Commit Graph

96 Commits

Author SHA1 Message Date
Maxim Uvarov c97377652d hw: gpio: implement gpio-pwr driver for qemu reset/poweroff
Implement gpio-pwr driver to allow reboot and poweroff machine.
This is simple driver with just 2 gpios lines. Current use case
is to reboot and poweroff virt machine in secure mode. Secure
pl066 gpio chip is needed for that.

Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-29 10:47:28 +00:00
Chetan Pant 61f3c91a67 nomaintainer: Fix Lesser GPL version number
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15 17:04:40 +01:00
Havard Skinnemoen 526dbbe087 hw/gpio: Add GPIO model for Nuvoton NPCM7xx
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.

Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:32 +00:00
Peter Maydell 834b9273d5 Pull request trivial patches 20200919
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9mUVcSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748c5IP/2Jh7HuM5LpGuhca81zCnUxIHnnfXLpR
 YXbRsD/q4VrCe9WxFZeyul1zcCpV4BnLNqsWA2PH44at+vcvCuXLU9vVzar1SMTh
 pAwuXc4qGkV4zttLzzYwkimQLxHl1Cy7RtoLJB7GjLj0A/VBvD7Z2cO2KSF4EOzU
 KQAHcIm8WYWjZy8lx5ZrCvq5KkPHMK+XvVxD+v/gXVWzU23wFMVJwhzi2PXqetRe
 RnAFA8tF3xlvXTJmeqqN277Otv6WLnANe1rjr/w4j5tUINaaiAX/gWkrwcFZprjo
 1p0E3o8ztrtql7B8DWH+xWLeFUpq3Qd9Ztp4ujFmpWQysbCZ6BWFocAz+v4Dd0F3
 luJP0e8X5hQAzJiu9aucOKpnUHaieWamo5J+5pWezTGB0wNYgnhRDp2LAefadV+I
 WmDjIWtZZ3Je48qT0bGzh+p8ZSqGQx/a5xx6eXr7MdlNhiWIV/evqotU2MoLnO7d
 QhQevHlk7nxayk3laVA4nTwJRdtEN8zfbuAB+gMZZvR11yBNrBm6q7oMNhkuP0QV
 glcta70RE7Nfa4TZaFzEzrjiF6V0k0+TtGY0VPB/0xjtCepiwOuoVbEjSe4arJ7Z
 1LkGY45Rdaas8yqWwZGAjbFWTkke85v+S8g2lCj/HihgfPf585uRZVPhJ9sIGc9w
 JcWyaIFsgHh8
 =MxMx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial patches 20200919

# gpg: Signature made Sat 19 Sep 2020 19:43:35 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  contrib/: fix some comment spelling errors
  qapi/: fix some comment spelling errors
  disas/: fix some comment spelling errors
  linux-user/: fix some comment spelling errors
  util/: fix some comment spelling errors
  scripts/: fix some comment spelling errors
  docs/: fix some comment spelling errors
  migration/: fix some comment spelling errors
  qemu/: fix some comment spelling errors
  scripts/git.orderfile: Display meson files along with buildsys ones
  hw/timer/hpet: Fix debug format strings
  hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw
  meson: remove empty else and duplicated gio deps
  manual: escape backslashes in "parsed-literal" blocks
  ui/spice-input: Remove superfluous forward declaration
  hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition
  hw/gpio/max7310: Remove impossible check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-22 15:42:23 +01:00
Eduardo Habkost 8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Philippe Mathieu-Daudé 03a3c6f16f hw/gpio/max7310: Remove impossible check
The max7310_gpio_set() handler is static and only used by
qdev_init_gpio_in, initialized with 8 IRQs. The 'line'
argument can not be out of the [0-8[ range.
Replace the dead code by an assertion.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200910072325.439344-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-16 10:43:48 +02:00
Peter Maydell f00f57f344 This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
  - Allows 16-bit writes to the SiFive test device. This fixes the
    failure to reboot the RISC-V virt machine
  - Support for the Microchip PolarFire SoC and Icicle Kit
  - A reafactor of RISC-V code out of hw/riscv
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
 cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
 Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
 sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
 lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
 IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
 t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
 =07oA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
 - Fixes a bug in printing trap causes
 - Allows 16-bit writes to the SiFive test device. This fixes the
   failure to reboot the RISC-V virt machine
 - Support for the Microchip PolarFire SoC and Icicle Kit
 - A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
  hw/riscv: Sort the Kconfig options in alphabetical order
  hw/riscv: Drop CONFIG_SIFIVE
  hw/riscv: Always build riscv_hart.c
  hw/riscv: Move sifive_test model to hw/misc
  hw/riscv: Move sifive_uart model to hw/char
  hw/riscv: Move riscv_htif model to hw/char
  hw/riscv: Move sifive_plic model to hw/intc
  hw/riscv: Move sifive_clint model to hw/intc
  hw/riscv: Move sifive_gpio model to hw/gpio
  hw/riscv: Move sifive_u_otp model to hw/misc
  hw/riscv: Move sifive_u_prci model to hw/misc
  hw/riscv: Move sifive_e_prci model to hw/misc
  hw/riscv: sifive_u: Connect a DMA controller
  hw/riscv: clint: Avoid using hard-coded timebase frequency
  hw/riscv: microchip_pfsoc: Hook GPIO controllers
  hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
  hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
  hw/net: cadence_gem: Add a new 'phy-addr' property
  hw/riscv: microchip_pfsoc: Connect a DMA controller
  hw/dma: Add SiFive platform DMA controller emulation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/riscv/trace-events
2020-09-13 20:29:35 +01:00
Peter Maydell 842038f55c trivial patches pull request 20200911
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9b0MsSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748UH0QAIQYMn0U5eMWREg+DOEEj2n/6h04lTeE
 K93RsaQ9OsB0cZvwZ08sGoHI6FyfPR8S5yFe5as1ykGcGyO4vNwqxxPeRvqSfgwX
 2nkldYwgkOLYsjOD+1G16f/TGJ3MWbUxyn6ta/cSVg+BhbSvMHT3SXTLQ3PB7Lvf
 1j3Y3B0BUBAjPh1sNIvBkEV1ZGlV9tqu+XviUf4hfqZOVSTsSb7prtuGVYz9GsH2
 RxEcPXQKNWei2eQET4l8otcBpV3dz0D/6sap8nAP8pz0VARn7hJXIn5f8USFHHfg
 LMWbXrB9I2bjqSmRqhGofxhGMaH2uKQvpv46MyCDel7eMENNj6F+ER2a+7J8Apy8
 vVWYg8qVA85rfxQcb7nHuDrLQiD/C1o1uZcV1O/Mwkm7typUcpPn00pQLxhEDf9O
 xta1/EU8X+7kgTIKWMwpC0HwponOfHiG1TCyzbQ91FiTb/peeOzejTQi88YRNZFV
 NEg1XIo79Q/no05F/j3nrju2ESzBQTA1F+Jms8aI6Q40nXPaXEjg7IA510os7Py7
 uCEtoQ7qEM4lHfuSl67AR2J/NVWlWbZDsjqhxiMsYLR85rkARIf/7fsVIi9ELKOQ
 AYZdfA/LebovUcp9kDfYHPvDzifGMmv2ppD3mcZWhGuuQTJ06sRMPxQbUF6LBVMc
 64FEl8o3wFgv
 =/CqY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:32:27 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  target/i386/kvm: Add missing fallthrough comment
  util/hexdump: Reorder qemu_hexdump() arguments
  util/hexdump: Convert to take a void pointer argument
  hw/arm/pxa2xx: Add missing fallthrough comment
  target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken()
  test-vmstate: remove unnecessary code in match_interval_mapping_node
  hw: hyperv: vmbus: Fix 32bit compilation
  kconfig: fix comment referring to old Makefiles
  meson.build: tweak sdl-image error message
  hw/net/e1000e: Remove duplicated write handler for FLSWDATA register
  hw/net/e1000e: Remove overwritten read handler for STATUS register
  Makefile: Skip the meson subdir in cscope/TAGS/ctags
  Makefile: Drop extra phony cscope
  hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)
  hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
  hw/acpi/tco: Remove unused definitions
  hw/isa/isa-bus: Replace hw_error() by assert()
  hw/mips/fuloong2e: Convert pointless error message to an assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	net/colo-compare.c
2020-09-12 14:23:15 +01:00
Bin Meng 4921a0ce86 hw/riscv: Move sifive_gpio model to hw/gpio
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_gpio model to hw/gpio directory.

Note this also removes the trace-events in the hw/riscv directory,
since gpio is the only supported trace target in that directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:19 -07:00
Philippe Mathieu-Daudé 1c3bd33a5e hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)
Replace disabled printf() by qemu_log_mask(UNIMP).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200901104234.92159-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09 15:28:59 +02:00
Philippe Mathieu-Daudé dfd4981a68 hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
Replace fprintf() by qemu_log_mask(LOG_GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200901104234.92159-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09 15:27:48 +02:00
Eduardo Habkost 8110fa1d94 Use DECLARE_*CHECKER* macros
Generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:27:09 -04:00
Eduardo Habkost db1015e92e Move QOM typedefs and add missing includes
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:26:43 -04:00
Liao Pingfang 830b925094 hw: Remove superfluous breaks
Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01 08:38:00 +02:00
Marc-André Lureau a7b057d1d0 meson: convert hw/gpio
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:31 -04:00
Paolo Bonzini 243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Markus Armbruster 668f62ec62 error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 4d21fcd524 qom: Don't handle impossible object_property_get_link() failure
Don't handle object_property_get_link() failure that can't happen
unless the programmer screwed up, pass &error_abort.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 62a35aaa31 qapi: Use returned bool to check for failure, Coccinelle part
The previous commit enables conversion of

    visit_foo(..., &err);
    if (err) {
        ...
    }

to

    if (!visit_foo(..., errp)) {
        ...
    }

for visitor functions that now return true / false on success / error.
Coccinelle script:

    @@
    identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
    expression list args;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err);
    -    if (err)
    +    if (!fun(args, &err))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Peter Maydell a0a8cf78e0 hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
Instead of logging guest accesses to invalid register offsets in this
device using zaurus_printf() (which just prints to stderr), use the
usual qemu_log_mask(LOG_GUEST_ERROR,...).

Since this was the only use of the zaurus_printf() macro outside
spitz.c, we can move the definition of that macro from sharpsl.h
to spitz.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-14-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Philippe Mathieu-Daudé 3b34ee6780 hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()
Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200524164503.11944-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-09 19:01:56 +02:00
Geert Uytterhoeven faf58e5369 ARM: PL061: Introduce N_GPIOS
Add a definition for the number of GPIO lines controlled by a PL061
instance, and use it instead of the hardcoded magic value 8.

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200519085143.1376-1-geert+renesas@glider.be
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21 22:05:27 +01:00
Markus Armbruster d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Philippe Mathieu-Daudé 6ae1a5a377 hw/gpio/aspeed_gpio: Remove dead assignment
Fix warning reported by Clang static code analyzer:

  hw/gpio/aspeed_gpio.c:717:18: warning: Value stored to 'g_idx' during its initialization is never read
      int set_idx, g_idx = *group_idx;
                   ^~~~~   ~~~~~~~~~~

Reported-by: Clang Static Analyzer
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422133152.16770-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04 14:43:24 +02:00
Peter Maydell c88311f272 hw/gpio/aspeed_gpio.c: Don't directly include assert.h
Remove a direct include of assert.h -- this is already
provided by qemu/osdep.h, and it breaks our rule that the
first include must always be osdep.h.

In particular we must get the assert() macro via osdep.h
to avoid compile failures on mingw (see the comment in
osdep.h where we redefine assert() for that platform).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200403124712.24826-1-peter.maydell@linaro.org
2020-04-03 19:24:53 +01:00
Thomas Huth 3ab5a6ece5 hw/*/Makefile.objs: Move many .o files to common-objs
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04 09:00:57 +01:00
Marc-André Lureau 4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Marc-André Lureau ba2aba8370 omap-gpio: remove PROP_PTR
Since clocks are not QOM objects, replace PROP_PTR of clocks with
setters methods.

Move/adapt the existing TODO comment about a clock framework.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-07 17:24:29 +04:00
PanNengyuan 15cea92d9e gpio: fix memory leak in aspeed_gpio_init()
Address Sanitizer shows memory leak in hw/gpio/aspeed_gpio.c:875

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: PanNengyuan <pannengyuan@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-16-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:34 +00:00
Cédric Le Goater 7811ce8185 hw/gpio: Fix property accessors of the AST2600 GPIO 1.8V model
The property names of AST2600 GPIO 1.8V model are one character bigger
than the names of the other ASPEED GPIO model. Increase the string
buffer size by one and be more strict on the expected pattern of the
property name.

This fixes the QOM test of the ast2600-evb machine under :

  Apple LLVM version 10.0.0 (clang-1000.10.44.4)
  Target: x86_64-apple-darwin17.7.0
  Thread model: posix
  InstalledDir: /Library/Developer/CommandLineTools/usr/bin

Cc: Rashmica Gupta <rashmica.g@gmail.com>
Fixes: 36d737ee82 ("hw/gpio: Add in AST2600 specific implementation")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191023130455.1347-2-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24 17:16:27 +01:00
Rashmica Gupta 36d737ee82 hw/gpio: Add in AST2600 specific implementation
The AST2600 has the same sets of 3.6v gpios as the AST2400 plus an
addtional two sets of 1.8V gpios.

Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-15-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:04 +01:00
Rashmica Gupta 4b7f956862 hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500
GPIO pins are arranged in groups of 8 pins labeled A,B,..,Y,Z,AA,AB,AC.
(Note that the ast2400 controller only goes up to group AB).
A set has four groups (except set AC which only has one) and is
referred to by the groups it is composed of (eg ABCD,EFGH,...,YZAAAB).
Each set is accessed and controlled by a bank of 14 registers.

These registers operate on a per pin level where each bit in the register
corresponds to a pin, except for the command source registers. The command
source registers operate on a per group level where bits 24, 16, 8 and 0
correspond to each group in the set.

 eg. registers for set ABCD:
 |D7...D0|C7...C0|B7...B0|A7...A0| <- GPIOs
 |31...24|23...16|15....8|7.....0| <- bit position

Note that there are a couple of groups that only have 4 pins.

There are two ways that this model deviates from the behaviour of the
actual controller:
(1) The only control source driving the GPIO pins in the model is the ARM
model (as there currently aren't models for the LPC or Coprocessor).

(2) None of the registers in the model are reset tolerant (needs
integration with the watchdog).

Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-2-clg@kaod.org
[clg: fixed missing header files
      made use of HWADDR_PRIx to fix compilation on windows ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13 16:05:00 +01:00
Markus Armbruster a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster 650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Peter Maydell d132baa05e Pull request
Compilation fixes and cleanups for QEMU 4.0.0.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcmPqkAAoJEJykq7OBq3PIlW8H/187SWabj/3VAXGxCHWdt4wM
 mHffnN2WzAkjCfZoraYXZH2MLVJaHDUfS7XN22uqucfK3K7BYtuJ4VeeU+l5iPK3
 yuZQi2p11XvKEZQhcx11OE9QLJoTGPuAiNNt+690Mk25mcmw2sunewH4YOoEYD9A
 Gsv43L0tPfplAkEKnk3WuheZTZMHXgtKTxaPSlDO3S2LXEJKnDSn3t9iqxMU7MZf
 2Y7PIkt//cXffOF5IrvNR9FOALpaz9UxuZmO7Dj607nYwanuK6qz/482FPioCOuY
 yojpZ65pfntHKhO3fsoZjsIR6TWgkTsAp4fMldoqM299YL5OWxJtR2TbnbIcoHM=
 =Ixbi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

Compilation fixes and cleanups for QEMU 4.0.0.

# gpg: Signature made Mon 25 Mar 2019 15:58:28 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace-events: Fix attribution of trace points to source
  trace-events: Delete unused trace points
  scripts/cleanup-trace-events: Update for current practice
  trace-events: Shorten file names in comments
  trace-events: Consistently point to docs/devel/tracing.txt
  trace: avoid SystemTap dtrace(1) warnings on empty files
  trace: handle tracefs path truncation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25 17:01:10 +00:00
Paolo Bonzini 4261b2f915 nrf51_gpio: reflect pull-up/pull-down to IRQs
Some drivers do I2C bitbanging by keeping the output to 0 and flipping
the GPIO direction between input and output (see for example in Linux
gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c).
When the GPIO is set to input, the pull-up resistor brings the output
to 1, while when the GPIO is set to output, the output driver brings
the output to 0.

Implement this for the nRF51 GPIO device model.  First, if both input and
output are floating, and there is a pull-up or pull-down resistor
configured, do not just set s->in, but also make any devices listening
on the output qemu_irq receive that value.  Second, if the pin is
driven both internally (output pin) and externally you don't get a
short circuit if both sides drive the pin to the same value.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190317141001.3346-1-pbonzini@redhat.com
[PMM: wrapped long line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25 14:16:46 +00:00
Markus Armbruster 500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Paolo Bonzini 1550b0e6bf i2c: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Corey Minyard 2ac4c5f4d2 i2c: have I2C receive operation return uint8_t
It is never supposed to fail and cannot return an error, so just
have it return the proper type.  Have it return 0xff on nothing
available, since that's what would happen on a real bus.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27 21:06:08 -06:00
Daniel P. Berrangé 7760636309 trace: enforce that every trace-events file has a final newline
When generating the trace-events-all file, the build system simply
concatenates all the individual trace-events files. If any one of those
files does not have a final newline, the printf format string will have
the contents of the first line of the next file appended to it, which is
usually a '#' comment.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-24 14:16:56 +00:00
Paolo Bonzini 7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Steffen Görtz 805f61bbb3 hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
This adds a model of the nRF51 GPIO peripheral.

Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf

The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).

The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 15:23:47 +00:00
Mao Zhongyi 671872b673 gpio/puv3_gpio: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_gpio_class_init().

Cc: gxt@mprc.pku.edu.cn
Cc: peter.maydell@linaro.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-8-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:58 +00:00
Philippe Mathieu-Daudé c8c9e10394 hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init
I2CSlaveClass::init is no more used, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.26095-3-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180528144509.15812-3-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 15:14:31 +02:00
Alistair Francis a89f364ae8 Replace all occurances of __FUNCTION__ with __func__
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.

One line in hcd-musb.c was manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-22 09:46:18 +01:00
Peter Maydell 940caf1f7e hw/gpio/omap_gpio.c: Don't use old_mmio
Drop the use of old_mmio in the omap2_gpio memory ops.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505580378-9044-3-git-send-email-peter.maydell@linaro.org
2017-09-21 16:34:27 +01:00