Using the 'multiple caching features' means explode the YAML array,
thus it eases the git workflow (it is easier to move patches around).
See https://docs.travis-ci.com/user/caching#enabling-multiple-caching-features
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170809202712.6951-4-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For whatever reason this doesn't trigger normally but because
compile_prog uses QEMU_CFLAGS we end up trying to build a -pie
--no-pie build which confuses compilers on some non-x86 hosts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently this stops the mega:
make docker-test-build
from working. Once the source is patched to deal with the case this
workaround can be removed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Debian QEMU packages require a bunch of cross compilers for
building firmware which aren't available on all host architectures.
Using --arch-only skips this particular requirement and allows us to
install just the dependencies we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it directly.
This fixes:
$ make docker-test-build@IMAGE DEBUG=1
[...]
+ echo ' ./test-build'
./test-build
+ echo '* Hit Ctrl-D to continue, or type '\''exit 1'\'' to abort'
* Hit Ctrl-D to continue, or type 'exit 1' to abort
+ echo
+ /bin/sh --noprofile --norc
/bin/sh: 0: Illegal option --
Fixes: 2b0c4fa13f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Another image that can't be used directly to build QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This should have been marked when the docker recipe was added to
prevent it being used for cross compiling QEMU. Sort the
DEBIAN_PARTIAL_IMAGE list while we are at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Jessie has entered LTS the powerpc architecture has been dropped
so we can no longer build the image from scratch. However we can use
the snapshot archive to build the last working version.
This now only lives on an example of setting up a user-cross image as
at least on x86-64 we can use the Buster packaged cross compiler for
building test images.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While we are not currently using it we might as well keep the image
for later usage. So:
- update to a more recent snapshot
- clean up verbiage in commentary
- remove duplicate shell from a merge failure
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We need to add additional packages to the base images to be able to
build QEMU so lets avoid building with it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
You can assume the failures most people are interested in are the
cross-compile failures that are specific to the cross compile target.
Set DEF_TARGET_LIST based on what we use for shippable, the user can
always override by calling with TARGET_LIST set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We might as well not repeat ourselves. At the same time allow it to be
overridden which we will use later from docker targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This hides the new build artefacts from the re-organised TCG tests when
you are doing an in-source build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.
Rename Makefile to Makefile.target, since it is not a toplevel
makefile.
Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include. Tests are now placed in
tests/tcg/$(TARGET).
Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64. Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For i386 specifically, this allows using the host GCC
to compile the i386 tests. But, it should really be
done for all targets, unless we want to pass $(EXTRA_CFLAGS)
directly as part of $(CC).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This was only added in Python 3.6 and not all the build hosts have
that recent a python3. However we still need to ensure everything is
returns as a unicode string so checks higher up the call chain don't
barf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
fixup! tests/docker: handle missing encoding keyword for subprocess.check_output
Podman requires a little bit of additional magic to the uid mapping
which was already done for the normal RunCommand. We simplify the
logic by pushing it directly into the Docker::run method to avoid
instantiating an extra Docker() object and ensure the CC command
always runs as the current user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The workaround that attempts to accomplish the same result as --userns=keep-id
does not appear to work well with UIDs much above 1000 (like mine, which is
above 20000.)
Since we have official support for this "trick" now, use the supported method.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190904232451.26466-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The introduction of podman support inadvertently broke configure's
detect of the container support as the configure probe didn't specify
an engine type. To fix this in docker.py:
- only (re)set USE_ENGINE if --engine is specified
- enhance the output so docker is no longer just yes
In the configure script we can at least start cleaning up the
detecting and naming of variables. To avoid too much churn the
conversion of the various make DOCKER_foo variables has been left for
future clean-ups.
Fixes: 9459f75413
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
Most of the code in hw/misc/ does not directly depend on CPU-specific
code. Mark it as "common" so that the code can be shared between e.g.
qemu-system-arm and qemu-system-aarch64, or between the various mips
flavours, instead of recompiling it for each and every target again
and again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190902162638.28142-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add a test of the NeXTcube framebuffer using the Tesseract OCR
engine on a screenshot of the framebuffer device.
The test is very quick:
$ avocado --show=app,console run tests/acceptance/machine_m68k_nextcube.py
JOB ID : 78844a92424cc495bd068c3874d542d1e20f24bc
JOB LOG : /home/phil/avocado/job-results/job-2019-08-13T13.16-78844a9/job.log
(1/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_size: PASS (2.16 s)
(2/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_ocr_with_tesseract_v3: -
ue r pun Honl'flx ; 5‘ 55‘
avg ncaaaaa 25 MHZ, memary jag m
Backplane slat «a
Ethernet address a a r a r3 2
Memgry sackets aea canflqured far 16MB Darlly page made stMs but have 16MB page made stMs )nstalled
Memgry sackets a and 1 canflqured far 16MB Darlly page made stMs but have 16MB page made stMs )nstalled
[...]
Yestlnq the rpu, 5::
system test raneg Errar egge 51
Egg: cammand
Default pggc devlce nut fauna
NEXY>I
PASS (2.64 s)
(3/3) tests/acceptance/machine_m68k_nextcube.py:NextCubeMachine.test_bootrom_framebuffer_ocr_with_tesseract_v4: SKIP: tesseract v4 OCR tool not available
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 1 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 5.35 s
Documentation on how to install tesseract:
https://github.com/tesseract-ocr/tesseract/wiki#installation
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190813134921.30602-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
I don't have much clue about the NeXT hardware, but at least I know now
the source files a little bit, so I volunteer to pick up patches and send
PULL requests for them until someone else with more knowledge steps up
to do this job instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-7-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXTcube uses a normal 8530 serial controller, so we can simply use
our normal "escc" device here.
While we're at it, also add a boot-serial-test for the next-cube machine,
now that the serial output works.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-6-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
On Sparc and PowerMac, the bit 0 of the address selects the register
type (control or data) and bit 1 selects the channel (B or A).
On m68k Macintosh and NeXTcube, the bit 0 selects the channel and
bit 1 the register type.
This patch introduces a new parameter (bit_swap) to the device interface
to indicate bits usage must be swapped between registers and channels.
For the moment all the machines use the bit 0, but this change will be
needed to emulate the Quadra 800 or NeXTcube machine.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
[thh: added NeXTcube to the patch description]
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-5-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
It is still quite incomplete (no SCSI, no floppy emulation, no network,
etc.), but the firmware already shows up the debug monitor prompt in the
framebuffer display, so at least the very basics are already working.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-cube.c
and altered quite a bit to fit the latest interface and coding conventions
of the current QEMU.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-4-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
It is likely still quite incomplete (e.g. mouse and interrupts are not
implemented yet), but it is good enough for keyboard input at the firmware
monitor.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-kbd.c
and altered to fit the latest interface of the current QEMU (e.g. to use
memory_region_init_io() instead of cpu_register_physical_memory()).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-3-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl1xeUEACgkQp6FrSiUn
Q2qCTQgAh0Q8HM6qDhDCTtNZ/HxxNTZ7n1O9ZB7bTQ+S6miFPh77+qsI/Gk81rJR
iwPKv1k8JZBnWtciwl2uynBCVlxHmBtxmVlzc66BVg3TMyOx3Eedsbel9Dl5QUgp
JREwPUN0uyly+zDL8X/7WB+Xmldz2u6cbnfl8JeszCscnhJ4cFNMzW5b4gaCpi73
OYt8AU2vg8c9yDK6lb/Xcc7dGSAba1vbcTSc6GPaGGlY5nPM/JKsWjlU8Abg2krM
m/mGpQzsb72xcL/9/vY17xarFi8uz4uU+U0Ohpe5XYl+IO/RiEgjokitlgrUtMWi
LNVKWj+5E0lIsNVSwhIWLEQxQACbjw==
=P3mc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-05-v2' into staging
nbd patches for 2019-09-05
- Advertise NBD_FLAG_CAN_MULTI_CONN on readonly images
- Tolerate larger set of server error responses during handshake
- More precision on handling fallocate() failures due to alignment
- Better documentation of NBD connection URIs
- Implement new extension NBD_CMD_FLAG_FAST_ZERO to benefit qemu-img convert
# gpg: Signature made Thu 05 Sep 2019 22:08:17 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-09-05-v2:
nbd: Implement server use of NBD FAST_ZERO
nbd: Implement client use of NBD FAST_ZERO
nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO
nbd: Improve per-export flag handling in server
docs: Update preferred NBD device syntax
block: workaround for unaligned byte range in fallocate()
nbd: Tolerate more errors to structured reply request
nbd: Use g_autofree in a few places
nbd: Advertise multi-conn for shared read-only connections
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The server side is fairly straightforward: we can always advertise
support for detection of fast zero, and implement it by mapping the
request to the block layer BDRV_REQ_NO_FALLBACK.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: update iotests 223, 233]
The client side is fairly straightforward: if the server advertised
fast zero support, then we can map that to BDRV_REQ_NO_FALLBACK
support. A server that advertises FAST_ZERO but not WRITE_ZEROES
is technically broken, but we can ignore that situation as it does
not change our behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD. The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.
The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request). However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information. We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
When creating a read-only image, we are still advertising support for
TRIM and WRITE_ZEROES to the client, even though the client should not
be issuing those commands. But seeing this requires looking across
multiple functions:
All callers to nbd_export_new() passed a single flag based solely on
whether the export allows writes. Later, we then pass a constant set
of flags to nbd_negotiate_options() (namely, the set of flags which we
always support, at least for writable images), which is then further
dynamically modified with NBD_FLAG_SEND_DF based on client requests
for structured options. Finally, when processing NBD_OPT_EXPORT_NAME
or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the
runtime set of flags we've built up over several functions.
Let's refactor things to instead compute a baseline of flags as soon
as possible which gets shared between multiple clients, in
nbd_export_new(), and changing the signature for the callers to pass
in a simpler bool rather than having to figure out flags. We can then
get rid of the 'myflags' parameter to various functions, and instead
refer to client for everything we need (we still have to perform a
bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and
NBD_OPT_EXPORT_GO, but it's easier to see what is being computed).
This lets us quit advertising senseless flags for read-only images, as
well as making the next patch for exposing FAST_ZERO support easier to
write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: improve commit message, update iotest 223]
Mention the preferred URI form, especially since NBD is trying to
standardize that form: https://lists.debian.org/nbd/2019/06/msg00012.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190903145634.20237-1-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Revert the commit 118f99442d 'block/io.c: fix for the allocation failure'
and use better error handling for file systems that do not support
fallocate() for an unaligned byte range. Allow falling back to pwrite
in case fallocate() returns EINVAL.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1566913973-15490-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
