Most Arm architectural debug exceptions (eg watchpoints) are ignored
if the configured "debug exception level" is below the current
exception level (so for example EL1 can't arrange to get debug exceptions
for EL2 execution). Exceptions generated by the BRK or BPKT instructions
are a special case -- they must always cause an exception, so if
we're executing above the debug exception level then we
must take them to the current exception level.
This fixes a bug where executing BRK at EL2 could result in an
exception being taken at EL1 (which is strictly forbidden by the
architecture).
Fixes: https://bugs.launchpad.net/qemu/+bug/1838277
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190730132522.27086-1-peter.maydell@linaro.org
In arm_cpu_realizefn() we make several assertions about the values of
guest ID registers:
* if the CPU provides AArch32 v7VE or better it must advertise the
ARM_DIV feature
* if the CPU provides AArch32 A-profile v6 or better it must
advertise the Jazelle feature
These are essentially consistency checks that our ID register
specifications in cpu.c didn't accidentally miss out a feature,
because increasingly the TCG emulation gates features on the values
in ID registers rather than using old-style checks of ARM_FEATURE_FOO
bits.
Unfortunately, these asserts can cause problems if we're running KVM,
because in that case we don't control the values of the ID registers
-- we read them from the host kernel. In particular, if the host
kernel is older than 4.15 then it doesn't expose the ID registers via
the KVM_GET_ONE_REG ioctl, and we set up dummy values for some
registers and leave the rest at zero. (See the comment in
target/arm/kvm64.c kvm_arm_get_host_cpu_features().) This set of
dummy values is not sufficient to pass our assertions, and so on
those kernels running an AArch32 guest on AArch64 will assert.
We could provide a more sophisticated set of dummy ID registers in
this case, but that still leaves the possibility of a host CPU which
reports bogus ID register values that would cause us to assert. It's
more robust to only do these ID register checks if we're using TCG,
as that is the only case where this is truly a QEMU code bug.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190718125928.20147-1-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1830864
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported by GCC9 when building with -Wimplicit-fallthrough=2:
target/arm/helper.c: In function ‘arm_cpu_do_interrupt_aarch32_hyp’:
target/arm/helper.c:7958:14: error: this statement may fall through [-Werror=implicit-fallthrough=]
7958 | addr = 0x14;
| ~~~~~^~~~~~
target/arm/helper.c:7959:5: note: here
7959 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Fixes: b9bc21ff9f
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190719111451.12406-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the M-profile architecture, when we do a vector table fetch and it
fails, we need to report a HardFault. Whether this is a Secure HF or
a NonSecure HF depends on several things. If AIRCR.BFHFNMINS is 0
then HF is always Secure, because there is no NonSecure HardFault.
Otherwise, the answer depends on whether the 'underlying exception'
(MemManage, BusFault, SecureFault) targets Secure or NonSecure. (In
the pseudocode, this is handled in the Vector() function: the final
exc.isSecure is calculated by looking at the exc.isSecure from the
exception returned from the memory access, not the isSecure input
argument.)
We weren't doing this correctly, because we were looking at
the target security domain of the exception we were trying to
load the vector table entry for. This produces errors of two kinds:
* a load from the NS vector table which hits the "NS access
to S memory" SecureFault should end up as a Secure HardFault,
but we were raising an NS HardFault
* a load from the S vector table which causes a BusFault
should raise an NS HardFault if BFHFNMINS == 1 (because
in that case all BusFaults are NonSecure), but we were raising
a Secure HardFault
Correct the logic.
We also fix a comment error where we claimed that we might
be escalating MemManage to HardFault, and forgot about SecureFault.
(Vector loads can never hit MPU access faults, because they're
always aligned and always use the default address map.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190705094823.28905-1-peter.maydell@linaro.org
The ARMv5 architecture didn't specify detailed per-feature ID
registers. Now that we're using the MVFR0 register fields to
gate the existence of VFP instructions, we need to set up
the correct values in the cpu->isar structure so that we still
provide an FPU to the guest.
This fixes a regression in the arm926 and arm1026 CPUs, which
are the only ones that both have VFP and are ARMv5 or earlier.
This regression was introduced by the VFP refactoring, and more
specifically by commits 1120827fa1 and 266bd25c48,
which accidentally disabled VFP short-vector support and
double-precision support on these CPUs.
Fixes: 1120827fa1
Fixes: 266bd25c48
Fixes: https://bugs.launchpad.net/qemu/+bug/1836192
Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Message-id: 20190711131241.22231-1-peter.maydell@linaro.org
When we converted to using feature bits in 602f6e42cf we missed out
the fact (dp && arm_dc_feature(s, ARM_FEATURE_V8)) was supported for
-cpu max configurations. This caused a regression in the GCC test
suite. Fix this by setting the appropriate bits in mvfr1.FPHP to
report ARMv8-A with FP support (but not ARMv8.2-FP16).
Fixes: https://bugs.launchpad.net/qemu/+bug/1836078
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190711103737.10017-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present we have a potential error in that helper_retaddr contains
data for handle_cpu_signal, but we have not ensured that those stores
will be scheduled properly before the operation that may fault.
It might be that these races are not in practice observable, due to
our use of -fno-strict-aliasing, but better safe than sorry.
Adjust all of the setters of helper_retaddr.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit e9d652824b we extracted the vfp_set_fpscr_to_host()
function but failed at calling it in the correct place, we call
it after xregs[ARM_VFP_FPSCR] is modified.
Fix by calling this function before we update FPSCR.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190705124318.1075-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Off by one error in the EL2 and EL3 tests. Remove the test
against EL3 entirely, since it must always be true.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190702104732.31154-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The global smp variables in arm are replaced with smp machine properties.
The init_cpus() and *_create_rpu() are refactored to pass MachineState.
A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-9-like.xu@linux.intel.com>
[ehabkost: Fix hw/arm/sbsa-ref.c and hw/arm/aspeed.c]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Coverity points out (CID 1402195) that the loop in trans_VMOV_imm_dp()
that iterates over the destination registers in a short-vector VMOV
accidentally throws away the returned updated register number
from vfp_advance_dreg(). Add the missing assignment. (We got this
correct in trans_VMOV_imm_sp().)
Fixes: 18cf951af9
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190702105115.9465-1-peter.maydell@linaro.org
Thumb instructions in an IT block are set up to be conditionally
executed depending on a set of condition bits encoded into the IT
bits of the CPSR/XPSR. The architecture specifies that if the
condition bits are 0b1111 this means "always execute" (like 0b1110),
not "never execute"; we were treating it as "never execute". (See
the ConditionHolds() pseudocode in both the A-profile and M-profile
Arm ARM.)
This is a bit of an obscure corner case, because the only legal
way to get to an 0b1111 set of condbits is to do an exception
return which sets the XPSR/CPSR up that way. An IT instruction
which encodes a condition sequence that would include an 0b1111 is
UNPREDICTABLE, and for v8A the CONSTRAINED UNPREDICTABLE choices
for such an IT insn are to NOP, UNDEF, or treat 0b1111 like 0b1110.
Add a comment noting that we take the latter option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617175317.27557-7-peter.maydell@linaro.org
In the various helper functions for v7M/v8M instructions, use
the _ra versions of cpu_stl_data() and friends. Otherwise we
may get wrong behaviour or an assert() due to not being able
to locate the TB if there is an exception on the memory access
or if it performs an IO operation when in icount mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617175317.27557-5-peter.maydell@linaro.org
In preparation for supporting TCG disablement on ARM, we move most
of TCG related v7m/v8m helpers and APIs into their own file.
Note: It is easier to review this commit using the 'histogram'
diff algorithm:
$ git diff --diff-algorithm=histogram ...
or
$ git diff --histogram ...
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702144335.10717-2-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: updated qapi #include to match recent changes there]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per Peter Maydell:
Semihosting hooks either SVC or HLT instructions, and inside KVM
both of those go to EL1, ie to the guest, and can't be trapped to
KVM.
Let check_for_semihosting() return False when not running on TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701194942.10092-3-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These routines are TCG specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701194942.10092-2-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json. Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there. Add machine-target.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
In the next commit we will split the M-profile functions from this
file. Some function will be called out of helper.c. Declare them in
the "internals.h" header.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-22-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In few commits we will split the M-profile functions from this
file, and this function will also be called in the new file.
Declare it in the "internals.h" header.
Since it is in the middle of a block of M profile functions,
move it previous to this block to ease the later refactor.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-21-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Under KVM, the kernel gets the HVC call and handle the PSCI requests.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-20-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This code is specific to the SoftFloat floating-point
implementation, which is only used by TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-18-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_from_host().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-17-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_to_host().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-16-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To ease the review of the next commit,
move the vfp_exceptbits_to_host() function directly after
vfp_exceptbits_from_host(). Amusingly the diff shows we
are moving vfp_get_fpscr().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-15-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These routines are TCG specific.
The arm_deliver_fault() function is only used within the new
helper. Make it static.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-13-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next commit we will split the TLB related routines of
this file, and this function will also be called in the new
file. Declare it in the "internals.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-12-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-11-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Those helpers are a software implementation of the ARM v8 memory zeroing
op code. They should be moved to the op helper file, which is going to
eventually be built only when TCG is enabled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Robert Bradford <robert.bradford@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-10-philmd@redhat.com
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we'll move this code around, fix its style first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-9-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 8c06fbdf36 checkpatch.pl enforce a new multiline
comment syntax. Since we'll move this code around, fix its style
first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-8-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-7-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Robert Bradford <robert.bradford@intel.com>
Reviewed-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Group SOFTMMU objects together.
Since PSCI is TCG specific, keep it separate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Group KVM rules together.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Group ARM objects together, TCG related ones at the bottom.
This will help when restricting TCG-only objects.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Group Aarch64 rules together, TCG related ones at the bottom.
This will help when restricting TCG-only objects.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 1120827fa1 we accidentally put the
"UNDEF unless FPU has double-precision support" check in
the single-precision VFM function. Put it in the dp
function where it belongs.
Fixes: 1120827fa1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617160130.3207-1-peter.maydell@linaro.org
The architecture permits FPUs which have only single-precision
support, not double-precision; Cortex-M4 and Cortex-M33 are
both like that. Add the necessary checks on the MVFR0 FPDP
field so that we UNDEF any double-precision instructions on
CPUs like this.
Note that even if FPDP==0 the insns like VMOV-to/from-gpreg,
VLDM/VSTM, VLDR/VSTR which take double precision registers
still exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190614104457.24703-3-peter.maydell@linaro.org
In several places cut and paste errors meant we were using the wrong
type for the 'arg' struct in trans_ functions called by the
decodetree decoder, because we were using the _sp version of the
struct in the _dp function. These were harmless, because the two
structs were identical and so decodetree made them typedefs of the
same underlying structure (and we'd have had a compile error if they
were not harmless), but we should clean them up anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190614104457.24703-2-peter.maydell@linaro.org
Remove the now unused TCG globals cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d.
cpu_M0 is still used by the iwmmxt code, and cpu_V0 and
cpu_V1 are used by both iwmmxt and Neon.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-13-peter.maydell@linaro.org
Remove some old constructns from NEON_2RM_VCVT_F16_F32 code:
* don't use CPU_F0s
* don't use tcg_gen_st_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-12-peter.maydell@linaro.org
Remove some old constructs from NEON_2RM_VCVT_F16_F32 code:
* don't use cpu_F0s
* don't use tcg_gen_ld_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-11-peter.maydell@linaro.org
Stop using cpu_F0s in the Neon VCVT fixed-point operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-10-peter.maydell@linaro.org
Stop using cpu_F0s for the Neon f32/s32 VCVT operations.
Since this is the last user of cpu_F0s in the Neon 2rm-op
loop, we can remove the handling code for it too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-9-peter.maydell@linaro.org
Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-8-peter.maydell@linaro.org
Stop using cpu_F0s for the NEON_2RM_VCVT[ANPM][US] ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-7-peter.maydell@linaro.org
Switch NEON_2RM_VRINT* away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-6-peter.maydell@linaro.org
Switch NEON_2RM_VABS_F away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-5-peter.maydell@linaro.org
Where Neon instructions are floating point operations, we
mostly use the old VFP utility functions like gen_vfp_abs()
which work on the TCG globals cpu_F0s and cpu_F1s. The
Neon for-each-element loop conditionally loads the inputs
into either a plain old TCG temporary for most operations
or into cpu_F0s for float operations, and similarly stores
back either cpu_F0s or the temporary.
Switch NEON_2RM_VABS_F away from using cpu_F0s, and
update neon_2rm_is_float_op() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-4-peter.maydell@linaro.org
The AArch32 VMOV (immediate) instruction uses the same VFP encoded
immediate format we already handle in vfp_expand_imm(). Use that
function rather than hand-decoding it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-3-peter.maydell@linaro.org
We want to use vfp_expand_imm() in the AArch32 VFP decode;
move it from the a64-only header/source file to the
AArch32 one (which is always compiled even for AArch64).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-2-peter.maydell@linaro.org
Allow the DSP extension to be disabled via a CPU property for
M-profile CPUs. (A and R-profile CPUs don't have this extension
as a defined separate optional architecture extension, so
they don't need the property.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-3-peter.maydell@linaro.org
Allow VFP and neon to be disabled via a CPU property. As with
the "pmu" property, we only allow these features to be removed
from CPUs which have it by default, not added to CPUs which
don't have it.
The primary motivation here is to be able to optionally
create Cortex-M33 CPUs with no FPU, but we provide switches
for both VFP and Neon because the two interact:
* AArch64 can't have one without the other
* Some ID register fields only change if both are disabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-2-peter.maydell@linaro.org
For VFP short vectors, the VFP registers are divided into a
series of banks: for single-precision these are s0-s7, s8-s15,
s16-s23 and s24-s31; for double-precision they are d0-d3,
d4-d7, ... d28-d31. Some banks are "scalar" meaning that
use of a register within them triggers a pure-scalar or
mixed vector-scalar operation rather than a full vector
operation. The scalar banks are s0-s7, d0-d3 and d16-d19.
When using a bank as part of a vector operation, we
iterate through it, increasing the register number by
the specified stride each time, and wrapping around to
the beginning of the bank.
Unfortunately our calculation of the "increment" part of this
was incorrect:
vd = ((vd + delta_d) & (bank_mask - 1)) | (vd & bank_mask)
will only do the intended thing if bank_mask has exactly
one set high bit. For instance for doubles (bank_mask = 0xc),
if we start with vd = 6 and delta_d = 2 then vd is updated
to 12 rather than the intended 4.
This only causes problems in the unlikely case that the
starting register is not the first in its bank: if the
register number doesn't have to wrap around then the
expression happens to give the right answer.
Fix this bug by abstracting out the "check whether register
is in a scalar bank" and "advance register within bank"
operations to utility functions which use the right
bit masking operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the float-to-integer VCVT instructions to decodetree.
Since these are the last unconverted instructions, we can
delete the old decoder structure entirely now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT (between floating-point and fixed-point) instructions
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VJCVT instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT integer-to-float instructions to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT double/single precision conversion insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP round-to-integer instructions VRINTR, VRINTZ and
VRINTX to decodetree.
These instructions were only introduced as part of the "VFP misc"
additions in v8A, so we check this. The old decoder's implementation
was incorrectly providing them even for v7A CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTT and VCVTB instructions which convert from
f32 and f64 to f16 to decodetree.
Since we're no longer constrained to the old decoder's style
using cpu_F0s and cpu_F0d we can perform a direct 16 bit
store of the right half of the input single-precision register
rather than doing a load/modify/store sequence on the full
32 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTT, VCVTB instructions that deal with conversion
from half-precision floats to f32 or 64 to decodetree.
Since we're no longer constrained to the old decoder's style
using cpu_F0s and cpu_F0d we can perform a direct 16 bit
load of the right half of the input single-precision register
rather than loading the full 32 bits and then doing a
separate shift or sign-extension.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP comparison instructions to decodetree.
Note that comparison instructions should not honour the VFP
short-vector length and stride information: they are scalar-only
operations. This applies to all the 2-operand instructions except
for VMOV, VABS, VNEG and VSQRT. (In the old decoder this is
implemented via the "if (op == 15 && rn > 3) { veclen = 0; }" check.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSQRT instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNEG instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VABS instruction to decodetree.
Unlike the 3-op versions, we don't pass fpst to the VFPGen2OpSPFn or
VFPGen2OpDPFn because none of the operations which use this format
and support short vectors will need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMOV (immediate) instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP fused multiply-add instructions (VFNMA, VFNMS,
VFMA, VFMS) to decodetree.
Note that in the old decode structure we were implementing
these to honour the VFP vector stride/length. These instructions
were introduced in VFPv4, and in the v7A architecture they
are UNPREDICTABLE if the vector stride or length are non-zero.
In v8A they must UNDEF if stride or length are non-zero, like
all VFP instructions; we choose to UNDEF always.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VDIV instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSUB instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VADD instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLA instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLA instruction to decodetree.
This is the first of the VFP 3-operand data processing instructions,
so we include in this patch the code which loops over the elements
for an old-style VFP vector operation. The existing code to do this
looping uses the deprecated cpu_F0s/F0d/F1s/F1d TCG globals; since
we are going to be converting instructions one at a time anyway
we can take the opportunity to make the new loop use TCG temporaries,
which means we can do that conversion one operation at a time
rather than needing to do it all in one go.
We include an UNDEF check which was missing in the old code:
short-vector operations (with stride or length non-zero) were
deprecated in v7A and must UNDEF in v8A, so if the MVFR0 FPShVec
field does not indicate that support for short vectors is present
we UNDEF the operations that would use them. (This is a change
of behaviour for Cortex-A7, Cortex-A15 and the v8 CPUs, which
previously were all incorrectly allowing short-vector operations.)
Note that the conversion fixes a bug in the old code for the
case of VFP short-vector "mixed scalar/vector operations". These
happen where the destination register is in a vector bank but
but the second operand is in a scalar bank. For example
vmla.f64 d10, d1, d16 with length 2 stride 2
is equivalent to the pair of scalar operations
vmla.f64 d10, d1, d16
vmla.f64 d8, d3, d16
where the destination and first input register cycle through
their vector but the second input is scalar (d16). In the
old decoder the gen_vfp_F1_mul() operation uses cpu_F1{s,d}
as a temporary output for the multiply, which trashes the
second input operand. For the fully-scalar case (where we
never do a second iteration) and the fully-vector case
(where the loop loads the new second input operand) this
doesn't matter, but for the mixed scalar/vector case we
will end up using the wrong value for later loop iterations.
In the new code we use TCG temporaries and so avoid the bug.
This bug is present for all the multiply-accumulate insns
that operate on short vectors: VMLA, VMLS, VNMLA, VNMLS.
Note 2: the expression used to calculate the next register
number in the vector bank is not in fact correct; we leave
this behaviour unchanged from the old decoder and will
fix this bug later in the series.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Expand out the sequences in the new decoder VLDR/VSTR/VLDM/VSTM trans
functions which perform the memory accesses by going via the TCG
globals cpu_F0s and cpu_F0d, to use local TCG temps instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP load/store multiple insns to decodetree.
This includes tightening up the UNDEF checking for pre-VFPv3
CPUs which only have D0-D15 : they now UNDEF for any access
to D16-D31, not merely when the smallest register in the
transfer list is in D16-D31.
This conversion does not try to share code between the single
precision and the double precision versions; this looks a bit
duplicative of code, but it leaves the door open for a future
refactoring which gets rid of the use of the "F0" registers
by inlining the various functions like gen_vfp_ld() and
gen_mov_F0_reg() which are hiding "if (dp) { ... } else { ... }"
conditionalisation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP single load/store insns VLDR and VSTR to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP two-register transfer instructions to decodetree
(in the v8 Arm ARM these are the "Advanced SIMD and floating-point
64-bit move" encoding group).
Again, we expand out the sequences involving gen_vfp_msr() and
gen_msr_vfp().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "single-precision" register moves to decodetree:
* VMSR
* VMRS
* VMOV between general purpose register and single precision
Note that the VMSR/VMRS conversions make our handling of
the "should this UNDEF?" checks consistent between the two
instructions:
* VMSR to MVFR0, MVFR1, MVFR2 now UNDEF from EL0
(previously was a nop)
* VMSR to FPSID now UNDEFs from EL0 or if VFPv3 or better
(previously was a nop)
* VMSR to FPINST and FPINST2 now UNDEF if VFPv3 or better
(previously would write to the register, which had no
guest-visible effect because we always UNDEF reads)
We also tighten up the decode: we were previously underdecoding
some SBZ or SBO bits.
The conversion of VMOV_single includes the expansion out of the
gen_mov_F0_vreg()/gen_vfp_mrs() and gen_mov_vreg_F0()/gen_vfp_msr()
sequences into the simpler direct load/store of the TCG temp via
neon_{load,store}_reg32(): we know in the new function that we're
always single-precision, we don't need to use the old-and-deprecated
cpu_F0* TCG globals, and we don't happen to have the declaration of
gen_vfp_msr() and gen_vfp_mrs() at the point in the file where the
new function is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "double-precision" register moves to decodetree:
this covers VMOV scalar-to-gpreg, VMOV gpreg-to-scalar and VDUP.
Note that the conversion process has tightened up a few of the
UNDEF encoding checks: we now correctly forbid:
* VMOV-to-gpr with U:opc1:opc2 == 10x00 or x0x10
* VMOV-from-gpr with opc1:opc2 == 0x10
* VDUP with B:E == 11
* VDUP with Q == 1 and Vn<0> == 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
The accesses of elements < 32 bits could be improved by doing
direct ld/st of the right size rather than 32-bit read-and-shift
or read-modify-write, but we leave this for later cleanup,
since this series is generally trying to stick to fixing
the decode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The current VFP code has two different idioms for
loading and storing from the VFP register file:
1 using the gen_mov_F0_vreg() and similar functions,
which load and store to a fixed set of TCG globals
cpu_F0s, CPU_F0d, etc
2 by direct calls to tcg_gen_ld_f64() and friends
We want to phase out idiom 1 (because the use of the
fixed globals is a relic of a much older version of TCG),
but idiom 2 is quite longwinded:
tcg_gen_ld_f64(tmp, cpu_env, vfp_reg_offset(true, reg))
requires us to specify the 64-bitness twice, once in
the function name and once by passing 'true' to
vfp_reg_offset(). There's no guard against accidentally
passing the wrong flag.
Instead, let's move to a convention of accessing 64-bit
registers via the existing neon_load_reg64() and
neon_store_reg64(), and provide new neon_load_reg32()
and neon_store_reg32() for the 32-bit equivalents.
Implement the new functions and use them in the code in
translate-vfp.inc.c. We will convert the rest of the VFP
code as we do the decodetree conversion in subsequent
commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the trans_*() functions we've just created from translate.c
to translate-vfp.inc.c. This is pure code motion with no textual
changes (this can be checked with 'git show --color-moved').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTA/VCVTN/VCVTP/VCVTM instructions to decodetree.
trans_VCVT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VRINTA/VRINTN/VRINTP/VRINTM instructions to decodetree.
Again, trans_VRINT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMINNM and VMAXNM instructions to decodetree.
As with VSEL, we leave the trans_VMINMAXNM() function
in translate.c for the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSEL instructions to decodetree.
We leave trans_VSEL() in translate.c for now as this allows
the patch to show just the changes from the old handle_vsel().
In the old code the check for "do D16-D31 exist" was hidden in
the VFP_DREG macro, and assumed that VFPv3 always implied that
D16-D31 exist. In the new code we do the correct ID register test.
This gives identical behaviour for most of our CPUs, and fixes
previously incorrect handling for Cortex-R5F, Cortex-M4 and
Cortex-M33, which all implement VFPv3 or better with only 16
double-precision registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
At the moment our -cpu max for AArch32 supports VFP short-vectors
because we always implement them, even for CPUs which should
not have them. The following commits are going to switch to
using the correct ID-register-check to enable or disable short
vector support, so we need to turn it on explicitly for -cpu max,
because Cortex-A15 doesn't implement it.
We don't enable this for the AArch64 -cpu max, because the v8A
architecture never supports short-vectors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-R5F initfn was not correctly setting up the MVFR
ID register values. Fill these in, since some subsequent patches
will use ID register checks rather than CPU feature bit checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the VFP access checking code so that we can use it in the
leaf functions of the decodetree decoder.
We call the function full_vfp_access_check() so we can keep
the more natural vfp_access_check() for a version which doesn't
have the 'ignore_vfp_enabled' flag -- that way almost all VFP
insns will be able to use vfp_access_check(s) and only the
special-register access function will have to use
full_vfp_access_check(s, ignore_vfp_enabled).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the infrastructure for building and invoking a decodetree decoder
for the AArch32 VFP encodings. At the moment the new decoder covers
nothing, so we always fall back to the existing hand-written decode.
We need to have one decoder for the unconditional insns and one for
the conditional insns, as otherwise the patterns for conditional
insns would incorrectly match against the unconditional ones too.
Since translate.c is over 14,000 lines long and we're going to be
touching pretty much every line of the VFP code as part of the
decodetree conversion, we create a new translate-vfp.inc.c to hold
the code which deals with VFP in the new scheme. It should be
possible to convert this into a standalone translation unit
eventually, but the conversion process will be much simpler if we
simply #include it midway through translate.c to start with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer. The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.
Add a testcase to that effect.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NSACR register allows secure code to configure the FPU
to be inaccessible to non-secure code. If the NSACR.CP10
bit is set then:
* NS accesses to the FPU trap as UNDEF (ie to NS EL1 or EL2)
* CPACR.{CP10,CP11} behave as if RAZ/WI
* HCPTR.{TCP11,TCP10} behave as if RAO/WI
Note that we do not implement the NSACR.NSASEDIS bit which
gates only access to Advanced SIMD, in the same way that
we don't implement the equivalent CPACR.ASEDIS and HCPTR.TASE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190510110357.18825-1-peter.maydell@linaro.org
This replaces 3 target-specific implementations for BIT, BIF, and BSL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190518191934.21887-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell
Philippe Mathieu-Daudé
Alex Bennée
Richard Henderson
Like Xu
Markus Armbruster
Samuel Ortiz
Liran Alon