump the qxl device
revision to 4.  The new features available require a recent spice-server
version, so raise up the bar.  Otherwise we would end up with different
qxl revisions depending on the spice-server version installed, which
would be a major PITA when it comes to compat properties.

Clear out a big bunch of #ifdefs which are not needed any more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-08 12:15:17 +02:00
Aurelien Jarno 048d3612a5 Merge branch 'trivial-patches' of git://github.com/stefanha/qemu
* 'trivial-patches' of git://github.com/stefanha/qemu:
  versatilepb: Use symbolic indices for ARM PIC
  qdev: kill bogus comment
  qemu-barrier: Fix compiler version check for future gcc versions
  hw: Add missing 'static' attribute for QEMUMachine
  cleanup useless return sentence
  qemu-sockets: Fix compiler warning (regression for MinGW)
  vnc: Fix spelling (hellmen -> hellman) in comment
  slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
  tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
  cpu: Add missing 'static' attribute to qemu_global_mutex
  configure: Support empty target list (--target-list=)
  hw: Fix return value check for bdrv_read, bdrv_write
2012-10-06 18:54:14 +02:00
Stefan Weil c9159fe9aa Remove libhw
The entries for libhw* are no longer needed in .gitignore.

There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05 16:07:49 -05:00
Stefan Weil afb63ebd0a configure: Support empty target list (--target-list=)
Specifying an empty target list with --target-list= is shorter
than specifying --disable-user --disable-system.

Both variants should give the same result: no targets at all.

This modification implements that feature.

It uses a trick which works with POSIX compliant shells to test whether
target_list is undefined (=> default targets) or empty (=> no targets).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05 14:00:36 +02:00
Anthony Liguori 05d4f2f2ca Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (30 commits)
  qemu-iotests: add tests for streaming error handling
  qemu-iotests: map underscore to dash in QMP argument names
  blkdebug: process all set_state rules in the old state
  stream: add on-error argument
  block: introduce block job error
  iostatus: reorganize io error code
  iostatus: change is_read to a bool
  iostatus: move BlockdevOnError declaration to QAPI
  iostatus: rename BlockErrorAction, BlockQMPEventAction
  qemu-iotests: add test for pausing a streaming operation
  qmp: add block-job-pause and block-job-resume
  block: add support for job pause/resume
  qmp: add 'busy' member to BlockJobInfo
  block: add block_job_query
  block: move job APIs to separate files
  block: fix documentation of block_job_cancel_sync
  qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
  qemu-iotests: add initial tests for live block commit
  QAPI: add command for live block commit, 'block-commit'
  block: helper function, to find the base image of a chain
  ...
2012-10-04 19:53:50 -05:00
Anthony Liguori 938406dfb1 Merge remote-tracking branch 'kraxel/usb.66' into staging
* kraxel/usb.66:
  usb: Fix usb_packet_map() in the presence of IOMMUs
  usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
  ehci: Fix interrupt packet MULT handling
  xhci: create a memory region for each port
  xhci: route string & usb hub support
  xhci: tweak limits
  compat: turn off msi/msix on xhci for old machine types
  add pc-1.3 machine type

Conflicts:
	hw/pc_piix.c

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04 19:49:15 -05:00
Avi Kivity 4be403c815 Make target_phys_addr_t 64 bits unconditionally
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations.  Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04 19:46:18 -05:00
Bharata B Rao eb100396b9 configure: Add a config option for GlusterFS as block backend
GlusterFS support in QEMU depends on libgfapi, libgfrpc and
libgfxdr provided by GlusterFS.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 17:58:06 +02:00
Hans de Goede 8b626aa784 usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
The usbredir 0.5 release introduced the new API for 64 bit packet ids, but
it kept the libusbredirparser.pc name as is, meaning that older versions of
qemu will still have their pkg-config check for usbredirparser fulfilled,
and build with the usb-redir device. Due to the API change there will be
some compiler warnings, but the build will succeed, however the usb-redir
device will be broken on 32 bit machines.

To solve this a new usbredir-0.5.2 release is coming, which renames the
libusbredirparser.pc file to libusbredirparser-0.5.pc, so that it will no
longer fulfill the pkg-config check of the qemu-1.2 and older releases,
stopping the (silent) breakage. This patch adjusts qemu master's configure
to properly detect the new usbredir release.

Changes in v2:
-Not only use the new .pc name in the check but also when getting cflags
 and libs!

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-26 09:24:42 +02:00
Stefan Weil 8bdd3d499f configure: Allow builds without any system or user emulation
The old code aborted configure when no emulation target was selected.
Even after removing the 'exit 1', it tried to read from STDIN
when QEMU was configured with

    configure' '--disable-user' '--disable-system'

This is fixed here.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25 18:44:34 -05:00
Richard Henderson 4c3204cb12 tcg-sparc: Clean up cruft stemming from attempts to use global registers.
Don't use -ffixed-gN.  Don't link statically.  Don't save/restore
AREG0 around calls.  Don't allocate space on the stack for AREG0 save.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:19 +02:00
Richard Henderson c6f7e4fb9a tcg-sparc: Support GUEST_BASE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:18 +02:00
Richard Henderson 9b9c37c364 tcg-sparc: Assume v9 cpu always, i.e. force v8plus in 32-bit mode.
Current code doesn't actually work in 32-bit mode at all.  Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:16 +02:00
Aurelien Jarno cfb75cb980 Merge branch 'usb.65' of git://git.kraxel.org/qemu
* 'usb.65' of git://git.kraxel.org/qemu:
  uhci: Don't queue up packets after one with the SPD flag set
  usb-redir: Revert usb-redir part of commit 93bfef4c
  usb-redir: Add chardev open / close debug logging
  usb-redir: Add support for migration
  usb-redir: Store max_packet_size in endp_data
  usb-redir: Add an already_in_flight packet-id queue
  usb-redir: Change cancelled packet code into a generic packet-id queue
  ehci: Walk async schedule before and after migration
  ehci: Don't set seen to 0 when removing unseen queue-heads
  configure: usbredir fixes
  ehci: Don't process too much frames in 1 timer tick (v2)
  ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
  ehci: switch to new-style memory ops
  usb-host: allow emulated (non-async) control requests without USBPacket
2012-09-21 19:53:26 +02:00
Anthony Liguori 509e9c462d Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
  configure: fix seccomp check
  arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
  kvm: Fix warning from static code analysis
  qapi: Fix enumeration typo error
  console: Clean up bytes per pixel calculation
  Fix copy&paste typos in documentation comments
  linux-user: Remove #if 0'd cpu_get_real_ticks() definition
  ui: Fix spelling in comment (ressource -> resource)
  Spelling fixes in comments and macro names (ressource -> resource)
  Fix spelling (licenced -> licensed) in GPL
  Spelling fixes in comments and documentation
  srp: Don't use QEMU_PACKED for single elements of a structured type
2012-09-17 10:21:42 -05:00
Anthony Liguori cd6dcc7105 Merge remote-tracking branch 'spice/spice.v60' into staging
* spice/spice.v60:
  hw/qxl: support client monitor configuration via device
  qxl: add trace-event for QXL_IO_LOG
  hw/qxl: tracing fixes
  qxl: better cleanup for surface destroy
  qxl: Ignore set_client_capabilities pre/post migrate
  qxl: dont update invalid area
  spice: send updates only for changed screen content
  spice: add screen mirror
  spice: split qemu_spice_create_update
  spice: switch to queue for vga mode updates
2012-09-17 10:21:09 -05:00
Anthony Liguori 121afa9e0c Revert "Add ability to disable build of all targets"
This reverts commit 66d5499b37.

This commit broke --target-list="x86_64-softmmu" and the fix isn't immediatley
obvious.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-17 10:18:48 -05:00
Blue Swirl 89c33337fd Remove unused CONFIG_TCG_PASS_AREG0 and dead code
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.

Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.

Remove unused HELPER_CFLAGS.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-09-15 17:51:14 +00:00
Blue Swirl 895c2d0435 target-mips: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15 17:51:13 +00:00
Blue Swirl 485d003539 target-sh4: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-15 17:44:33 +00:00
Aurelien Jarno cf7e0c80aa target-cris: Switch to AREG0 free mode
Add an explicit CPUCRISState parameter instead of relying on AREG0, and
use cpu_ld* in translation and interrupt handling. Remove AREG0 swapping
in tlb_fill(). Switch to AREG0 free mode

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15 17:44:33 +00:00
Blue Swirl 64254eba53 target-microblaze: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-15 17:44:33 +00:00
Blue Swirl d31dd73e48 target-arm: final conversion to AREG0 free mode
Convert code load functions and switch to AREG0 free mode.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-15 17:44:32 +00:00
Blue Swirl 04a130eaa1 target-unicore32: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.

Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-15 17:44:32 +00:00
Blue Swirl 3187114152 target-m68k: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-15 17:44:32 +00:00
Blue Swirl 32ac0ca2ec target-lm32: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-15 17:44:32 +00:00