Modifed from Richard Henderson's patch [1] to integrate
with the new control and status register implementation.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg07034.html
Note: the f* CSRs already mark mstatus.FS dirty using
env->mstatus |= mstatus.FS so the bug in the first
spin of this patch has been fixed in a prior commit.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Also the files mentioned the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1549266858-5043-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
PA-RISC specification says: "Setting the PSW Q-bit, PSW{28}, to 1
with this instruction, if it was not already 1, is an undefined
operation." However, at least HP-UX 10.20 sets the Q bit from 0 to 1
with the SSM instruction. Tested this both on HP9000/712 and
HP9000/785/C3750, both machines set the Q bit from 0 to 1 without
exception. This makes HP-UX 10.20 progress a little bit further.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190129191402.29539-1-svens@stackframe.org>
[rth: Add a comment to the code as well.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While doing 'set $pcoqh=0xf0000000' i triggered the assertion below.
The argument order for deposit64() is wrong, and val needs to be
moved to the end.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190128165333.3814-1-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Implement Armv8.5-BTI extension for system emulation mode
* Implement the PR_PAC_RESET_KEYS prctl() for linux-user mode's Armv8.3-PAuth support
* Support TBI (top-byte-ignore) properly for linux-user mode
* gdbstub: allow killing QEMU via vKill command
* hw/arm/boot: Support DTB autoload for firmware-only boots
* target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
-----BEGIN PGP SIGNATURE-----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=XEy2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190205' into staging
target-arm queue:
* Implement Armv8.5-BTI extension for system emulation mode
* Implement the PR_PAC_RESET_KEYS prctl() for linux-user mode's Armv8.3-PAuth support
* Support TBI (top-byte-ignore) properly for linux-user mode
* gdbstub: allow killing QEMU via vKill command
* hw/arm/boot: Support DTB autoload for firmware-only boots
* target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
# gpg: Signature made Tue 05 Feb 2019 17:04:22 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190205: (22 commits)
target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
hw/arm/boot: Support DTB autoload for firmware-only boots
hw/arm/boot: Clarify why arm_setup_firmware_boot() doesn't set env->boot_info
hw/arm/boot: Factor out "set up firmware boot" code
hw/arm/boot: Factor out "direct kernel boot" code into its own function
hw/arm/boot: Fix block comment style in arm_load_kernel()
gdbstub: allow killing QEMU via vKill command
target/arm: Enable TBI for user-only
target/arm: Compute TB_FLAGS for TBI for user-only
target/arm: Clean TBI for data operations in the translator
target/arm: Add TBFLAG_A64_TBID, split out gen_top_byte_ignore
tests/tcg/aarch64: Add pauth smoke test
linux-user: Implement PR_PAC_RESET_KEYS
target/arm: Enable BTI for -cpu max
target/arm: Set btype for indirect branches
target/arm: Reset btype for direct branches
target/arm: Default handling of BTYPE during translation
target/arm: Cache the GP bit for a page in MemTxAttrs
exec: Add target-specific tlb bits to MemTxAttrs
target/arm: Add BT and BTYPE to tb->flags
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The {IOE, DZE, OFE, UFE, IXE, IDE} bits in the FPSCR/FPCR are for
enabling trapped IEEE floating point exceptions (where IEEE exception
conditions cause a CPU exception rather than updating the FPSR status
bits). QEMU doesn't implement this (and nor does the hardware we're
modelling), but for implementations which don't implement trapped
exception handling these control bits are supposed to be RAZ/WI.
This allows guest code to test for whether the feature is present
by trying to write to the bit and checking whether it sticks.
QEMU is incorrectly making these bits read as written. Make them
RAZ/WI as the architecture requires.
In particular this was causing problems for the NetBSD automatic
test suite.
Reported-by: Martin Husemann <martin@netbsd.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190131130700.28392-1-peter.maydell@linaro.org
This has been enabled in the linux kernel since v3.11
(commit d50240a5f6cea, 2013-09-03,
"arm64: mm: permit use of tagged pointers at EL0").
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enables, but does not turn on, TBI for CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-4-richard.henderson@linaro.org
[PMM: adjusted #ifdeffery to placate clang, which otherwise complains
about static functions that are unused in the CONFIG_USER_ONLY build]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will allow TBI to be used in user-only mode, as well as
avoid ping-ponging the softmmu TLB when TBI is in use. It
will also enable other armv8 extensions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out gen_top_byte_ignore in preparation of handling these
data accesses; the new tbflags field is not yet honored.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is all of the non-exception cases of DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190128223118.5255-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The branch target exception for guarded pages has high priority,
and only 8 instructions are valid for that case. Perform this
check before doing any other decode.
Clear BTYPE after all insns that neither set BTYPE nor exit via
exception (DISAS_NORETURN).
Not yet handled are insns that exit via DISAS_NORETURN for some
other reason, like direct branches.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Caching the bit means that we will not have to re-walk the
page tables to look up the bit during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190128223118.5255-6-richard.henderson@linaro.org
[PMM: no need to OR in guarded bit status]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place this in its own field within ENV, as that will
make it easier to reset from within TCG generated code.
With the change to pstate_read/write, exception entry
and return are automatically handled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also create field definitions for id_aa64pfr1 from ARMv8.5.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost user blk discard/write zeroes features
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcWbMUAAoJECgfDbjSjVRp2acH+wa8abfyQIpVMji+cdvcw7Wo
yJjCoPxX0y+tm7FGp6YjyyQhSzjUYRS+71NL6xkZVxs8yh4ZCbb/xDRYmrVG2cb6
6tUcqp1zlMp+w+kVKS4m4WTb0Z1bIODOi99tNBXxYjWY9lXF/hjZbhRpt6vL/NaP
hqYtp+wlhyjxsY/GFn5XZLY7F6+QKq/lsMJD80FvbtHBh/ngqmgyoouNwYzg1faW
M3wD5A3IOXLzU+MGK6uCtKK0+t3xzvaVJL7zChimKkn+y+Pg9T+s04zQS739bJRg
dYYrVK3IOt2tvVxBZnnUm9eBIxxElAxRssmERPe2i0mBRSXYKomuVZrXJ6ROhjA=
=TxWc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, features
vhost user blk discard/write zeroes features
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Feb 2019 16:00:20 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
contrib/libvhost-user: cleanup casts
r2d: fix build on mingw
mmap-alloc: fix hugetlbfs misaligned length in ppc64
mmap-alloc: unfold qemu_ram_mmap()
i386, acpi: cleanup build_facs by removing second unused argument
fw_cfg: fix the life cycle and the name of "qemu_extra_params_fw"
acpi: Make TPM 2.0 with TIS available as MSFT0101
hw/virtio: Use CONFIG_VIRTIO_PCI switch instead of CONFIG_PCI
vhost-user-blk: add discard/write zeroes features support
contrib/vhost-user-blk: fix the compilation issue
pci/msi: export msi_is_masked()
intel_iommu: reset intr_enabled when system reset
intel_iommu: fix operator in vtd_switch_address_space
hw: virtio-pci: drop DO_UPCAST
include: update Linux headers to 4.21-rc1/5.0-rc1
scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1)
contrib/libvhost-user: switch to uint64_t
virtio: add checks for the size of the indirect table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The machine that with hvf accelerator and smp sometimes boot hangs
because all processors are executing instructions at startup,
including early I/O emulations. We should just allow the bootstrap
processor to initialize the machine and then to wake up slave
processors by interrupt.
Signed-off-by: Heiher <r@hev.cc>
Message-Id: <20190123073402.28465-1-r@hev.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The machine description we send is being (silently) thrown on the floor
by GDB and GDB silently uses the default machine description, because
the xml parse fails on <feature> nested within <feature>.
Changes to the xml in qemu source code have no effect.
In addition, the default machine description has fs_base, which fails to
be retrieved, which breaks the whole register window. Add it and the
other control registers.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20190124040457.2546-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 16-bit addressing mode, when Mod = 0 and R/M = 6, decoded displacement
doesn't reach decode_linear_addr and gets lost. Instructions that
involve the combination of ModRM always get a pointer with zero offset
from the beginning of DS segment.
The change fixes drawing in F-BIRD from day 1 of '18 advent calendar.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20190125154743.14498-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MPX support is being phased out by Intel and actually I am not sure that
OS X has ever enabled it in XCR0. Drop it from the Hypervisor.framework
acceleration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 5131dc433d.
For new instruction 'PCONFIG' will not be exposed to guest.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1545227081-213696-3-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Processor tracing is not yet implemented for KVM and it will be an
opt in feature requiring a special module parameter.
Disable it, because it is wrong to enable it by default and
it is impossible that no one has ever used it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCONFIG is not available to guests; it must be specifically enabled
using the PCONFIG_ENABLE execution control. Disable it, because
no one can ever use it.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1545227081-213696-2-git-send-email-robert.hu@linux.intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- fix CPU wakeup on runstall changes; expose runstall as an IRQ line;
- place mini-bootloader at the BSP reset vector;
- expose CPU core frequency in XTFPGA board FPGA register;
- rearrange access to external interrupts of xtensa cores;
- add MX interrupt distributor and use it on SMP XTFPGA boards;
- add test_mmuhifi_c3 xtensa core variant;
- raise number of CPUs that can be instantiated on XTFPGA boards.
-----BEGIN PGP SIGNATURE-----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=8D60
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20190204-xtensa' into staging
target/xtensa: SMP updates and various fixes
- fix CPU wakeup on runstall changes; expose runstall as an IRQ line;
- place mini-bootloader at the BSP reset vector;
- expose CPU core frequency in XTFPGA board FPGA register;
- rearrange access to external interrupts of xtensa cores;
- add MX interrupt distributor and use it on SMP XTFPGA boards;
- add test_mmuhifi_c3 xtensa core variant;
- raise number of CPUs that can be instantiated on XTFPGA boards.
# gpg: Signature made Mon 04 Feb 2019 18:59:32 GMT
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20190204-xtensa:
hw/xtensa: xtfpga: raise CPU number limit
target/xtensa: add test_mmuhifi_c3 core
hw/xtensa: xtfpga: use MX PIC for SMP
target/xtensa: add MX interrupt controller
target/xtensa: expose core runstall as an IRQ line
target/xtensa: rearrange access to external interrupts
target/xtensa: drop function xtensa_timer_irq
target/xtensa: fix access to the INTERRUPT SR
hw/xtensa: xtfpga: use core frequency
hw/xtensa: xtfpga: fix bootloader placement in SMP
target/xtensa: add qemu_cpu_kick to xtensa_runstall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As floating point registers overlay some vector registers and we want
to make use of the general tcg_gvec infrastructure that assumes vectors
are not stored in globals but in memory, don't model floating point
registers as globals anymore. This is then similar to how arm handles
it.
Reading/writing a floating point register means reading/writing memory now.
Break up ugly in2_x2() handling that modifies both, in1 and in2 into
in2_x2l and in2_x2h. This makes things more readable. Also, in1_x1() is
ugly as it touches out/out2, get rid of that and use prep_x1() instead.
As we are no longer able to use the original global variables for
out/out2, we have to use new temporary variables and write from them to
the target registers using wout_ helpers.
E.g. an instruction that reads and writes x1 will use
- prep_x1 to get the values into out/out2
- wout_x1 to write the values from out/out2
This special handling is needed for x1 as it is often used along with
other inputs, so in1/in2 is already used.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190204154406.16122-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I plan to deprecate -mem-path option and replace it with memory-backend,
for that it's necessary to get rid of mem_path global variable.
Do it for s390x case, replacing it with alternative way to enable
1Mb hugepages capability.
Todo that replace qemu_mempath_getpagesize() with qemu_getrampagesize()
which also checks for -mem-path provided RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1548834906-133241-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
MTTCG should be enabled by default whenever the memory model allows
it. s390x was missing its definition of TCG_GUEST_DEFAULT_MO meaning
the user had to manually specify --accel tcg,thread=multi.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Message-Id: <20190118171848.27332-1-alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Following on from the previous work, there are numerous endian-related hacks
in int_helper.c that can now be replaced with Vsr* macros.
There are also a few places where the VECTOR_FOR_INORDER_I macro can be
replaced with a normal iterator since the processing order is irrelevant.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Richard points out that these macros suffer from a -fsanitize=shift bug in that
they improperly handle n == 0 turning it into a shift by 32/64 respectively.
Replace them with QEMU's existing ror32() and ror64() functions instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As pointed out by Richard: it does not need the mask argument, nor does it need
the recast argument. The masking is implied by the cast argument, and the
recast is implied by the assignment.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These macros can be eliminated by instead using the relavant Vsr* macros in
the few locations where they appear.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The original purpose of these macros was to correctly reference the high and low
parts of the VSRs regardless of the host endianness.
Replace these direct references to high and low parts with the relevant VsrD
macro instead, and completely remove the now-unused HI_IDX and LO_IDX macros.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current implementations make use of the endian-specific macros HI_IDX and
LO_IDX directly to calculate array offsets.
Rework the implementation to use the Vsr* macros so that these per-endian
references can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current implementations make use of the endian-specific macros MRGLO/MRGHI
and also reference HI_IDX and LO_IDX directly to calculate array offsets.
Rework the implementation to use the Vsr* macros so that these per-endian
references can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These fields have now been replaced by equivalents under the machine
data.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This prepares us for eliminating the use of direct array access within the VMX
instruction implementations.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It has been there since the enablement of PR KVM for PAPR, ie, commit
f61b4bedaf in 2011. Not sure why at that time, but it is definitely
not needed with the current code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A flawed test lead to the instructions always being treated as
unallocated encodings.
Fixes: https://bugs.launchpad.net/bugs/1813460
Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since QEMU does not support the ARMv8.2-LVA, Large Virtual Address,
extension (yet), the VA address space is 48-bits plus a sign bit. User
mode can only handle the positive half of the address space, so that
makes a limit of 48 bits.
(With LVA, it would be 53 and 52 bits respectively.)
The incorrectly large address space conflicts with PAuth instructions,
which use bits 48-54 and 56-63 for the pointer authentication code. This
also conflicts with (as yet unsupported by QEMU) data tagging and with
the ARMv8.5-MTE extension.
Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the pac properties. This approach cannot work as written
because the properties are applied before arm_cpu_reset, which
zeros SCTLR_EL1 (amongst everything else).
We can re-introduce the properties if they turn out to be useful.
But since linux 5.0 enables all of the keys, they may not be.
Fixes: 1ae9cfbd47
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
